|
|
October 13th, 2008
Forum Member Jeff R. (“aJR”) from Australia has crafted a slick, handsome cartridge holder to use with his heavy Benchrest Gun. This is a simple, elegant design that would be relatively easy to build in a home workshop. Composed of two blocks of wood with parallel metal arms, the unit adjusts for height and block angle. Jeff tells us: “This is my new cartridge dispenser I knocked up in the shed. I wanted to get the record rounds up next to the action and this is adjustable for just about any gun/port configuration, right or left.” The cartridge caddy has ten round holes (for record shots) in the top wood block, stacked in two rows. The base piece has five holes for sighters, with the holes cut at an angle for easy access.
For the blocks, Jeff used “Jarrah” wood, a deep, red hardwood native to West Australia. Jeff says he did not stain the wood–what you see is the natural color, just sprayed with acrylic lacquer. A similar wood available in the USA is Satiné, also known as “Bloodwood”.
By the way, Jeff’s 1000-yard rifle is worth mentioning in its own right. The gun shoots a large 30-cal magnum wildcat cartridge and has set many Australian BR records. The rifle features a tensioned barrel system, custom Magnum drop-port action, and a metal/composite stock. Click HERE for more info. There’s even a YouTube Video showing Jeff shooting his big boomer.
October 11th, 2008
Now through October 31st, the MidwayUSA Competition Range Bag is on sale for $39.99, marked down from $59.99. This is a BIG bag, almost the size of an airline carry-on. Padded full-length pouches line each side and offer plenty of room for handguns. A drawstring bag for spent brass is also included. The main bag has multiple accessory pockets, two padded pistol rugs, and a water bottle pouch with drain grommet. The MidwayUSA Competition Range Bag is actually two bags in one. Inside the main compartment is a removable open-top bag with wrap-around web handles. It contains 6 magazine pouches and 2 hook and loop internal dividers.
Here are reports from actual owners, as posted on GlockTalk.com, which has no affiliation with MidwayUSA:
“Yes, the bag is huge. I’ve been using the bag for the last two years and really like it. I carry lots of stuff to the range, including several handguns.”
“Own it, Love it! It is a great deal if you ask me. I have plenty of room for weapons, targets, ammo, eye and ear protection and it even has a drink holder. It also comes with a brass bag!”
“The MidwayUSA range bag is money well spent! I bought one when they were 50% off, and it’s an awesome bag. Plenty of room for pistols and ammo, front and side pockets, drink holder, brass bag, shotgun shell bag, and two pistol sleeves. It’s great!”
“I got it and I love it. It’s well made and you can’t beat the price. Best 40 dollars I ever spent. And if they would sell it for 60 or 70 dollars, it would still be a bargain.”
Over 160 other user reviews are available on MidwayUSA’s website — just click the “Review” tab on the Product Page. The most recent review was posted yesterday by Brian in Kent, WA: “I cannot say enough good things about this bag. I looked at a few range bags that were double or even triple the price of the Midway USA Competition Range Bag, and none of them stacked up. Everything about this bag is high quality — the stitching, zippers, shoulder strap, fabric — and every time I open this bag I find another pocket or pouch. You will not find another bag of this quality with these features for under $60. Trust me I have looked.”
October 1st, 2008
Natchez Shooters Supplies has the Leatherman Skeletool CX on sale for $53.49, marked down from $96.00. Light-weight (just 5 oz.), compact (4″ closed), and versatile, the Skeletool CX features pliers, wirecutter, screwdriver (with changeable bits), and a very nice semi-serrated cutting blade. The handle is tungsten-coated steel and carbon fiber. We’ve checked around the web, and the next lowest price for the versatile Skeletool CX is $62.99 at Toolup.com. If you do order from Natchez, please mention that you saw this deal on AccurateShooter.com.
Buyer Reviews of the Skeletool CX have been extremely positive. One owner declared: “I’ve owned practically every Leatherman and SOG multi-tool produced over the past 15 years; a few Gerbers and Swiss Army brands thrown in there as well. And I’ve got to just jump in and say, this is arguably the best Leatherman ever.” Another Skeletool user wrote: “I’ve owned this product for about 4 months now and really do love it. I appreciate that this Leatherman has done away with all the extraneous tools that add bulk and weight but are rarely used. Instead of needing a holster, I can wear it in my pocket like I would any other knife.”
Better Than a Blade Alone
 For years, this Editor’s favorite, carry-around cutting instrument has been a semi-serrated Spyderco Delica. I may finally retire the Delica and replace it with the Skeletool CX. For not much more money than a Delica costs today, the Skeletool provides a semi-serrated stainless cutting blade, plus pliers and a bit-driver. The overall package isn’t much larger than my Delica, and it’s just as easy to carry. The Skeletool CX has a removeable pocket clip PLUS a handy, carabiner type carry loop (see photo at right).
Specs:
• Length: 4 in. / 10 cm closed
• Weight: 5 ounces / 142 grams
• Features: Combination Straight/Serrated Cutting Blade (154CM stainless steel), Pliers, Wire Cutters, Screwdriver with bits, Bit Storage in handle, Bottle Opener, Lanyard Ring, Carabiner snap-loop, Removable Pocket Clip
• Materials: Stainless Steel, Tungsten DLC Coating, 154CM, Carbon Fiber (handle)
Included Bits:
• Phillips #1 and #2
• Screwdriver 3/16″ and 1/4″
September 30th, 2008
Sinclair International has just introduced a new Neck-Turning Tool. Part of a complete system with carbide mandrels, this product promises to be one of the best neck-turners on the market. The new tool has many improved features we really like:
▪ The cutter body is big, and curved to fit the hand. So, it is easier to hold than the old Sinclair tool or the K&M tool.
▪ The cutter-depth adjustment works really well. A large, knurled rotary knob on the back of the cutter body connects to an eccentric mechanism. This moves the mandrel shaft (and case) in and out relative to the cutter tip. You start by setting the cutter with feeler gauges, then fine-tune with the knob. Adjustments are very positive and precise, with laser-engraved index marks. This is a very good adjustment system, we think.
▪ The end of the tool is open so you can easily eyeball the caseneck as you’re cutting.
▪ High-grade carbide mandrels in 17 through 338 calibers will be offered with the new cutter system. At about $45 per caliber, they’re expensive, but the carbide mandrels DO work better — you’ll notice smoother case rotation and less heat build-up than with conventional (non-carbide) mandrels. If you already have mandrels, don’t worry. Sinclair says: “Our single-ended stainless mandrels will work fine with the new Neck-Turning Tool.”
Precise Adjustments Possible
With the eccentric adjustment system, you can make quick cut-depth changes with great precision. The cutter adjustment knob is click-adjustable in .0002″-.00025″ per click increments. The cut depth can be adjusted through a range of .004″-.005″ using the adjustment dial. A mandrel adjustment screw is included to make mandrel set-up and adjustment easier.
Sinclair’s new Premium Neck-Turning Tool includes three (3) feeler gauges for quickly setting cutter depth in the approximate range of the cut desired. With the cutter in range using the feeler gauge, the eccentric adjustment knob can make final adjustment for the exact neckwall thickness you desire. Sinclair claims: “Cutter adjustment is very fast and sure with none of the usual trial and error experienced with other tools.”
The $145.95 Premium Neck Turning Tool Kit (item NT-4000) includes three feeler gauges and a case-holder Turning Handle. Or you can save ten bucks and get the Tool and gauges without handle for $135.95 (item NT-4100). All popular Sinclair neck-turning tool accessories, including expander mandrels, will work with the Premium Tool. Order caliber-specific carbide turning mandrels separately for $44.75 per mandrel (items 95-0XX).
September 20th, 2008
Bad things can happen if your barrel gets too hot. First, with some barrels, the point of impact (POI) will shift or “walk” as the barrel heats up excessively. Second, even if the POI doesn’t change, the groups can open up dramatically when the barrel gets too hot. Third, if the barrel is very hot, the chamber will transfer heat to your loaded cartridge, which can lead to pressure issues. Finally, hot barrels wear out faster. This is a very real concern, particularly for varmint shooters who may shoot hundreds of rounds in a day. For this reason, many varminters switch among various guns, never letting a particular barrel get too hot.
How do you monitor your barrel temperature other than guessing by “feel”? Neconos.com offers Bar-L Benchrest strips that visually display heat readings from 86 to 140 degrees. Think of these strips as compact, unbreakable thermometers. With adhesive backing, they can also be used to monitor barrel heating. Put a strip on the side of the barrel and the barrel’s temp will be indicated by a stripe that changes from black to green. There is also a “general purpose” strip that reads to 196 degrees (bottom row). The Benchrest strip (86F to 140F) is in the middle. Bar-L temp strips cost $9.00, or $25.00 for a 3-pack.
Value-Priced Temp Strip 10-packs
If you have many rifles, McMaster.com (a large industrial supply house) offers the same reversible, 7 temperature, 86F to 140F strip (item 59535K13) for $11.86 per pack of ten (10) strips. That’s an excellent value. Thanks to reader Josh B. for this tip!
Controlling Ammo Temperature is Important Too
Keeping your loaded cases at a controlled temperature is vital for maintaining good ES and case life. At a late summer varmint match we observed pressure signs with cases that had been sitting in direct sunlight for about 15 minutes. As we were running a “moderate” RL15 load, the pressure indications were surprising. Testing over a chronograph, cases that had been sitting in direct sunlight showed velocities up to 70 fps higher than those that had been kept in the shade. Using QuickLoad’s temperature function, we calculated from the rise in velocities that case pressures had increased by over 4,000 psi–just from 15-20 minutes in direct sunlight!
September 19th, 2008
Which chronograph do you prefer? That’s the subject of a current thread in our Shooters’ Forum. Forum member Dennis (aka “Flatlander”) had praise for his CED Millenium unit. Dennis explained: “I bought an Oehler M33 back in 1985 and worked around its shortcomings for 20yrs. before buying a CED Millenium. Initially, I set both chronos up and fired some standard velocity 22 LR rimfire ammo over both sets of skyscreens to compare velocities. They were within less than 10fps of each other, and that’s the last time I’ve set the M33 up and used it.
CED Chronograph with Carry Case (sold separately)
While I feel I got good data out of the M33 (most of the time), its skyscreens were pretty sensitive to the lighting, and I got tired of having to check all six D cells before leaving for the range. If even one of the six had dropped below about 1.495 volts, I’d often get really weird readings (like 4200 fps with a 85BTHP out of a 243 Win), and/or a lot of missed shots – that’s kind of a PITA when you’ve loaded only five rounds of a new load you’re testing. The small LED display is also hard to read in direct sunlight.
The CED seldom misses a shot — when the light gets low enough to give problems, I’ve been able to remove the diffusers and get another 20 minutes or so of shooting. The original 9 volt battery is still working just fine after three years of regular use, and I can read the large LCD display without my bifocals.”
I’d like to have one of the newer M2 CEDs, but have gotten used to transcribing data by hand (if nothing else, it gives a rifle barrel a little extra time to cool between strings), and really don’t know what the other improvements CED has made to the M2 would do for me. Meanwhile, I’d like to use the M33 & CED together to get muzzle & downrange data to compute actual BCs of some of the bullets I shoot to compare to the maker’s claims.
[Note: Flatlander uses the First Generation CED Millenium. CED now sells the upgraded “M2″ model. The new M2 has more memory and can clock a wider range of bullet speeds -– from 50 fps all the way to 7000 fps. The upgraded M2 will record velocities at much lower light levels than the previous Millennium chronograph. The M2 also features improved software, and an USB interface. That offers simple “plug and play” compatibility with laptops and home PCs.]
CLICK HERE for more information on CED’s latest M2 Chronograph.
The CED M2 Chronograph is distributed by Competitive Edge Dynamics, (610) 366-9752. It is also sold by major vendors including Brownells, Dillon Precision, and MidwayUSA.
September 11th, 2008
 Every long-range precision shooter can benefit from an accurate, full-featured portable wind and weather monitor. Right now the relatively new Kestrel 4500 is the best hand-held weather station on the market. Introduced at the 2007 SHOT Show, The Kestrel 4500 Pocket Weather Tracker is a complete weather instrument, offering instant and accurate measurement of wind speed, wind direction (including crosswind and headwind/tailwind), temperature, humidity, density altitude, barometric pressure and numerous other derived functions. The Kestrel 4500 has a built-in digital compass, a feature not found on other Kestrels. This allows you to track and log wind direction as well as wind speed. Wind direction is displayed in degrees and cardinal compass points.
 Weekend shooters and military snipers alike have been calling for a Kestrel Meter with crosswind calculation for years — and the Kestrel 4500 now offers that capability. By means of its built-in digital compass, the Kestrel 4500 provides Wind Direction and velocity, Crosswind direction and velocity, and Headwind/Trailwind direction and velocity. In addition to these wind functions, the Kestrel 4500 will also display: Max Wind Gust, Average Wind Speed, Temperature, Wind Chill, Relative Humidity, Heat Stress Index, Dewpoint Temp, Wet Bulb Temp, Barometric Pressure, Altitude, and Density Altitude. These features are illustrated in a handy flash-based “Virtual Tour” that shows all the Kestrel 4500’s product features.
CLICK HERE for Kestrel 4500 Virtual Tour with Feature Demos.
The bright yellow Kestrel 4500 is available for $289.00 from Kestrelmeters.com. An olive drab version with Night Vision-friendly backlighting is offered for $309.00 from the same vendor.
Full Review of Kestrel 4500 by SniperWorkx.com
A very detailed field-test of the Kestrel 4500 was conducted by Sal Palma for SniperWorx.com. In his write-up, Sal Palma explains why a precision shooter needs a tool such as the Kestrel 4500: “Altitude, temperature, barometric pressure, and relative humidity are critical pieces of data. As is wind speed and direction. What used to be a good 300-yard zero may now be a full minute or more off. At a range of 300 yards, a one minute error makes a 3″ difference in the point of impact. The [Kestrel 4500] has some major and significant new features not found in any of their other models. To start with, the 4500 offers a built in electronic compass, the compass can be configured to indicate true bearings as well as magnetic. In addition to the basic wind functions the [Kestrel 4500] also provides crosswind, headwind and tailwind data.”
CLICK HERE to download SniperWorkx.com KESTREL 4500 Review in .pdf format.
Kestrel Sponsors U.S. Teams in Spirit of America Match
Nielsen-Kellerman, maker of Kestrel Weather trackers, is sponsoring the U.S. Long Range Rifle Teams in the Spirit of America Match (SOA) running this week at the NRA Whittington Center in Raton, NM. The SOA features one of shooting’s most prestigious international matches, the America Trophy Match. This September, the Match will be held for the first time since 2005. The national teams from Great Britain and Australia will compete against the U.S. National Team shooting at distances from 300 to 1,000 yards. The U.S. Long Range Rifle Teams consist of the National Team (who include former members of the Palma® team), the Veterans’ team, and the USA Young Eagles Under 21 / Under 25 team.
“The effects of wind and weather play a huge role in our sport. Not only does the wind affect the flight of the bullet, but differences in altitude, pressure, and temperature can also change the bullet’s impact,” said Dennis Flaharty, Team Captain of the National / Palma® Team. “Tools like the Kestrel Pocket Weather Tracker can often mean the difference between being a winning team, or being at the weather’s mercy.”
September 9th, 2008
An electronic powder dispenser and digital scale can be very useful tools for load development. However, you’ll need a power supply if your range doesn’t offer AC outlets. Many folks have asked us “How can I use a laptop, chronograph, or electronic powder dispenser that requires 110/120 volt power when I’m at the range?” Sure you can take power from your car’s 12 volt cigarette lighter jack, but you’ll still need a very long cable and a 12 volt to 120 volt step-up transformer. If you run a cable from the parking lot to the bench or shooting bay you’ll have to leave a window open in your vehicle and fellow shooters can trip over the long cord.
A better solution is to get a portable 12 volt/120 volt power station. These are offered by many manufacturers, starting at about $40. Most have a large lead-acid battery inside a plastic enclosure with built-in 12 volt and 110/120 volt outlets. Some units also include air compressors and jumper cables so you can inflate a flat tire or jump-start your vehicle.
Among the available units, we like the Black & Decker VEC026BD Electromate 400 AC/DC Portable Power Station. The B&D Electromate (also sold under the Vector label) offers 400 watts of 120-volt AC power, plus 12.5-volt DC output. There are two three-prong AC outlets and two cigarette-jack style 12v DC outlets on the front of the unit. The Electromate 400 also features an air compressor and permanently attached jumper cables stowed in the rear of the unit. This Black & Decker power unit is currently on sale at Tyler Tool for $99.95. If you don’t need the full 400 watts and air compressor, Black & Decker offers the VEC1026BD Electromate 250 ($61.99 at Amazon.com). This has jumper cables, but no compressor and just one 120 volt outlet and one 12 volt outlet.
Sportsman’s Guide offers a similar product, the Guide Gear™ Power Station. This versatile, 5-in-1 product includes Jumpstarter, Air Compressor, 12V Power Inverter, 12V outlet, 110/120 volt outlet, and Worklight. Priced at $89.97, the Guide Gear™ Power Station offers 400 watts of power and can be recharged from either home or vehicle (both AC and DC cords included). Jumpstarter cables stow neatly in the ends and the unit features heavy rubber protective edges.
September 8th, 2008
Robertson Composites has introduced a new benchrest stock design, optimized for 100- to 300-yard group and score shooting. It complies with all IBS, NBRSA, and international stock rules for short-range benchrest and is light enough to be used in a 10.5-lb Light Varmint rifle. Typical inletted bare weight, LV version, is 26 ounces. The stock was designed with input from ace Canadian and American benchresters.
While similar in external appearance to the Speedy BRX stock (also built by Robertson), the new stock has important new features. First, the forearm has raised flats on the sides to improve lateral stability and reduce the tendency to rotate in the bags. Second, the grip area is smaller and not as fat or thick as the BRX design. This should be more comfortable for those who prefer a light hold on the gun. Lastly, there are subtle changes to the area behind the action. The tang area has a greater downward slope to provide more clearance for the bolt when retracted.
Photos Courtesy Gary Walters. Rifle belongs to Victor Smith.
The new stock is currently in production and you can place an order. You can get any color combination you like (orange ‘granite’ is shown in the photo), and the stock can be built extra heavy on request. However, Ian Robertson reports: “we’re up to our ears in business right now, and it will take time to fill all the back-orders.” So, expect to wait a 8-10 weeks for delivery of your order. The new stock starts at $260.00 Canadian for a non-inletted stock in a single color, without buttplate. Two colors will cost $25.00 CND extra, and inletting is available for many popular BR actions for an additional charge.
CLICK HERE for complete Robertson Composites PRICE LIST.
September 5th, 2008
The F-Class Nationals are coming up soon. The Fifth Annual F-Class Championship will be hosted Sept. 30 – Oct. 4 in Lodi, Wisconsin (Winnequah Gun Club). Over 140 shooters are expected to attend. The Course of Fire at the F-Class Nationals requires shooting at multiple distances. That means you’ve got to carry your rifle and rest back and forth to various shooting positions. With rifles that top 20 pounds, it’s no fun to haul a super-heavy front rest around. Butch Lambert has come up with a solution — a special light-weight front rest.
Lambert Crafts Light-weight Front Rest
At the request of Larry Bartholome, current member and former captain of the U.S. F-Class team, Butch Lambert of Shadetree Engineering & Accuracy (S.E.A.), has designed and fabricated a lightweight yet stable front rest prototype. Larry wanted a unit that was less burdensome to haul between firing lines than the typical cast-iron or “heavy metal” front pedestal. (That’s Larry with his spectacular “Captain America” Shehane red, white, and blue MBR Tracker stock.)
Other than the steel center hub, the rest is built from aircraft-grade 6061 T-6 aluminum, which can be TIG-welded and hard-anodized. To keep weight down, the three horizontal legs are hollow tubes with flutes or slots milled top and bottom. Butch sent us these photos of the new rest, noting: “It weighs 2.25 lbs without the top. I set one of our unfinished rest tops on it. I moved the back leg to the front to get it out of the way. Larry is ‘wrong handed’, so I made it left-handed. I hope to get it TIG-welded together next week and plated. It is definitely easy to lug around, but I prefer something heavier for benchrest shooting. For F-Class, under a 22-lb rifle, Larry believes it should work well.”
|
