Next time you have a barrel fitted, consider having your gunsmith create a “stub gauge” from a left-over piece of barrel steel (ideally taken from your new barrel blank). The outside diameter isn’t important — the key thing is that the stub gauge is created with the same reamer used to chamber your current barrel, and the stub must have the same bore diameter, with the same land/groove configuration, as the barrel on your rifle. When properly made, a stub gauge gives you an accurate three-dimensional model of the upper section of your chamber and throat. This comes in handy when you need to bump your case shoulders. Just slide a fired case (with spent primer removed) in the stub gauge and measure from base of case to the end of the gauge. Then, after bumping, re-measure to confirm how much you’ve moved the shoulder.
In addition, the stub gauge lets you measure the original length to lands and freebore when your barrel was new. This gives you a baseline to accurately assess how far your throat erodes with use. Of course, as the throat wears, to get true length-to-lands dimension, you need take your measurement using your actual barrel. The barrel stub gauge helps you set the initial bullet seating depth. Seating depth is then adjusted accordingly, based on observed throat erosion, or your preferred seating depth.
Forum member RussT explains: “My gunsmith [makes a stub gauge] for me on every barrel now. I order a barrel an inch longer and that gives him enough material when he cuts off the end to give me a nice case gauge. Though I don’t have him cut that nice-looking window in the side (as shown in photos). That’s a neat option. You can tell how much throat erosion you are getting from when it was new as well. For measuring initial seating depths, this is the most useful item on my loading bench next to calipers. Everyone should have a case gauge made by their smith if you have a new barrel put on.”
Forum member Lawrence H. has stub gauges made with his chamber reamers for each new barrel He has his smith cut a port in the stub steel so Lawrence can actually see how the bullet engages the rifling in a newly-cut chamber. With this “view port”, one can also see how the case-neck fits in the chamber. Lawrence tells us: “My stub gauges are made from my barrels and cut with my chamber reamers. With them I can measure where my bullets are ‘touching the lands’ and shoulder bump dimensions. This is a very simple tool that provides accurate information.” The photos in this article show the stub gauges made for Lawrence by his gunsmith.
2019 will be a big year for Lyman. This company is rolling out a number of new products, including three unveiled today: a variable-speed case trimmer, a universal press stand, and a really nice shooting mat. We think all three products offer some very cool features and a lot of performance for the price.
For 2019, Lyman offers the Case Trim Xpress, a new, affordable variable-speed case trimmer with a razor-sharp CARBIDE CUTTER. Available in either 115V or 230V, the Case Trim Xpress can quickly and accurately trim brass at a rate of approximately 15 cases a minute. The unit has its own power source, and a strong variable-speed motor, so there is no need to use power drills. Using the 10 provided bushings, the unit indexes off the case shoulder — that’s simple, fast and reliable. Plus a precision trim adjustment wheel allows case lengths to be easily “dialed in” to 0.001″ increments. To trim your brass, simply push the case against the carbide cutter until the shoulder stops on the bushing (with precise case OAL set by the wheel). The Case Trim Xpress comes with 10 bushings that fit the most popular bottleneck rifle cartridges, so no pilots are needed. Expected retail price is around $140.00.
Fast and accurate — trims approximately 15 cases per minute
Variable speed motor and ultra-sharp, long-lasting carbide cutter
Utilizes case shoulders for centering and indexing cases (not for straight-walled cases)
Comes with 10 bushings fitting the most popular bottleneck rifle cartridges — no pilots needed.
Compact, low-profile design uses minimal bench space
Lyman says that its new Lyman Press Stand is the only press stand on the market that will accept most current single station, turret and progressive presses of any brand. The stand is heavy-duty steel for strength, pre-drilled for common presses. It will elevate your press 9 ¼” above the bench, providing a clear view of all reloading operations while keeping the operator in an upright, back-healthy position. Raising your press can reduce fatigue while giving you extra room (below) to hold bullet boxes and dies.
Press Stand Fits All these Presses and More:
Lyman: All-American 8 Turret, Crusher, Ideal C-Frame, T-Mag, Victory
RCBS: Rock Chucker, Rock Chucker Supreme, RCBS 6 Turret, Pro 2000
Lee: Load Master, Pro 1000, Classic, Value Turret
Hornady: AP, Iron, Lock-N-Load Classic
Dillon: 550, 650, Square Deal
Redding: T7 Turret
Tac-Mat Long Range Shooting Mats
For 2019 Lyman will offer new Tac-Mat Long Range Shooting mats — in both standard and HD padded versions. These mats are long enough for tall shooters, but they still can be rolled into a compact, easy to transport size. The Tac-Mat will be offered in two versions: a basic design in 600D construction with a carry handle and shoulder strap, or the heavy-duty version (HD) in 1000D construction with elbow pads, a built-in bipod stop, carry handle and shoulder strap. We like these new mats — a lot of smart thinking went into their designs and features.
Savage will launch 40 new products at the 2019 SHOT Show in Las Vegas. This will be a big year for Savage as 2019 marks Savage’s 125th Anniversary. The brand is celebrating the historic event by offering limited-edition rifles as well as many new offerings in bolt-action rifles, AR-platform rifles, and shotguns. “Whether you are looking for a training rifle, a competition-grade modern sporting rifle, a reliable shotgun for hunting or personal defense, or a lightweight hunting rifle packaged with a scope, Savage has those needs covered, plus more”, said Savage’s Marketing Director, Beth Shimanski.
New 2019 Product Launch Highlights
The company is expanding and improving its popular XP scoped rifle lines. New models include the 110 Apex XP series, featuring Vortex scopes, and a pint-sized Rascal Target XP. Plus, the existing AXIS XP series has been upgraded with a new modernized stock. The AccuFit system lets shooters quickly adjust comb height and length-of-pull. The feature is an integral part of a new long-range rifle with a superior finish, the 110 High Country, featured below:
Savage is expanding the popular XP scoped rifle lines. New models include the 110 Apex XP series, featuring Vortex scopes, and a pint-sized Rascal Target XP. Plus, the existing AXIS XP series has been upgraded with a new modernized stock.
Savage’s MSR 15 and MSR 10 AR-platform rifle series will include new options for long range, precision and competition shooting. These rifles are not cookie-cutter AR clones. The MSR Savages have some interesting upgrades, such as side-charging handles (on MSR 10), Magpul PRS stocks, adjustable gas blocks, and tunable muzzle brakes. The MSRs also enjoy a good reputation for build quality and reliability.
All of these new rifles, as well as more bolt-action and semi-automatic centerfire and rimfire rifles, will be on display at SHOT Show Booth No. 14551 January 22-25, 2019 at the Sands Expo Center.
A couple seasons back we published our comprehensive 6.5×47 Lapua Cartridge Guide, researched by the 6.5 Guys. In case you’ve been wondering what kind of accuracy is possible for a tactical-type rifle chambered for this mid-sized cartridge, check out this tack-driver built by gunsmith Ryan Pierce. That’s a mighty impressive 0.206″ five-shot group fired with Berger 140gr Hybrids using a Brux cut-rifled barrel. The powder was Hodgdon H4350, a very good choice for this cartridge.
Ryan reports: “Here is a 6.5×47 I built for a customer. It features a trued Rem 700 action, Brux 1:8″ Rem varmint-contour barrel, Mcmillan thumbhole stock, Surgeon bottom metal, and 3-port muzzle brake. The customer’s preferred load is the same that has worked in the last couple dozen 6.5x47s I’ve built: 41.1-41.3 grains of H4350 with 140 hybrids .050″ off the lands. This should run about 2810-2815 fps from a 26″ barrel. The 3.128″ refers to length of a loaded round from the base to ogive including the Hornady ogive comparator tool.”
Yep, It Measures Up…
Lest anyone dispute Ryan’s measurement of this group (the internet is full of nay-sayers), 0.206″ is EXACTLY what we got when we measured this group using OnTarget software. See for yourself:
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Brownells — Marlin 336Y .30-30 Lever Gun, $389.99 with Code
We think everyone should have a lever gun in their collection, and here’s an exceptional value — Marlin’s model 336Y for just $389.99. The 336Y (for “youth”) has a shorter stock that makes it suitable for younger hunters. The .30-30 Winchester chambering may seem dated, but plenty of bucks have been taken with the venerable .30-30 round. This lever-action rifle features 5-shot tubular magazine, side ejection, and Buckhorn sights. Just 34″ overall, with 16.25″ barrel and weighing only 6 pounds, Marlin’s 336Y can also be a very effective home defense arm. This gun lists for $399.99 with a $10.00 FFL handling fee. Use CODE M8Y to save $20 with FREE shipping, reducing your net cost to $389.99 delivered. NOTE: Brownells has other discount codes: Code LAV ($10 off $100 + free S/H) and Code NCS ($15 off $150 plus free S/H).
2. Al’s — Vortex Razor HD 20-60x85mm Spotting Scope, $809.99
AMAZING DEAL — save $390.00! Other vendors sell this very same Razor HD spotter for $1199.
Here’s a great deal on a high-quality spotting scope from a top optics maker. AL’s Sporting Goods has last year’s model Vortex Razor 20-60x85mm spotter for only $899.99, including eyepiece. This impressive HD-glass spotter sells elsewhere for $1200.00. But it gets better — use Code ALS10 for another 10% Off, bringing the final price down to $809.99. This is a very good spotter for the money and as Vortex will tell you, “buy a Razor now and we’ll always replace it with a Razor in the future”.
3. CCI and Federal .22 LR Rimfire Rebate — Save up to 20%
Get paid back when you buy Federal or CCI .22 LR rimfire ammunition. For every 5 boxes of Federal or CCI Rimfire Ammunition you buy, you will receive a rebate of the cost of one (1) box. The rebate amount will equal the purchase price of the LOWEST-cost box of the five. This rebate program is offered for most Federal and CCI .22 LR ammo. The maximum rebate is $200 per household. Print off your redemption form from links below. NOTE: This deal is good through the end of March, 3/31/2019. Purchase qualifying ammo from vendors including Bruno’s, Graf’s, Midsouth, Powder Valley, and Precision Reloading.
Everyone loves reactive targets, and hitting steel is particularly fun with a .22 LR rimfire — you can plink safely at relatively close range. Here is a nicely-designed, self-resetting target at a remarkably low price — just $19.88. Heck you could pay that much for a couple packs of paper targets, and this Range Ready .22 Popper target should last for years (just don’t shoot centerfire ammo at it!). These resetting popper targets are just plain fun to shoot. Plus they are cheap enough that your club could buy a half-dozen or more for use in rimfire tactical matches.
Note: You get one set of muffs (either gray or camo, NOT both) for $8.88 plus S/H.
Good muffs that offer 27 db Noise Reduction and won’t spoil your cheekweld — for under ten bucks? Can’t argue with that. Right now CDNN is offering a killer deal on Kryptek Sound Soldier 27 NRR muffs that sell elsewhere for around $24.00. Get these in either Highlander Camo or Typhon Grey for just $8.88. These passive muffs have low profile shells engineered to stay out of the way when shouldering your weapon. The ergonomic headband keeps the muffs aligned, in their proper position. Purchasers report the soft leatherette ear seals are surprisingly comfortable. These muffs provide a pretty high NRR considering the low profile design. And the price, just $8.88 on sale, is hard to beat! NOTE: Other vendors have a more conservative 25 NRR for these type of muffs. That’s still quite good.
6. Midsouth — Lyman Brass Smith Ideal Press, $69.99
Lyman’s new Ideal compact press works great as a second, lighter-duty press. It also is a good choice for loading at the range. It can easily be mounted to a range bench with C-clamps. With its cast-iron body, this C-Frame press is stronger than other presses in its price class. If you are looking for a secondary press for de-capping, bullet-seating and other tasks not requiring heavy leverage, this is an excellent choice. The Lyman Ideal costs just $69.99 at Midsouth Shooters Supply.
Still laying on the ground or using your wife’s yoga mat for shooting? For $24.99 now you can grab this NcStar Vism shooting mat and give your knees, belly, and elbows a break from the ground below. It opens wide and even has straps for pre-loading your bipod. This is a quality pad that helps put some space between you and your rocky position. When you’re done simply fold in the edges, roll it up and it takes up the same or less space as a sleeping bag. This is a good product tested and used by our staff.
8. Walmart — 46″ Workbench with LED light, $49.00
Are you looking for a solid workstation to reload or gunsmith on? This Walmart 46″ Workbench is solid, easy to assemble, and comes with an LED light, peg hooks, plus drawer liner. That’s a lot of bench for $49.00 especially considering how much you can store under it or in the drawer. The advantage of the LED light is that it won’t affect delicate electronic scales.
9. Amazon — Neiko Digital Calipers, $17.85
Even if you have a good set of calipers, you may want to get one of these Neiko 01407A Digital Calipers. The #1 best-selling digital caliper on Amazon.com, this Neiko tool features a large LCD Screen and measures up to 6.0 inches. With over 3800 customer reviews, this product has earned an overall rating of 4.4 out of 5 stars. It’s hard to go wrong for $17.85, even if you just use these as a spare set for measuring group sizes and case trim lengths.
If you’ve ever used a Harris Swivel Bipod, you know that, without tools, it is difficult to put enough tension on the swivel locking knob to really lock the unit solid. And, if you do manage to get the knob really tight (perhaps by using pliers), it is difficult to loosen with fingers alone.
That was why Terry Cross and the folks at KMW Long Range Solutions invented the Pod-Loc™. This system replaces the knurled swivel tension knob with a push-button adjustable handle. Using the handle you can easily set the swivel tension at any level from loose to “rock solid”. And you can release tension to adjust the bipod to different terrain just as easily. The genuine KMW Pod-Loc™ retails for $26.99 at Brownells.com.
How to Build Your Own Bipod Swivel Locking System
While we use genuine KMW Pod-Locs on our rifles, readers on a tight budget, or who have a large collection of bipod-equipped rifles, can economize by putting together their own swivel locking systems from off-the-shelf components. You can buy suitable levers from www.T-Nuts.com. This vendor offers a variety of appropriate handles, ranging in price from $7.00 to $10.00. So, by sourcing the parts, you can outfit three bipods with swivel adjusters for the cost of one Pod-Loc.
We recommend the Nylon/Stainless BPL/NS model ($7.70), but you may prefer the all-metal BPL-ZS ($8.50), or the shorter BPL-Micro model ($8.25). The compact Micro lock does not protrude past the body of the bipod, yet is still easily grasped. T-Nuts supplies one 3/16″ spacer with most of its bipod handles. T-Nuts handles are also available with a metric M6x1.0 thread for use with imported bipods such as Outers and Rockport.
Installation is Easy — With the Right Socket
To install a swivel locking system, first you’ll need a 1/4″ socket to remove the keeper nut from the threaded pivot rod. (During this process, you’ll need to keep pressure on the pivot rod retaining pin on the opposite side of the bipod.) Don’t try to remove the keeper nut with pliers or an open-end wrench. You really need the correct socket. Once that keeper nut is removed, then unscrew the knurled tension knob/ring. This is attached to the same threaded shaft as the keeper nut but you should be able to remove it without tools.
After the knurled tension ring is off, it is easy to put your handle on the bipod. First slip the 3/16″ spacer over the threaded pivot rod. Keeping finger pressure on the pivot rod retaining pin (on reverse side), then spin on the T-Nuts handle. Rotate the handle inwards until it firmly locks the bipod swivel mechanism. By pushing the button in the head of the handle, you can swing the handle left or right to set its position without altering the swivel tension.
Hand-loaders have never had so many great choices in single-stage presses, with many different configurations and features. There are classic O-Frame presses, Coax-style presses, Open-front presses, Pyramid presses, and compact C-Frame presses. Here is our 2019 Single Stage Press Showcase with products from Forster, Frankford Arsenal, Hornady, Lee, Lyman, MEC, and RCBS. We’ve included short videos showing the features of these reloading presses.
If you are shopping for a new press you should look at the various features of each. You may prefer something classic like a Rock Chucker, or the innovative open-front MEC. If you are looking for a compact press to use at the range, the new Lyman C-Frame is very impressive for the price. And the Forster Co-Ax remains a great addition to any loading room.
MEC Marksman Single-Stage Press
If you are looking for a new, full-size single-stage reloading press, definitely consider the MEC Marksman. Created by the makers of the popular MEC shotshell reloading systems, the MEC Marksman combines a sturdy cast-iron frame with a modern open-front design. With a $189.99 street price the Marksman press cost roughly $20 more than an RCBS Rock Chucker, but the MEC offers some distinct advantages — such as an open front plus a floating shell-holder system.
Our friend Gavin Gear of UltimateReloader.com got his hands on a MEC Marksman press and put it through its paces. He came away impressed with the product, saying it delivers excellent performance, and has many impressive features. Gavin tells us: “Cast iron tools and machines are a lifetime investment. The made-in-USA MEC Marksman features ductile cast-iron construction, an open-front frame design for easy cartridge access, a new floating shell-holder design with a unique retention system, and ambidextrous handle setup.” MEC also offers a wide selection of accessories for the Marksman press, including a press riser/mount, shell-holder caddy, and die trays.
Frankford Arsenal M-Press Coaxial Reloading Press
Sorry, this new Frankford Arsenal coaxial M-Press has not started shipping yet so we don’t have a video. But MidwayUSA says it should arrive by mid-February 2019. We think this new M-Press should interest Forster Co-Ax fans. While the operation is similar to the Forster Co-Ax, there are some important differences. The new M-Press mounts on a flat surface, with nothing protruding below. That is significantly different than the Forster Co-Ax. The die block is different. It also appears that the shell-holder system is different. But this still self-aligns like a Forster Co-Ax. “A free-floating design allows the die and shellplate to move on two axis, so the case is always perfectly centered in the die, minimizing bullet runout.” The way the arms move is also different. In the Forster Co-Ax, the rods slide within the press frame and the part that holds the shell is fixed to them. In this design the rods are stationary and the part that holds the shell slides on them. However, the overhead handle certainly does copy the distinctive Forster design. NOTE: According to MidwayUSA, this M-Press does NOT have priming capability, unlike the Forster Co-Ax. Credit Boyd Allen for design analysis.
Forster Co-Ax Press
If you are not yet familiar with the many unique features of the Forster Co-Ax, we recommend you watch the video above, a very thorough video review by Rex Roach. This shows how the press operates and highlights the design elements which set the Co-Ax apart from every other reloading press on the market. This 14-minute video shows the key Co-Ax features, explaining how the floating case-holder jaws work (3:30 time-mark), how the dies are held in place (4:40 time-mark), how spent primers are captured (6:10 time-mark), and how to set the primer seating depth (10:00 time-mark). We’ve used a Co-Ax for years and we still learned a few new things by watching this detailed video. If you are considering purchasing a Co-Ax, definitely watch this video start to finish.
In recent years, Forster Co-Ax® presses have been somewhat hard to find, as demand has out-stripped supply. The Co-Ax has many dedicated fans, given its unique features, such as the floating case-holder jaws, and easy, rapid slide-in/slide-out die placement. We’ve also found that Co-Ax presses load very straight ammo and we like the ability to switch between short handle (good for bullet seating) and long handle (ideal for heavy case-sizing tasks). We also think the Forster Co-Ax has one of the best spent primer capture systems on the market — a straight drop into a removable plastic cup. Simple and it works.
Lyman Brass Smith Victory Single-Stage Press
Lyman’s New Victory Single-stage Press competes with the RCBS Rock Chucker Press. With beefy cast iron construction, the Victory’s strength and leverage rivals the Rock Chucker. If you like to prime on a press, this Victory has a priming system that’s much easier to use than the Rock Chucker system. The priming tube is right up front. Simply push the shuttle at the button of the tube to advance the primer into place. The entire primer-loading system can also be removed so it doesn’t interfere with case and bullet-handling operations. We generally prefer to prime cases separately using a dedicated hand- or bench-mounted tool, but the Victory press does the job nicely. Overall, the Victory is a great value in a full-size “O-Frame” press. It’s on sale now for $154.99 at Midsouth.
RCBS Rock Chucker Supreme Single-Stage Press
Nearly every serious hand-loader has owned or used the RCBS Rock Chucker press. This Editor still uses a Rock Chucker passed down by his brother 20 years ago. And yes, it is still going strong. The latest Rock Chucker Supreme single-stage press features an improved “upside-down Y-path” dual-bin spent primer catcher. Otherwise the Rock Chucker Supreme remains big, strong, versatile and sturdy. It has very strong linkages, with a compound leverage system providing plenty of power — FL-sizing is a breeze even with large, magnum cases. The 1″-diameter ram has 12.5 sq. inches of ram-bearing surface.
Some people may not know that the Rock Chucker offers a secondary 1 1/4″ x 12 thread for shotshell reloading dies and Piggyback 3 upgrade. The Rock Chucker Supreme retails for under $180.00 ($167.50 now at Bruno’s). The RCBS Rock Chucker is definitely a quality product that can last a lifetime. For heavy-duty sizing chores this remains one of the best choices in single-stage presses. We do recommend shopping around. You can sometimes get a pretty big discount on Rock Chuckers and RCBS has regular rebate programs.
Lyman Brass Smith Ideal C-Frame Compact Press
The Lyman Brass Smith Ideal Press is a very affordable, cast iron C-Frame reloading press. We think it is the new “class leader” in compact presses. This works great as a secondary press for your reloading room or a small press you can take to the range. The large front opening allows you to access the shell holder without hitting the support bar on other types of presses. Unlike other compact presses made from aluminum, Lyman’s Ideal press is cast iron so it is rigid and strong. The high-quality steel ram is one inch in diameter. The Brass Smith is a true ambidextrous press that can be accessed from either side and mounted the same. This is a great choice for a second, auxiliary press for depriming and bullet seating.
Hornady Iron Single Stage (Open-front) Press
In this “Reloading with Rosie” video, the attractive female host loads some ammo using the Hornady Iron Press. With a beefy, pyramid-style cast-iron frame with an open front, this press offers some advantages over a traditional “O-Frame” type press. Access is considerably easier, for one thing. And the top of the press includes slots to hold dies and tools — that’s really a very nice feature that saves time. Also an optional “automatic” priming system shuttles primers from a vertical tube in the back to the shell-holder in the front. That’s clever. Over all the Iron Press is a nice piece of engineering — good job Hornady.
Lee Classic Cast (Iron) Breech Lock Press
The Lee Classic Cast Breech Lock Press offers excellent value for the money ($112.00 at Midsouth). Based on the proven design of the Classic Cast press, the updated Breech Lock series adds the quick-change die bushing and an improved primer drop system. This press is strong, with cast iron frame, all-steel linkage, and 12 square inches of ram bearing surface.
Lee says this press has the “largest opening and the longest stroke in the industry” among O-frame type presses. The handle can be mounted on either side. We love the fact that the handle angle can be adjusted, as well as the lever arm length — that allows you to adjust travel and leverage to suit your preference. Smart engineering.
The new spent primer drop features a large-diameter hollow ram with clear hose that drops primers straight to a bin — that’s simple and effective. The press is very rigid and the base is wide enough for good stability. We have one of these Classic Cast Breech Lock Presses in our reloading room and it works well.
A while back, RifleShooter online magazine published a list of the purported Ten Best Bolt-Action Rifles of All Time. Ten classic rifle designs (including the Remington 700 and Winchester Model 70) were featured with a paragraph or two explaining their notable features.
“Best” Lists Stir Controversy…
These Top 10 lists are always controversial. While most readers might approve of half the entries, there are always some items on the Top 10 list that some readers would challenge. Here is RifleShooter’s Top 10 list. What do you think? Are there some other bolt-actions that are more deserving?
1. Springfield M1903
2. Mauser 98
3. Winchester Model 70
4. Remington Model 700
5. Weatherby V
6. Sako L61/AV
7. Savage Model 110
8. Ruger M77
9. Tikka T3
10. Mannlicher-Schonauer
The 6BR Improved cases have become very popular in tactical competitions. In fact the Precision Rifle Blog reports that the majority of Top 10 PRS and NRL shooters are now running some version of the 6mmBR Norma case — such as the 6mm Dasher, 6BRX, or 6BR Ackley. In fact “40% of those ranked in the top 10 in either league were running a 6mm Dasher”. This short, fat 6BR improved case can push the 100-107gr bullets to 2950+ fps, a well-known accuracy node. Yes the 6mm Creedmoor and 6XC can push heavy 6mm projectiles faster to be sure, but there is a trade-off in barrel life. The 6BR Improved cases represent a “sweet spot” for the tactical game, offering outstanding accuracy, with less recoil than bigger cartridges, including the 6.5 Creedmoor.
The only real downside to the short/fat 6BR-based cartridges is that they can be finicky when feeding from a magazine, at least without some modifications to the follower and feed lips. There are kits that can help with this, but now there is an even better solution — a premium custom action designed specifically to feed the 6mm Dasher (and similar cartridges) from a magazine. This action, the Borden Super Short 6, was recently, unveiled on Facebook by PRS competitor John Hargett. This action, available in both right- and left-hand versions, features a dedicated new Super Short 6 (SS6) magazine optimized for Dasher-sized cartridges. The bolt has a shorter throw than a standard Rem short action. We think this new action could become VERY popular with tactical shooters, and varmint hunters.
John Hargett says: “Installing spacer kits or possibly having a nose dive in full-size .308 mag is in the past! This will fit all 700 stocks and chassis and AICS bottom metal. So no need to change what you are already using. Borden creates a masterful action at an extremely affordable price.”
Key Facts about the Borden Super Short 6 Action and SS6 Magazine:
1. Rem 700 Footprint — The Borden Super Short 6 action is internally tailored to the 6mmBR cartridge and its wildcats, but externally maintains Rem 700 action dimensions. This means the action IS compatible with the stock and chassis you currently own. And, the Borden Super Short 6 comes in both right-hand and left-hand versions, with PVD coating available (on action and/or bolt).
2. Rem Trigger Compatibility — The Borden Super Short 6 action works with Rem-compatible triggers, and the actions are specifically timed to work with trigger of your choice.
3. Dasher-friendly New Mag Design — The patent-pending Super Short 6 magazine is sized right for the 6mm Dasher and all the 6BR family. The follower and feed lips are configured to allow smooth, reliable feeding with no “magazine nose dives”. Even with the optimal design, the SS 6 magazine will work with all chassis profiles and bottom metal made for AICS-type magazines.
Here is the description from Borden Rifles website:
“The new action from Borden Accuracy (Borden Super Short 6) features a Rem 700 short action-compatible footprint with a shortened magazine well and shortened port set up specifically to reliably feed 6 BR, 6 Dasher, 6 BRA, 22 BR cartridges. The bolt has modified Borden bumps to aid in cycling in the dirty environment. The pictured action shows our standard bolt handle and tear drop knob. Production models will feature a handle that is threaded on the end so individuals can use their preferred knobs. I have been one of the individuals that developed the bolt timing and neutral handoff with the trigger for competition shooting to minimize rifle upset in the bags when closing the bolt. These actions will be available with either the neutral timed handoff or with about .03 to .035 inch cock on close. The cock on close option has much easier bolt lift that seems to be favored by PRS competitors. For now the bolts will have spiral flutes but future versions will have diamond flutes as an option. Development work will be done to also handle the .223 Rem and the PPC family.”
6mm Dasher and 6BR Wildcats Favored by Top PRS/NRL Shooters
1. The vast majority of PRS Shooters surveyed are now shooting a 6mm cartridge of some kind.
2. While the 6mm Creedmoor is still very popular, the 6mm Dasher is now the #1 cartridge among leading PRS and NRL competitors surveyed. (SEE Chart HERE)
3. If you include the 6BRX, 6BRA, and original 6mmBR cartridge along with the 6mm Dasher, this full family of short, fat cartridges is now used by twice as many top PRS/NRL competitors as the 6mm Creedmoor. And the 6.5 Creedmoor has really fallen from favor.
Credit Boyd Allen for Borden Action product find. Credit PRB for data on PRS/NRL cartridge use.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Brownells — Howa 1500 USA Flag Chassis Rifle, $1299.99
With its “battleworn” stars and stripes Cerakote finish, Howa’s USA Flag Chassis Rifle is an eye-catcher. AND this handsome Howa shoots as good as it looks. This .308 Win rifle features a quality 26″ barrel with factory muzzle brake. The Howa 1500 action cycles very smoothly (better than a Remington or Savage), and this rifle comes with Howa’s fine HACT 2-stage trigger. This rifle includes a 4-16x50mm Nikko Sterling scope mounted to an EGW +20 MOA scope rail, Luth AR buttstock, plus a 10-round detachable box magazine. Howa even includes a Buffalo River swivel bipod with 6″-9″ adjustable legs. With this rig, all you need is ammo! Price is $1299.99 with scope and bipod. NOTE: This is also offered in 6.5 Creedmoor, but that is currently out-of-stock. Check with other vendors.
2. Bruno’s — Nightforce Competition 15-55x52mm Sale, $2160.00
You can’t walk up to any respectable match line and not see a bevy of Nightforce scopes. The Nightforce 15-55x52mm Competition scope is still one of the very best scopes for serious F-Class and long-range competitors. Now Bruno’s is selling the 15-55x52mm NF for $2160.00 — that’s nearly $200 cheaper than other vendors. Bruno Shooters Supply has the Nightforce Competition 15-55x52mm optic as well as countless other Nightforce scopes on sale. Get yours now before prices go back up.
3. Midsouth Shooters Supply — End of Year Clearance Sale
End of year means CLEARANCE at Midsouth Shooters Supply, with prices up to SEVENTY PERCENT (70%) off normal pricing. We’ve posted just a few of the nearly 800 items we found in their clearance section and with prices that can’t be beat it’s worth your time to scour the pages. Head to the Midsouth clearance sale to what you can’t live without before you hit the range again. Note, this End-of-Year Clearance sale ends today December 31, 2018. Don’t hesitate if you see a bargain you like.
The Leupold Ventana S-1 15-45x60mm spotting scope offers a good 15-45X range of power along with a 60mm objective. For a competitor using the spotter mostly for watching mirage and shot markers, this may be all you need in a spotter. And this is compact and easy to transport in a range bag. As one Amazon reviewer said, “TERRIFIC scope! 45X is plenty. Most people with 60X scopes rarely use more than 40X power so I decided to go for this smaller, lighter scope. We used it on wolves in Yellowstone this week at distances of 1/2 to 1 mile. This scope is tack sharp. I was able to compare to Swarovski, Vortex, and Nikon and this Leupold seems just as sharp at a fraction of the price. The amount of eye relief is generous, even better than some of the Swarovskis I looked through.”
5. Midsouth — Hornady L-N-L Auto Progressive Press, $378.99
If you need large quantities of pistol or rifle ammo, it makes sense to get a progressive press. This auto-indexing, 5-station press will give you one loaded round for every complete cycle of the loading handle. We’ve used this Hornady Lock-N-Load AP Progressive press and can confirm that it works well. We actually prefer the rotary powder measure to the sliding powder system on Dillon progressives. We find it much easier to change load weights with the Hornady system (which uses inserts), and it is more precise with certain types of powder. This press also uses convenient quick-change die bushings. Right now you can save $113.00 with the $378.99 sale. NOTE: Press purchasers can get 500 free bullets through the Hornady Rebate Program but that ends 12/31/2018!
6. EuroOptic — Leica CRF 2000-B, $399.00
This may be the best deal we’ve seen on the vaunted Leica 2000-B Laser Rangefinder (LRF) with 7-power optic. This unit is rated out to 2000 yards on reflective objects (in real-world use it will laze a deer well past 800 if you can hold steady). The Leica 2000-B features air pressure and temperature sensors, plus on-board inclinometer. Angle correction works out to 1200 horizontal yards equivalent, with the true hold-over displayed in both MILs and MOA. The compact Leica CRF 2000-B weighs just 6.5 ounces and measures 4.5″ L x 2.25″ H x 1.25″ W. It has a waterproof outer shell.
Are you tired of using pan scales and trickling your charges just to spend a day at the range? Now for under $170.00 you can set your charges and watch them automatically drop quickly and efficiently. The Hornady Lock-N-Load auto charge powder dispenser gives you the confidence and speed whether you’re doing load development or just looking to make some rounds for a day at the range. With this $164.99 sale price, this Hornady dispenser over $90 cheaper than an RCBS Chargemaster Lite.
Have you ever been ready to run to the range and blow off a few rounds only to find that you’re out of targets? If you’re like us that’s one of the most frustrating things that can happen when heading to the club and nobody likes using printer paper and a marker to make a target. Pick up this 100 count set of sight-in targets and you won’t have to run to the store last minute or dig through the range trash cans hoping to find a barely-used target. This is a great value — only 18.4 cents per target!
9. Amazon — Caldwell Zeromax Rifle Rest, $28.99
No this basic, inexpensive rest won’t work for benchrest matches. However, it will suffice to sight-in a hunting or varmint rifle. AND it will do double duty as a cradle for rifle cleaning and maintenance. In fact this Caldwell rest is less expensive than some cleaning cradles than can’t be used for shooting at all. Pick up one of these Caldwell Zeromax Rests for only $28.99 and you’ll have a handy back-up rest you can keep in a vehicle or lend to a friend. Plus, some low-cost modifications can improve the rest’s adjustability. One purchaser noted: “The back foot is just a threaded bolt with a rubber end cap, but it does not turn or move. Changing the elevation with the front two bolts, and keeping everything level can be a challenge, so I added elevation adjustments to the back bolt as well. I did this by taking a bolt spacer from Ace Hardware super glued to a nut, and using that to lift or drop the back. Total cost was about $4.”
Credit Forum Member F-Class John for preparing most of this week’s deals.
If you’ve ever used a Harris Swivel Bipod, you know that, without tools, it is difficult to put enough tension on the swivel locking knob to really lock the unit solid. And, if you do manage to get the knob really tight (perhaps by using pliers), it is difficult to loosen with fingers alone.
If you are not yet familiar with the many unique features of the Forster Co-Ax, we recommend you watch the video above, a very thorough video review by Rex Roach. This shows how the press operates and highlights the design elements which set the Co-Ax apart from every other reloading press on the market. This 14-minute video shows the key Co-Ax features, explaining how the floating case-holder jaws work (3:30 time-mark), how the dies are held in place (4:40 time-mark), how spent primers are captured (6:10 time-mark), and how to set the primer seating depth (10:00 time-mark). We’ve used a Co-Ax for years and we still learned a few new things by watching this detailed video. If you are considering purchasing a Co-Ax, definitely watch this video start to finish.
Nearly every serious hand-loader has owned or used the RCBS Rock Chucker press. This Editor still uses a Rock Chucker passed down by his brother 20 years ago. And yes, it is still going strong. The latest Rock Chucker Supreme single-stage press features an improved “upside-down Y-path” dual-bin spent primer catcher. Otherwise the Rock Chucker Supreme remains big, strong, versatile and sturdy. It has very strong linkages, with a compound leverage system providing plenty of power — FL-sizing is a breeze even with large, magnum cases. The 1″-diameter ram has 12.5 sq. inches of ram-bearing surface.
The Lee Classic Cast Breech Lock Press offers excellent value for the money (
