|
|
August 30th, 2009
Many reloaders are now using precision digital scales that can measure down to a single kernel of powder. These scales, such as the Denver Instrument MXX-123, are remarkable measuring systems, but you can’t expect them to perform optimally with inconsistent electrical output from a wall socket. We’ve seen the line voltage in some houses vary from 95 to 160 volts. That kind of fluctuation can damage sensitive electronics. A line conditioner can help you get the most from your digital scales and electronic powder dispensers. The line conditioner takes the “juice” from the outlet and actively corrects the voltage to provide a constant 120 volts AC to your machines.
Forum member Danny Reever explains: “We have talked before about the need for surge protection and line conditioning for sensitive electronic equipment like scales and powder dispensers. However the price of said equipment is perhaps a turn-off for a lot of guys.”
Thanks to Danny, now our readers can afford a heavy-duty, high-performance line conditioner/surge protector. Reever has found a quality line conditioner from APC, a well-known manufacturer, at a bargain price — Just $99.99. The APC H10, 1000VA unit is rated for 1000 Watts (continuous). The APC device automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. The APC H10 also provides noise filtering and industrial-grade surge protection. Selling elsewhere for $275.00, the APC H10 1000VA is now available for just $99.99 from Tiger Direct.
CLICK HERE for $99.99 APC Line Conditioner (on Sale for Limited Time).
Danny tells us: “This is a real deal for 4900 joules surge protection. The unit weighs a hefty 16.1 pounds and measures 17″ wide X 9.5″ deep. I received mine yesterday and all I can say is $99.99 buys you one nice piece of equipment. It’s built like a tank for worry free and better component performance.”
August 11th, 2009
Do you frequently need to trim lots of cases, but can’t afford a powered trimmer such as the $280.00 Gracie machine? For manual trimming we like the L.E. Wilson units, and now there’s an upgrade that promises to increase the efficiency of your Wilson trimmer.
Sinclair Int’l has introduced a new Carbide Cutter Upgrade Kit that installs in place of a standard Wilson case trimmer cutter and crank handle. Very hard and ultra-sharp, the carbide cutter cuts quickly on contact without grabbing and leaves a nicely finished, square case mouth that is ready for deburring. With the carbide tip and larger, more comfortable handle, you should be able to trim cases more quickly, with less effort. The carbide cutter should also hold its edge longer than regular tool-steel cutter tips. The upgrade kit (item 05-4600) costs $69.95 and works with all Wilson case trimmer models (excluding 50 BMG).
August 6th, 2009
Sinclair Int’l has introduced two important new reloading products. Both are items that reloaders have requested for quite some time. Sinclair listened and now offers: 1) a precision large (.081″) flash hole reamer; and 2) a neck-turning tool for large cartridges such as the 50 BMG.
Large Flash-Hole Reamer
Sinclair has released a new, .081″-spec “outside-in” Flash Hole Reamer (item 07-3081) designed to designed to uniform standard flash holes to exactly .081 inch. This 3-piece tool features all stainless steel construction, a double-ended reamer guide for both large and small primer pockets, a knurled handle for easy turning, and a straight-fluted .081 inch reamer. With this tool you can remove burrs or obstructions in the flash hole and ensure that all your flash holes are the same size. NOTE — this tool works for both small primer pockets AND large primer pockets, for cartridges with .080″ nominal diameter flash holes. The new 07-3081 tool costs $37.50.
For quite some time, Sinclair Int’l has sold a similar device for small (PPC and BR-size) flash holes. Like the new 07-3081 unit for large flash holes, the 07-3000 Reamer for small flash holes works from the outside, so it can index off the primer pocket. It reams to .0625″, and also costs $37.50. The standard dimension for Lapua 220 Russian and 6mmBR flash holes is 1.5mm or .0590″. This tool will permit standard-size decapping rods with .0625″ tips to work without binding. However, note that both Forster and Redding normally supply .057″ decapping pins with their PPC and BR dies. So, it is NOT necessary to ream your Lapua BR/PPC flashholes, unless you prefer to do so for uniformity. It IS, however, a good idea to check BR/PPC flash holes for burrs before loading the first time.
NOTE: If you purchase either the 07-3081 or 07-3000 Sinclair Flash Hole Reamer tools, we recommend you mic the cutter tip before you process a bunch of cases. Sometimes a tip comes through that is oversize. This will ream the flash holes larger than you may intend.
Large Caliber (35-50) Neck Turning Tool
Jumbo rifle cartridges, such as the 408 Chey Tac and 50 BMG, are becoming more popular with precision shooters, and Sinclair’s customers have asked for a neck-turning tool which will handle the large calibers. Sinclair’s new NT-5000 Neck Turning Tool will work for cartridges from 35 caliber all the way up to 50 cal, including the 50 BMG. This new tool uses the same smooth, cutter adjustment system as Sinclair’s NT-1000 Neck Turner, but a special oversize case-holder is furnished with each NT-5000 tool. Special large-caliber Expander Dies, and large-caliber turning and expander mandrels are available individually or as part of a Large Caliber Neck Turning Tool Kit.
August 3rd, 2009
The August issue of Target Shooter, the excellent UK-based webzine, is now available FREE online. As usual, this edition is chock full of interesting feature articles written “by shooters, for shooters”. You can either read the monthly e-magazine online, OR you can now download the entire August issue to your computer. This lets you peruse multiple articles at your leisure. (For readers with a slow web connection, reading offline may be more convenient, once you’ve downloaded the file.)
 Among the featured articles this month are an authoritative section on rifle maintenance and scope-mounting by Vince Bottomley (p. 13), a user’s guide to the Redding T7 press by Laurie Holland (p. 55), and an excellent guide to Rimfire Ammo selection and sorting by Carl Boswell (p. 40). If you follow Carl’s procedures (including the visual inspections shown at right), you’ll experience fewer unexplained “flyers” — we can guarantee that.
Complete F-Class Worlds Report
Amazingly, Target Shooter’s August issue contains a detailed, 4-page report on the 2009 F-Class World Championships which concluded just a few days ago in England. You’ll enjoy the reports from the field and interviews with top F-Classers from around the world. In addition to the match report, the August Target Shooter profiles Britain’s Gary Costello, the winner of the Individual World F-Class Championship.
Gary’s rifle was built by American gunsmith Alan Warner and is chambered as a 7mm-270 WSM. (The 270 case is used because it has a slightly longer neck and slightly less capacity). The action is an aluminium Stolle Panda with RBLP configuration. The scope is a March 10-60X mounted in Kelbly rings. The stock is an Alex Sitman Master Class laminated long-range thumbhole model. Sadly, the handsome gray/blue stock broke at the thumb-hole during shipping from the USA. However, Pet Walker of Walker Customer Rifles in West Yorkshire restored the stock to better than new condition, providing Gary with a beautiful rig that carried him to victory.
August 3rd, 2009
We regularly visit vendor websites looking for good deals. Here are a pair of attractive bargains we found at Midsouth Shooters Supply.
The RCBS ChargeMaster 1500 Combo (with scale and dispenser) is now on sale for just $299.99, item # 044-98923. This remains our top-rated electronic powder dispenser system. You can watch one in action below. This video, created by a shooter in Norway, shows a Chargemaster dispensing Vihtavuori N140 powder. Using a Casio EX-F1 camera, the video was recorded at a high frame rate — up to 1200 frames per second. This allows “Slow-Motion” playback. At the end of the video you can watch the charge being thrown in normal time. Note how it slows down to trickle the last few tenths of a grain.
 Midsouth also has the Caldwell Rock BR Competition front rest on sale for just $149.99, item 094-440907.
While many “Rock” owners end up replacing the front bag, this unit is a surprisingly good rest for the money. With a 15.5-lb cast-iron “slingshot” base similar to the Bald Eagle design, the Caldwell Rock is very stable. The captain’s wheel works fine for elevation adjustments. Windage adjustment is less than ideal, as a threaded shaft rotates the whole head to adjust windage, rather than sliding the head back and forth in a straight line. At the extremes of adjustment, that can cause some binding, but most of the time it works just fine. For Varminters this may be all the rest you need.
July 21st, 2009
Grant, one of our Forum members from New Zealand, asked if there was a universal shell-holder that could hold cartridges securely for neck-turning, trimming, and case prep. He complained that the screwdriver-type case holder he was using didn’t center easily, was hard to tighten, and the case sometimes came loose during rotation. Another forum member agreed that he has experienced the same problems using a screwdriver-type case-holder.
This editor has found that a K&M screwdriver-type case holder CAN work securely if you tighten the locking mechanism tightly with the supplied wrench. But then you need the wrench again to get the case OUT. We were interested to see if there was a better solution that held the case securely, yet was easy to lock and unlock without tools.
Forum member Gunamonth provided a solution: “I use a Lee Zip Trim three-jaw case holder. With a little practice it centers the case quite nicely and holds just about anything. Chuck it in a cordless drill and have at it. It is much better than either the K&M or Sinclair [case-holder] in my opinion and the Zip Trim jaw is a lot cheaper (about $12.00). To use with power, you also need the Zip Trim three-jaw spindle, which is another $2.00.”
July 15th, 2009
 On Monday, we reported that Powder Valley, Inc. would be receiving a very large shipment of Wolf Primers today, July 15th. In addition, Wideners.com has already received a big shipment of Wolf Primers on 7/14. You can now place orders online with Wideners, but they caution that there will be shipping delays of up to one week. Wideners has Small Rifle Magnum primers in stock for $29.00/1000 and the Large Rifle (Regular) and Large Rifle Magnum in stock for $29.50/1000. NOTE: for the BR and PPC cases we recommend the Small Rifle Magnum primers. Regular Wolf Small Rifle primers have soft cups.
CLICK HERE to order Wolf Primers from Wideners.com.
July 11th, 2009
Having a quality funnel can help you get a carefully-measured powder charge in your cases, with no spillage, every time. If you’ve messed around with cheap plastic funnels you know that they can rock on the case mouth. Also, if the fit isn’t good, some kernels can end up on your bench, instead of inside the case.
Thankfully, precision, caliber-specific metal funnels are available to reloaders for about $10-11. Satern Custom Machining funnels feature an aluminum top with a caliber-specific, machined brass base/neck. Dick Saunders makes a simliar, turned-aluminum funnel sized for particular calibers. Both these metal funnels make reloading easier (and they are ideal for blackpowder loading because they do not give off static electricity). As Forum member Wes notes, with a fitted metal funnel: “the possibility of the funnel sliding to the side, and spilling powder all over the place is drastically reduced.”
Satern Aluminum/Brass Funnels
Steve Satern crafts rugged aluminum funnels with brass ends. The caliber-specific sizes offer a snug fit that keeps the funnel tight on the case neck while the powder is flowing. Forum member Danny Reever reports: “If you are tired of the generic ‘fits all’ funnels falling over and powder spraying every where, try one of the Satern funnels. Sinclair Int’l sells them and they are top notch.” SMike308 adds: “I have retired my plastic funnels after buying my first Satern funnel. I now have one for each different caliber that I load for. I especially like that the Satern has the brass weight at the bottom, which adds stability to the funnel.”
Satern funnels are sold by MidwayUSA (6mm $11.29), Satern Machining (6mm $10.49), and Sinclair International (Item 11-9XX, 6mm $11.95). Satern Machining also offers two types of universal funnels, 22-30 caliber and 30-50 caliber.
Saunders Aluminum Funnels
Some of our Forum members prefer the turned aluminum funnels made by Dick Saunders.
These are sold by Russ Haydon’s Shooters Supply for $9.95 each. Specify .17, .20, .22, 6mm, 6.5mm, .30 caliber or “all-purpose”. If you have questions, you can contact contact Saunders directly:
Dick Saunders
145 Delphi Rd.
Manchester, IA 52057
563-927-4026
July 3rd, 2009
Dateline: July 3, 2009, 2:00 pm Pacific Time
IMPORTANT NOTICE: Bruno Shooters Supply has just received a substantial shipment of one-thousand-count boxes of Federal 205M Small Rifle Match primers. These are available for immediate delivery. Price is $49.95 per 1000 primers. There is a limit of 10,000 primers (10 boxes) per customer. The price does NOT include shipping and hazmat fee. To order these primers, call Amy Bruno at 1-800-455-0350, or (623) 587-7641, or log on to www.Brunoshooters.com.
June 18th, 2009
 DATELINE: June 18, 10:40 am Pacific Time
Here is an important product update. Sinclair International received a shipment of Sellier & Bellot rifle primers on June 15. These are good non-corrosive boxer primers made by a respected Czech munitions-maker. As of June 18, 10:30 am Pacific time, Sinclair has the following quantities of Sellier & Bellot rifle primers in stock:
S&B Sm Rifle Primers (item 25-8000): $33.60 per 1,000-ct box — 165 boxes in stock.
6/22/09 UPDATE: Sm Rifle SOLD OUT
S&B Lg Rifle Primers (item 25-8100): $36.40 per 1,000-ct box — 455 boxes in stock.
6/22/09 UPDATE: 150 boxes Lg Rifle remaining
Sinclair tells us: “The primers are leaving fast so if you need large or small rifle primers or know someone who does we have some at the moment. Visit our website at Sinclairintl.com to check availability or call 1-800-717-8211. We have more large rifle primers than small rifle primers. Please limit yourself to 5,000 primers since many of your fellow shooters are without any primers at the present time.”
|
