|
|
November 5th, 2010
 Big Volume Offers Nearly 1100 Pages of Info
With its massive new 8th Edition, Hornady has compiled its most comprehensive Cartridge Reloading Handbook ever. The 8th Ed. Handbook has data for many new propellants, including Superformance, LEVERevolution, Reloder 17, 4007SSC, 8208XBR, Hybrid 100V and more. The new Handbook also features the latest information for the newest Hornady bullets including: FTX, GMX, DGS, DGX, and favorites like V-MAX, InterBond, SST, InterLock and XTP.
New Cartridges Included in 8th Edition
Hornady’s Reloading Handbook now covers many of the popular new accuracy and hunting cartridges. New cartridge additions include the 6.5 Grendel, 6.5 Creedmoor, 30 TC, 300 RCM, 338 RCM, 308 Marlin Express, 338 Marlin Express, 375 Ruger, 416 Ruger, 450 Nitro Express, 470 Nitro Express, 500 Nitro Express and more.
Hornady’s New Reloading Handbook (item #99238) ships in December — just in time for Christmas. It will be sold through shooting gear vendors, such as MidwayUSA, as well as through book-sellers such as Amazon.com.
Online Ballistics Guide Offered
Supplementing the information in its new Loading Handbook, Hornady offers a web-based Ballistics resource, with an interactive Ballistics Calculator. Use this to plot your ammo’s trajectory and determine the terminal energy of your rounds. In addition, the Ballistics resource has easy-to-understand, authoritative explanations of internal, external and terminal ballistics. Check out the features of Hornady’s Ballistics Resource below:
|
Click the above link to learn what physically occurs inside the gun barrel when a projectile is fired.
Click the above link to learn what happens to a projectile after it leaves the barrel.
Click the above link to learn how a projectile acts when it encounters the target.
Calculate trajectory and wind drift using Hornady’s interactive Ballistics calculator. Just click the graphic above and then fill in your cartridge information.
|
 |
November 1st, 2010
 Here is the book we have all been waiting for. Tony Boyer, by far the greatest shooter in the history of short-range benchrest competition, has finally released his new 323-page book. It’s a beautiful product, full of color photos from cover to cover. Every serious benchrest shooter should read Tony’s book. He has dominated registered benchrest in a fashion that will never be duplicated. Tony Boyer has 142 U.S. Benchrest Hall of Fame points. That total is unprecedented. The next closest shooter, Allie Euber, has 47 Hall of Fame points.
The full-color book is 323 pages long, and there are color photos or color illustrations on nearly every page. The hard-cover first edition costs $42.50, while the soft cover version is $34.50. These are available from Bruno Shooters Supply, 1-800-455-0350. You can also buy directly from Tony Boyer’s publisher, Turks Head in Washington state, by visiting www.RifleAccuracyBook.com.
Special Limited Slipcase Edition, Signed by Tony Boyer — 500 Only
A total of 500 limited-edition, hardback versions of the Boyer book were printed. These 500 limited edition books are all signed by Tony Boyer. Cost is $64.50, and that includes a fitted external slipcase to protect the book’s cover. The Boyer-signed, limited edition books are offered exclusively through Turks Head. Call (206) 782-4164 (ext. 0) to order, or visit www.RifleAccuracyBook.com.
If you want a limited, signed edition, you should act quickly.
The Book Of Rifle Accuracy, By Tony Boyer
Hard Cover, Bruno Code: TBHC — Price: $42.50 | Soft Cover, Bruno Code: TBSC — Price: $34.50
October 29th, 2010
 Yes, you Bob Lee Swagger fans, Stephen Hunter has finished a new novel, Dead Zero, set for release on December 28, 2010. In the new book, Swagger, the marksman/hero of seven of Hunter’s novels, is involved in Afghan intrigue. Swagger is recruited by the FBI to stop a a Marine scout-sniper who has “gone rogue” with plans to kill Ibrahim Zarzi, an Afghani warlord. Zarzi happens to be an American “asset” and the alphabet intelligence agencies need to keep him breathing. The problem is that, the more Swagger uncovers, the more he questions the U.S. government’s connection with Zarzi. The novel explores the shifting loyalties of international foreign policy, where enemies become friends, and friends become enemies.
Dead Zero features an older, more contemplative Swagger, but the book still delivers plenty of action. And, as we’ve come to expect from Stephen Hunter, the new book features accurate and precise writing about firearms technology and sniper techniques. Hunter is perhaps the only current best-selling author with a solid understanding of ballistics, modern firearms, and long-range marksmanship.
Pre-Order through Amazon.com
You can pre-order “Dead Zero” through Amazon.com for December delivery. Just click the link at right. The Kindle edition is $12.99, while the hardback version is $15.60.
About the Author
Stephen Hunter has written 16 novels, including seven Bob Lee Swagger books, starting with Point of Impact. The retired chief film critic for The Washington Post, Hunter won the 2003 Pulitzer Prize for Distinguished Criticism. Hunter talks about his new book, Dead Zero, in the Youtube video below.
Visit Amazon’s Stephen Hunter Page |
|
Stephen Hunter Talks about Dead Zero, his new novel.
This video is quite funny in spots and Stephen does plenty of shooting….
October 29th, 2010
 21st Century Shooting has just introduced what may be the most advanced powder funnel on the market. It has everything you could want. The top section is precision ground and polished for a smooth flow. The center has a see-through tube so you can watch the progress of your powder dropping into the case. At the bottom of each funnel is a precision brass collar insert that allows the funnel to stand on the case without tipping off. The collars are offered in nine, caliber-specific sizes: 17cal, 20cal, 22cal, 30cal, 5mm, 5.5mm, 6mm, 6.5mm, and 7mm. In addition, 21st Century offers custom-milled collar inserts fitted precisely to your cases. That way you can get a perfect fit on neck-turned brass. Just mic your casenecks and 21st Century will craft a custom insert.
Each funnel, with one caliber-specific insert, costs $21.75. Additional standard inserts are $5.75. Call 260-273-9909 for pricing on custom inserts.
October 14th, 2010
 The 2011 edition of the Hodgdon® Annual Manual has just been announced, and should be at newstands in January 2011. Now in its 8th year, the Hodgdon Annual Manual includes over 5,000 rifle and pistol loads, with information on 29 Hodgdon, 19 IMR® and 10 Winchester® brand powders, with updated propellant burn rate and usage charts.
The new 2011 Manual features 31 cartridge updates including the new 30 AR Remington and 338 Marlin Express. The latest manual of course incorporates the 44 cartridge updates from 2010, which included data for the 6.5 Grendel and 6.5 Creedmoor.
Extensive reloading information is provided for popular cartridges such as the 223 Remington, 204 Ruger, 6PPC, 6mmBR, .243 Win, 308 Winchester, .30-06, 338 Federal and more. In addition, the 2011 manual boasts 70 pages of shooting and hunting feature articles by top outdoor writers.
New Superformance Powder Data Included
The 2011 Hodgdon Annual Manual includes comprehensive load data for the two new Hodgdon powders, Hornady® Superformance™ and Hornady LEVERevolution®. This pair of advanced, high-speed propellants are currently used in Hornady’s factory ammunition. Both powders can provide a significant performance boost in many popular cartridges.
The 2011 Hodgdon Annual Manual costs $8.99 at news-stands or $11.99 delivered via mail from Hodgdon. To order call 913-362-9455, visit Hodgdon.com, or write to Hodgdon Powder, 6231 Robinson, Shawnee Mission, KS 66202.
October 12th, 2010
MidwayUSA has teamed up with Burris Optics to produce a new scope that should be ideal for Multi-Gun competition. The new Burris Fullfield TAC30, sold exclusively thorugh MidwayUSA, features 1X to 4X adjustable magnification and a 24mm objective. The illuminated Ballistic CQ reticle provides hold-over points for the longer stages. The scope body is sealed and nitrogen-purged. Sean Doke, MidwayUSA’s Optics Manager noted: “We listened to our Customers and partnered with Burris to create a unique scope that met our customers’ requirements. The new Burris Fullfield TAC30 allows for rapid engagement of close quarters targets while also providing holdover points out to 600 yards.”
The scope, finished in Burris’s popular Dark Earth Color, is constructed with quality, multi-coated lenses. The new TAC30 retails at MidwayUSA for $339.99, and is covered by the Burris Forever Warranty which states: “If [this product] is ever found to have defects in materials or workmanship, Burris will, at our option, repair or replace it at no charge, even if you are not the original owner.”
October 10th, 2010
 RCBS has recently started shipping two new Rifle Bullet Feeder Kits for progressive metallic reloading presses. Availble for 30-caliber and 22-caliber, the Rifle Bullet Feeder Kits are designed to fit on most 7/8″-14 threaded progressive presses. An electrically-powered collator unit orients the bullets to drop directly into the feed mechanism where they are placed precisely in the case-mouths of your cartidges.
Feeder Kit Can Increase Load Rate by 50%
The 30-Cal hopper holds approximately 125 (180gr) 30-caliber bullets while the 22-Cal feeder holds about 250 (55gr) 22-caliber bullets. RCBS claims that both units increase load rates by 50%. We’d say that depends on how fast you operate your machine. On this Editor’s RCBS 2000 Progressive press I can usually pick up a bullet and place it in the case mouth in about 2-3 seconds. But now and then I will fumble with a bullet or place it in slightly tilted, requiring me to do it all over again. That’s where the feeder comes in very handy — the bullets always orient correctly in the case. We just wish RCBS offered .45 caliber and 9mm versions for pistol ammo and a 6mm version for rifles. RCBS says these calibers may be offered in the future.
RCBS Bullet Feeder Features:
• Available for either 22-caliber or 30-caliber
• Large hopper for non-stop reloading and max output
• Bullets are oriented to drop directly into feed mechanism/seat die
• Bullet feeding and seating are accomplished in one station.
• Adjustable collator height
• RCBS® two-year warranty
Feeders Increase Reloading Efficiency
The power-operated collator unit ensures each bullet component is properly oriented for feeding directly into the seat die. “This steady stream of properly-aligned bullets increases the consistency of your reloading process,” explains Kent Sakamoto, product line manager. “Red, green or blue, our new Rifle Bullet Feeders fit all progressive presses and increase the seed and consistency of reloading. That’s what these Bullet Feeders bring to the reloading table.” Here is a video we took at SHOW Show 2010 where the RCBS Bullet Feeder was previewed by Sakamoto:
October 9th, 2010
Stephen Ivey has engineered a set of gimbaled scope rings allowing up to 150 Minutes of Angle (MOA) of elevation. These rings have precision hinge pins front and rear allowing the entire scope to be tilted by a micrometer-controlled cam in the rear. This allows the scope to tilt upwards (in the rear) with the front ring as the axis while both rings remain parallel to prevent scope binding. The rear ring tilts to match the front while a cam pushes it up. Ivey also makes tilting +150 MOA Picatinny riser rails.
Ivey offers two scope-mounting products. First is the RT-150 Ring set (above). This has two, polished 30mm or 34mm 6061-T6 aluminum rings with bases to fit a Picatinny profile or mil-spec 1913 rail with standard 5mm cross slots at 10mm spacing. (Weaver installation requires extra cross-slots to be cut.) Total elevation is +150 MOA. The micrometer adjuster is graduated in true 1 MOA intervals, with 5 MOA of elevation change per rotation. This product costs $525.00 and requires at least 5-1/2″ length mounting base.
The newest product is the MSRR-150MOA Riser Rail, a pivoting 5.75″-long Picatinny-style rail that accepts Weaver-style clamping scope rings. This Adjusts from Zero to +150 MOA and raises the scope 1.45″ from the top of the action. The extra height provides clearance for large objectives when the unit is tilted for a full +150 MOA elevation. Cross slots are 5mm wide at 10mm (.394″) spacing. The $525.00 riser rail is made of 6061 T6 Aluminum hard-anodized black. Clamps are heat-treated steel. The micrometer thimble is marked for 1 MOA gradations, and provides 20 MOA per revolution.
The Ivey products are expensive, to be sure, but they are beautifully machined, and they offer unique capabilities for ultra-long-range shooters. With the +150 MOA units you have enough elevation to shoot at 2000+ yards! We like the idea of using the micrometer to dial within 1 MOA and then just using the scope turrets for fine-tuning. To learn more, visit the Ivey Shooting website, or call Stephen Ivey at (615) 896-9366, or email him at sales [at] iveyshooting.com .
October 6th, 2010
Hornady plans to release a brand new 285gr, .338-caliber match bullet within the next few weeks. This bullet, which boasts a mind-blowing 0.735 G1 BC, has already proven itself in competition. At the 2010 IBS 1000-yard Nationals in September, Scott Fletcher won the Heavy Gun (HG) group title shooting the new Hornady 285gr BTHPs. Scott’s 4-match, 10-shot per target group Aggregate was 9.148″. Scott was shooting a large wildcat, the .338 Sloan. That cartridge is nearly identical to the new .338 Norma Magnum*, which could be described as a “chopped” .338 Lapua Mag — shorter with less case capacity.
Weight is unlimited in the 1000-yard Heavy Gun class. Weight soaks up the recoil of big cartridges like the .338 Norma Magnum, making them manageable to shoot. The Big 30-Cals have long dominated this HG category, but some shooters like Fletcher are experimenting with some really big cartridge/bullet combinations, in pursuit of class-leading ballistics. We don’t know how fast Fletcher pushes his prototype Hornady 285s, but that 0.735 BC has to give the bullets awesome performance in the wind.
Artist’s concept — No photos of the new bullet are available.
New Manufacturing Process Produces Bullets with Near-Zero Run-out
According to Hornady’s Chief Ballistic Scientist Dave Emary, the new 285-grainer is a VLD-style, secant ogive projectile with a standard, drawn-copper jacket and lead core. This is a BTHP, NOT a plastic tip bullet like Hornady’s A-Max designs. Emary says, “This bullet was originally developed for the military. It has just about the lowest drag possible with conventional bullet construction and ogive design.” The .338-caliber 285gr bullet is the first of two new super-low drag bullets Hornady will be releasing before the end of the year.
The new 285gr bullets are built with a new manufacturing process that improves jacket concentricity to previously unattainable levels. Emary says: “Measured along the entire jacket, these bullets have extremely low eccentricity. We measured zero to a couple ten-thousandths total run-out along the whole jacket. As a result the bullet has show truly outstanding long-range performance, with sub-half-MOA accuracy at extreme ranges.” Hornady Project Engineer (and 1K shooter) Joe Thielen added: “These bullets are specifically designed and built for long-range use, and the jackets are the some of best I’ve ever seen.”
When will the new bullets be available? End of the year at the latest. Emary says the 285s should be available “before the end of November”. When we asked Hornady Marketing guru Steve Johnson, he said “Soon. They’ll be out soon.” When pressed as to “how soon”, Steve responded: “The release is imminent… imminent”.
*The .338 Norma Magnum was originally developed by the American sport shooter Jimmie Sloan as a long-range sport shooting wildcat cartridge. It was designed to shoot the .338-caliber, 300gr Sierra MatchKing projectile from actions/magazines too short for a .338 Lapua Magnum. Sloan licensed the design to the Norma group. Both the .338 Norma Mag and the larger .338 Lapua Mag are derived from the .416 Jeffreys, but the .338 Norma Mag fits in a shorter action.
October 5th, 2010
South African Pieter L.R. (aka “Baboonstalker” in our Shooters’ Forum), has crafted an impressive single-torch annealing machine with a compact footprint. Pieter’s new KinetiX Precision Annealer holds cartridge brass cases in a dished carousel (wheel) machined from billet. An electric motor advances the carousel while a separate belt-driven spindel rotates each case when it in positioned in the flame. The standard wheel holds cases up to .308 bolt-face in diameter, and Magnum wheels are available.
Precision Mount for Torch-Head
One of the most impressive features of the new machine is the 4-way mount that holds the torch tip. This adjusts for height, flame angle (up/down), and flame distance to case. It can also rotate around a vertical axis. The mount looks like something NASA would produce for vectoring rocket thrusters.
Compared to some other annealers, Pieter’s KinetiX unit is quite compact, with a small footprint. The entire unit (less torch) would fit in a large hat-box. Pieter kept the footprint small by placing all the drive motors and gears under the carousel, rather than off to the side. Pieter optimized his machine for a single torch: “Dual torches are good on some other models to distribute the heat around the neck or to get longer exposure time on the constant-motion models. On this model the case turns in the flame so i do not see a real need for a secondary torch. However, if you want two or more torches i would be more than happy to add brackets for them.”
Basic KinetiX Annealer Will Cost $540.00
Pieter plans to put his KinetiX annealer into production: “I will be selling these units for $540 USD not including shipping, which is about $105 USD for airmail and $35 USD for surface mail. I hope to have my own website up and running soon but you can reach me on gokinetix[at]telkomsa.net in the meantime.” The $540.00 price includes the annealing machine, speed controller, power supply (100-260V) and standard wheel which up to .308-rim-diameter cartridges (including 284s). Pieter tells us: “I have tested [the standard wheel] down to .22 Hornet, but anything that sticks out above the plate (7/8″) should work fine. If you have a specific case in mind that does not fit, i can just make up a special wheel for you.” Pieter also plans to offer Magnum wheels for cases up to .338 Lapua, and Super Magnum wheels for cases up to .50 BMG.
|
