|
|
January 19th, 2015
SHOT Show kicks off tomorrow, January 20th. As a sneak preview, here are some new (or newly marketed) products that will be on display in Las Vegas. We’ve reviewed nearly 500 featured products and here are some cool items that caught our eye. The AMP annealing machine is a break-through technology, and we’d love to have one of those AG Composites Carbon stocks for an M1A. The Bix’N Andy trigger isn’t really new, though most American’s haven’t seen one yet. It really is a gem. Enjoy these product snapshots. We’ll provide more “hands-on” reporting over the coming week.
AMP Induction Annealing Machine
Source: Bullet Proof Samples LLC, AmpAnnealing.com
Annealing Made Perfect (“AMP”) is a pre-programmed, fully-calibrated induction annealer. Extensive metallurgy testing has laboratory verified the temperature/time program settings, allowing precise and repeatable neck hardness every time. The AMP can handle cases from .17 to .338 caliber. Change from one cartridge size to another in seconds. The sophisticated calibration eliminates guesswork, so you don’t have to just “burn-off” lacquers and a stop-watch. Just select the correct program, set the pilot, and start annealing. Proper annealing provides more consistent neck tension and that translates to lower ES/SD and better accuracy, particularly at long range.
X-15 Side Charged Upper (SCU)
Source: X Products
The standard AR rear-pull charging handle is annoying, particularly when shooting prone. The folks as X-Products have a smart solution, an upper with a side-charging handle. We’ve seen side-charge uppers before, but these were custom mods. The $299.00 X-15 Side Charged Upper is a turnkey solution that works with a standard AR-15 bolt and carrier. No machining or modification is needed. The elevated charging position allows the bolt carrier to be operated with a proprietary cam pin that is included with the upper. The manufacture claims its X-15 upper offers “Increased performance with a gas slide that covers the charging port preventing gas and debris from hitting the operator when suppressed”.
Bargain-Priced Composite Stock with Bedding Block
Source: Stocky’s Stocks
This $199.00 stock combines the latest glass-filled nylon composite technology with Stocky’s proven AccuBlock aluminum bedding technology for Remington 700 barreled actions. These stocks are offered in varmint, target, tactical, and hunting rifle models. All variants offer a “drop-in” solution for Rem 700 actions. The $199.00 price is makes this a bargain solution for hunters and varminters who want to upgrade from a flexy “tupperware” stock.
Bix’N Andy Match-Grade Triggers
Source: BulletCentral.com
Bix’n Andy is an Austrian company that crafts some of the best triggers on the planet. Gunsmith Andy Atzl uses a unique ball bearing mechanism that allows for incredibly precise trigger pull weight adjustments. BulletCentral’s owners says: “Andy’s work is consistently top quality and we are lucky to be the exclusive North American importer and distributor for his products.”
Peterson Cartridge Brass
Source: Peterson Cartridge Co.
We welcome any company that’s jumping into the brass marketplace. Competition among brass-makers is always a good thing. For 2015, Pennsylvania-based Peterson Cartridge Co. will offer “match-grade” rifle brass for four (4) cartridge types: .308 Winchester, 7mm Remington Magnum, 300 Winchester Magnum, and 338 Lapua Magnum. On Peterson’s website, you’ll find a page that illustrates each stage in the brass-making process, from cupping to final trim and annealing. If you’ve ever been curious about how brass is made, check out Peterson’s Cartridge Manufacturing Process Page.
AG Composites Carbon Fiber Components
Source: AG Composites LLC
AG Composites specializes in the design, development and production of high performance composite components. AG makes carbon fiber rifle stocks, handguards and buttstocks, and AG can also provide carbon fiber OEM components for manufacturers. Check this handsome AG carbon fiber stock on an M1A. That brings an old Battle Rifle design into the 21st Century.
Bulletproof Safari Vest
Source: Miguel Caballero
This “discrete” bulletproof Safari Vest was originally created for celebrities, VIP clients, and business executives. However, this product could also benefit those involved in firearms training or range operations. (It only takes one Accidental Discharge by a newbie to spoil your whole day.) This vest features light, flexible, yet strong ballistic materials that meet NIJ 0101.06 standards. The Safari Vest features a front overlap that functions as an anti-trauma plate protecting the thorax. For increased comfort, the vest is engineered to distribute the weight evenly front to back.
Smith & Wesson Ported M&P Pistols
Source: Smith & Wesson
New from the Smith & Wesson Performance Center are four new Ported M&P pistols. What makes these pistols unique is the fact that they have ported barrels for reduced muzzle flip, as well as an adjustable trigger stop. Stop by S&W SHOT Show Booth #13729 to have closer look at all the features.
Swab-Its 17-Caliber and 22-Caliber Bore-Whips
Source: Super Brush
The Swab-its folks have just made it even easier to clean .177 air rifles, .17 caliber rimfire or centerfire rifles, and .22 caliber lever action and semi-auto rifles. Bore-Whips feature a 45″ polypropylene cord tipped with a durable, reusable swab. This handy, pull-through design allows for cleaning the proper way, from breech to muzzle. The bright-colored Neon Orange (.17 cal) and Neon Green (.22 Cal) plastic cords do double-duty, acting as Empty Chamber Indicators (ECI) at the range. Swab-its Bore-whips are available in 3-packs for both .17 and .22 calibers. Check out samples at SHOT Show Booth #1241.
Thanks to Forum member M500 for Product Tips.
January 2nd, 2015
Nightforce is introducing two all-new First Focal Plane (F1™) scopes at SHOT Show 2015 in Las Vegas. With abundant elevation adjustment, these new F1 optics should be popular with long-range shooters. Nightforce will offer these F1 scopes with either MOA-based 1/4-minute clicks or a Mil-based 0.1 (one-tenth) Mil-Radian adjustments. Reticle choices are: MOAR™, Mil-R™, Horus H59, and TReMoR3.
Our readers will probably be most interested in the new ATACR™ 5-25x56mm F1™ riflescope. Nightforce tells us that “We have been bombarded with requests for this specific model. We wanted to design and pack this model with so many features that it would be the true heavyweight champion in the field.” With a beefy 34mm maintube, the new 5-25x56mm F1 boasts an impressive 30 MOA (or 12 Mil-Rads) of elevation per revolution, with 120 MOA (or 35 mils) of total elevation adjustment. That’s a lot. Tactical shooters should appreciate the yards/meters markings on the side parallax knob (yards for MOA scopes, meters for Milrad scopes). You can actually “dial the distance” with the marked parallax knob. That should speed up focus adjustments during target transitions. For low-light applications, the new 5-25x56mm F1’s DigIllum™ reticle illumination system provides precise brightness control.
Nightforce believes the 5-25x56mm F1 will be a hit with long-range and tactical marksmen, even though MSRP is a hefty $2900.00: “We anticipate that some of the weapon applications for this model will include long-range and ultra-long-range precision tactical rifles, unique long-range hunting rifles, and many of the purpose-built magnum AR platforms.”
New 4-16x42mm F1 Replaces current 3.5-15x50mm NXS F1
The ATACR™ 4-16x42mm F1 will replace the previous NXS 3.5-15x50mm Nightforce. Like the 5-25X F1, the new 4-16X F1 offers 30 MOA (or 12 Mil-Rads) per revolution of the elevation turret. This scope also features a new ZeroHold™ zero-stop which uses a simple press-button design. According to Nightforce, the low-profile ZeroHold offers a positive zero-stop that is “automatically re-indexed as you return to your zero”. As with the ATACR 5-25x56mm F1 model above, the ATACR 4-16x42mm F1 features DigIllum reticle illumination control. MSRP for the 4-16x42mm ATACR F1 is $2400.00.
December 29th, 2014
Peltor folding ‘Shotgunner’ ear muffs are on sale right now at Amazon.com. Available in red (#97013), dark green (#97012), or black (#97011), the muffs cost about $15.00 (red version), and you can get free shipping with an order over $35.00. That’s a good deal for a good product. This Editor owns two sets of these muffs. They are very lightweight and comfortable. Because they fit well, with gel foam cushions, they actually seem to work better than some big bulky muffs (with higher NRRs) that don’t seal so well. If used with plugs underneath, these are highly effective and very handy.
Peltor’s Shotgunner muffs feature tapered ear domes, cutaway on the lower half for stock clearance. We have not found any other muffs on the market that allow a better cheek weld, with less interference with the comb on a riflestock. These muffs also fold up into a very compact package. You can keep one set in your range kit and a spare set in your vehicle for back-up or if a friend needs hearing protection.
December 22nd, 2014
Story based on Report by Lars Dalseide for NRABlog.com
NRAstore merchandise buyer Brian Evans has a list of his best-selling products, based on online sales. In ascending order, the Top 5 best-selling products for this 2014 holiday season are:
5) Critical Food Supply – The Critical Food Supply ($134.95) provides 56 nutritious meal servings in an easy-to-transport bin. Perfect for emergencies, varieties include chili macaroni and tortilla soup.
4) Concealed Carry Hooded Sweatshirt – Developed exclusively for the NRAstore, this CCW Hooded Sweatshirt has a discrete compartment for carry pistols. This $59.95 hoody is the only product of its kind, according to the NRAStore.
3) Concealed Carry Denim Jacket – Made in the USA, this $84.95 denim jacket is specially engineered with CCW features for NRA members.
2) Concealed Carry Handbag – This $149.95 leather handbag features a discreet, lockable side compartment that securely holsters a self-defense handgun. (Available colors: red, cognac, and black.)
And the #1-Selling item is the NRA Handgunner Backpack
The Handgunner Backpack ($119.95) features a slide-out, four gun cradle, with pockets for ammo and other range gear. Measuring 17″ wide, 22″ high and 9″ deep, the pack has plenty of room for gear.
 Quad-Pistol Gear Hauler
The cleverly-designed Handgunner Backpack carries up to four pistols. Undo the zipper, slide out the compartment, place your pistols in one of the four foam gun cradles. Store your magazines in a zip-up side pocket with six (6) individual mag sleeves. There are also specially designed compartments for ammo boxes, muffs, protective eyewear, target stapler, and more. You’ll find handy embroidered patches showing the right spot for each gear item.
Lars Dalseide, editor of the NRAblog, tells us this pack is comfortable and sturdy. The shoulder straps and the rear back panel feature moisture-wicking padding and the pack comes with a waterproof cover. And the pack won’t collapse when you set it on a bench — it stands up on its own.
December 16th, 2014
 Ernie Paull from California was an active competition shooter for many years. However, his eyesight has declined so he has turned his attention to providing components for shooters and gunsmiths. Through his Ernie the Gunsmith website, Paull sells a variety of useful products including gun trigger springs, pillar-bedding kits, Accu-Risers, and pillar installation tools. This Bulletin post focuses on Ernie’s trigger springs. Ernie offers springs for a wide variety of rifles: Browning (A-Bolt, A-Bolt 22), CZ (m452), Kimber, Remington (XR100, XCR, 7, 700, 722, 788, 7600 and more), Ruger (77, 77-22, LC6), Tikka (T-3), Weatherby (MK-V), and Winchester (M-70).
Springs start at just $6.95. Ernie also sells springs for the Rem-compatible Shilen Benchrest trigger, as well as Rem 700 ejector springs and trigger alignment springs. For Rem 700 rifles, Paull makes a spring that fits all Remington M-7 and M-700 triggers including the 2007-vintage X Mark-PRO trigger (but not the newer X Mark-PRO trigger introduced in 2009). Ernie says: “on average, installation of his Model-700 spring will reduce factory triggers’ weight of pull by 1½ to 2½ lbs with no other changes. The exact amount of creep, over-travel, and weight of pull are dependent upon the type and amount of tuning accomplished by your gunsmith.”
 We often hear requests from Tikka T-3 owners asking how they can reduce their trigger pull weight. Paull offers a Tikka T-3 varmint trigger spring which can reduce the pull weight significantly. The photo at left shows the Tikka T-3 trigger assembly.
While there is more to a good trigger job (in most cases) than just a spring swap, you need to have the proper rate spring when adjusting trigger pull weight downwards. NOTE: For safety reasons, we recommend you consult a competent gunsmith before modifying factory triggers. We stress the word competent…
Ernie has observed that some gunsmiths try to lighten trigger pulls by modifying factory springs in questionable ways: “I have worked with gunsmiths in the past who, when the subject turned to trigger springs, preferred to clip them, grind them, heat them, bend them, smash them, or simply back out the weight of pull screw until there was no or almost no pressure on the spring. With any of these methods, you get a spring whose rate is rapidly rising as the trigger is pulled. As the trigger is released, the spring rate rapidly decreases as it approaches full or near-full extension. A more uniform weight of pull will be achieved when the trigger spring is compressed within its normal working range throughout the entire movement of the trigger. In the long run, the benefits of saved time, plus more uniform and reliable results, will more than offset the cost of these [replacement] springs. If you want a lighter trigger pull, you need a lighter trigger spring.”
December 15th, 2014
The U.S. Patent Office has awarded BoreSmith utility patents for two unique gun cleaning products. Patents were issued for BoreSmith’s triangular Pyramid Patch™ as well as BoreSmith’s dual-diameter JagBrush™. Both products were designed by Shane Smith, a mathematician/physicist who used his scientific and firearms knowledge to create innovative bore-cleaning products that may well work better than conventional patches and brushes.
BoreSmith’s clever Triangle Patch™ (aka Pyramid Patch) presents more cleaning surface area to the bore wall than does a conventional square or round patch (of equivalent size). At the same time, the unique geometry makes Triangle Patches much less likely to jam in the barrel. This is because the notches in the sides of the triangle allow the patch to sit more uniformly on the jag (without bunching up). The Triangle patch can be used with a standard jag but works best when paired with BoreSmith’s patented dual-diameter JagBrush. Order Triangle Patches HERE.
Triangle Patch Function and Geometry Explained (See 1:18 time-mark):
NOTE: Despite what you may see in this video, you should insert brushes and patches from the chamber end first, using a well-fitting cleaning rod bore guide. With bolt-action rifles, NEVER insert a cleaning rod (with brush or jag) in through the muzzle. This may damage the delicate crown of your barrel.
Patent Awarded to Dual-Diameter JagBrush
The JagBrush is like a standard bore brush but has two different diameters on the bristle section. Bristles in the front are smaller, while the rear bristles are similar length to a standard bore brush. When a patch is pushed through the bore using a JagBrush, the smaller bristles will grab the patch, leaving the longer bristles exposed and creating a dual-action wiping + brushing system. JagBrushes are offered in a wide variety of calibers, in both bronze and nylon versions.
Shane Smith, CEO of BoreSmith, was pleased that his designs have been awarded two important patents: “I created these tools to allow the user to get their firearms cleaner, faster, and without causing unnecessary damage in the process. At BoreSmith, we strive to develop and produce superior cleaning tools that help firearm owners protect their investments.” For more info, visit BoreSmith at RigelProducts.com.
December 15th, 2014
 We’re well into December, and that means many readers will be putting guns in storage for a few months. It also means the weather is cold and damp — conditions that encourage corrosion. To ensure your rifles remain rust-free over the winter, we recommend some preventative measures. First clean the bore thoroughly, and remove carbon and gunk from the action areas. Slide a couple oiled patches down the bore and make sure that any bare metal parts (including sights, trigger guard, action, and bolt) are coated with some protective oil. We recommend Eezox, Boeshield T9, or CorrosionX. Eezox leaves a glossy dry film shield with excellent rust resistance. CorrosionX is more like a conventional oil, but with special anti-rust additives. Boeshield T9 leaves a slightly thicker, wax-like coating that blocks all kinds of oxidation, even on aluminum parts.
 Laminated Long-Term Storage Bags
Before you put your guns away for the winter, you may want to pack them in long-term storage bags. You can get superior protection with ZCORR long-term storage bags. Used by the USMC for arsenal storage, ZCORR bags are like the ultimate zip-lock baggie. They keep air and moisture out, and the interior is impregnated with corrosion inhibitors that block rust. The basic long-gun bags cost $12-$16, and have a velcro closure. The “Collectors Series” storage bags ($22-$30 for long-guns) feature a foil-adhesive closure that is 100% air and water tight. The deluxe preservation-grade ZCORRs, priced at $32-$39, can be vacuum-sealed for maximum protection — just hook up a vacuum cleaner to the special one-way valve. See photo below of rifle in ZCORR Vacuum storage bag.
Our friend Jim Sheppard of the Shooting Wire, has used ZCORR bags for years. He writes: “I’ve used ZCORR bags in the past, but the latest firearms versions are reusable, equally durable (they’re far tougher than a plastic bag) and available in sizes that will protect pistols, carbines and long rifles. Their Collector Series storage bags and Ammunition and Parts Pouches use zip closures to protect a variety of sizes of parts, ammo or whatever.”
 How ZCORR Bags Work
The laminated material used in ZCORR bags is puncture-resistant, tear-resistant, and will not harm any non-metal surfaces. Two key elements in bag’s laminate construction allow ZCORRs to block corrosion: 1) the foil barrier layer; and; 2) the VpCI-impreg-nated sealant layer.
The foil layer in ZCORR FSP Bags™ performs two tasks simultaneously; it keeps harmful corrosion causing elements out of the bag and keeps the corrosion inhibiting VpCI chemistry in the bag
The VpCI-impregnated inner layer provides the anti-corrosive properties. The VpCI chemistry impregnated in the interior layer migrates out of the plastic and forms an invisible gas inside of the bag. This gas is made up of VpCI molecules that are attracted to the interior and exterior metal surfaces of your firearm. The gas coats these metal surfaces with a one-molecule-thick layer of VpCI chemistry that stops corrosion before it can begin. This one-molecule-thick layer of VpCI chemistry dissipates off of the firearm when it is removed from the bag.
November 26th, 2014
|
One of our Forum members asked us the question: “Does anybody make a good range box with cradles for cleaning at the bench?” The answer is yes — the MTM model RBMC Range Box offers slide-in plastic cradles that provide a reasonably sturdy platform for a quick clean when you’re done shooting. The RBMC box also offers plenty of storage for jags, brushes, solvents, ammo boxes and other miscellaneous gear you need for the range.
Among the many range boxes available, the MTM model RBMC Range Box leads the pack in terms of versatility. It is rugged, it has plenty of storage space, plus it doubles as a handy cleaning station. This Editor has used the MTM Range Box to clean rifles and as a “range expedient” rifle holder when adjusting scopes and tensioning action screws. It’s a good product that does the job and stands up to rough handling. |
|
Fitted Cleaning Cradles
The key feature setting MTM’s RBMC apart from most range boxes is the rubber-coated cradle system. Wide enough to fit a 3″-wide fore-arm, the cradles slide into vertical slots on either end of the box. This allows your range box to serve as a stable maintenance station. The RBMC is really pretty stable in this role, and the cradles won’t mark your stock. The cradles even feature slots on each side to hold your cleaning rods when not in use. The MTM Range Box is secure enough to stay in place when you’re brushing the barrel. However, if you’re working on a carpeted bench top, you may want to keep one hand on the box when running a cleaning rod through the bore, just to ensure the box doesn’t slide.
Versatile Upper Tray with Dividers
The MTM Range Box has two major components — the box base (with cradles), and a large upper tray with hinged top and carry handle. This large upper tray clamps securely to the bottom unit for transport. The top tray has a long section that holds cleaning rod guides, long brushes, grease syringes and the like. There are two, clear-plastic fitted divider trays. These will hold your patches and jags, plus comparators, ring wrenches, and other small tools.
 What Might Be Improved
Though we really like the MTM Range Box, it’s not perfect. First, we wish the box was a bit deeper, to have added carrying capacity. The dimensions of the MTM Range Box are: 25″ long x 11.5″ wide x 8.75″ high. We’d like to see it 12″ high/deep to allow larger solvent bottles to stand upright and to provide more space to carry tools and shooting muffs. However, it is deep enough to hold the large 100-round MTM cartridge boxes that are popular with many shooters (see photo at left).
The cradles are very nicely designed, and will hold your rifle securely without marking the stock. However, we’ve found that sometimes the rear cradle grips the gun so well that the cradle slides out as you lift the gun up. This is not a big deal, but it does demand a little extra attention when you’ve finished cleaning. We really like the twin clear plastic dividers that fit into the large removable top-tray, but we wish the dividers had individual hinged tops. This would keep patches and small parts more secure.
|
The MTM Range Box costs about $46.00 at most vendors. The MTM Shooting Range Box RBMC-11 (green version) is on sale now for $35.68 at Amazon.com, with FREE shipping. The red RBMC-30 version (shown below) costs slightly more, and may currently be hard to find.
|
|
November 9th, 2014
 Do-It-Yourself Joystick Rest — Jeff’s Labor of Love
Quite a few competitors chamber their own barrels, and a few construct their own stocks. But Jeff Godfrey takes the prize for do-it-yourself audacity — he built his own co-axial front rest from scratch. Sam Hall provides this report:
“Jeff, one of Piedmont Gun Club’s regulars, is a talented fabricator. He made one of the smoothest joystick rests that I have ever laid my hands on. Jeff’s home-built coaxial rest rivals the Farley and Seb Max. It will also handle a wide fore-end Heavy Gun. Constructing virtually every part of this rest from scratch, Jeff made his own co-axial to save money. You have to admire his ingenuity and his dedication. Jeff says it took him over 100 hours to make. He said there would be no way he could make another one for profit!”
October 22nd, 2014
 Our take on Bore-Store Gun sleeves is simple: They work great, so buy them and use them — for ALL your valuable firearms.
These thick, synthetic-fleece sacks cushion your guns, preventing nicks and scratches. The breathable fabric wicks away moisture, and the fibers are coating with corrosion inhibitors. I personally use Bore-Stores for in-safe storage with all my guns, and I have never had one of my guns rust inside a Bore-Store, even when I lived a stone’s throw from the ocean.
Bore-Stores are offered in a wide range of sizes, so you can find something to fit everything from a Snub-nosed revolver to a 32″-barrelled 50 BMG. Rifle-size Bore Stores can be purchased for $12.00 – $21.00 from Brownells. For long F-Class or tactical rifles, we recommend the 10″x52″ Scoped Shotgun Bag, Brownells item 132-000-003. You can also order direct from the Bore-Store manufacturer, Big Spring Enterprises, www.BoreStores.com. Big Spring will also craft custom sizes on request.
Consider Military-Style, Triple-Layer Bags for Long-Term Storage
While we prefer Bore-Stores for regularly-used guns, if you have heirloom firearms that will be kept in storage for very long periods without seeing any use, you may want to grease them up and place them in the thin, but rugged three-layer storage bags sold by Brownells. The bags are made from a three-layer laminate of polyester, aluminum, and polyethylene film, with a shiny silver exterior. Though the laminate is thin, the Brownells storage bags are puncture-resistant, and have a 0% moisture transmission rating so moisture can’t get inside. These bags are also resistant to petroleum-based chemicals and they won’t break down even in contact with soil or moisture.
 Here’s one VITAL bit of advice for using these bags. Be absolutely sure, before you seal up the bags, that your guns are DRY and that all metal surfaces have been coated with an effective anti-corrosive, such as BoeShield T9 or Eezox. Brownells’ storage bags are inexpensive. A three-pak of 12″x 60″ rifle sacks (item 083-055-003WB) costs just $22.99 — under eight bucks a gun. That’s cheap insurance for rifles and shotguns that may cost thousands of dollars.
Get Your Guns Out of Foam-lined Cases — They Are Rust Magnets
Just about the worst thing you can do in the winter (short of leaving your rifle outside in the rain) is to store firearms in tight, foam-padded cases. The foam in these cases actually collects and retains moisture from the air, acting as the perfect breeding ground for rust.
 Remember, those plastic-shelled cases with foam interiors are for transport, not for long-term storage. Don’t repeat the mistake of a wealthy gun collector I know. He stored four valuable Colt Single Action Army (SAA) revolvers in individual foam-padded cases, and locked these away in his gun safe. A year later, every one of his precious SAAs had rusted, some badly.
|
