AR-platform rifles are fun and versatile, but the standard, mil-spec triggers leave much to be desired. They tend to be gritty, with creep and heavy pull weight. One of the easiest, most effective AR upgrades is a trigger group swap. An improved fire control group makes a huge difference. There are many aftermarket trigger options for the AR platform rifles. Choose single-stage or two-stage, either standard trigger assembly or unitized “drop-in” trigger, such as those made by Timney or Triggertech.
When upgraded with a precision trigger and match barrel, AR-platform rigs work great in NRA High Power competitions (Photo from NRA Blog, at Camp Perry).
Two-Stage vs. Single-Stage Triggers
Two-stage triggers have two separate movements. The first stage offers a light, spring-loaded pressure that works against the shooter’s pull until stopping at the second stage – this is called “take-up”. If there is no spring pressure, it is known as “slack”. Should the shooter continue to pull the trigger once he’s arrived at the second stage, the mechanism will operate like a single-stage trigger from there until engaging the sear and firing the gun. Some shooters prefer a two-stage trigger because it allows a mental preparation (first stage) before the final decision to “break the shot”.
Single-stage triggers feature no take-up or slack, as they begin engaging the sear as soon as the shooter begins pulling the trigger. Some competitive shooters prefer the two-stage trigger because of the feedback it provides during its first stage, while other shooters, including those using their rifle in tactical scenarios, may want the surety of a single-stage trigger, ready to engage and fire once their finger is inside the trigger guard. Regardless of preference, a good trigger will feature minimal creep and should be free of grittiness, providing a smooth, even break.
Drop-In Trigger Assembly vs. Standard Trigger Group
Once you decide between a single-stage or two-stage trigger, you can choose between standard and drop-in trigger groups. Standard trigger groups feature all the fire control group parts separated, and need to be pieced together and installed much like a mil-spec trigger, while drop-in trigger are pre-assembled and contained within a casing that simply drops in to the receiver and accepts the pins, hence the name.
After-Market Trigger Comparison
Some shooters prefer drop-in triggers due to the ease of installation, while others opt for standard groups so they can access the components individually for cleaning adjustment or replacement. If one piece of a drop-in trigger fails, you’ll need to either replace the entire unit or send it to the manufacturer for repair, whereas you may be able to simply replace the broken component of a standard trigger without needing a whole new trigger set.
Trigger Terminology — “Creep”, “Stacking”, “Overtravel”
“Creep” or “travel” is the distance the trigger moves between the end of take-up and when the trigger breaks to fire the fun. Too much creep can affect accuracy, but no creep can be unsafe, as the shooter may not be prepared to fire. “Stacking” occurs when the trigger weight actually increases during travel — this shouldn’t happen. Lastly, “overtravel” is the distance the trigger continues moving back after the gun fires.
This article is based on a longer story in the NRA Blog.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Brownells — Radical Firearms AR-15 with 16″ Barrel, $669.99
⏺ Good AR value given current market, very trustworthy seller
We know many readers are looking to add a basic .223/5.56 AR to their collection. Many vendors are pretty much sold out of complete rifles, but we found a good deal at Brownells. The Radical Firearms 16″ SOCOM 5.56mm AR-15 rifle uses MIL-STD Upper and lower receivers. The metal free-float handguard offers a 12″ RPR top rail providing plenty of options for optics and accessories. The MFT Grip and MFT Stock provide a comfortable hold on the rifle. Complete price is $669.99. Sights and/or optics sold separately.
2. Grafs.com — Redding Dies in Stock!
⏺ Very large selection of Redding Dies — your search ends here
Graf & Sons just received a large shipment of Redding Reloading Dies — both sizing and seating dies. You’ll find a large selection of types, basic sets as well as micrometer seaters and bushing FL dies. Graf’s has Redding dies in a myriad of sizes from .17 Fireball up to .338 Lapua Magnum. You’ll find dozens of popular type including: .204 Ruger, .22 PPC, .22 BR, .223 Rem, .224 Valkyrie, .22-250 Rem, 6PPC, 6BR, 6XC, .243 Win, .260 Rem, .284 Win, 7mm WSM, .308 Win, .30-06, 300 Win Mag, and countless more. Prices vary considerably based on cartridge choice. The selection is very good (except for 6mm and 6.5 Creedmoor).
3. Natchez Shooters Supplies — Sig Sauer Whiskey 5 Scope Sale
⏺ Best Sale in many months on quality Sig Sauer riflescopes
This week Sig Sauer Whiskey 5 riflescopes are on sale at Natchez. Rugged and reliable, these Whiskey 5 scopes are justifiably popular with tactical shooters and hunters. Right now you can get huge savings — $300, $400, even $500. For example, the 5-25x52mm Whiskey 5 is now $889.99, marked down from $1399.98 — a $509.99 savings! Use the money saved for a spotting scope, Kestrel, or other gear.
⏺ Owners praise this pistol for accuracy, ergos, trigger
Do you shoot IDPA or 3-gun matches? Then take a good look at this 9mm Canik. Shooters report exceptional accuracy. We shot this at Media Range Day in 2020 and can confirm the ergonomics, balance, and trigger are good (much better than a typical stock Glock). Right now the 9mm Canik TP9SFX is just $499.99 at KyGunCo, including TWO 20-rd mags plus a polymer holster. This pistol features a grey cerakote finish and 4 Red Dot interface plates. TP9SFx Owner Reviews: “For the money [it] absolutely can’t be beat. The Canik is on par with $1500 setups!”; “Trigger is extremely light and crisp with hardly any reset.”
⏺ Great deals for AR500 steel targets — watch video above right
On sale now at Midsouth Caldwell’s new bright, easy-to-see targets come in all shapes and sizes for competition, training, and recreational use. Made of AR500 hardened steel, these targets can withstand thousands of rounds. Rated up to a 3000 fps impact velocity and a 3500 ft-lb impact energy, these targets come in seven various sizes with three hanging solutions. These bright yellow AR500 targets are On Sale now at Midsouth, starting at just $14.79 for 5″ Gong Target.
⏺ Match-grade ammo for less than cost of just the Lapua Brass and Bullets
If you shoot a .308 Win, check out this deal on ammo loaded with premium Lapua cartridge brass and true match-grade Lapua Scenar bullets. You could pay $90/100 for Lapua .308 Win brass and $67/100 for the Scenar bullets (if you could find them in stock). That would be $157 per hundred, or $1.57 for just a case and a bullet. Here you are getting a fully loaded round (with primer and powder) for $1.50 — less money! Choose 155gr .308 Win, 167gr .308 Win, or 175gr .308 Win — all top-quality stuff.
7. Frankford Vibratory Tumbler ($48.99) or Wet Tumbler ($99.95)
⏺ Wet Tumble or Dry Tumble — you choose and save either way
Do you prefer vibratory tumbling with dry media, or wet tumbling with a rotary system? Either way, Frankford Arsenal has you covered. And right now you can enjoy big savings on either Tumbler system. The Quick-N-EZ Vibratory Case Tumbler is just $48.99 (or $58.94 with media separator). Or choose the excellent Platinum Series Rotary Tumbler Lite for $99.95.
⏺ Great Value on versatile security cabinet — good secondary safe
In addition to a heavy, primary gunsafe, many gun-owners can use a smaller security cabinet for another area of the house, for the garage, or even for an RV. If you’re looking for a good basic gun locker, check out the SnapSafe Premium 12-Gun Tactical Cabinet. It has a simple key-lock system and can fit in most closets. Purchasers praised this unit given the low cost: “For a gun case below $200 you can’t get much better than this” and “More of a light-weight gun locker … it is well made and sturdy though, and is much better than I expected for the price.”
⏺ Sweet deal on Ear and Eye Protection — good spare set for friends
Every shooter needs good eye and ear protection. Get BOTH the E-Max Muffs and Shooting glasses for just $32.79 on Amazon with free shipping. This combo can be an affordable spare set for yourself or to have on hand for your guests. The E-Max earmuffs offer a 23 dB Noise Reduction Rating while allowing you to hear range commands.
The U.S. Military has a new machine gun and a new rifle in a new caliber. SIG Sauer has confirmed the final delivery of the Next Generation Squad Weapons (NGSW) systems to the U.S. Army, consisting of new 6.8x51mm Hybrid ammunition, the NGSW-AR lightweight belt-fed machine gun, the SIG NGSW-R rifle, and SIG suppressors. Ron Cohen, SIG Sauer President/CEO stated that work with U.S. soldiers has “led to rapid advancements over the current weapons systems and resulted in our delivery of the most innovative Next Generation Squad Weapons system to the U.S. Army.”
The new systems will shoot 6.8×51 Hybrid ammunition — a lightweight cartridge designed to handle higher pressures resulting in increased velocity and terminal performance. In civilian form, SIG Sauer calls this cartridge the 277 SIG FURY. The 277 SIG Fury and the military 6.8x51mm cartridges feature a conventional brass upper case body with a steel alloy bottom, case-head section. The hybrid design allows the ammo to run at significantly higher pressures than conventional ammunition. SIG Sauer states that “despite its revolutionary design, [this] hybrid ammunition can be manufactured on a widespread basis immediately.”
The SIG Sauer 6.8mm hybrid ammunition is designed for increased penetration at greater distances. Cohen continued, “using patent-pending technology the SIG Sauer Ammunition Division has engineered a completely new cartridge resulting in a more compact round, with increased velocity and accuracy, while delivering a substantial reduction in the weight of the ammunition.”
This video shows gun features and includes firing sequences with thermal cameras (1:50 time).
The new 6.8x51mm Hybrid ammo gives the new guns significant advantages: “The SIG Sauer Lightweight Belt-Fed Machine Gun (NGSW-AR) doubles the effective range and is 40% lighter than the current M249 while maintaining the preferred belt-fed operation, with reduced felt recoil to increase accuracy. The SIG SAUER Rifle (NGSW-R) is built on the foundation of the battle tested MCX platform with the added firepower of the 6.8×51 round; both the NGSW-AR and NGSW-R feature familiar AR-style ambidextrous ergonomics designed for a seamless transition from the legacy weapons to the SIG NGSW system.”
SIG SAUER Lightweight Machine Gun (NGSW-AR)
The SIG Sauer NGSW-AR is a light-weight (under 15-lb.), medium-caliber machine gun chambered for 6.8x51mm Hybrid ammunition. SIG Sauer designed the NGSW-AR to be 40% lighter than current systems, and dramatically reduce felt recoil while maintaining traditional belt-fed operation to increase downrange capability. This 6.8mm machine gun features ambidextrous AR-style ergonomics, quick detach magazines, increased M1913 rail space for optics, folding buttstock, and quick-detach suppressor. SIG Sauer claim this NGSW-AR “vastly improves upon the operation and function of the legacy M249.”
SIG SAUER Rifle (NGSW-R):
The NGSW-R lightweight rifle (aka MCX-Spear) is derived from existing SIG military rifles with the added firepower of the 6.8mm round. Features include a fully collapsible and folding stock, rear and side charging handle, free-floating reinforced M-LOK™ handguard, fully ambidextrous controls, and quick-detach suppressor.
277 SIG FURY (6.8x51mm) from SIG Sauer
The 6.8x51mm cartridge will be offered by SIG Sauer in a civilian version called the 277 SIG FURY. This boasts a SAAMI maximum average pressure of 80,000 psi, driving a 135-grain bullet to 3,000+ fps. That 80K PSI pressure is WAY higher than almost all other cartridge types. To achieve these high pressures, the 277 FURY uses a hybrid case with a brass body and harder alloy metal case head. This design allows the cartridge to run very high pressures. Dan Horner of SIG Sauer told us: “When the handloaders get hold of this brass, it will be a game-changer for sure”. We envision this cartridge could be necked down to 6.5 mm and it would dramatically out-perform the 6.5 Creedmoor. And yes the official name of the cartridge is all caps “277 SIG FURY”.
Retro is back — at least in the CMP’s Standard Modern Military Rifle AR class. Though Service Rifle competition has evolved to allow optics and heavy barrel profiles, the Standard Modern Military Rifle (AR category) is truly a “blast from the past”. Overall weight is limited to 7.5 pounds, and the rifle must be equipped with iron sights (Rule 5.2.3). In addition, the rifle “be based on the M-16 rifle or be based on an AR design” with “exterior configuration similar [to] the original military or military-type rifle”. See Rules.
With this in mind our friend Dennis Santiago recently put together his own AR-platform Standard Modern Military Rifle for matches run under CMP Competition Rules. This is not quite a classic AR, as it has a metal free-float handguard (vs. plastic handguards), but it IS light (7.3 pounds), and it does have iron sights — a key requirement for Standard Modern Military class rifles.
Here is Santiago’s CMP Modern Military Rifle (Standard Class) with an ultralight free float tube that has a titanium barrel nut, and mechanical, center-able front sight. The barrel is an AR-Stoner brand 20″-long 1:7″ Government contour chambered in 5.56×45 NATO. Dennis says: “This makes the 7.5-lb weight limit with a few ounces to spare. We’ll see how well it drives soon enough.”
Dennis explains: “The Standard Modern Military (AR) is a category of military-style rifle that shoots the 200-yard, 30- or 50-shot courses alongside the M1 Garands, Springfields, Vintage, and M1 Carbines. This one boasts a Midwest Industries (MI) ultralight Free-float Handguard and a Yankee Hill folding front sight. Any Government contour or thinner profile rifle-length gas tube barrel with a 0.750″ gas block will work.” Colt makes a suitable Government Contour 20″-long, 1:7″-twist barrel, sold by MidwayUSA.
To test the accuracy of his rifle, Dennis fitted a Mantis-X unit on the top of the float tube. The Mantis-X records the movement of the rifle to interpolate shot placements. Dennis reports: “I spent some extra time at the range grabbing a decent zero for my Modern Military rifle. I stuck a Mantis-X on it to record a few shots shooting offhand at the plates at 200 yards. It drives very easily even with no shooting coat or glove.” The Mantis-X is attached just forward of the carry handle, on top of the MI free-float handguard. The Mantis-X works with live fire as well as dry fire. It communicates via BlueTooth to a smartphone App.
Rifle Shoots Well with 77gr Sierra MatchKings
The gun is presently zeroed with 77gr Sierra MatchKing ammunition. Dennis reports his rifle “can easily hold the X-Ring on an SR target for both 100-yard and 200-yard CMP Modern Military Games matches. And it’s fun to shoot!”
CMP Standard Modern Military Rifle (AR Class)
This rifle is built from carefully selected and fitted parts to conform to the CMP’s 7.5-pound weight limit iron-sighted rifle rule. Officially, this is a CMP Standard Modern Military Rifle, Class “A” (AR type).
1. S&W M&P lower receiver
2. White Oak Armament match upper receiver with 1/4×1/4-MOA pinned rear sights
3. AR-Stoner 20″ 1:7″-twist 5.56x45mm NATO Government contour barrel from MidwayUSA*
4. MidWest Industries ultralight free-float handguard with a Titanium barrel nut
5. Yankee Hill Machine folding front sight with a 0.072″ square front pin
6. RRA 2-stage trigger
7. A2 length buttstock
Easy Rifle Build Using Mostly Existing AR Parts, Plus New Barrel and Free-Float Handguard
Dennis was able to put his Modern Military AR together using components he had collected over the years: “Most of these parts were already in my bin of old AR parts available to be recycled. The barrel and free-float handguard were the only new acquisitions.” And with the AR’s modular format, this was an easy build: “Assembly time was about 30 minutes. I’ve done these parts swaps so many times now.”
Key Rules for Standard Modern Military Rifle (AR Type)
Dennis Santiago’s new AR rifle was built as a “Standard U.S. Modern Military Rifle”, Class A (AR Type), as specified in the CMP Competition Rules.
5.2.3 Standard U.S. Modern Military Rifles, Class A
Category A Standard Modern Military Rifles must comply with these requirements:
a) Rifles must be based on the M-16 rifle or be based on an AR design;
b) Rifles must be manufactured by a USA manufacturer;
c) Rifles must be equipped with issue-type metallic front and rear sights; rear sights with adjustments finer than one minute of angle are permitted;
d) Total rifle weight, with sights and without sling, may not exceed 7.5 pounds;
e) Rifles may be fitted with a float tube or free-floating handguard. A nonadjustable sling swivel may be attached to the forward end of the handguard; and…
f) The rifle must be chambered for the 5.56x45mm or .223 Remington cartridge.
Also, from Rule 5.2.2:
a) The exterior configuration of the rifle must be the similar to that of the
original military or military-type rifle;
b) The trigger pull may not be less than 4.5 lbs.;
Comments from other Modern Military Rifle Shooters:
“I built a Modern Military [Standard]. It was tough getting below the 7.5-lb [limit]. I had to carve off a bunch of the 20″ barrel diameter but wanted to stay with it for sight radius (over a 16″). I would just as soon shoot that little iron-sighted rifle at 200 yards as my 15-lb Nightforce-scoped Service Rifle. I love that little rifle.” — Kenneth S.
“I’m building one of these that will make 7.5-lb [Standard Modern Military] weight limit, with the long barrel and long sight radius. This has been on my list this winter.” — Tom K.
“We found that turning down a National Match barrel and taking a few inches off of it made a very accurate rifle.” — Jack A.
“My old (complete) A2 upper has been sitting forlorn on a shelf for a couple of years now. Perhaps I need to do a [Standard Modern Military] build of my own.” — Derek D.
Dennis Santiago replied: “Derek — that’s the reason I was attracted to this. I had bought a brand new WOA A2 pin upper receiver to make a new upper then the scope rule was adopted and it was all flat tops. This gives new purpose to the old parts.”
CMP Rules Defining Modern Military Rifles
Standard vs. Unlimited, Class A vs. Class B
There are actually two different classes of Standard Modern Military Rifles, Class A for AR-type rifles and Class B for other military-style rifles, such as the M1A and FN-FAL. Ok, got that? Now, in addition, there is also a second division for UNLIMITED Modern Military Rifles, again with two classes (Class A — AR-type and Class B — other military rifles). These unlimited rifles can have optics, heavier weights, modern-design adjustable-length stocks, and other upgrades. Here is Rule 5.2.2 from the current CMP Games Rifle and Pistol Competition Rules:
Sierra Bullets has released very complete load data for the popular 6.5 Creedmoor cartridge. This medium-sized cartridge has become one of the most popular chamberings for tactical and PRS shooters. The 6.5 Creedmoor combines excellent accuracy, good mag-feeding, good barrel life, moderate recoil, and reasonable component cost. That’s why this cartridge has caught on quickly.
Developed in 2007 by Dennis DeMille and Dave Emary, the 6.5 Creedmoor is a shortened and improved 30 TC cartridge case that was inspired by the .308 Winchester design. This short action design was created to maximize case capacity and a wide range of loading lengths, while still fitting in standard short action magazines. With the correct twist barrel, the versatile 6.5 Creedmoor can take advantage of the wide range of bullet weights available in 6.5 mm (i.e. .264 caliber). Reloaders should keep in mind that the 6.5 Creedmoor works best with medium to medium-slow powders such as H4350, Varget, Win 760, and RE-17. The light recoil and adaptability of the efficient 6.5 Creedmoor cartridge has already proven itself in high power, precision rifle series and benchrest competitions. Couple that with respectable barrel life and its intrinsic accuracy potential and you have a recipe for success which should insure its legacy for decades to come.
Here are three tables from the Sierra Bullets Reloading Manual (5th Edition). IMPORTANT — This is just a sample!! Sierra has load data for many other 6.5mm bullet types, including FB, Spitzer, SBT, HPBT, and Tipped MK from 85 grains to 142 grains. To view ALL 6.5 Creedmoor DATA, CLICK HERE.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
Two More Great 6.5 Creedmoor Reloading Resouces
Want More 6.5 Creedmoor Load Info? View Starline’s 6.5 Creedmoor Guide by Gavin Gear:
PRB 6mm Creedmoor and 6.5 Creedmoor Load Survey
The Precision Rifle Blog compiled Load Data from PRS Competitors, for both 6mm Creedmoor and 6.5 Creedmoor. This is a good place to start. PRB surveyed the match loads for “173 of the top-ranked precision rifle shooters in the country”. CLICK HERE.
A firearms magazine vendor, GunMagWarehouse (GMWH), has compiled one of the most comprehensive online guides to new-for-2021 guns and gear. If you are looking for new firearms and accessories this is a good place to start. You’ll find plenty of images plus videos showing important new rifles such as Savage’s new Straight-Pull Impulse, featured above.
One huge article showcases New Firearms (Rifles, Shotguns, Pistols) while another covers New Optics. You’ll find 30+ new pistols, 25+ new rifles, and 25+ New Optics, with photos and/or videos for each entry. Here are four highlights from the New Rifles section.
Savage Impulse Straight-Pull Rifle
Savage Arms has just introduced the new Impulse series of straight-pull bolt rifles. This is the first American-designed and crafted straight-pull centerfire rifle. The new Impulse features an innovative Hexlock bolt-locking mechanism with six spherical bearings that move radially outward into a ring in the barrel extension, thereby locking the bolt in place. That barrel extension is held in the receiver assembly by four cross-bolts on the lower front section. Ahead of the barrel extension is a conventional recoil lug and a familiar Savage barrel nut.
Savage Impulse Straight-Pull Rifle — Action Operation
Savage claims the new system offers the cycling speed of a semi-auto, with the accuracy of a bolt-action. There have been some initial field tests, and it looks like the performance has been good. However, based on the videos that Savage has posted, the cycling of the Impulse’s straight-pull bolt does not seem to be as smooth as some European straight-pulls, such as the Blaser R8, Merkel RX Helix, and Strasser RS 14.
Accuracy International AT-X Tactical Rifle
The new AI AT-X rifle is marketed as a PRS/NRL competition rifle, but it can also server admirably as a military sniper rifle. As teste, this AT-X is chambered in 6.5 Creedmoor and features a 24″ barrel with a 1:8″ twist. If the barreled action looks familiar, that’s because it’s the same proven action found on AI’s popular AT and AX models.
Uberti USA Courteney Lever Stalking Rifle
Uberti USA offers the 1885 Courteney Stalking Rifle. Named after the celebrated English hunter, explorer and naturalist Courteney Selous (1851-1917), this rifle gives today’s shooter the looks, feel, and usability of the turn-of-the-century British single-shots that were first taken to the British colonies—but at a fraction of the cost. The 1885 Courteney is built on the ultra-strong 1885 action. It is offered in 45/70 as well at the classic .303 British cartridge — the most used caliber in the British Empire. The action has a quarter-rib slotted for Weaver rings with a fully-adjustable shallow-V rear sight. It also comes with a traditional hooded ramp front sight and barrel-mounted sling-swivel.
Colt C20 Sniper Rifle for Canadian Military
Colt Canada’s C20, 7.62×51 NATO, Semi-Automatic Sniper Weapon was developed to support the Canadian Armed Forces (CAF) requirement for an Intermediate Sniper Weapon. The Canadian army will receive the new C20 sniper rifle in the 7.62 NATO caliber produced by Colt Canada to replace the C8 used by sniper teams. According to Canadian military sources, the new C20 should be more accurate and an improvement over the current C8 used by Canadian soldiers.
Here is a smart, innovative product for a defensive long gun that might be used at night. Virdian has combined a forearm handstop with a green laser. This product, the Viridian HS1 is unique — no other company currently offers a handstop laser. Viridian states: “The HS1 has a minimal footprint but adds exceptional control and targeting speed to M-Lok equipped rifles.” The handstop provides a convenient grip point in the bridge between thumb and fore-finger. The HS1 can be set so that the laser activates when the shooter’s support hand engages the HS1. Because it employs the popular M-Lok system, one can install the HS1 very quickly and move the HS1 fore and aft along a handguard with ease, to suit the user.
The HS1’s laser adjusts for windage and elevation. MSRP for the Viridian HS1 is $179.00. The HS1 is currently available through retailers, or on Viridian’s website.
“We were humbled by the initial demand for the HS1″, said Brian Hedeen, Virdidian President/CEO. “Our first run sold out instantly. The HS1’s intuitive design cuts down time-to-target. But it’s not just the addition of a laser — the hand stop adds … control and precision to rifles. And now they’re back in stock.”
Does your Black Rifle have a sloppy upper/lower fit? That can be annoying; what’s more, loose fit can limit accuracy potential. Here’s a clever solution for poor-fitting AR-15 and AR-10 upper and lower receivers. The new JP MicroFit takedown pins can improve even the sloppiest ARs, providing a rock-solid upper/lower receiver fit.
MicroFit pins come in three sizes and two types: standard (“mean”), oversized, and undersized, with types for both front and rear of the receivers. The mean pins match standard takedown pin sizes while the over- and under-sized vary by slightly more than .001″ (+/-) from the standard diameter. NOTE: Although most poor-fitting receivers are loose, some are too tight. Very tight receivers, such as post-Cerakote, can be remedied with the undersized pins.
Shown is JP Enterprises’ PSC-12™ upper assembly with LRP-07™ lower assembly.
“An AR with a loose upper/lower receiver… will not reach its accuracy potential. That was the goal with our original JP Tension Pin, but MicroFit™ pins provide the same result without tool-assisted takedown. The MicroFit pins require no modification to the receiver. They simply replace your current pins”, stated JP Enterprises founder John Paul.
JP’s MicroFit pins feature a polished black finish with a hard, durable QPQ coating. This provides smooth insertion/removal plus excellent corrosion resistance. All pins feature a two-faceted punch or bullet capturing recess. This allows the user to apply force to the pins safely without risking scratching the receiver. JP’s MicroFit pins are sold as both as individual pins and as replacement sets.
Our friend Gavin Gear of UlimateReloader.com got a chance to visit a SilencerCo dealer, The Range LLC in Yakima, WA. During his visit, Gavin was able to test a number of suppressors (aka “moderators” or “silencers”) for both rifle and pistols. Gavin has released a lengthy article covering his experiences. If you are in the market for a suppressor, we highly recommend you read Gavin’s SilencerCo Products Overview on UltimateReloader.com.
Gavin was able to test three SilencerCo suppressors: the Omega 300, the Hybrid, and the Osprey 45. In addition Gavin was able to handle the Maxim 9, an integrally suppressed 9mm handgun.
Gavin reports the Omega 300, which is rated up to .300 Winchester Magnum, is a very popular “can”. According to Gavin, the Omega 300 has become the best-selling rifle suppressor in history for important reasons. First, it has an integral muzzle brake. Second, it can work for multiple calibers, from .223 up to .308. Third, “It is very tough — .300 Win Mag rated, and full-auto rated”.
SilencerCo lineup, from left: Omega 300, Hybrid, Osprey 45
Gavin says the Hybrid Suppressor is an interesting concept: “One suppressor that you can configure for multiple calibers, both rifle and pistol. This includes the ability to change out the threaded mount on the muzzle end, and you can also swap out end caps that will optimize sound suppression for different calibers. The Hybrid… is full-auto rated, and can handle rifle cartridges up to and including .338 Lapua Magnum! But this suppressor can also be used for pistol applications…from 9mm up to 44 ACP.”
Vortex just released its new products for 2021. The stand-outs include new Rangefinding Binoculars with Applied Ballistics software, and four new tripods that should please hunters and tactical shooters. This 2021 lineup also includes two new prism scopes for the Spitfire line, and a solar-operated SPARC red dot sight. All of these new Vortex optics and tripods are available for pre-order now at EuroOptic.com.
Fury 5000 HD RangeFinder Binoculars with In-Display Ballistics
Vortex Fury HD 5000 AB Laser Rangefinding Binoculars
We’re excited to see Vortex’s new Bluetooth-compatible Fury HD 5000 AB rangefinding binoculars. The new 10x42mm Fury HD 5000 AB employs Applied Ballistics software to provide Ballistics solutions visible in the Binoculars. That’s an impressive feature. Vortex brags that the new Fury 5000 HD AB can “solve long-distance shooting with the push of a button”. These binoculars feature in-display wind/drop ballistics solutions, wind bearing (angle) capture mode, plus built-in environmental sensors.
In-display wind/drop solutions via integrated Applied Ballistics® Elite Solver
Pairs with Kestrel® wind meters and Applied Ballistics® Garmin® devices
Customize ballistic profiles via the Fury HD App
Fury HD 5000 AB, $1,999.99 MSRP ($1499.99 at EuroOptic)
New Vortex Tripods — Three Carbon Options
For 2021, Vortex offers four new tripods, three with low-mass, carbon-fiber legs. Prices start at $299.99 MSRP for the compact High Country II. The tall Ridgeview tripod ($649.99 MSRP) goes to full standing height. The top-of-the-line Radian Tripods are great for competition, providing a strong base for heavy PRS rigs. In addition there are a variety of tripod heads and accessories for these tripods.
Radian Carbon Tripod (Premium strength with versatile Ball or Leveling Head)
— Radian Carbon with Ball Head Tripod Kit — $1,199.99 MSRP ($899.99 at EuroOptic)
— Radian Carbon with Leveling Head Tripod Kit– $1,099.99 MSRP ($799.99 at EuroOptic”)
Ridgeview Carbon Tripod (extended height for standing) — $649.99 MSRP ($499.99 at EuroOptic)
Summit Carbon II Tripod (very compact, lightweight) — $549.99 MSRP ($399.99 at EuroOptic)
The SPARC SOLAR harnesses the sun for up to 150,000 hours of battery life, powering a reliable tactical machine that’s always ready.
Auto D-TEC Technology automatically switches from solar to battery power
Motion activation capable
Daylight bright 2 MOA red dot
$399.99 MSRP – SPARC SOLAR Red Dot
Spitfire™ HD Gen II 3x and 5x Prism Scopes.
Redesigned HD optical system cuts inches and ounces off the system.
HD Optical system
Ultra-compact and lightweight design
Purpose built AR-BDC4 reticle for 5.56 cartridges
$549.99 MSRP – Spitfire HD Gen II 3x Prism Scope
$649.99 MSRP – Spitfire HD Gen II 5x Prism Scope
Two-Stage vs. Single-Stage Triggers
Developed in 2007 by Dennis DeMille and Dave Emary, the 6.5 Creedmoor is a shortened and improved 30 TC cartridge case that was inspired by the .308 Winchester design. This short action design was created to maximize case capacity and a wide range of loading lengths, while still fitting in standard short action magazines. With the correct twist barrel, the versatile 6.5 Creedmoor can take advantage of the wide range of bullet weights available in 6.5 mm (i.e. .264 caliber). Reloaders should keep in mind that the 6.5 Creedmoor works best with medium to medium-slow powders such as H4350, Varget, Win 760, and RE-17. The light recoil and adaptability of the efficient 6.5 Creedmoor cartridge has already proven itself in high power, precision rifle series and benchrest competitions. Couple that with respectable barrel life and its intrinsic accuracy potential and you have a recipe for success which should insure its legacy for decades to come.
Viridian HS1 Features:
Vortex Fury HD 5000 AB Laser Rangefinding Binoculars
