|
|
June 7th, 2016
Here’s a great gift for Father’s Day that any dad with a truck should appreciate. Forum member John Niemi crafts custom hitch covers that look like the end of a cartridge case, complete with head-stamp. Costing $75.00 (delivered), they are made out of solid brass with a stainless steel “primer”. The diameter of the brass is 4 inches and the engraved letters are about half an inch tall. The section that slides over the trailer hitch is aluminum, so you don’t have to worry about rust.
 The “headstamp” can include your favorite cartridge-maker and caliber (wildcats too!), or you can include the name of your business. John tells us: “I can engrave any text on one as long as there is enough room for it. Turn around time is usually less then a week after payment. I have sold many of these and everyone has been extremely happy with the quality and workmanship that I put into my product. These make great one-of-a-kind gifts.”
$75.00 Delivered in the USA
The current price for brass bullet hitch covers from John Niemi is $75.00 shipped anywhere in the USA. To order, send email to JohnNiemi [at] charter.net or call (503) 440-1954. John said he should be able to offer pretty quick turn-around, unless he just gets swamped this week.
Forum member Wayne (aka WAMBO) ordered a custom hitch cover from John, featuring the 30/338 Lapua Improved wildcat he calls the 300 WAMBOMAG. Wayne reports: “The hitch cover is very well made. I’m impressed with the quality. Buy with confidence.”
We’ve seen John’s craftsmanship on many of these hitches, and we can confirm that the hitches are beautifully made, and make a handsome addition to any vehicle. If you order one (or more), be sure to mention you learned about the hitch covers on AccurateShooter.com.
June 6th, 2016
Click photo for full-screen version
MidwayUSA has just introduced a new compact shooting mat that should work great for varmint hunters as well as tactical competitors. The new MidwayUSA Lightweight Tactical Shooting Mat rolls up into a very compact 15″x 8″ package that fits into a handy carry pouch. Despite its light weight and portability, this mat has some nice features: 5 millimeter-thick close-cell foam padding, four corner tie-downs, and a water resistant, non-skid bottom. The rugged, abrasion-resistant exterior is constructed of 400D PVC-coated polyester fabric on top, with 1200D PVC-coated polyester on the bottom. There is also a data card pocket.
The price is right — as an introductory special, MidwayUSA is offering this new Lightweight Tactical Shooting Mat for just $29.99. You read that right — you can purchase the mat for just $29.99, thirty bucks off the regular $59.99 price. That’s a great deal…
When not in use, the mat conveniently stores in its included MOLLE-compatible, zippered pouch. Unrolled, the mat is 69″ long and 30.25″ wide. Rolled dimensions are 15″ x 8″. The MidwayUSA Lightweight Tactical Shooting Mat is currently offered in three colors: faded olive drab, black, and coyote tan (featured above).
June 4th, 2016
The BarrelCool is an innovative, compact barrel-cooling device that also serves as an empty-chamber safety flag. A small, battery-powered fan drives cooling air through the barrel’s bore. Yes it really works — manufacturer-provided data shows that BarrelCool significantly reduces the time it takes to cool down a hot barrel. Look at the chart above to see what to expect.
In the past, folks have tried various methods to cool barrels: water flushed through the bore, CO2 tanks, even battery-operated fish pumps. BarrelCool is a simpler, less costly, and much handier solution. Priced at $34.99, this small device can definitely save you time at the range. Potentially it can save you money by extending barrel life. To see how Barrelcool works, visit BarrelCool.com. There you’ll find video demos of BarrelCool units in both bolt-action and AR-type rifles.
BarrelCool Range Reports from Forum Members
“Early adopters” of BarrelCool have been impressed so far. Forum member Comrade Terry said: “At the range, I spend a good bit of time waiting for the barrel to cool between shot strings. I fired my usual 50 rounds today, and (though it was 85° today) I was able to leave the range 30-40 minutes earlier than usual thanks to the BarrelCool. I like it!” Another Forum member, J-Rod, reports “Did some load development on my new rifle Friday. This used to take forever due to the barrel heating up outside in full sun (90° ambient). I’d say this little gem cut about two hours off my normal shooting time. I got home early and the wife was happy — what’s that worth?”
How and Why BarrelCool Was Invented
BarrelCool originated from the idea that cease-fire periods would be a great time to cool a barrel. During cease-fires, most ranges and matches require empty chamber flags in the gun so that the range officer and everyone on the firing line can see visually that the gun is in a safe condition.
BarrelCool inventor Bryan Sumoba explains the advantage of Barrelcool: “The challenge with the previous barrel-cooling methods is one would have to be present to run the device, it required additional steps such as running patches down the bore, or it gets in the way of a required empty-chamber flag. BarrelCool now allows the shooter to cool the barrel down simply and easily while having the empty-chamber flag in the firearm.”
Sumoba says BarrelCool significantly shortens the time needed to cool down a hot barrel: “In controlled testing, it took about half the time to cool the barrel from 140 degrees F to 100 degrees F (more in some cases depending on the barrel contour/length and ambient temperatures). Our customers also report significant reductions in the time it takes to cool down a hot barrel. At a recent 3×1000 F-Class match in Sacramento, one shooter fired 25 shots out of his 7mm RSAUM and got the barrel to the point where it was too hot to touch. In most cases, the barrel would still be very warm/hot by the time the next relay started. We placed BarrelCool in his firearm and within 30 minutes, the barrel was back to near-ambient temperature. Other observers mentioned that the air coming out of the muzzle with BarrelCool in the firearm felt like a mini blow dryer.”
Using three (3) CR123A batteries, a BarrelCool unit can operate for 7-10+ hours. BarrelCool fits both AR-style rifles as well as most bolt action rifles. The Hi-Viz yellow color stands out on the firing line and BarrelCool is small enough to fit in most range or gun bags. Manufactured in the USA, Barrelcool can benefit competition, precision, or recreational shooters who need to cool down their barrels more rapidly, while displaying “safe condition” on the firing line. For more information, or to order for $34.99, visit www.barrelcool.com.
June 1st, 2016
If you watch just one episode of Shooting USA TV this year, it probably should be this week’s hour-long SHOT Show Special. Tonight, June 1, 2016, you can see the full coverage of the event. Jim Scoutten’s team of gun journalists work hard every January, bringing you highlights from the gun industry’s largest trade show. Jim, son John Scoutten, and other staffers prowled the 12 miles of aisles in the Sands Convention Center in Las Vegas, visiting many of the 1,600+ exhibitors. This episode provides a “first look” at the new guns, optics, and gear introduced for 2016. Click HERE to learn more about this week’s SHOT Show episode.
Shooting USA’s SHOT Show Special will air for a full hour on Wednesday, June 1, 2016 on the Outdoor Channel. Here are the air times, but you should check your local schedule. Look for Shooting USA TV on the Outdoor Channel.
| Shooting USA Hour AIR TIMES BY TIME ZONE: |
Wednesday Night Schedule:
Eastern Time – 9:00 PM, 12:30 AM
Central Time – 8:00 PM, 11:30 PM
Mountain Time – 7:00 PM, 10:30 PM
Pacific Time – 6:00 PM, 9:30 PM |
Saturday Prime Time Schedule:
Eastern Time – 12:30 AM
Central Time – 11:30 PM
Mountain Time – 10:30 PM
Pacific Time – 9:30 PM |
Here are some of the 50+ new products featured on the SHOT Show Special:
Savage A17 XP Rifle
 |
Hornady L-N-L Iron Press
 |
Smith & Wesson M&P 15-22 Sport
 |
Sig P210 Standard/Target 9mm
 |
SnapSafe Titan Modular Safe
 |
Walther PPS M2 9mm
 |
May 26th, 2016
The Precision Rifle Series (PRS) has introduced a new, price-capped Production Class in an effort to boost participation by making competition more affordable. Under recently-issued PRS rules, Production Class rifles may cost no more than $2000.00. The rules state:
“Production Division combined rifle and scope MSRP as listed on the company’s website shall not exceed $3,000 USD, the rifle shall not exceed $2,000 USD and the optic not exceed $2,000 USD.
Production Division rifles are not permitted to be altered or improved in any way from the original factory configuration.
In an effort to prevent exorbitant costs for beginning shooters, Production Division round count will not exceed 80 rounds.”
To fit the new Production Class Rules, MasterPiece Arms (MPA) has developed the new BA Lite PCR Competition Rifle built around a Savage Model 12 short action. Designed specifically for the new PRS Production Class, MPA’s PCR Competition Rifle offers many premium features yet stays under the $2,000 Class limit. The Savage action is upgraded with a Rifle Basix 2-lb trigger, and the adjustable, modular chassis offers a bag rider, barricade stop, and even a built-in bubble level. Bipods can be attached up front to a rail, with optional spigot mount. MPA PCR Rifles come with stainless Bergara barrels, 22-26 inches in length, fitted with MPA muzzle brakes (muzzle thread is 5/8-24 TPI).
MPA BA Lite PCR Competition Rifle Specifications:
Chamberings: 6mm Creedmoor, 243 Win, 6.5 Creedmoor, 308 Win, 6.5 x 47 Lapua, 6mm x 47 Lapua
Action: Savage Model 12 Short Action
Trigger: Rifle Basix Savage Trigger Set to 2 lbs.
Barrel: Bergara 416R Stainless Premium Barrel Blank
Chassis: MPA BA Lite Chassis
Muzzle Brake: MPA High Performance Muzzle Brake
Magazine: AICS Type (10 Round Accurate/AICS Type Magazine Included)
Chassis Weight: 2.9 lbs. (Overall rifle weight depends on barrel length and contour.)
MSRP: $1,999.99
Left-Hand and Right-Hand Models in Choice of Five Cerakote Colors
The MPA BA Lite PCR Competition Rifle is available in black, burnt bronze, flat dark earth, gunmetal, and tungsten in both left- and right-handed set ups. All chassis and barrels are Cerakoted® in a multitude of colors and patterns. (Custom patterns are $150.00 extra). Barrel lengths available include 22 inches through 26 inches. The barrel twist is caliber-specific and the barrel muzzle thread is 5/8-24 TPI.
Editor’s Note: While the MPA PCR Competition rifle has nice features, it’s hard not to compare it to the Ruger Precision Rifle costing hundreds less. The latest Gen 2 Ruger Precision Rifle, with a sleeker handguard and factory muzzle brake, is available for under $1500.00 “street price”. Ruger lists a $1599.00 MSRP for the Gen 2 RPR versus $1399.00 for Gen 1 models.
May 24th, 2016
|
What was old, is new again… RCBS has just introduced an all-new balance beam scale, the RCBS M1000 Scale. RCBS claims this magnetic-dampened scale will weigh up to 1,000 Grains with +/- 0.1-grain accuracy (one-tenth of a grain is about three kernels of Varget). The new M1000 mechanical scale features a magnetic damping system for fast readings, and maintenance-free movement. A newly-designed “tip-proof” pan should ease powder loading. Notably, the M1000 scale was designed to work in both right-handed and left-handed configurations. Curtis Smith, RCBS Product Director, explains: “For those who choose mechanical scales, accuracy and reliability are top priorities. The new M1000 scale provides exactly that for both left- and right-handed users.” The scale is quite affordable — it is available now at Amazon.com for $129.59. (MSRP is $159.45.) For more information, visit www.RCBS.com. |
|
Triple Poise Operation with 1000-Grain Capacity
The scale has some interesting features, including three poises (weight index adjusters). The main poise goes to 1000 grains, while the medium poise runs up to 20 grains. The most precise small poise spans one grain in tenth of a grain increments. The rated capacity of the RCBS M1000 scale is 1000 grains.
Multiple Reference Pointers for Target Weights
The M1000 also features multiple pointers which can be used to set target weight ranges. This speeds up operations. According to the M1000 Users Manual: “[There are] three separate pointers for easy reading of over and under loads. The center Pointer is what is used when balancing the scale and establishes a ZERO Balance. The top and bottom Pointers represent approximately 1.5 grain above and below target load. The top and bottom pointers allow the user to quickly weigh loads knowing that if the beam pointer is oscillating between the top and bottom pointers the load is within +/- 1.5 grains. Having top and bottom pointers also eliminates the need to move the small poise to check powder charge variations.”
May 18th, 2016
Edgewood makes some of the best front and rear shooting bags you can buy. And the latest Edgewood rear bag is better than ever, with a new hybrid “slick material overlay”. This combines the shape retention and stability of leather ears, with slick, low-friction material where the stock rides. This “best of both worlds” solution delivers both bag stability and improved tracking. Derek Rodgers, the only man who has won BOTH the F-Open and F-TR National Championships, is using this new rear bag, and he says it’s excellent. He says his gun tracks great with the slick material on top of leather-based ears.
You’re probably familiar with Edgewood for its high-quality shooting accessories. You may not know that Edgewood also offers a full line of quality leather holsters. And we bet you didn’t know that Edgewood got its start making tack and bridles for horse riders. Here’s a short history of Edgewood Leather, a family-run business based in Albuquerque, New Mexico.
The History of Edgewood Leather
by Jack Snyder
I’ve always enjoyed working with leather and still do to this day. Something about starting with an idea and building a useful and hopefully, beautiful piece does it for me. There’s nothing like leather to stimulate my imagination. It brings out my creativity and makes me happy.
 I began doing leatherwork as a kid, 12 or 13, and the first piece I made was a pair of shoes. Got a job in a leather shop in the late ’60s and made purses and belts, wallets and sandals — many pairs of sandals. I opened a small retail shop in Estes Park, CO and made even more of the same, adding vests, halter tops, hats, mountain man gear of all sorts from skunk hats to goat fur high-top moccasins.
After a decade or so, I became restless for something new and taught myself bridle work. I discovered a niche market with English riders who were always looking for beautiful, well-fitting show bridles and over a period of about twenty years developed and produced many products for these riders — numerous types of nosebands, breastplates, martingales, girths and many different varieties of reins. At the same time I observed that for every horse and rider there were at least two dogs trotting along beside. I began making dog products which closely resembled their horse buddies bridle work. Sales were good. Leashes, leads, halters and collars showed up at dog shows around the country. My bridles were worn by many champions in every horse discipline — dressage, show ring, hunter-jumpers, and my polo gear became popular among the players. All of that was fun and I’m still proud of those products (still being made today), but it was time for a change. I sold my interest to my partner and tried to retire. Didn’t work, though.
My plan was to shoot benchrest matches, as many as I could. And I did for some time and loved every minute. I’ve made many friends among the shooters, discovering early on that these people are the most interesting, smart folks a guy could ever associate with. To the man, they’ll share what they know with you and even hand you their gun when yours malfunctions during a match, and grin and slap you on the back when you beat ‘em with it!
When I was getting started in benchrest, one aspect of the game was somewhat disappointing to me-the quality and stability of the shooting bags. It was natural with my past leather experience to make what I thought would be a better product. I cobbled up a couple of bags and went to a match in Oklahoma. All hell broke loose. Most of the shooters had to have one. By the end of the summer, I had so many orders for shooting bags, I couldn’t keep up the pace. I was improving the designs, based on the shooters telling me what worked and didn’t work. I was adding new products, experimenting with materials, processes and configurations and having a great time. Completely by accident, Edgewood Shooting Bags was born. My wife Cindy and my two kids Jackie and Aaron jumped in and we became a bag-making machine — always looking to improve and expand upon the products. Jackie’s husband Ryan joined us several years ago and together, we’ve made a pretty awesome team.
Edgewood’s New Line of Leather Holsters
Since we’re all avid shooters with many handguns among us, the next logical product to add to our catalog would be a line of high-quality leather holsters. For the last year or so, we’ve come up with what we believe to be the most comfortable, elegant holster out there. Affordably priced, these holsters are are available in many different styles and configurations, for both outside carry and concealed carry.
Latest Rear Bag Design — Leather Ears with ‘Slick Material Overlay’
Edgewood constantly strives to improve its products. Witness the new “slick material overlay” bag ears. This is a major design improvement over our regular “slick ears”. The development of the overall design all started when we noticed some shooters applying household products like talcum powder or dryer sheets to the ears of their bag in an effort to reduce friction and speed up their rifle’s return to battery. We found a material that would achieve this function without the need to raid their wife’s pantry for powders or laundry accessories and began sewing the ears up using this “microscopic glass bead impregnated” fabric. We were happy with the results. However, we soon began to realize that the slick material could have the longevity of our nylon as well as its slick properties, if we found a way to increase its thickness without causing wrinkles or inconsistencies.
First, we ended up hunting down some similar fabric with a much higher strength and thickness. It even has a fireproof backing that makes it far more durable — even if shooters aren’t planning on exposing it to temperatures higher than the Arizona desert can offer. This material was definitely superior and even more representative of the quality and durability that shooters have come to expect from products wearing the Edgewood logo. We didn’t stop there, either.
We started experimenting with a way to combine our toughest ear design, which is made from soft leather, with the slick material to create the best of both worlds. We deemed it the “slick overlay” option and many of the world’s top shooters now swear by it. There is no compromise with this ear set — shooters gain all of the advantages of the slick material, in addition to durability and consistency that exceeds even our tried and true nylon ears. Many of our original bags have been punished by shooters for over a decade and are still performing. We expect this design to last even longer.
Keeping ahead of the curve with innovations that create and help propel evolution in the sport is a signal of our commitment to retain our status into the future. Along with other new products like our second generation of concealed and open carry holsters, range bags for sighting in hunting rifles, radius front bags for AR-style rifles, camouflage color options and more — we even have a new logo for 2016. Check us out online or give us a call. We’re ready to meet the demands of shooters — from Benchrest and F-Class to concealed carry and IDPA.
Jack Snyder
President – Edgewood Shooting Bags and Gun Leather
May 17th, 2016
We like AR-style .22LR rigs for Rimfire Tactical Matches and 3-Gun cross-training. With an AR-style rimfire rifle you can train with low-cost ammunition while enjoying the same ergonomics, controls, and sighting systems found on your centerfire ARs.
Smith & Wesson has upgraded its M&P 15-22, a fun rifle that we’ve praised in the past. The new M&P 15-22 Sport MOE SL model (Magpul Original Equipment Slim Line) features a more comfortable handguard, an improved grip, and an adjustable Magpul buttstock. The dedicated .22 LR M&P rifle retains the look and features of the company’s popular M&P rifle line, with the enhanced ergonomics of Magpul furniture. Click HERE for Spec Sheet.
May 14th, 2016
There are just five more days until the NRA Annual Meeting & Exhibits kicks off in Louisville, Kentucky. If you can make it to the big event, you should go. After SHOT Show, this is the biggest event of the year for firearms fans — thousands of products will be showcased by 750+ exhibitors in a 500,000 square-foot facility. You can meet celebrities, and have fun at an on-site airgun range. The Exhibit Hall opens at 9:00 am on May 20th (Friday Morning). The Meeting kicks off with the Nat’l NRA Foundation Banquet on Thursday evening, the 19th.
 This year’s NRA convention will feature a variety of special events. The ever-popular NRA Country Jam kicks off at 6:00 pm on Friday, May 20th at Louisville’s Belvedere at Waterfront Park.
The official NRA Members Meeting will be held Saturday morning at 10:00 in Freedom Hall at the Exposition Center. NRA leaders Wayne LaPierre, Chris W. Cox, and Allan Cors with address the membership. Many other seminars will be hosted over the weekend. Purchase Event Tickets.
Admission Free for NRA Members
Entry to the exhibit hall is free for NRA members and their immediate family. Members of nationally recognized youth organizations (Scouts, 4-H, etc.) in uniform or otherwise properly identified will also be admitted free as well. Non-members may register by joining NRA on-site.
NOTE: Pre-registration has closed. You may register on-site by visiting the registration counters located in the Kentucky Exposition Center Lobby.
May 13th, 2016
The wait is over… Creedmoor Sports is now producing some of the best .223 Rem target ammo you can buy. Three “match-grade” types are offered with Sierra bullets and NEW Lake City cartridge brass. If you shoot Service Rifle, you may find that this new Creedmoor ammo rivals good handloads — and that’s quite an achievement. Creedmoor General Manager Dennis DeMille, a past National Service Rifle Champion, states: “As a National Rifle Champion and having fired probably a Gazillion rounds down range (mostly hand loads), I would not hesitate to compete with this ammunition on a National Level!”
Creedmoor currently offers .223 Rem competition ammo loaded with three of the most popular projectiles: 69 grain Sierra TMK (Tipped MatchKing), the 77 grain Sierra TMK, and the 77 grain Sierra BTHP. All three ammo types are loaded in Creedmoor’s new production facility using brand new Lake City Brass. As with all Creedmoor Ammo, each lot is pressure tested and velocity tested prior to every round being hand-inspected and packaged. That gives you confidence that this ammo is consistent lot to lot. Given the quality of this ammo, it is VERY affordable, starting at $34.75 per 50-round box. That works out to $0.69 per round. At that price, when you consider hand-loading, you have to ask yourself “what’s your time worth”? Would that time be better spend practicing?
Quantity Discounts and FREE Shipping on Large Orders
Creedmoor offers quantity discounts on the .223 Rem ammo: “Order Five (5) or more boxes of any one round to get your first price break. Order Ten (10) boxes of ANY combination of Creedmoor Ammo (Rifle or Pistol, Mix and Match) you get free shipping.”
|
