The big news at Nightforce’s SHOT Show booth was a new First Focal Plane (FFP) ATACR with a five times zoom range. The new 7-35x56mm ATACR offers tactical and long range shooters the ability to go from a wide field of view at seven power, all the way up to very high 35X magnification. That makes this one scope that can truly “do it all” — from short-range moving targets to 1000 yards and beyond.
With a fat 34mm main tube, the 39.3 ounce 7-35x56mm ATACR offers 60 MOA of windage adjustment and a whopping 100 MOA of total elevation adjustment. The elevation turret includes a ZeroStop. Nightforce notes: “With parallax adjustment down to 10 meters and 100 MOA of elevation travel, precision is attainable from short range distances to … extreme long range[.] This riflescope offers an incredible field of view across the entire magnification range[.].”
The new 7-35X ATACR is offered with either 1/4 MOA or 0.1 Mil click values and three reticle choices: Mil-R F1, MOAR F1, TReMoR3 F1. The illuminated MIL-R and MOAR reticles are shown below. Note that the MOAR offers 80 MOA of hold-over below center.
Digital editions of the four issues of SHOT Daily, the magazine printed each day of the SHOT Show, are available free in convenient Web eZine formats. Three web issues are available right now, and the fourth issue will be released later today (Friday, 1/20/17). You’ll find many product features plus articles that can benefit shooting club directors and range managers. Definitely check out the Day One Issue’s extensive coverage of new-for-2017 firearms. SHOT Daily is produced for NSSF by Bonnier Corp., publishers of Outdoor Life, Field & Stream, and many other magazines.
Highlights Day 1: New Savage MSR (AR type) rifles, New Firearm Roundup, Exhibitors.
Highlights Day 2: New Products Reports, New Optics, New Ammunition.
Highlights Day 3: New Products Reports, Savage Rimfire, Knives, Accessories
Sierra Bullets has just released very complete load data for the popular 6.5 Creedmoor cartridge. This medium-sized cartridge has become one of the most popular chamberings for tactical and PRS shooters. The 6.5 Creedmoor combines excellent accuracy, good mag-feeding, good barrel life, moderate recoil, and reasonable component cost. That’s why this cartridge has caught on quickly.
Developed in 2007 by Dennis DeMille and Dave Emary, the 6.5 Creedmoor is a shortened and improved 30 TC cartridge case that was inspired by the .308 Winchester design. This short action design was created to maximize case capacity and a wide range of loading lengths, while still fitting in standard short action magazines. With the correct twist barrel, the versatile 6.5 Creedmoor can take advantage of the wide range of bullet weights available in 6.5 mm (i.e. .264 caliber). Reloaders should keep in mind that the 6.5 Creedmoor works best with medium to medium-slow powders such as H4350, Varget, Win 760, and RE-17. The light recoil and adaptability of the efficient 6.5 Creedmoor cartridge has already proven itself in high power, precision rifle series and benchrest competitions. Couple that with respectable barrel life and its intrinsic accuracy potential and you have a recipe for success which should insure its legacy for decades to come.
Here are three tables from the Sierra Bullets Reloading Manual (5th Edition). IMPORTANT — This is just a sample!! Sierra has load data for many other 6.5mm bullet types, including FB, Spitzer, SBT, HPBT, and Tipped MK from 85 grains to 142 grains. To view ALL 6.5 Creedmoor DATA, CLICK HERE.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
You are looking at $20,100 of Competition Rifles here. (Click Image for full-screen version.)
Don’t inquire about the price of a Bleiker competition rifle. As the expression goes, “If you have to ask, you can’t afford it”. At the Pardini USA booth at SHOT Show we saw a pair of bodacious black beauties — two “full-race” Bleikers, one a smallbore match rifle (.22 LR) and the other a 300m position rifle chambered in 6mmBR Norma. The combined price for the two rifles was a jaw-dropping $20,100.00. Yep, over $20K for the two. The 6mmBR rig was $10,200 while the smallbore rifle was $9,900.00.
Bleikers command such high prices because they win. At recent ISSF 300m and Smallbore Championships, Bleikers have been used by many of the medal winners. A gun is worth $10K if it can really put you on the podium or, better yet, deliver a world championship.
Take a look at this slick feature on the 300m gun. The adjustable cheek-pad automatically tilts up (for clearance) when you retract the bolt. That’s clever Swiss Engineering.
SEB Rests, producers of the SEB NEO rest and innovative JoyPod bipod, have released an all-new, portable tripod-base Co-Axial rest, the SEB Mini. This is a very impressive bit of engineering by Sebastian Lambang. Weighing about 12 pounds, the SEB Mini is easy to transport yet stable and versatile in the field. A joystick lever-arm allows the shooter to move the front head (with sandbag) in any direction with a smooth continuous motion. The Mini delivers about 30 MOA vertical travel by 45 MOA horizontal travel with the same smooth, fluid feel as the NEO rest.
The Mini is now in full production and testers in the USA and UK have returned very positive test results. The Mini combines the smooth controls of a full-size Co-Axial front rest, yet is much easier to transport. Based on reports from testers Dan Bramley and Vince Bottomley, we predict the Mini will become extremely popular with F-Open competitors as well as all shooters currently using pedestal-style front rests for recreational shooting or load testing. Price for the complete unit (with front bag) is $675.00 shipped in the lower 48 states.
Inventor Seb Lambang told us his design goals in creating the Mini, which was named after “Mini” his pet Chihuahua: “The Mini rest is designed to be simple, compact, and light. It has has equal smoothness and MOA travel as the larger NEO rest.”
The new SEB Mini is a joystick (coaxial) rest with a height-adjustable single center column fitted on a base with three foldable legs. The top can be rotated 360 degrees and locked securely by the two adjustable locking levers. The lowest setting is about 6.25″, the highest is just over 10″. The SEB Mini can be used for F-Class shooting, bench rest shooting, varmint shooting, or load development. The joystick handle is compatible with the SEB NEOs and MAX co-axial rests. The Mini ships complete with a one-piece front sandbag in the buyer’s choice of width.
Key Features:
12-lb carry weight
Large Footprint, yet very portable
Legs adjust with individual thumbwheels
Mariner Wheel offers 40mm of Vertical Adjustment
Measures 5″ x 7″ x 16.25″ when folded
Lowest height approx 6.25″, highest 10″ or more
Head can be rotated independent of base assembly (to assist alignment)
Head unit can be purchased separately and fitted to different tripod base.
SEB Mini REVIEW by Dan Bramley:
Sebastian Lambang, the creator of the ever-popular SEB NEO and SEB MAX co-axial front rest, was kind enough to send me a SEB Mini for review. The point of this review is to give a shooter’s perspective. I will just say that the adjustments and movements are plenty sufficient to shoot in F-Class in High Power and rimfire.
Positives: The SEB Mini has all of the fine craftsmanship of the NEO. The fit and finish is excellent. This thing is SOLID! When the screws are all locked down it does not budge. The engineering is excellent and well thought-out. It comes in at 12.0 lbs with sand in bag and ready to shoot. To me this weight appears to be optimal, light enough to travel with but heavy enough to be stable.
Shootability: For me shooting off the SEB Mini was no different than shooting off the SEB NEO. The fluid motion of the coaxial top and stability were consistant with the NEO. Set-up was quick and the ability to set it down in reasonably close alignment and release the clamps on the Acme screw to allow perfect rest alignment was a nice feature. Course adjustment was quick with the large mariner wheel and the joystick has the same size collet as the NEO for those who may have made custom joysticks.
I shot my rimfire off of it at first, on concrete, and it didn’t move at all. No surprise there. So I figured I would shoot my biggest rifle off of it in an attempt to punish this little “Mini”.
Conclusion: This thing is just awesome! It folds up quite compact and would likely fit in a bag, instead of a pelican case, for travel. I have often thought of shooting my open rifle off of a JoyPod when traveling by air but that requires a rail etc. for mounting. I would not hesitate to shoot off this Mini in competition.
Vince Bottomley Tests the New Seb Mini
Our friend Vince Bottomley acquired a Seb Mini and had a chance to test it out in competition at the Diggle Range in the UK. Vince was very impressed with the Mini, which he says is very solid and smooth running, yet easy to set up. Vince used his new Mini to win a match, proving the unit is “competition-ready”: “When you do a range test like this, it’s always great if you can post a decent result and I’m pleased to be able to report that I won Open Class….”
Vince liked the smooth operation and broad windage/elevation adjustment range offered by the Mini:
“The joystick offers plenty of movement at 600 yards so staying on target throughout the shoot was no problem and, more importantly, I could swing onto my competitors’ targets as a final wind-check. Each of the three legs has its own ‘angle’ adjustment — enabling you to obtain a steady, level set-up on the most uneven of firing-points. The center pedestal can be raised and lowered using a mariner wheel and of course, there is the familiar joystick adjustment.”
Vince said it was easy to level the Mini and align the head with his rear bag: “Drop it on the point, then level the bubble using the leg-adjuster thumb-screws (photo right). Because the screws are at the pivot point they move the legs very quickly — as opposed to screwing the feet to level a NEO. Wind up the mariner wheel to get on target, nip up the locking levers and the rest is perfectly aligned, thanks to the swiveling head.”
Vince also liked the fact that the Mini is significantly lighter than a SEB NEO rest, but still stable because it has a wide footprint. See the comparison photo below.
Vince tells us that the Mini is truly easy to transport: “I’ve fixed a strap to my Mini so, by slinging it over my shoulder, I can carry rifle, mat and back-bag with ease — so that’s a big ‘plus’ right off.”
Conclusion: “The SEB Mini lived up to expectations and ticked all the boxes –lighter to carry, easy to set up, plenty of adjustment, very stable. Thank you Seb… You have a winner here!” — Vince Bottomley
Product Information from SEB Rests:
The complete SEB Mini includes Head unit, foldable legs, fore-end stop, aluminum bag bracket (with bubble level), joystick, leveling screws, and front bag. The base features three foldable legs, each of which can be adjusted/tilted for elevation via a thumb screw. We recommend setting the base/legs in the highest position initially, then lowering each leg via the thumb screws.
The Mini is offered in three (3) configurations. The complete Mini with base, foldable legs, and carry case is $800.00, including shipping to the lower 48 States. For considerable less there are two legless options. Option 1 is the Mini without the foldable legs. This could work for customers who may wish to fit the top to a solid base plate. Option 2 includes just the head unit with center post, mariner wheel and needle thrust bearing. Option 2 could suit customers who already have a Bald Eagle or Caldwell base with 1″ diameter center hole/post. However some machining may be required. Call Ernie Bishop at 307-257-7431 for current option prices and availability.
Net weight approx. 5.5 kilograms (12 lbs)
Top can be rotated 360° and locked securely in any position
Measures 5″ x 7″ x 16.25″ when folded
Joystick is compatible with SEB NEO, MAX and JoyPod
Lowest height approx 6.25″, highest 10″ or more
Foldable legs can be individually adjusted up/down with thumb screws
Extra wide footprint, leveling screws are about 17 inches apart
Ambidextrous, and can be used either “Up for Up” or “Up for Down”
Made from 6061 and 7075 aircraft grade aluminum
Head has removable fore-end stop
Standard fold-able base for traveling with tiltable legs
Comes with standard one-piece 3″-wide front bag 3″ wide (Optional bags*: 2-1/4″, wide sporter (for 1.5″-2″ stock), narrow sporter (for 1″-1.5″ stock)
For more information, visit SEBRests.com. The USA dealer is Ernie Bishop:
We may see a big change in how sound suppressors are regulated in the future, if new legislation from the Congressional Sportsmen’s Caucus (CSC) becomes law. On January 10, 2017, Rep. Jeff Duncan (SC) and Rep. John “Judge” Carter (TX) introduced H.R. 367, the Hearing Protection Act (HPA). This law would remove suppressors (aka “moderators”) from National Firearms Act (NFA) control, eliminating requirements of extensive paperwork, and purchase of a tax stamp. If the Hearing Protection Act becomes law, suppressors could be purchased through an FFL (after a NICS background check), just like a normal, non-NFA firearm. This would make suppressors more affordable in the 42 states where suppressors are legal to own. What’s more, the new legislation includes a provision to refund the $200 transfer tax to applicants who purchased a suppressor after Oct. 22, 2015.
Suppressors function by trapping the expanding gasses at the muzzle, allowing them to slowly cool in a baffled chamber. On average, suppressors reduce the noise of a gunshot by 20-35 decibels (dB), roughly the same sound reduction as earplugs or earmuffs. In addition to hearing protection, suppressors also mitigate noise complaints from those who live near shooting ranges.
“Many gun owners and sportsmen suffer severe hearing loss after years of shooting, and yet the tool necessary to reduce such loss is onerously regulated and taxed. It doesn’t make any sense,” said Chris W. Cox, executive director, NRA-ILA. “The Duncan-Carter Hearing Protection Act would allow people easier access to suppressors, which would help them to better protect their hearing.”
Guns.com explained how the Hearing Protection Act will change current law: “Since 1934, the federal government has treated devices designed to muffle or suppress the report of firearms as Title II devices that required registration under the National Firearms Registration and Transfer Record and mandated transfers that included a $200 tax stamp. The Duncan-Carter bill would repeal this requirement and treat suppressors as firearms — which would allow them to be transferred through any regular federal firearms license holders to anyone not prohibited from possessing them after the buyer passes an FBI instant background check.”
This video discusses an earlier version of the Hearing Protection Act, H.R. 3799:
“For the past five years, the Congressional Sportsmen’s Foundation (CSF) has worked alongside the state legislative sportsmen’s caucuses in the National Assembly of Sportsmen’s Caucuses, the American Suppressor Association, and many other partners at the state level to normalize the use of suppressors throughout the nation,” said CSF President Jeff Crane. A similar bill was introduced last year by Rep. Matt Salmon (AZ) but that legislation never made it out of committee.
If you have purchased a suppressor in the last year, the HPA could put money back in your pocket. As drafted, the HPA also includes a provision to refund the $200 transfer tax to applicants who purchased a suppressor after October 22, 2015.
Headed to SHOT Show in ten days? Then you should download the FREE SHOT Show Mobile App. Available for all mobile devices, this App really makes it easier to plan your SHOT Show schedule, and navigate the floor of the Sands Convention Center. The 2017 SHOT Show Mobile App is now available for download on Apple, Android, and Windows smartphones and devices. Apple users will find the app in the App Store, Android users will find their version in the Google Play Store. Windows users can access via the WEB Dashboard. Learn more about the SHOT Show 2017 App at SHOTmobile.com.
Handy Interactive Map
The App includes an interactive map that can direct you from your current location to your next destination. Arrange your meetings with a handy scheduling calendar. And you can search for any SHOT exhibitor by name or product category. In addition, the App lists major show events as well as important new products.
The Free SHOT Show App lets you do some very cool things with your smartphone. You can contact exhibitors directly through the App to request appointments or callbacks. You can take notes while visiting a vendor’s booth or attending a seminar. Of course you can schedule your agenda, and see an entire day’s events in a glance. But perhaps the best function of all is the “Smart Route”. This allows you to create the most efficient point to point route from one booth location to another.
Berger Bullets is becoming part of the Nammo Group, joining Lapua, Vihtavuori, and SK Ammo. This is big news, as it combines one of America’s leading bullet-makers with a major global enterprise that produces superior loaded ammunition, powder, bullets, and brass. This is potentially a boon for shooters as Nammo’s resources will help Berger increase production capacity, expand its line of products (including loaded ammunition), develop new bullet types, and invest in new, advanced machinery that should increase output and efficiency. In addition, we do expect to see new lines of loaded ammo combining Lapua brass with Berger match bullets. That combo will be tough to beat. Overall, this is a very positive development for Berger which will be able to call upon Nammo’s engineering expertise and advanced production technologies. It’s also a great thing for shooters, who can expect improved availability of the most popular Berger projectiles.
Berger Will Be Leaving California
As part of the acquisition of Berger Bullets by the Nammo Group, Berger plans to relocate its operations, moving its factory from the current Fullerton, California location. Berger will definitely be leaving California in the future.
Eric Stecker, Berger’s President, says the exact timing of the move has not yet been set, nor has the location been chosen. Arizona is high on the list of potential sites, but Berger is considering other states as well. Once the new factory location is determined, Eric says he expects the move to be completed “by December 2018 at the latest”.
In this exclusive AccurateShooter.com interview, Berger President Eric Stecker talks about Nammo’s acquisition of Berger Bullets and explains how that will bring about important positive changes, including increased production capability.
Notice from Berger Bullets
We take great pride and tremendous pleasure in announcing that Berger Bullets has joined forces with the Nammo Group. This Norwegian/Finnish corporation control many premium brands including Lapua (Brass, Bullets, Ammo), Vihtavuori Powder, and SK Rimfire Ammunition.
The joining of Berger Bullets with these world renowned, premium brands ushers in a new era of quality, performance and product availability for the discerning shooter. Today, under the Nammo Group ownership, we join three other companies that share a strong passion and commitment to precision shooting performance. We are very excited to join forces with these premium quality brands, which are committed to precision and quality.
Nammo Resources Will Help Berger Grow
The Nammo Group brings to Berger Bullets a level of support that is rivaled by few and bested by none. Nammo will support us in many areas including production capability expansion, advanced engineering, innovative product development, and the opportunity to share technology between all of these top quality brands.
Our immediate goal is to significantly improve the availability of Berger products. Throughout our history the demand for Berger Bullets has exceeded our capacity even as we’ve grown our output capabilities numerous multiples over the last few decades. Our first obligation to our customers is to improve the availability while we remain committed to our highest level of quality in the industry. Much of what has made Berger Bullets successful will remain unchanged. Bryan Litz is developing more great bullets for Berger and our technicians will still be answering your emails and calls.
Our website will remain at www.BergerBullets.com and all methods of contacts will remain the same for now. As we run across any changes, we’ll make sure we keep you updated on our website and through emails. So please, keep your information current on your email subscription and we promise to keep you posted.
The Nammo Group, www.Nammo.com, supplies high performance products to the aerospace & defense industry. Its core businesses are military and commercial ammunition; shoulder-fired systems; rocket motors; and demilitarization services. Nammo has 2,100 employees located in 12 countries.
We were impressed when we first saw the new MEC Marksman press. Created by the makers of the popular MEC shotshell reloading systems, the new Marksman combines a sturdy cast-iron frame with a modern open-front design. With a $225.00 MSRP it is more expensive than an RCBS Rock Chucker, but it offers some distinct advantages — such as the open front plus a floating shell-holder system.
Our friend Gavin Gear got his hands on a MEC Marksman press and put it through its paces. He came away impressed with the product, saying it delivers excellent performance, and has many impressive features. Gavin tells us: “Cast iron tools and machines are a lifetime investment. The made-in-USA MEC Marksman features ductile cast-iron construction, an open-front frame design for easy cartridge access, a new floating shell-holder design with a unique retention system, and ambidextrous handle setup.”
Gavin liked the Marksman’s system for holding spent primers. A tray sits behind the ram to catch spent primers exiting from a hole near the bottom of the ram. This is more foolproof than the plastic primer cups on some other single-stage presses. Expect less spent primer “spillage”.
The Marksman is sold as a stand-alone unit. However MEC also offers a very nice steel mount/riser for the Marksman. Gavin tested the Marksman with this riser, and he says it was sturdy and well-built. Gavin liked the riser. He said that elevating the Markman press up above the benchtop made it easier to handle cases and to operate the handle. You also get extra left- and right-side die-holders.
Kelly McMillan, CEO of McMillan Fiberglass Stocks, is a featured guest on Gun Freedom Radio this week. In this episode, streamed live via SoundCloud, you can hear Kelly’s take on a number of topics, including how banks discriminate against firearms businesses, new developments in the gun industry, the impact of the November election, and how to bring new shooters into the sport.
Kelly’s interview starts at the three-minute mark of GunFreedomRadio EP71 Hour 2: Better, Stronger, Faster. Kelly notes: “The show is called Gun Freedom Radio, and host Cheryl Todd is a tremendous activist for Second Amendment issues and gun ownership. You can listen to the show with the link below. I am at the start of the second hour if you just want to listen to that portion.”
Guests: Kelly McMillan, CEO of McMillan Fiberglass Stocks, located in Phoenix Arizona. If you hunt, or compete in shooting sports, you know the McMillan name has been synonymous with Top Tier quality and design. This is a family business, an American Dream success story.
NEW Kelly McMillan Voice of America Radio Show
Starting new week, January 13, 2017, Kelly McMillan will be hosting his very own Voice of America Radio show, Taking Stock with Kelly McMillan. Tune in on Friday, January 13th, 11:00 am Phoenix time on the Voice of America Sports Channel.
Kelly encourages listeners to submit topics for the show, or submit questions you’d like to have answered by Kelly. Submit questions/comments via McMillan’s Facebook page.
Developed in 2007 by Dennis DeMille and Dave Emary, the 6.5 Creedmoor is a shortened and improved 30 TC cartridge case that was inspired by the .308 Winchester design. This short action design was created to maximize case capacity and a wide range of loading lengths, while still fitting in standard short action magazines. With the correct twist barrel, the versatile 6.5 Creedmoor can take advantage of the wide range of bullet weights available in 6.5 mm (i.e. .264 caliber). Reloaders should keep in mind that the 6.5 Creedmoor works best with medium to medium-slow powders such as H4350, Varget, Win 760, and RE-17. The light recoil and adaptability of the efficient 6.5 Creedmoor cartridge has already proven itself in high power, precision rifle series and benchrest competitions. Couple that with respectable barrel life and its intrinsic accuracy potential and you have a recipe for success which should insure its legacy for decades to come.
“The joystick offers plenty of movement at 600 yards so staying on target throughout the shoot was no problem and, more importantly, I could swing onto my competitors’ targets as a final wind-check. Each of the three legs has its own ‘angle’ adjustment — enabling you to obtain a steady, level set-up on the most uneven of firing-points. The center pedestal can be raised and lowered using a mariner wheel and of course, there is the familiar joystick adjustment.”
Berger Will Be Leaving California
