Imagine if thousands of junior shooters, from all around the country, could somehow compete in one giant, mega-match hosted at hundreds of different locations, with the scores all tallied together? Juniors in Maine could compete with young marksmen in Montana, or Florida (or any of the other 50 states). Sound like a pipe dream? Well such a program really exists. It’s called the Civilian Marksmanship Program (CMP) Postal Match, a 10-meter, three-position air rifle competition.
The CMP Postal Match allows juniors from all 50 states to compete from the convenience of their home ranges. The top shooters later compete shoulder-to-shoulder at regional and national matches. The CMP Postal Match is open to all junior programs, including all JROTC, 4-H, Boy Scouts and junior clubs. Participants must be school age (not yet graduated from high school), and all team participants must be from the same school or club.
Here’s How the CMP Postal Match Works:
Shooters must register with the CMP before January 24, 2014.
Registered shooters will receive official CMP targets by mail ($5.00 per shooter).
Targets must be mailed back to CMP for scoring, to be received no later than 2/4/2013.
Some folks say you haven’t really mastered marksmanship unless you can hit a target when standing tall ‘on your own hind legs’. Of all the shooting positions, standing can be the most challenging because you have no horizontally-solid resting point for your forward arm/elbow. Here 10-time National High Power Champ Carl Bernosky explains how to make the standing shot.
Carl Bernosky is one of the greatest marksmen in history. The reigning 2012 National High Power Champion, Carl has won ten (10) National High Power Championships in his storied shooting career. In this article, Carl provides step-by-step strategies to help High Power shooters improve their standing scores. When Carl talks about standing techniques, shooters should listen. Among his peers, Carl is regard as one of the best, if not the best standing shooter in the game today. Carl rarely puts pen to paper, but he was kind enough to share his techniques with AccurateShooter.com’s readers.
If you are position shooter, or aspire to be one some day, read this article word for word, and then read it again. We guarantee you’ll learn some techniques (and strategies) that can improve your shooting and boost your scores. This stuff is gold folks, read and learn…
How to Shoot Standing by Carl Bernosky
Shooting consistently good standing stages is a matter of getting rounds down range, with thoughtfully-executed goals. But first, your hold will determine the success you will have.
1. Your hold has to be 10 Ring to shoot 10s. This means that there should be a reasonable amount of time (enough to get a shot off) that your sights are within your best hold. No attention should be paid to the sights when they are not in the middle — that’s wasted energy. My best hold is within 5 seconds after I first look though my sights. I’m ready to shoot the shot at that time. If the gun doesn’t stop, I don’t shoot. I start over.
2. The shot has to be executed with the gun sitting still within your hold. If the gun is moving, it’s most likely moving out, and you’ve missed the best part of your hold.
3. Recognizing that the gun is sitting still and within your hold will initiate you firing the shot. Lots of dry fire or live fire training will help you acquire awareness of the gun sitting still. It’s not subconscious to me, but it’s close.
4. Don’t disturb the gun when you shoot the shot. That being said, I don’t believe in using ball or dummy rounds with the object of being surprised when the shot goes off. I consciously shoot every shot. Sometimes there is a mistake and I over-hold. But the more I train the less of these I get. If I get a dud round my gun will dip.* I don’t believe you can learn to ignore recoil. You must be consistent in your reaction to it.
5. Know your hold and shoot within it. The best part of my hold is about 4 inches. When I get things rolling, I recognize a still gun within my hold and execute the shot. I train to do this every shot. Close 10s are acceptable. Mid-ring 10s are not. If my hold was 8 inches I would train the same way. Shoot the shot when it is still within the hold, and accept the occasional 9. But don’t accept the shots out of the hold.
6. Practice makes perfect. The number of rounds you put down range matter. I shudder to think the amount of rounds I’ve fired standing in my life, and it still takes a month of shooting standing before Perry to be in my comfort zone. That month before Perry I shoot about 2000 rounds standing, 22 shots at a time. It peaks me at just about the right time.
This summarizes what I believe it takes to shoot good standing stages. I hope it provides some insight, understanding, and a roadmap to your own success shooting standing.
— Good Shooting, Carl
* This is very noticeable to me when shooting pistol. I can shoot bullet holes at 25 yards, but if I’ve miscounted the rounds I’ve fired out of my magazine, my pistol will dip noticeably. So do the pistols of the best pistol shooters I’ve watched and shot with. One might call this a “jerk”, I call it “controlled aggressive execution”, executed consistently.
Ten bucks off an order of $25.00 or more? Now that’s a deal. Applied Ballistics LLC is making this limited-time one-week special offer as a way of thanking its Facebook followers. Bryan Litz explains: “To show our appreciation and celebrate reaching 2,500 likes, we are offering everyone $10 off your entire purchase of $25 or more. This offer is good today (November 4, 2013) through Sunday, November 10, 2013.” To get your onetime discount, simply enter offer Code ‘FBLike’ when shopping via the Applied Ballistics Webstore. NOTE: You do NOT need to be registered with Facebook to qualify for the ten-dollar discount. This deal is for everybody. Can’t complain about that.
Need .22 LR rimfire ammo? As of noon on November 4, 2013, Creedmoor Sports has 1100 boxes of SK 40-grain High Velocity HP ammunition (item #SK-HVHP) in stock. This is available in 50-count boxes or 500-count bricks, at a sale price of $8.95 per 50-round box or $83.95 per 500-round case. This is good ammo, suitable for club-level match shooting or general plinking use. If you have been searching high and low for rimfire ammo, you may want to jump on this before it’s all gone.
Technical Information
Caliber: .22 Long Rifle | Bullet Weight: 40 Grains | Bullet: Lead Hollow Point | MV: 1265 FPS
A year ago, SAAMI released an important video concerning ammo and fire. With professional fire-fighters standing by, over 400,000 rounds of ammo were incinerated in a series of eye-opening tests. If you haven’t had the chance to view this video yet, you should take the time to watch it now.
The Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI) has produced an amazing 25-minute video that shows what actually happens to sporting ammunition involved in a fire. This video shows the results of serious tests conducted with the assistance of professional fire crews. We strongly recommend you watch this video, all the way through. It dispels many myths, while demonstrating what really happens when ammunition is burned, dropped, or crushed.
Watch SAAMI Ammunition Testing Video
Video Timeline
2:10 Impact Test (ignited outside firearm)
3:40 65-foot Drop Test
5:08 Bullet Impact (.308 Win firing)
7:55 Blasting Cap Attacks
9:55 Bulldozer and Forklift Tests
12:20 Boxed Ammo Bonfire
15:37 Bonfire without Packaging
17:21 Retail Store Simulation Burn
20:55 Truck Trailer Burn
Over 400,000 rounds of ammunition were used in the tests. Some of the footage is quite remarkable. Testers built a bonfire with 28,000 rounds of boxed ammo soaked in diesel fuel. Then the testers loaded five pallets of ammo (250,000 rounds) in the back of a semi-truck, and torched it all using wood and paper fire-starting materials doused with diesel fuel.
The video shows that, when ammo boxes are set on fire, and ammunition does discharge, the bullet normally exits at low speed and low pressure. SAAMI states: “Smokeless powders must be confined to propel a projectile at high velocity. When not in a firearm, projectile velocities are extremely low.” At distances of 10 meters, bullets launched from “cooked-off” ammo would not penetrate the normal “turn-out gear” worn by fire-fighters.
We are not suggesting you disregard the risks of ammo “cooking off” in a fire, but you will learn the realities of the situation by watching the video. There are some amazing demonstrations — including a simulated retail store fire with 115,000 rounds of ammo in boxes. As cartridges cook off, it sounds like a battery of machine-guns, but projectiles did not penetrate the “store” walls, or even two layers of sheet-rock. The fire crew puts out the “store fire” easily in under 20 seconds, just using water.
Additional Testing: Drop Test, Projectile Test, Crush Test, Blasting Cap Test
Drop Test
The video also offers interesting ammo-handling tests. Boxes of ammo were dropped from a height of 65 feet. Only a tiny fraction of the cartridges discharged, and there was no chain-fire. SAAMI concludes: “When dropped from extreme heights (65 feet), sporting ammunition is unlikely to ignite. If a cartridge ignites, it does not propagate.”
Rifle Fire Test
SAAMI’s testers even tried to blow up boxes of ammunition with rifle fire. Boxes of loaded ammo were shot with .308 Win rounds from 65 yards. The video includes fascinating slow-motion footage showing rounds penetrating boxes of rifle cartridges, pistol ammo, and shotgun shells. Individual cartridges that were penetrated were destroyed, but adjacent cartridges suffered little damage, other than some powder leakage. SAAMI observed: “Most of the ammunition did not ignite. When a cartridge did ignite, there was no chain reaction.”
Bulldozer Crush Test
The test team also did an amazing “crush-test” using a Bulldozer. First boxes of loaded ammo, then loose piles of ammo, were crushed under the treads of a Bulldozer. A handful of rounds fired off, but again there was no chain-fire, and no large explosion. SAAMI observed: “Even in the most extreme conditions of compression and friction, sporting ammunition is unlikely to ignite. [If it does ignite when crushed] it does not propagate.”
Blasting Cap Test
Perhaps most amazingly, the testers were not able to get ammunition to chain-fire (detonate all at once), even when using blasting caps affixed directly to live primers. In the SAAMI test, a blasting cap was placed on the primer of a round housed in a large box of ammo. One cartridge ignited but the rest of the boxed ammo was relatively undamaged and there was no propagation.
Could you hit a 18″x24″ plate at 100 yards with a handgun? With a bit of practice, an experienced handgunner should be able to make that shot using a quality, full-sized pistol held two-handed. This editor has done it with a 1911 and a Sig P226. OK, now consider hitting that same-size plate at TWO hundred yards, with a 2″-barreled revolver, shot upside-down, one-handed, pulling the double-action trigger with your pinky finger. Sound crazy? Well that’s exactly what legendary wheelgunner Jerry Miculek does in this video. It’s hard to believe, but it’s all caught on camera for posterity.
As you can see in the video, Jerry was pretty excited when he makes the shot. That took some serious skill. Jerry was shooting a double-action-only Smith & Wesson 340 PD Scandium J-Frame (1.875″ barrel) with fixed sights. After making this amazing shot, Jerry explains: “Gun shoots a little right, so when you flip it over it shoots a little bit left.” Thanks Jerry — I’m not sure most of us would have figured that out.
Many folks struggle when they sight-in a scoped rifle for the first time. A very common mistake is clicking the turrets in the wrong direction. That’s frustrating and it wastes ammo. Another common problem occurs when people sight-in at a distance other than 100 yards. People sometimes struggle to figure out how many clicks they need to correct point of impact if they’re zeroing at 200, 250, or 300 yards.
To make the sight-in process more fool-proof, AccuScope has released two handy Apps for smart phone users. Whether used for initial sight-in or in-the-field adjustments, these smartphone Apps can get you zeroed quickly and reliably.
Using the Apps is easy. First, boresight the gun to get on paper. After the gun is fouled-in (so it is shooting normally) shoot a carefully aimed 3-shot group. Then go to the target and measure the vertical and horizontal distance from the 3-shot group center to your aiming point. Input those numbers into the App, along with your sight-in distance (from muzzle to target). The App then calculates exactly how many elevation and/or windage clicks you must crank into your scope to move point-of-impact to point of aim. Put in the specified clicks and then take a fourth shot to confirm your zero. The fourth shot should impact right on your point of aim (within the limits of the gun’s inherent accuracy.)
Given Murphy’s Law, a shooter can still mess things up if he inputs left clicks when the App calls for right clicks, or inputs down clicks when he needs up clicks. But as long as you look at the “R/L” and “Up/Down” labels on your turrets before spinning the knobs, you shouldn’t have any problems.
AccuScope is available in two versions, Standard and Premium. The $4.99 Standard version works for 1/4 MOA-click-value scopes. The $9.99 Premium version works with all scopes and any click values. The Premium version works with 1/8 MOA clicks, 1/4 MOA clicks, Metric clicks, or Milrad segment click values. So, if you have a scope with 1/8 MOA clicks, you’ll need the Premium version.
AccuScope iPhone Apps are available through Apple’s App Store: Standard | Premium
AccuScope Android Apps are available through the AppBrain Store: Standard and Premium
Editor’s Comment: Does this App really provide a solution you can’t figure out yourself with simple arithmetic? No, but some math-challenged guys may find that the App prevents errors. Additionally, following the step-by-step process used by the App will probably help some shooters avoid confusion, and avoid wasting ammo clicking in the wrong directions.
Note however, that there is an even simpler way to zero, if you have a very solid front and rear rest that will hold the gun absolutely steady while you click. After bore-sighting, fire a couple rounds (with the same point of aim). Then place the rifle so the center of the cross-hairs is exactly on your original point of aim. Next, without disturbing the gun in any way, dial your turrets so that the center of the cross-hair moves over the center of your group. That’s it. You’re now zeroed (though you may want to repeat the process for confirmation). Again, this only works if the gun doesn’t shift one bit when you’re clicking. Having a helper steady the gun as you click the turrets will make this “no-math” method work more effectively.
Click-to-Initial POI Zeroing Method Demonstrated
Product Tip by EdLongrange. We welcome reader submissions.
The last primary lead smelter facility in the United States will be closing soon. The Doe Run Company smelter in Herculaneum, Missouri has been operating since 1892. The facility will be closed permanently under pressure from the EPA. According to MSNBC.com: “Doe Run Co. was ordered by the EPA to install new pollution control technologies needed to reduce sulfur dioxide and lead emissions as required by the Clean Air Act. The company will instead close its lead smelter.”
Doe Run started life in 1864 as the St. Joseph Lead Company, better known as St. Joe, which started lead mining on a small scale in southeastern Missouri. In 1892 it started up its smelter in Herculaneum, where all smelting was consolidated in 1920.
Cause for Concern? Our readers have been concerned that the closure of the Doe Run smelter will lead to serious shortages in raw materials for bullet-making. Readers fear that bullet-makers won’t be able to source lead, and so the output of bullets and ammo would be reduced. Curtailed bullet production would lead to higher prices, it is feared.
As it turns out, the situation is not as dire as it seems. At least one bullet-maker says the Doe Run smelter closure will have no immediate effect on its raw material supply chain.
Sierra Bullets Responds: Lead Smelter Closure Should Not Cause Supply Shortage
Addressing the issue of supply shortages, Sierra Bullets posted a notice in the Sierra Blog on November 1, 2013. Sierra Bullets Plant Engineer Darren Leskiw stated that the Doe Run smelter closure should create no problems for his company because it uses only recycled lead:
We have had many customers contact us about the closing of the last primary lead smelting facility in the USA. This facility is operated by Doe Run and is located in Herculaneum, Missouri and is just about a 3-hour drive from our facility in Sedalia, Missouri.
The main question asked is “Will this shut down your supply of lead?” The answer to that is no. First, Sierra buys lead from several different vendors to maintain constant supply. Second, this facility only smelts primary lead or lead ore. This is lead ore that has just been brought out of the earth. Sierra uses no primary lead at all and never has, so we use nothing directly from this facility. The lead we buy from Doe Run comes from their recycling facility in Boss, MO that is about 90 miles away from the smelter that is closing.
The facility we buy from is still going strong and delivering to us as scheduled. The lead from this facility is from recycled lead, mostly coming from car batteries. This is a continuing “in and out” cycle for them and the smelter closing will not affect this facility.
Our supply should not be in jeopardy and we do not anticipate any changes in our supply chain at this time. Could the lack of primary lead create a little more demand for recycled lead? Sure, but how much is unknown. Could this increase in demand also create an increase in price? Sure, but again, by how much is unknown at this time.
There are many other primary lead smelters in the world and so the flow of primary lead will not be shut off. Where there is a need for primary lead, I am sure there will be a salesman more than happy to pick up the business. In short, we do not see any reason for alarm. We expect our supply to continue and keep feeding our production lines which are still running 24 hours per day to return our inventory levels to where they should be.
Lead Smelting Operations Have Moved to Mexico
Posting on SnipersHide.com, one industry insider says shooters should not be overly concerned about the Doe Run shut-down, because smelting is still being done in nearby Mexico:
“The lead industry has been transitioning out of the United States for over a decade now. 85% of the lead smelting industry capacity migrated over the Mexican border where there are [fewer environmental regulations]. The remainder of production capacity will be online and running by the third quarter of 2014. There has been no production disruption to speak of in obtaining lead or lead products. The auto battery industry among others has prepared for this eventuality for some time….
The last lead smelter closing in December did not have enough capacity to supply even 10% of the battery industry much less the ammunition industry. The lead being used in ammunition today hasn’t been coming from the United States for years already. The closing of that plant will not have any appreciable effect on lead availability at all. There is a great deal of lead processed here being extruded, made into shot, converted to wire, etc., but the smelting operation is only one part of the production process.”
By popular request, this story has been reprinted from 2011.
Forum member Al Nyhus is a top-level score shooter who has competed successfully with the 30BR cartridge in VFS (Varmint for Score) matches. Al has been working on an “improved” 30 BR cartridge that delivers extra velocity. Al’s 30 BRX cartridge is inspired by the 6mm BRX cartridge, popular in 600-yard benchrest and across-the-course competition. The 6mm BRX cartridge maintains the same sidewall profile and shoulder angle as the parent 6mmBR case. Likewise, the 30 BRX retains the 30° shoulder used on the popular 30 BR cartridge.
Al reports: “Thought you might like to see what I’ll be working with in my VFS gun this season. It’s a true 30 BRX — a 30 BR with the shoulder moved forward 0.100″ with the standard BR shoulder angle. Stan Ware of SGR Custom Rifles built one last season for Steve Grosvenor and I was really impressed by the performance of Steve’s gun. The 30 BR barrel on my VFS gun needed replacing, so the new 30 BRX got the nod.”
30 BRX Delivers 150-200 FPS More Velocity than 30 BR
Al’s testing shows the 30 BRX gives a solid 150-200 fps speed gain over the 30 BR at the top, while needing just 2.5-3.0 more grains of Hodgdon H4198 to do so. A 30 BR case holds on average 40.8 grains of water, while the 30 BRX holds 42.3 grains (roughly 4% more). So the 30 BRX delivers a 7% increase in velocity with a mere 4% increase in H20 capacity. That’s pretty good efficiency. [Editor’s Note: Assuming 34 grains of H4198 is a typical 30BR match load, Al’s increase of 2.5-3.0 grains for the 30BRX represents roughly a 7.5-8.5% increase in actual powder burned. That explains the higher velocities.]
Why did Nyhus decide to try an “improved” 30 BR? Al explains: “The 30 BRX was created to operate at a [higher] velocity level than can be achieved with the standard 30BR case, while at the same time keeping the easy-tuning characteristics of the standard 30BR case. We also wanted to use the same powders currently used with the 30BR and maintain similar operating pressures.” Is the 30BRX harder to shoot because of the increased velocity? Al doesn’t think so: “In a 13.5-lb HV gun, the 30 BRX case is a pleasure to shoot with just a flea bite of recoil.”
Will the 30 BRX Replace the 30 BR in Score Competition?
The 30 BR is already an exceptionally accurate cartridge that dominates short-range Benchrest for Score competition. Will the 30 BRX make the standard 30 BR obsolete? Nyhus doesn’t think so. However, Al believes the 30 BRX offers a small but important edge in some situations: “On any given day, it’s the shooter that hits the flags best and makes the fewest mistakes that ends up on top. No amount of velocity will save you when you press the trigger at the wrong time. Missing a switch or angle change at 200 yards that results in 3/4″ of bullet displacement on the target can’t be compensated for with another 200 fps. That’s the hard fact of benchrest shooting. But on those days when, as Randy Robinett says, ‘our brains are working’, the BRX may offer enough of an advantage to turn a close-but-no-cigar 10 into an ‘X’ at 200 yards. Or turn a just-over-the-line 9 into a beggar 10.” Given the fierce competition in Score matches, an extra 10 or another X can make the difference between a podium finish and also-ran status.
Remember “Spring Forward, Fall Back?” Well it’s time to set your clocks (and watches) back to standard time. Daylight Saving Time officially ends at 2:00 a.m. on Sunday, November 3, 2013. That gives us back the extra hour we lost in the spring of this year.
So if you set your clocks and watches back when you go to bed this evening, you’ll get an extra hour to sleep-in. If you’re curious, the “Spring Forward/Fall Back” system we use today was adopted because of WWI energy shortages. According to Time Magazine: “The practice wasn’t formally implemented until World War I, when countries at war started setting their clocks back to save on coal. Daylight Saving was repealed during peacetime, and then revived again during World War II. More than 70 countries currently practice Daylight Saving Time, because they think it saves money on electricity (in the U.S., Arizona and Hawaii have opted out).”