Gunsmith/stockmaker Doan Trevor created a lovely, one-of-a-kind silhouette stock for an Anschutz rimfire action. Built as a true custom design, this stock combines ideal standing position ergonomics with light weight — the entire stock weighs a mere two pounds. This project really showcases Doan’s remarkable skills with wood. Read the full story about this project (with more photos) at DoanTrever.com.
Doan explains his design process: “A customer came to me wanting to know if I could build a silhouette stock that was 2 pounds or less. I used the Koa wood because it is a lower specific gravity than Walnut (which makes it lighter) and stronger. I was still able to use pillar bedding and keep the weight down. The fore-end could be shortened to reduce the weight even more.
Since the drops on a silhouette rifle are different than a prone rifle, I kept the pistol grip from the prone rifle which is comfortable and tried to come up with a higher cheek piece and more drop to the buttplate. All of this required lots of hand carving.”
The National Rifle Association of America (NRA) has filed a lawsuit challenging the Bureau of Alcohol, Tobacco, Firearms and Explosives’ (ATF) “Engaged in the Business” Final Rule. The ATF’s Final Rule unlawfully redefines when a person is “engaged in the business” of dealing in firearms and therefore required to be federally licensed. This new lawsuit is being filed on the heels of recent U.S. Supreme Court decisions that have reined in executive branch agencies from acting outside of statutory authority. The NRA suit is named Butler v. Garland and has been filed in the U.S. District Court in Alabama (Northern District, Eastern Division).
“The ATF’s Final Rule stands to turn countless upstanding and well-intending citizens into criminals for exercising their constitutional rights,” said Randy Kozuch, Executive Director of the NRA Institute for Legislative Action (NRA-ILA). “When ATF released this Final Rule, NRA promised to use every means necessary to stop this egregious interpretation of the law. Now that the Supreme Court’s recent decisions in Loper Bright, Cargill, and Rahimi make clear that the ATF does not have unfettered authority to arbitrarily restrict NRA Members’ rights to buy and sell firearms, the NRA is fighting back.”
NRA, along with two individuals, Don Butler and David Glidewell, filed the lawsuit challenging the ATF’s Final Rule in the U.S. District Court for the Northern District of Alabama. The complaint alleges that the Final Rule violates the Administrative Procedure Act because it exceeds the ATF’s statutory and jurisdictional authority and is arbitrary and capricious; violates the Fifth Amendment because it is unconstitutionally vague; violates the Second Amendment by infringing the rights to keep, bear, buy, and sell arms; and violates the Separation of Powers, non-delegation doctrine, and Take Care Clause by usurping legislative powers and prohibiting lawful conduct by executive fiat.
In this Armed Attorneys Video, Emily Taylor and Richard Hayes discuss the effect of the new ATF Final Rule.
Under the Firearms Owners’ Protection Act (FOPA) of 1986 (which amended the Gun Control Act of 1968), someone is “engaged in the business” of dealing in firearms if that person “deal[s] in firearms as a regular course of trade or business with the principal objective of livelihood and profit through the repetitive purchase and resale of firearms.” The 2022 Bipartisan Safer Communities Act (BSCA) altered that definition by replacing “livelihood and profit” with “to predominantly earn a profit.” The BSCA did not alter FOPA’s exclusion for “a person who makes occasional sales, exchanges, or purchases of firearms for the enhancement of a personal collection or for a hobby, or who sells all or part of his personal collection of firearms.”
On April 19, 2024, ATF promulgated the Final Rule “to clarify the criteria for determining when a person is ‘engaged in the business.’” The Final Rule provides that “there is no minimum threshold number of firearms purchased or sold that triggers the licensing requirement” and that “there is no minimum number of transactions that determines whether a person is ‘engaged in the business’ of dealing in firearms. For example, even a single firearm transaction or offer to engage in a transaction . . . may require a license.”
The Final Rule also excludes firearms acquired for “personal protection” from the firearms that may be sold from a personal collection without a license. The ATF’s Final Rule thus rewrites the law, contradicts Congress’ statutory language, and adds confusion rather than clarification.
In our Shooters’ Forum, there’s an interesting thread about a very light hunting rifle. Featuring a Defiance ultra-light all-steel action, this 6.5×57 Lapua lightweight tips the scales at just 4.93 pounds including scope and rings! For reference, a half-gallon of milk weighs 4.3 pounds, so this rifle is LIGHT! Here’s a report from the proud owner who built the rifle for a future Kodiak Island Alaska mountain goat hunt.
Ultralight Rifle Report by Forum Member Dave
I decided I wanted the challenge of a Mountain Goat hunt after I turn 60. It was the perfect excuse to put together an ultralight, something I had wanted to do for years. I wanted to see how light a bolt action rifle could actually be. My goal was to stay under 5 pounds, without going to a Titanium action, including rings and scope. I knew this would be difficult but I did manage to achieve the goal.
I started with a Defiance anTi model Rem Model 7 short action. This is an extremely smooth action that weighs just 19.2 ounces in this size. I had Carson Lilja of Lilja Barrels program a barrel taper to my dimensions for a 6.5mm 1:8″-twist stainless, 3-groove 22″ barrel. As fitted in the rifle, the barrel is free-floated except for the first inch or so forward of the action.
Other rifle components are: Bix n Andy Dakota trigger, aluminum trigger guard, blind magazine with an aluminum follower, titanium action screws, and a Leupold 3-9X lightweight optic in Talley rings. I also had an aluminum adapter installed in the for-end to accept a magnetic mount Javelin carbon fiber bipod.
The rifle was chambered up in 6.5×47 Lapua by my friends at Sportsman’s Outfitters in Knox, Pennsylvania. Then I sent the barreled action to Wayne at Oregunsmithing (Pendleton, OR) to have a Kevlar stock built. The stock weighs a whopping 14 ounces! When it came back I had everything Cerakoted (see bottom photo before coating). This stock was a full custom, built around my barreled action. Wayne’s work was reasonably priced with a 3-month turn around.
Excellent Accuracy — 5/8″ Three-Shot Groups at 100 Yards
Now it was time to shoot the rifle and I was not disappointed. It shoots both Barnes TTSX 100s or Swift Scirocco II 130s into 5/8″ at 100 yards. Off a bipod at 400 yards, three go into 3″ or so. This thing is crazy light even though it wears a 22″ barrel.
Without scope and rings, before Cerakoting the action and barrel, this 6.5×47 rifle tipped the scales at a mere 4.20 pounds (67.2 ounces). Check it out:
We have always liked Tikka actions, and now there is a great re-barreling option for Tikka T3 owners. Criterion Barrels Inc. (CBI), makers of “pre-fit” barrels for Savage, Remington, and Rem-clone actions, also produces Tikka pre-fits. These pre-chambered barrels for Tikka T3 actions will be headspaced with a barrel nut, just like a Savage.
Click image for full-screen version
Criterion’s Tikka T3 pre-fit barrels can be purchased through Solid Accuracy, a respected Texas-based outfit that sells high-end scopes, stocks, barrels and other rifle components. Solid Accuracy states: “Each Solid Accuracy/Criterion pre-fit barrel features a hand-lapped bore and meets extreme quality control standards. Utilizing a proven barrel nut design, these barrels can be swapped in just a few minutes using only a barrel nut wrench and the appropriate headspace gauge set. Solid Accuracy offers finished lengths up to 30″ with multiple contour options.” Current price for T3 and T3X Barrels is $495.00 which includes Barrel Blank, Barrel Nut and Wrench, and Barrel Threading with Thread Protector for the muzzle.
These Tikka pre-fits were first introduced in 2017, and the accuracy results were impressive. Solid Accuracy’s initial test rifle featured a Tikka T3 action mounted in a KRG X-Ray chassis, with Criterion barrel chambered in 6.5 Creedmoor. The group below was shot with a stout load of H4350 and Sierra 140 grain MatchKings seated .009″ in the lands.
Criterion is proud of how well the Tikka pre-fit project turned out. These barrels work great in the Tikka platform. One of Criterion’s staffers was so impressed with the initial test results that he is built his own Tikka T3 rifle, with a Criterion pre-fit of course…
Mike Kurtz’s Competition Machine F1 “Pro-Mod” F-Open Rifle
Today’s Sunday GunDay article showcases a modern F-Open Rifle built on a Competition Machine Aluminum Chassis. This is quite a bit different than a typical F-Open rifle with a laminated wood or wood/carbon stock. But the rifle shoots extremely well, and has already won some mid-range F-Open matches.
The rifle’s owner, a highly respected vehicle mechanic, explained his objective with this rifle: “I wanted to build a second F-Open rifle to shoot primarily 600-yard Mid-Range and also serve as my back-up long range rifle. That way I can use the same brass, bullets, and primers. So it would be chambered in 7mm-6.5 PRC, the same as my other F-Open rifle. That rig is a 7mm-6.5 PRC with Cerus XR stock, BAT Neuvo action, and Bartlein 1:9-8.7″ gain-twist barrel. I absolutely love that rifle and it has achieved several top honors. But for this project, I wanted to try some different rifle components to see how they performed in this same caliber. So I decided to go with Brux barrels, BAT Neuvo aluminum action (but see below), and an Eliseo Competition Machine F1 aluminum alloy chassis.”
BARREL SPECIFICATIONS: I ordered two Brux 7mm x 33″ barrels with 1:8.5″ twist. The contour was supposed to be 1.350″ diameter for 5″, tapered-down to 1.150″ diameter at the muzzle end. However, when the barrels arrived they were tapered down to 1.050″, a bit smaller. The folks at Brux admitted the work order was mis-read and offered to take back the barrels and make me two more. Or, I could keep the barrels with nice discount. I contacted my gunsmith, Omar Alonzo, for his advice and he said to keep them, they would shoot just fine. That turned out to be a blessing because the total rifle weight is now just three ounces under 22 pounds with one of these barrels. Omar chambered it with his 7mm-6.5PRC “no-turn” reamer that was used on my Cerus rifle. The Brux barrel was finished at 32″ with the muzzle end threaded for a V2 tuner.
ACTION and TRIGGER: I intended to use an aluminum BAT Neuvo action because I anticipated weight may be a concern, but they were on back-order with no lead time in sight. So for now I went with a used steel BAT Model M, 1.47 Octagon action that I acquired via the AccurateShooter Forum marketplace. This is a RBLP Right Eject action with magnum bolt face and 20 MOA integral Picatinny rail. The trigger is a Bix’N Andy Competition also scored on the Forum, set at 3 ounces. [NOTE: I now have an aluminum Neuvo AL in my possession. However, the F1 rifle is shooting so well, I’ll save the aluminum Neuvo for a future build.]
STOCK and FINISH: When I was planning my second F-Open 7mm-6.5 PRC rifle build, Gary Eliseo’s F1 aluminum chassis was my immediate choice. I was already familiar with Gary’s products since I started out three years ago with a used 6BR-chambered R1 tube gun. I purchased it from a Forum member and I adapted it for Mid-Range F-Open very successfully. Being a long-time drag racer and fabricator piqued my interest in these aluminum chassis combos. I contacted Gary Eliseo at Competition Machine and ordered his F1 F-Open Chassis System with one of his custom-machined bedding blocks for the Bat M action I acquired off the Forum.
Video of F1 Chassis Rifle in Action
Turn-around time was just about eight weeks, including aligning and epoxying the action bedding block into the chassis. Gary Eliseo offers full custom Cerakote services for his customers but I had something else in mind so I had the chassis sent to me “raw”, i.e. with a bare aluminum finish. At first I thought about polishing some or all the entire chassis but that would be too high maintenance. I decided to go with anodizing as I have done in the past with many race car components. Anodizing is an electrochemical process that converts the metal surface into a decorative, very durable, corrosion-resistant, anodic oxide finish that’s pretty tough and looks great!. This finish is available in many colors and in clear.
While I was surfing the internet looking for some color/combo ideas I stumbled on a local custom anodizer who had dozens of some really wild and crazy anodizing patters and color mash-ups. I messaged Stephen @ Caustic Customs and told him about my project. He replied that his specialty is paint-ball guns and this would be his first long gun but, hey, it’s aluminum! I gave him all the pieces of my F1 chassis. There were a couple of his patterns I really liked so I asked his opinion which he thought might look best for my project. He replied why not both? So I instructed him take both patterns and “run with it”. The end result is the Icy-Hot blue/red finish as seen in the pictures.
It all came together at Alonzo’s Custom Rifles in Pasadena, Texas. Omar hand-lapped the action bedding block surface to smooth-out some tiny high spots. He then skim-bedded the action with an epoxy filler to make sure the action made 100% contact with the bedding block. Barrel chambering, action fitting, trigger tuning, and final assembly was performed by Omar.
I finished the rifle with a hydraulic recoil pad from Falcon Strike and Anarchy Outdoor’s Penguin Precision Grip. Gary designed the F1 to utilize AR15-style grips. The Falcon Strike pad is not as sexy as the R.A.D. unit I have on my Cerus-stocked rifle, but I think its recoil-absorbing performance is up there with the R.A.D. unit. So, if a RAD is not in your budget or if weight is a concern, you can’t go wrong with a Falcon Strike recoil pad.
SCOPE/RINGS: My intention was to switch my March-X 8-80x56mm Majesta High Master scope between my two rifles. However the hefty stainless Bat M action nixed that idea. So to ensure the new rifle would be F-Open legal weight I went with a used March-X 10-60x56mm High Master scope that I acquired through the AccurateShooter Forum Marketplace. That 10-60X March, shown in the video, is almost 11 oz. lighter that my 8-80X March-X Majesta HM. NOTE: In some of the photos here, the rifle is fitted with an older March 8-80X scope (NOT the latest Majesta). The rings are March Superlight Titanium Ghost Rings — under 5 oz. for the set, the lightest I could find.
F-Open F1 Chassis Rifle Specifications
Chambered for: 7mm-6.5 PRC Wildcat
Stock: Competition Machine F1, F-Open Chassis, Falcon Strike Recoil Pad, Anarchy Outdoors Penguin Grip. Custom anodizing by Caustic Customs.
Trigger: Bix’N Andy Competition trigger
Action: Bat Model M — Right Bolt, Left Port, Right Eject with 20 MOA scope rail
Barrel: Brux 7mm, 1:8.5″ twist, 32″ overall, 1.350″ x 5″, tapering down to 1.050″, V2 Tuner
Scope: March-X 10-60 High Master, MTR-1 reticle. March Ultra-Lite Titanium Ghost scope rings.
Gunsmith: Alonzo Custom Rifles
CARTRIDGE COMPONENTS and LOADING METHOD: I use Lapua 6.5 PRC brass, Berger 180gr Hybrid bullets and Federal 210M primers. New brass necks are expanded to 7mm and skim-turned to get a consistent .014″ neck thickness. I use a 35-degree cutter and go just a slight bit into the shoulder to ward off donuts. I then chamfer the flash holes, uniform the primer pockets, full-length size the cases, then expand and trim/chamfer the necks. My fired brass gets annealed, wet-tumble cleaned, full-length sized/expanded, and trimmed in that order. Bullets are pointed and then sorted by OAL. Primers are sorted by height and then by weight. I apply Neo-Lube to the inside of the necks with a foam Q-Tip for consistent seating psi.
This is from a 600-yard match shot with the F1 rifle a few months ago. Despite a strong wind from behind constantly switching right to left, I scored a 200-12X — good enough for Second Place.
LOAD DEVELOPMENT PROCESS: Thanks to some good 7mm-6.5 PRC load data posted on AccurateShooter.com, it helped me with a starting point to find a nice velocity node at 2865 fps using Hodgdon H4350. I did this by shooting some 2-shot groups seated .010″ off the lands. my focus was to find a node where the velocity leveled-out in at least two 0.5 grain increments in the 2850-2880 fps range. I then did a seating depth test at 100 yards to find my ideal seating depth which ended up at .024″ jumped. Next, I did some 3-shot groups at 100 yards to dial-in he barrel tuner until I got at least two consecutive ultra-tight groups. I verified that setting with a one-hole, three-shot group.
About Mike Kurtz
Michael Kurtz is owner/operator of Century Automotive & Transmission. An ASE Master L1 Technician since 1983, Mike has been an avid drag racer over the last 40 years. Mike notes: “I never owed any kind of rifle until I retired from racing. Got bit by the accuracy bug and learned about F-Class in 2021. I read several reloading and long range shooting books while I scoured the AccurateShooter Forum Marketplace for a rifle, scope, rests, and reloading equipment for my first F-Open rig. Most all of my major components I acquired via online Forums. I have to attribute the early success of my F-Open accomplishments to the vast content found on AccurateShooter.com.
I am also a member at Bayou Rifles Inc. in Houston Texas where I’ve learned from some of the best shooters in the country. The competition here is fierce but the camaraderie is second to none!”
Looking for a superb illustrated coffee table book about guns? Yes there is such a thing, a great book we highly recommend — The Illustrated History of Fireams (2nd Edition). This full-color 320-page hardcover book features more than 1,700 photos compiled by NRA Museums curators Jim Supica, Doug Wicklund, and Philip Schreier. This Second Edition includes 300 photos more than the original, plus dozens of new profiles of important persons who influenced firearms development.
This follow-up to the best-selling original NRA Museums book is loaded with great images, historical profiles, and technical data on old, new, and currently-manufactured firearms that have changed history. Covering the earliest matchlocks to modern match-grade superguns and everything in between, The Illustrated History of Firearms provides a fascinating education on how guns evolved, where they originated and how they worked.
The Illustrated History of Firearms, 2nd Edition
– Authored by the experts at the NRA Firearms Museums
– Published by Gun Digest Books
– 9 ½ x 11 1/2 inches, hardcover with dust jacket
– 1,700 full-color photos
– 320 Pages
– Price: $39.99 (MSRP); $31.61 on Amazon
The Illustrated History of Firearms, 2nd Edition is available from Amazon direct for $31.61. Amazon also lists lightly used versions of the book starting at $22.00 (plus $3.99 shipping) from a variety of other book vendors. You’ll also find the book at major bookstores such as Barnes & Noble, but it’s probably easier to purchase online.
This hefty 516-page book covers “Pistols, Rifles, Revolvers, Machine And Submachine Guns Through History”. This major resource is illustrated with 1100 photographs, and covers the whole spectrum of guns.
Priced at $29.77 on Amazon, this book would make a great gift for a gun collector, and could be a nice addition to a local gun club library. The Illustrated World Encyclopedia of Guns has proven very popular with buyers, earning 83% five-star ratings on Amazon among verified purchasers.
Historic American Arms — Teddy Roosevelt’s Lever Guns
These two lever action rifles, owned by President Theodore Roosevelt, are part of the NRA Museum collection. First is a Winchester 1886 rifle known as the tennis match gun because Roosevelt used winnings from a tennis match to buy it. Below that is a suppressed Winchester model 1894 rifle. Roosevelt liked to shoot varmints around Oyster Bay (Long Island, NY) with this gun so he wouldn’t disturb his neighbors — the Tiffany and Du Pont families.
About the NRA Museums
The NRA opened the original National Firearms Museum at its Washington DC Headquarters in 1935. In 2008 the Francis Brownell Museum of the South West opened at the NRA’s Whittington Center in Raton, NM. Then, in 2013, the National Sporting Arms Museum opened at the Bass Pro Shops store in Springfield, MO. Every year, at these three museum facilities, over 350,000 persons visit to see the impressive exhibits and many of America’s most famous firearms. For more information, visit www.NRAMuseum.org.
How is a modern, metal-chassis rifle built? This very cool video from Masterpiece Arms answers that question. The nicely-edited video shows the creation of a Masterpiece Arms tactical rifle from start to finish. All aspects of the manufacturing process are illustrated: 3D CAD modeling, CNC milling of the chassis, barrel threading/contouring, chamber-reaming, barrel lapping, laser engraving, and stock coating. If you love to see machines at work, you will enjoy this video…
Real Avid sells a unique multi-tool designed expressly for rifles and shotguns. The $29.99 Gun Tool™ combines 18 of the most commonly used long gun tools in a compact package. The Gun Tool boasts three Torx wrenches (T20; T15; T10), two Allen hex drives (3/32″; 5/32″), and four screwdriver blades (1/8″ flat; 3/16″ flat; Phillips 1 & 2). In addition, there is a magnetic 3/16″ driver, a pin punch, and a stainless claw blade useful for opening shipping boxes or trimming target backers.
The most unique feature of the Gun Tool ($30.35 on Amazon) is a stepped, multi-size choke-tube wrench that fits six shotgun bores from .410 all the way up to 10 gauge (see photo below right). For active shotgunners, that provides great versatility in a small package.
Praise from Respected Reviewers
In 2012, the NRA’s American Hunter magazine awarded The Gun Tool their Golden Bullseye award in the “Gear of the Year” category. The Gun Tool has also been awarded an outstanding 100% approval rating and a full endorsement by the North American Hunting Club.
Noted gun journalist Jim Shepard wrote: “I’ve been playing with ‘The Gun Tool’… and I’ve found it to be a pretty promising device that really should find a place in lots of range bags. If you’re a long gun shooter, it has something you’ll eventually need in the way of a tightening/loosening/adjusting tool.” Jim cautions that the claw blade does not lock into place.
The Biden administration, through its Commerce Department Bureau of Industry and Security (BIS), will impose new gun export restrictions starting May 30, 2024. These restrictions will affect a wide range of gun exports to 36 countries world-wide. These new restrictions follow gun export “pauses” mandated last October. Fox News explains:
“The Biden administration plans to impose new restrictions on firearms exports and increase scrutiny on transactions … a Commerce Department official said late on Thursday. The department on Oct. 27 issued a pause on most firearm exports to assess the ‘risk of firearms being diverted to entities or activities that promote regional instability, violate human rights, or fuel criminal activities.’
The Department plans to announce on Friday it will lift the pause from May 30 when the new restrictions take effect. The Commerce Department expects the restrictions to result in about a 7% reduction, or $40 million, out of the $600 million in average annual U.S. firearm exports, the official said.”
Additionally, the Commerce Department will revoke some export licenses and will cut some licenses from four years to one-year. SEE Legal Analysis.
Biden Administration Restriction of Firearms Exports By Larry Keane, NSSF Senior V.P. and General Counsel
“President Joe Biden’s relentless rebukes of the firearm industry and law-abiding gun owners isn’t just an infringement on our Second Amendment rights – it’s a calculated and well-financed attack on the fabric of American liberty. President Biden calls the firearm industry ‘the enemy’ and his administration is systematically attempting to dismantle the industry and pander to the whims of radical gun control lobbyists. The evidence is clear, and the statistics damning.
The Department of Commerce’s Bureau of Industry and Security (BIS) recently finalized a rule that made a 90-day firearm export ‘pause’ permanent policy and created burdensome regulatory requirements. Sold under the guise of national security, this policy will hamstring the U.S. firearm industry’s competitiveness and cost thousands of good-paying jobs by impeding a critical revenue source. The economic impact is staggering, with estimates far exceeding $250 million – a devastating blow to an industry already reeling from government overreach.” READ Full Story on NSSF.org.
This new Department of Commerce Rule goes into effect on May 30, 2024. The new firearms export policies are explained in the Federal Register:
“In this interim final rule (IFR), the Bureau of Industry and Security (BIS) is amending the Export Administration Regulations (EAR) to enhance the control structure for firearms and related items[.] This rule identifies semi-automatic firearms under new Export Control Classification Numbers (ECCNs); adds additional license requirements for Crime Control and Detection (CC) items, thereby resulting in additional restrictions on the availability of license exceptions for most destinations; amends license review policies so that they are more explicit as to the nature of review that will accompany different types of transactions and license exception availability (including adding a new list of high-risk destinations); updates and expands requirements for support documentation submitted with license applications; and better accounts for the import documentation requirements of other countries (such as an import certificate or other permit prior to importation) when firearms and related items are authorized under a BIS license exception. … This rule is effective May 30, 2024.”
For this Saturday Video Showcase we are featuring products and operations of Kelbly’s Inc. We are doing this to help help honor the memory of George E. Kelbly Sr., the man who founded Kelbly’s Inc. producers of superb actions, stocks, and complete rifles. In addition, George Kelbly Sr. created the impressive range where the annual Super Shoot benchrest competition was held for many decades. Sadly, George passed away on May 14, 2024. He will be missed — George Kelbly Sr. was a great leader in the shooting community.
Kelbly’s Product and Gun-Building Videos
Want to see new-born Pandas? No, not the furry kind — rather Stolle Panda actions produced with state-of-the-art CNC machinery. If you’ve ever wondered how precision benchrest, long-range, and tactical rifles are built, check out this first video from Kelbly’s. You’ll see actions finished, barrels chambered and crowned, pillars installed in stocks, barreled actions bedded, plus a host of other services performed by Kelbly’s gunsmiths and machinists.
Click Volume Control to Activate Sound for Kelbly’s Video:
If you’re a fan of fine machine-work, this video should be both informative and entertaining. You can see how precision gun work is done with 21st-Century technology. Tip of the hat to Ian Kelbly and crew for producing this excellent video visit to the Kelbly’s production center. CLICK HERE to watch this video full-screen with full sound and no auto-start. That will make it easier to see production details.
Kelbly’s Super Shoot — Group-Shooting Benchrest Action
Here is a video from the 2022 Kelbly’s Super Shoot, the last-ever Super Shoot event held at the impressive Kelbly’s range in Ohio. The Super Shoot is a 100- and 200-yard benchrest competition with the world’s top group shooters. The Super Shoot, in the post-Kelbly’s phase, is now run by Super Shoot Sports with major sponsorship from Shilen. The 50th Super Shoot will be held May 20-23, 2024 (this coming week) at the St Louis Benchrest Club.
Above is another Kelbly’s Range video from a decade earlier at the 2012 Super Shoot. This has excellent footage showing the firing line and the forest of wind-flags.
Kelbly’s Nanook Lightweight LR Hunting Rifle
Kelbly’s impressive Nanook MG rifle features a magnesium chassis, with a 26″ carbon-wrapped barrel and folding stock. Strong yet light, the 7.9-lb Nanook MG is a long-range hunting rifle that’s easy to carry, yet can effectively shoot big-caliber cartridges capable of taking large game.
Guide to Kelbly’s Hunting and Tactical Actions
This video by Preferred Barrels features four modern hunting/tactical actions: Atlas Lite, Nanook, Atlas Tactical, and Prometheus. These actions stand out for their precision engineering, making them a top choice for both hunters and competitive shooters. The unique TG ejector system ensures reliable mechanical ejection, reducing reliance on chamber pressure and maintaining shot alignment. These actions are a good choice for PRS/NRL shooters as well as traditional hunters looking for lightweight precision.
Kelbly’s F-Class Panda Action
Here is a short third-party review of the impressive F-Class Panda Action from Kelbly’s. This is popular with competitors because the action has a wide, flat bottom that beds securely, plus the action has a built-in +20 MOA rail. These actions have a smooth movement and can deliver great accuracy. The F-Class Panda action is offered in both short and long versions, starting at $1600.00.
Firing Pin Maintenance — Kelbly’s Tutorial
The last video in today’s Saturday showcase offers some very important tips on maintaining your firing pin. While this features Kelbly’s action components, many of the observations apply to other modern actions as well. You definitely want to keep your firing pin in good order as pin problems can lead to unexpected fliers, or decreased accuracy on target.
I am also a member at 
Biden Administration Restriction of Firearms Exports
For this Saturday Video Showcase we are featuring products and operations of Kelbly’s Inc. We are doing this to help help honor the memory of George E. Kelbly Sr., the man who founded 
