At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. March Optics — Retirement Sale, 30% Off All Scopes in Stock
March Optics delivers some of the most advanced (and unique) optics technology on the planet. But those top-of-the-line March scopes were always a big investment. But now, you can get superb, ultra-premium March scopes for 30% Off. Shiraz Balolia, President of March Optics USA, has decided to stop retailing optics. As a result, March scopes are now being discounted 30% — that’s a huge savings. This sale pricing applies to ALL March scopes, limited to stock in hand. Here are some of the deals:
1. Genesis Extreme Long Range Scope, $4865.00 (marked down from $6950.00) 2. 10-60x56mm High Master Tactical Turrets MTR-1, $2765.00 (marked down from $3950.00) 3. 8-80x56mm Tactical Turrets MTR-4, $2572.50 (marked down from $3675.00) 4. 5-40x56mm FFP Tactical Turrets FMA-2, $2572.50 (marked down from $3675.00) 5. 3-24x52mm FFP Tactical Turrets Illuminated FML-T1, $2572.50 (marked down from $3675.00) 6. 2.5-25x52mm Tactical Turrets Illuminated MTR-3, $2572.50 (marked down from $3675.00)
2. EuroOptic — Mauser M18 Rifles 30% Off (Great Deal)
A huge shipment of Mauser M18 rifles is en-route to EuroOptic from Germany. In preparation for this rifle influx, EuroOptic has slashed prices on all M18s. Expect to save $200 to $250 per rifle. For example, the 6.5 Creedmoor M18 is marked down from $699 to $499 (save $200) while the .243 Win M18 is discounted from $699 to $459 ($240 savings). Eight chamberings will be available including the new 6.5 PRC as well as hunting classics like the .270 Win, .308 Win, .30-06 Springfield, and 7mm Remington Magnum. The Mauser M18 is a fine European-crafted rifle with a 3-lug bolt, smooth 60° bolt lift, and quality hammer-forged barrel. NOTE: Pending arrival, EuroOptic is taking back-orders which are effectively “pre-orders”.
3. Midway USA — Norma 6.5 Creedmoor Brass, 250 for $99.99
The 6.5 Creedmoor is more popular than ever but like any super-trendy cartridge, supplies seem to be either out of stock or too expensive. If you have a 6.5 Creedmoor, check out this killer deal. You can get 250 Norma 6.5 Creedmoor cases for only $99.99. That works out to just forty cents per case — less than half what you’d pay for some other 6.5 Creedmoor brass. We can’t remember the last time we’ve seen such a great deal on quality brass for such a popular cartridge. But you better act soon — we expect this MidwayUSA deal to sell out quickly.
We love our .45 ACP pistols, and we regularly shoot CCI Blazer Brass .45 ACP ammo. It has proved accurate and super reliable. Right now Natchez is offering a great deal — 500 230gr FMJ rounds for just $144.99, a $35.00 savings. Add a box or two of rimfire ammo to put your order over $150.00, then use CODE FH190621 during checkout and and you’ll qualify for FREE HazMat!
5. Midsouth — Rock Chucker Reloading Kit and Free Die, $269.49
Everything you see above can be yours for just $269.49. Amazing Deal. Right now, Midsouth is selling the Rock Chucker Supreme Master Reloading Kit for $269.49, a fine price considering all the hardware you get: Press, Primer Tool, Scale, Powder Measure, Loading Tray, Reloading Manual and more. Heck, the Rock Chucker press alone is worth $165.00+. This is good starter kit for any reloader with sturdy items, such as the Rock Chucker, that will last a lifetime. And now through 7/7/2019 you’ll get a free RCBS FL die set as a bonus. NOTE: This FREE DIE set is offered through RCBS and will ship separately after you submit a form.
6. Amazon — Plano 52″ Double Rifle Case with Wheels, $99.99
This Plano Double Scoped Rifle Case is an Amazon #1 Best Seller for good reason. It offers the functionality and durability of an SKB-type hard case for HALF the money. This is just $99.99 with FREE Shipping, while the equivalent SKB is around $240.00, so you can buy two Planos for the price of one SKB. The 51.5″ interior will fit most scoped competition rifles up to about 29″ barrels (measure your own rifle to make sure). If you separate the barreled action from the stock you can transport even ultra-long ELR rifles. The handles are convenient and beefy and the wheels make this case easy to move. This is a very tough, roomy case for the money — plus there’s Free Shipping! There is also a smaller 42″ version for $64.99.
Exterior Dimensions: 53.5″ x 17″ x 7″
Interior Dimensions: 51.5″ x 14″ x 5.5″
Pluckable Interior Dimensions: 46″ x 10″
Features: Wheels, Secure Latches, O-Ring Seal, Pressure Relief Valve, Customizable Foam
7. Taurus G2c 9mm — $179.99 with Factory Rebate
This is a good little gun at a great price. Taurus has a factory Rebate through 7/7/19. Palmetto State Armory is selling the sub-compact Taurus 9mm with black frame and stainless steel slide for just $209.99 with FREE Shipping. But the Taurus $30 Factory Rebate lowers your price to just $179.99 for this G2c. Or, if you like the milspec look, you can also get an OD-Green G2c G2c for $184.99 after rebate, just $5.00 more. Despite its small size, the G2c has a 12-round magazine. We like the fact it has a left-side manual safety (unlike the Glock).
8. Graf’s — Platinum Case Prep & Trim + EZ Tumbler, $179.99
If you want to step up your brass preparation game, here’s a great deal. Graf’s is offering the Frankford Arsenal Case Prep & Trim PLUS the EZ Tumbler for only $179.99. That’s an amazing deal considering you could pay $199.99 or more for the Prep & Trim unit by itself, and the EZ Tumbler is regularly $50 or more. This Grafs.com combo deal represents a savings of nearly $70.00.
9. Powder Valley — Alliant and CCI Factory Rebates
Powder Valley notified us about some great Rebate offers from Alliant and CCI. If you need powder or primers, now is a great time to buy — this offer ends June 30, 2019! NOTE: These rebates are separate programs. To qualify for these rebates you need to buy at least 4 pounds of Alliant powder OR spend at least $100 on CCI components. You can’t mix and match to qualify — each program has its own minimums.
ALLIANT Powder — More Bang for your Buck$ Rebate
If you buy at least four (4) pounds of powder you get $2.00 back per pound, with a rebate limit of $20 (for ten pounds). Minimum purchase four (4) pounds required.
CCI — Primed for Action Rebate
Spend at least $100 on CCI® reloading primers to get 20% of the purchase price back. Rebate amount calculated on purchase price only, does not include taxes and/or shipping/handling fees. Maximum rebate $100 per person or household. Minimum spend $100 required.
10. Amazon — NcStar Vism Shooting Mat, $24.99
Looking for a good mat at a great price? For $24.99 now you can grab this NcStar Vism shooting mat. This has decent padding, and reinforced areas for elbows and knees. Full dimensions are: 69″ Long x 35″ Wide. This mat has straps for pre-loading your bipod. When you’re done simply fold in the edges, roll it up into a compact 19.50″ W x 8.50″ H package — about the same size as a sleeping bag. You can pay twice as much for a shooting mat and not get much more quality. Purchaser reviews have been very positive. This mat has earned 80% Five-Star buyer ratings on Amazon.
by Sierra Bullets Ballistic Technician Paul Box
One thing that plays a major role in building an accuracy load is neck tension. I think a lot of reloaders pretty much take this for granted and don’t give that enough thought.
So, how much neck tension is enough?
Thru the years and shooting both a wide variety of calibers and burn rates of powder, I’ve had the best accuracy overall with .002″ of neck tension. Naturally you will run into a rifle now and then that will do its best with something different like .001″ or even .003″, but .002″ has worked very well for me. So how do we control the neck tension? Let’s take a look at that.
First of all, if you’re running a standard sizing die with an expander ball, just pull your decapping rod assembly out of your die and measure the expander ball. What I prefer is to have an expander ball that [can give] you .002″ in neck tension [meaning the inside neck diameter is about .002″ smaller than the bullet diameter after passing the expander through]. If you want to take the expander ball down in diameter, just chuck up your decapping rod assembly in a drill and turn it down with some emery cloth. When you have the diameter you need, polish it with three ought or four ought steel wool. This will give it a mirror finish and less drag coming through your case neck after sizing.
Tips for Dies With Interchangeable Neck Bushings
If you’re using a bushing die, I measure across the neck of eight or ten loaded rounds, then take an average on these and go .003″ under that measurement. There are other methods to determine bushing size, but this system has worked well for me.
Proper Annealing Can Deliver More Uniform Neck Tension
Another thing I want to mention is annealing. When brass is the correct softness, it will take a “set” coming out of the sizing die far better than brass that has become to hard. When brass has been work hardened to a point, it will be more springy when it comes out of a sizing die and neck tension will vary. Have you ever noticed how some bullets seated harder than others? That is why.
Paying closer attention to neck tension will give you both better accuracy and more consistent groups.
Great Case Trimmer for under $130.00
We think Lyman’s new Case Trim Xpress will be a “game changer” for hand-loaders. If you’re like most of us, trimming your brass to length has been a dull, laborious and time-consuming process unless you shell out $500 or more for a top-of-the-line unit. Lyman has broken that mold by releasing an accurate, easy-to-adjust, shoulder-indexing, carbide-bladed, and SPEEDY case trimmer for under $130.00! Given its outstanding performance for the price, the Lyman Case Trim Xpress is a definite winner.
CLICK photo for full-screen view of Case Trim Xpress unit.
Lyman Case Trim Xpress “Hands-On” Review
Review by F-Class John
Case trimming can be one of the most boring and tedious steps in the reloading processes. This is largely because of outdated tools that either require manual turning, clunky pilot systems, or difficult adjustments. In order to overcome these obstacles, you might have to spend $500 for some premium systems. But that has changed with Lyman’s introduction of the new Case Trim Xpress. This bright orange wonder delivers premium trimming performance at a budget price. Available for around under $130, this trimmer offers an easily-adjustable cutting head plus a smart, shoulder-indexing bushing system to improve consistency and speed up the trimming process.
Video Shows How Carbide Cutter Head Adjusts Easily with Index Wheel
The Lyman Case Trim Xpress comes with the main trimming unit, power cord, and 10 bushings in a storage case. These 10 orange bushings let you trim more than 50 popular cartridge types (yes including the 6mmBR, 6.5 Creedmoor, and .308 Win of course). Set-up was simple and straight-forward. Install the bushing you need, turn the unit on and slowly push a piece of brass towards the cutting head. Once the brass is fully depressed, you can start adjusting the dial one click at a time until the case makes contact. Then you start making progressive adjustments and trim until you reach your desired length. The process is so simple that it’ll leave you wondering how you ever used anything else.
Once the machine was adjusted for our brass, we were amazed at how easily and quickly cases could be trimmed. The unit is fairly hefty, so we found it pretty stable just sitting on the bench. If you wish, the unit can also be screwed down for added stability, using the holes in the lower “wings” of the orange housing. There’s a dial adjustment on the side that controls cutter rotation speed (RPM). In our testing, the trimmer worked well across its entire RPM range. These means you can do fast, quick cuts or make slow and precise cuts, as you prefer. And you can adjust the cutter speed to the type of brass you are trimming.
As for trim length control, the adjustment dial has good, positive clicks and the trim length holds very constant. Even after trimming 80+ pieces of brass, we observed trim consistency held within .001″.
One of the things that sets the Case Trim Xpress apart from most trimmers is how it indexes off the shoulder. This ensures that case lengths from mid-shoulder to end of neck are identical for every case (whether they have been sized or not). This is critical for consistent reloading results and will help ensure that every case is optimally positioned in your chamber. A cutting system that indexes off the shoulder is arguably better than a system than merely trims to a given case OAL for both fired and unfired cases.
Another great feature is that this trimmer can be mounted flat on a bench-top, on the underside of a shelf, or even on a vertical wall surface (if oriented horizontally). You can choose different mountings because the clear plastic shroud that catches brass shavings can rotate. This allows the shavings exit port to be orientated to any point on the circle. We liked being able to choose various mounting configurations. Employing little-used wall or shelf space opens up precious bench-top real estate.
Summary — Outstanding Performance for the Price
Overall the Case Trim Xpress is hard to beat for the price. It is one of the few power trimmers we can recommend without hesitation. The machine trims quickly and accurately, the cutter-depth control is precise and easy to use. And the variable speed control is great. Of course we do wish the machine could also de-burr and chamfer brass. But of course that would add quite a bit to the cost, and would probably require a completely different cutting system. For trimming-to-length only, Lyman’s Case Trim Xpress is probably the best trimmer currently available for under $200. This unit should definitely be on the short list of anyone shopping for a variable-speed motorized trimmer.
Do you have some ammo that got loaded incorrectly, perhaps with the wrong powder? Then you’ll want to disassemble the ammo for safety’s sake. You can use an impact puller to do this task, but if you have more than a dozen rounds or so, you may prefer to use a collet-style bullet puller. These work very quickly and positively, making quick work of big jobs. The efficiency of the collet-style puller is worth the investment if you frequently disassemble ammo. These devices retail for under $25.00 (collets sold separately). Normally, you’ll need a specific collet for each bullet diameter. But collets are not that costly, so this isn’t a big deal, particularly if you only load a few calibers, such as .223, 6mm, and .308.
Hornady and RCBS use different mechanisms to tighten the collet around the bullet. On Hornady’s Cam-Lock Bullet Puller, a lever-arm on the top of the bullet puller serves to tighten the collet around the bullet. Simply rotate the lever from the vertical to the horizontal position to grab the bullet. Lower the ram to remove the case. The bullet will drop out when you return the lever arm to the vertical position. This is demonstrated in the video below:
Hornady Cam-Lock Bullet Puller Demonstrated
Collet bullet-pullers resemble a loading die with a lever or handle on the top. They screw into a standard reloading press. Hornady and RCBS both make collet-style bullet pullers. They use the same basic principle — the device tightens a collet around the bullet, and then the bullet is separated from the case by lowering the press ram. NOTE: Collet pullers may leave small marks on your bullets, unlike impact (kinetic) pullers.*
Like the Hornady tool, the RCBS Bullet Puller employs a collet to grab the bullet. However, the RCBS tool tightens the collet in a different way. The head of the RCBS tool is threaded internally. By rotating the lever arm clockwise in a horizontal circle you squeeze the collet around the bullet. To remove the bullet, after lowering the press ram, simply spin the lever arm back in the opposite direction. The use of the RCBS tool is demonstrated in this video:
RCBS Collet Bullet Puller Demonstrated:
WARNING: When removing bullets from loaded cartridges, always make sure there are no obstructions or debris in your shell-holder or under the loaded round. NEVER engage a primer seating accessory on your press when working with loaded rounds. You can cause a round to discharge by contacting the primer! Also, we recommend you keep your head and torso away from the bullet puller tool at all times.
*By contrast, impact pullers rarely mark bullets, particularly if you put a little bit of foam or paper wadding in the closed end of your impact puller. When dismantling loaded rounds, powder kernels can get trapped in the wadding, so you should remove and replace the wadding before changing to cartridges loaded with a different powder type (assuming you intend to save the powder).
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Midway USA — Norma 6.5 Creedmoor Brass, 250 for $99.99
The 6.5 Creedmoor is more popular than ever but like any super-trendy cartridge, supplies seem to be either out of stock or too expensive. If you have a 6.5 Creedmoor, check out this killer deal. You can get 250 Norma 6.5 Creedmoor cases for only $99.99. That works out to just forty cents per case — less than half what you’d pay for some other 6.5 Creedmoor brass. We can’t remember the last time we’ve seen such a great deal on quality brass for such a popular cartridge. But you better act soon — we expect this MidwayUSA deal to sell out quickly.
2. Grafs.com — FREE Litz Book with $100 Lapua Bullet Buy
This is just one example. This deal works with ANY Lapua bullets purchased from Grafs.com.
Lapua makes great bullets. Bryan Litz writes great books. And now you can get both with this special promotion from Graf & Sons. Here’s the deal — if you buy at least $100.00 worth of Lapua bullets at Grafs.com, you’ll get a free Applied Ballistics book authored by Bryan Litz. You can mix and match any types of Lapua bullets — as long as the bullet order totals $100.00 or more. The book may be one of various Litz titles, such as Modern Advancements in Long Range Shooting or Ballistic Performance of Rifle Bullets. NOTE: You do NOT get to pick the book title — you get what’s available. You want to move quickly on this deal — books are limited to supply on hand.
3. EuroOptic — FREE Kestrel 3500 with Leupold Mark 5HD Scope
Leupold’s new Mark 5HD scopes are impressive. Make no mistake — Mark 5HDs are fine tactical optics fully capable of winning PRS/NRL matches. Available in 3.6-18x44mm, 5-25x56mm, and 7-35x56mm with a multitude of reticle choices, there’s something for every tactical shooter out there. And right now when you buy any Laupold Mark 5HD scope from EuroOptic.com you get a FREE Kestrel 3500NV, a $269.00 value. That’s a fantastic bonus! The FREE Kestrel will be added to your cart automatically at no extra cost.
4. Natchez — Weaver T-Series XR 36x40mm, $389.99
With so many zoom scopes on the market it’s easy to forget some of the best fixed power scopes out there. Weaver T-Series scopes have served benchrest shooters for decades and the new side-parallax Weaver XRs take the T-Series to a new level. You can pick up the Weaver T-Series 36x40mm XR Scope for the crazy low price of $389.99.(This has FCH with 1/16 MOA dot reticle.) You can also grab the 46X version for $569.99 or the Classic T-Series 36X with front objective parallax for just $329.99. All choices are great bargains.
5. Midsouth — Hornady 123gr 6.5mm bullets, 250 for $59.99
We featured 6.5 brass this week and here’s the matching bullet deal. You can grab 250 Hornady 123gr 6.5mm bullets for just $59.99. That’s a mere twenty-four cents per bullet! The 120-130gr class of 6.5mm bullets is an excellent choice for both paper-punching and PRS. These Hornady 123-grainers offer good accuracy with less recoil (and much lower cost) than the 140-145gr class of 6.5mm match bullets.
6. Federal 20% REBATE for Bullets, Brass, and Primers
Reloading component costs add up quickly which is why we include this great rebate offer from Federal. Just purchase at least $100 worth of Federal reloading components (bullets, brass, and primers) and then fill out this form and you’ll get 20% back up to $100. The bottom line is that if you need any components, this is the time to stock up. NOTE: This Federal Rebate also applies to components purchased from other vendors such as Bruno’s, Midsouth, and Powder Valley.
7. Midsouth — Rock Chucker Supreme Reloading Kit, $269.49
Everything you see above can be yours for just $269.49. Amazing Deal. Right now, Midsouth is selling the Rock Chucker Supreme Master Reloading Kit for $269.49, a fine price considering all the hardware you get: Press, Primer Tool, Scale, Powder Measure, Loading Tray, Reloading Manual and more. Heck, the Rock Chucker press alone is worth $165.00+. This is good starter kit for any reloader with sturdy items,such as the Rock Chucker, that will last a lifetime. NOTE: This is listed at $299.99 on the Midsouth Home Page, but the product page now shows $269.49 and that’s what shows when you add the Kit to your shopping cart.
8. Area 419 — Master Funnel Kit, $90.00
Precision loading often requires dropping powder one case at a time and without the right gear this can cause issues. Bad powder funnels can cause bridging or stuck kernels leading to light loads in one case and heavy in another. These issues can be solved using the Master Funnel Kit from Area 419. This kit contains 6 caliber specific color coded heads (22 cal, 6mm/243, 6.5mm/264, 7mm/284, 30 cal, 338 cal) plus the funnel and stand. The funnel is specially designed to ensure powder doesn’t bounce out and the heads are securely threaded and designed to fit snugly on the shoulder of the brass. If you’re looking to upgrade your gear to the top of the line this is the one to get.
9. Amazon — Tipton Gun Butler, $23.49
Here’s a handy, portable gun caddy that works well for rifle maintenance chores at home or at the range. Right now the Tipton Gun Butler is marked down to $23.49. The Gun Butler offers a convenient platform for cleaning your gun or doing tasks such as scope mounting. Two removable forks/cradles hold a gun securely in place, while compartments and slots hold solvents, jags, brushes, mops, and tools. The Gun Butler features a convenient carrying handle, and slip-resistant rubber feet. NOTE: The front cradle may not work well with wide benchrest fore-ends.
Soon after Lapua released the 6.5×47 cartridge, wildcatters recognized the potential of a necked-down 6mm version of the case. The 6-6.5×47 has emerged as a great, do-it-all cartridge that performs well in High Power competition, 600- and 1000-yard benchrest, and PRS tactical matches. But the 6-6.5×47 is not just for paper-punching. An efficient cartridge with great inherent accuracy, the 6-6.5×47 can be an excellent, flat-shooting, long-range varmint round. Here we feature Stan Stewart’s BAT-actioned 6-6.5×47 varminter. Fitted with a Krieger 1:10″ barrel, Stan’s rifle excels with a wide variety of varmint bullets. Whether driving 70-grainers at 3700 fps, or pushing the Berger 88gr High-BC FB bullet at 3400 fps, this 6-6.5×47 delivers half-MOA (or better) accuracy, in a well-balanced, easy-handling rifle.
The 6-6.5×47 for Precision Long-Range Varminting
The rifle carries a 12-42x56mm Nightforce NSX in Nightforce rings “hand-lapped for optimal fit/alignment”.
‘Seller’s Remorse’ Spurs 6mm Project Report by Stan Stewart
After selling my 6mm Remington Ackley Improved a couple of years ago and wishing I hadn’t, I begun to think about a new custom rifle for work on Prairie Dog towns and New York wood chucks at 600+ yards. I have a .223 AR and 22-250 for medium ranges but I missed my 6mm AI for long-range work so I started asking questions.
The 22-250 is a fine chambering, but it is hard on barrels, and I think the 6mms may have an accuracy edge out past 400 yards. Also, shooters today enjoy a vast collection of really great 6mm bullets. Barrel life and bullet options were two main reasons I decided to build a 6mm rather than another .224-caliber gun. But the question remained… what 6mm chambering to choose?
I started doing serious research on the 6-6.5×47. I received a lot of good advice from AccurateShooter.com and other websites on the pros and cons. I also talked to gunsmiths — quite a few recommended the new cartridge as well. Some of the cartridge attributes I liked was the small rifle primer, enough case capacity to efficiently reach 3700 fps with a 70gr bullet and 3400 fps with an 85-grainer without being terribly over-bore. Most important was the 6-6.5×47’s reputation for inherent accuracy without being finicky like my 6mm AI. So, having chosen my cartridge, I started asking for gunsmith recommendations. Again the folks on the AccurateShooter.com Forum were very helpful. After many conversations I settled on Dave Bruno in Dayton, Pennsylvania. He was a good choice.
Putting Together the New Rig with Premium Components
From the get-go, I knew I wanted a BAT action and Krieger barrel. BAT Machine and Krieger Barrels enjoy a great reputation in the shooting industry. BATs are beautifully-machined, smooth, and strong. Krieger cut-rifled barrels are known for dependable accuracy and long barrel life. While many 6-6.5×47 shooters choose an 8-twist barrel to shoot the 100-108gr bullets, I would be using smaller, varmint-weight bullets, so I selected a 1:10″ twist Krieger. This would allow me to shoot bullets from 60 grains up to 90 grains. Dave chambered the barrel with a .269″ neck and fluted the barrel to save weight. I also had Dave install a Vais muzzle brake. Dave fitted the BAT with a 2 oz. Jewell trigger, mounted a +20 MOA scope rail, then pillar-bedded the BAT into a McMillan Hunter-Class-style fiberglass stock.
Load Development for Varminting
I had selected a few powders and bullets recommended by other 6-6.5×47 shooters and started by seating all the bullets .005″ off the lands. The powders I selected were Varget, Vihtavuori N-550, and Reloder 15.
I was very pleased with the 88gr Bergers. In initial testing, they grouped well and I was able to drive them to 3400 fps easily. As I wanted a gun for long-range varmint work, I was hoping the 1:10″-twist barrel would provide enough stability for the heavier weight bullets. It did — the 10-twist worked great! I was able to shoot the lighter weight bullets and the 88s were superb. With a BC of 0.391, leaving the barrel at 3400, these bullets were still traveling at 2600 fps at 600 yards!
I did a lot of testing, recording group sizes for a variety of different bullets (see below) and powders. With group size/velocity data in a spreadsheet I was able to “crunch the numbers” and choose my preferred loads. The data drew a clear picture of what the rifle shot best. Here is a chart showing comparative group sizes, arranged by bullet type. On the last three lines, powders are listed by average for all bullets.
Final Thoughts on the 6-6.5×47 Lapua
I have owned three rifles chambered in 22-250 and will always own a rifle in this caliber because it is inherently accurate and drives a 50gr bullet at 3800 fps. No question the 22-250 can be deadly out to 500 yards. However, I’ve found that shooting past 400 yards with the light bullets is difficult if there is any wind at all. That’s why I liked my 6mm AI for those longer shots and why I decided on the 6-6.5×47 Lapua. I couldn’t be happier with my choice. The only thing that could make it better is if Lapua would produce the 6-6.5×47 as an “official” factory 6mm cartridge with 6mm necks right out of the box. But overall, I am very happy with the cartridge, and I thank Dave Bruno for producing a superbly accurate varmint rifle.
Ace tactical shooter and gunsmith Jim See of Elite Accuracy LLC recently tested a Frankford Arsenal rotary brass tumbler. Like the older Thumbler’s Tumblers, this can tumble your cases in a liquid solution. The wet-tumbling process worked very well Jim reports. Posting on Facebook, Jim noted: “I was super impressed with the Frankford Arsenal rotary tumbler and cleaning packs they sent me. I ran 350 pieces of brass for one hour. They now look great.” Jim appreciated not having to deal with dry tumbling media, such as crushed walnut shells. Dry media produces dust and can leave residues or clog flash-holes.
Interestingly, Jim recommends you try wet-tumbling WITHOUT using stainless media. At least give it a try. Tumbling without media simplifies the process and you don’t have to worry about pins stuck in flash-holes or case-necks*. Jim reports: “Stainless steel pins come with the Frankford kit, but mine hit the trash right out of the box. There is no need to clean the inside of your cases 100% and that’s all the pins add to the equation. The brass bumping brass with hot water and Frankford’s liquid cleaner works great all by itself.” One wag stated: “That’s great to hear. Stainless steel pins are a PITA.”
Other Facebook posters concurred with Jim’s evaluation of the Frankford Arsenal Rotary Tumbler:
“I’ve had one for a couple years, and it works well. I usually run about 250-300 Dasher cases at once in it. But I use the pins because I’m OCD about clean brass.” — David W.
“I’ve had one for a year and a half and it definitely works with or without pins.” — Luke C.
“I got one about six months ago and have yet to use any SS media. I just use some dawn, distilled water, and Lemi Shine®. Turns nasty 5.56 range brass bright and shiny.” — Brian D.
“I don’t use the pins either and use a combination of Dawn soap and Lemi Shine.” — Jon N.G.
This video shows how to assemble and operate the Frankford rotary tumbler. But note, Jim See does NOT feel that it is necessary to use stainless media.
How to Dry Your Brass — Hair Dryer Vs. Machine
The downside of wet tumbling is that you end up with a pile of wet brass at the end of the cleaning cycle. There are many ways to dry brass, from drying in the sun to using a kitchen oven (be careful not to “overcook” your brass). One Facebook poster asked Jim: “What is your drying method for wet brass, and how long does it take?”
Jim See replied: “To start I just drain off the dirty water, and rinse the brass with clean hot water. Then I roll the brass on a towel for 30 seconds and put the brass in a one-gallon bucket. Next I insert a hair dryer in the bucket (with the brass) and let it run for about 5 minutes. With this procedure, the drying process for me is done in less than 10 minutes.”
Jack Lanhart has another method: “I use a food dehydrator. It takes 30 to 45 minutes.”
For those who don’t want to mess with towels and hair dryers, Frankford Arsenal offers a matching Platinum Series Case Dryer that simplifies the process of drying brass. Lyman also makes an excellent Cyclone Case Dryer. Both drying machines cost about $60.00 and both have multiple levels so you can separate different types of cartridge brass. Lyman states that “The forced heated air circulation of the Cyclone will dry your brass inside and out within an hour or two, with no unsightly water spots.” The Lyman dryer can also be used for ultrasonically-cleaned gun parts.
*The Frankford Rotary tumbler does include media separators if you choose to use the provided pins or other media. CLICK HERE for diagram showing how to use media separators.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Stocky’s Stocks — LRC Stocks with AccuBlock Now $188.88
There’s a great sale going on this week at Stocky’s Stocks. This sale covers many different LRC (Long Range Composite) stock styles, all with the built-in AccuBlock System. Chose a high-comb benchrest style LRC stock, a hunter-style MRC stock, or the new LRC thumbhole stock. All are now just $188.88, even with premium finishes, such as Kryptec Camo. The Stocky’s LRC series with AccuBlock Bedding System is a terrific choice for a varmint rifle, and you won’t find a better value anywhere.
2. Bruno’s — Huge Sale on Barrels, Bullets, Brass, Actions & More
There’s a big SALE going on right now at Bruno Shooters Supply. Save $20 on Krieger Barrels for starters, then you can also save on bullets, brass, powder, and loaded ammo. In addition, high-end BAT actions and Flavio triggers are on sale. Rimfire shooters will find some excellent ammo deals, and ALL Hornady products are discounted. But you MUST ACT SOON! This SALE ENDS Monday evening, June 10, 2019 at 11:59 PM Arizona Time. Discounts apply to items in-stock ONLY.
3. EuroOptic — Great Sale on Vortex Strike Eagles
Need a good basic optic for your hunting or varmint rifle? Have a tight budget but still need good glass and adjustable parallax? Then check out these Vortex Strike Eagles. Save $140-$150 now at EuroOptic.com. Sale price is just $349.99 for the 4-24x50mm and $309.99 for the 3-18x44mm. EuroOptic’s Jason says these scope are a “killer value” with “target turrets, parallax adjustment close enough for rimfire, and good zoom range”. These Strike Eagles are also fairly short and light-weight, so they are good for hunters. Both these Second Focal Plane scopes offer 1/4-MOA clicks and nice EBR-4 illuminated reticles.
4. Midsouth — MTM Shooting Range Box, $39.20
The MTM Shooting Range Box employs a two-piece design. The removable top storage compartment holds oils, solvents, brushes, patches, and small accessories. Unlatch the top box to reveal a large, deep storage area that will hold tools, earmuffs, ammo boxes, and other larger items. With 18 compartments, MTM Shooting Range Boxes are big enough to hold pretty much everything you need at the range (except shooting rests). Plus there are cradles so you can do gun maintenance at the range. This MTM Range Box is also offered through Amazon.com for $39.20 with free shipping.
5. Graf’s — 10% Off All Forster Products
Forster makes GREAT products. Our staff own and use Forster presses, dies, case trimmers, primer tools, chamber/deburring tools, and more. And Forster has outstanding customer service. And did you know that Forster will custom-hone your full-length dies for a modest fee? Right how you can save 10% on ALL in-stock Forster products at Graf & Sons. But folks, don’t delay — this 10% Off Forster Deal expires June 12, 2019 at 11:59 pm CT.
6. Palmetto State Armory — Smith & Wesson 15-22 Rifle, $299.99
Here’s a fun .22 LR rifle with the style and ergonomics of an AR15. Smith & Wesson’s M&P 15-22 Sport features a 10-inch M-LOK handguard, and nicely-designed Magpul MBUS® front and rear folding sights. The buttstock is a classic AR-style unit that easily adjusts for Length of Pull. The upper boasts an integrated Picatinny-style rail for optics and other accessories. NOTE: S&W 15-22 owners love this little rimfire — it has earned dozens of 5-star reviews from actual buyers.
7. Graf’s — Buy 8-lb keg of select powder, get FREE 1-pounder
Save on powder — right now at Graf & Sons, if you buy an 8-lb keg of select Hodgdon or IMR powders, you get a FREE one-pound or 14-ounce container of the same powder. This deal works with fourteen (14) popular Hodgdon and IMR powders for rifles, pistols, and shotguns. So if you’re running low and need to stock up on your favorite powders, here’s your chance to cash in on some savings. That free one-pounder can be worth up to $32.00. CLICK HERE for POWDER DEAL.
8. SIG Sauer — Buy P226 Pistol, Get FREE X-5 Air Pistol
Here’s a cool deal for Father’s Day. Buy any new SIG Sauer P226 pistol now through June 30, 2019 and get a SIG STORE Rewards Coupon for a free X-FIVE Air Pistol. This 2 for 1 Father’s Day Promotion offer runs from 06/01/2019 until 06/30/2019. To claim your free X-FIVE visit Sigsauer.rebateaccess.com, follow the instructions to complete the form, and upload or mail your receipt. Once validated you will receive a promo code that can be redeemed at Sigsauer.com for an X-FIVE Air Pistol.
9. Amazon – Proster Wind Meter, $16.99
Wish you had a modern impeller-style wind meter but only shoot a couple matches a year and can’t justify spending $150 (or more) on one? This Proster wind meter has a very impressive 4.5 star overall rating (with hundreds of reviews), so buy with confidence. Now on sale for just $16.99, this is a very useful tool for a bargain basement price. Get this affordable Wind Meter to ensure you have reliable wind readings for ballistics calculations. And unlike a costly Kestrel, with this low-priced wind meter, you won’t feel too bad if it gets lost or misplaced some time.
Here’s the super-speedy way to turn case-necks. Our friend Erik Cortina figured out how to turn his match cartridge case-necks using his milling machine. Erik told us: “While in Raton, Mid Tompkins told me that he turns his brass on milling machine. He said he could do about 500 in two hours, so I decided to try it.”
Erik fitted a Don Nielson “Pumpkin” neck-turner to the mill, and he used a modified 21st Century case holder to secure the brass. As you can see from this video, Erik was very successful with the process. The tool spins at 1500 rpm, turning Lapua 6.5-284 cases that have been necked up to 7mm.
Video Shows Erik Cortina Neck-Turning Cases with Milling Machine:
Cartridge Brass: Lapua 6.5-284 necked up to 7mm
Lubricant: Lithium grease inside and outside of neck
Neck-Turner: Nielson Pumpkin running at 1500 RPM
It’s hard to argue with Erik’s results. Here are his turned Lapua cases, which have neck-wall thickness consistent to two ten-thousandths of an inch. Think you could do better turning manually?
Some of Erik’s Facebook friends had questions about this process:
Q: Who makes the shell-holder?
Erik Cortina: I did! The shell-holder you can get from 21st Century. I Tig-welded a punch as a handle.
Q: I love the idea of working smarter not harder! Any galling issues? What are your mitigation techniques?
Erik Cortina: No issues. I use lithium grease in spray can. Makes a foam that I dip necks into.
Q: Shouldn’t either the case or the cutter be floating to allow most precise neck turning?
Erik Cortina: Up until [I tried this] I believed the same thing. I was going to build a floating case holder but decided to try rigid setup on a few cases before I built it. Results were great. Neck thickness doesn’t vary more than .0002″, which is same as when I was doing it with floating case holder on the lathe.
Q: Any problems with the Pumpkin changing the cut as it heats up?
Erik Cortina: No — there were no issues with that.
NOTE: Erik Cortina is a very skilled machinist who custom-crafted fittings used for this process. This kind of neck-turning with a milling machine may not be for the everyday hand-loader!
Nielson “Pumpkin” Neck-Turner
The circular orange cutting fixture on Erik’s Milling Machine is a Don Nielson “Pumpkin” neck-turning tool. Don designed this tool to be used by hand or with power. The Pumpkin boasts an eccentric mandrel that allows the cut to be adjusted easily in precise .0001″ increments. Benchresters like this as it allows for very precise control of cut depth and neck-wall thickness.
Jason C., commenting on Erik’s YouTube video stated: “I have a couple of those too. Nothing cuts like a Pumpkin. [Don Nielson] made the best cutter tool ever.” These are still available if you ask around. The photo shows Don with a case-holder mounted to a power assembly. A talented machinist and tool-maker, Don has also been a successful short- and long-range benchrest shooter, who has won NBRSA 600-Yard Championships. CLICK HERE to read about Don’s success with the 6.5×47 Lapua.
Nielson Neck Turner with carbide mandrel. Photo Courtesy Butch’s Reloading.
Imagine if a man was asked to leave a restaurant for wearing a Gay Pride shirt. Or if a women was refused service because she was wearing a headband with a #MeToo message. The mainstream media would be in a frenzy. The incident would make national news. Liberal politicians would be holding angry press conferences, and CNN talking heads would be loudly demanding new legislation.
But guess what, there is another kind of discrimination in our society, a form of intolerance that the mainstream media actually emboldens — hatred towards gun owners. Intolerance towards those who support the Second Amendment — even those who have served their country in uniform.
Recently in Maui, HI, a restaurant manager demanded that disabled Vietnam veteran Jimmy Barber and his wife leave the establishment solely because Jimmy was wearing a shirt that said “Ultimate Reloader” and included a logo with the outline of a cartridge between the letters U and R.
Jimmy Barber served in Vietnam as a Navy Seabee “in-country” from 1970-71. He now suffers from heart disease because of exposure to agent orange. And the Maui eatery demanded that he (and his wife) leave the premises simply because his shirt said “Ultimate Reloader”. That’s despicable.
Isn’t it ironic that this intolerance occurred in Hawaii? Were it not for the sacrifice of American service men and women in the Pacific during WWII there is a good chance that the Hawaiian islands would no longer be part of the United States.
In a letter to Gavin Gear of UltimateReloader.com, Jimmy revealed: “My wife and I are in Maui. We were asked to leave a restaurant because I was wearing one of your t-shirts. I did not make a scene and I was very proud to leave.” Jimmy, by the way, is a dedicated pistol and rifle shooter who reloads a dozen cartridge types.
After learning of this incident, Gavin Gear contacted Starline Brass. Starline has decided to send Jimmy 250 new brass cases — just a way of saying “thanks” to Jimmy for his service to his country.
How to Stand Up for Your Rights
We all need to do our part to preserve our gun rights. Gavin Gear has collaborated with The Gun Collective on YouTube to explain what we can do to preserve our gun rights. Gavin states: “I do appreciate everyone out there in the gun community that is fighting for our rights. We need to stand together! And thanks Jimmy for ‘representing’ Ultimate Reloader!”
Like the Hornady tool, the 
‘Seller’s Remorse’ Spurs 6mm Project
Final Thoughts on the 6-6.5×47 Lapua
The circular orange cutting fixture on Erik’s Milling Machine is a Don Nielson “Pumpkin” neck-turning tool. Don designed this tool to be used by hand or with power. The Pumpkin boasts an eccentric mandrel that allows the cut to be adjusted easily in precise .0001″ increments. Benchresters like this as it allows for very precise control of cut depth and neck-wall thickness. 
