Many online vendors are running sales this Labor Day Holiday weekend. You’ll find score of products marked way down, plus discount codes that can save you 15% or more on your purchases. Some sales run through end-of-day (11:59 pm) on Monday September 2nd, while other Labor Day sales extend into next week. Be sure to check the sale schedules.
Brownells Labor Day Sale — 15% Off Plus Sale Pricing
Save now with Brownell’s Labor Day Sale which is already underway. You get 15% Off with Code LD15, plus there is special SALE Pricing on a vast selection of popular products. Act soon because the deals/discount ends Monday, September 2, 2024 at 11:59 pm CDT.
Sportsman’s Guide — Big Discounts and $50 Off $250+ Orders
For Labor Day weekend at Sportsman’s Guide there are 60% savings on select shooting accessories, 50% savings on some hunting gear, and 40% savings on select ammunition. In addition, you can get $50 off orders of $250 or more with coupon CODE SG4088. NOTE this coupon offer expires Sunday, September 1, 2024, the day BEFORE Labor Day. Also the discount code does NOT work with firearms and ammunition.
Bruno’s — No HazMat + $15 Shipping w/ $250 Powder/Primers
Need primers or reloading powder? Right you can get powder and or primers delivered for just $15 with FREE HazMat (that can save you up to $70 on HazMat and shipping). To qualify you must purchase at least $250 worth of powder and/or primers at Bruno Shooters Supply. In addition, right now Bruno’s is offering $100 off BAT, Kelbly, and Stiller actions that are currently in stock (online purchases only).
Midsouth — FREE HazMat OR Free Shipping Through 9/2/2024
Midsouth is running a Labor Day Weekend Special for orders of $99 or more. With code LD24HE you can get FREE HazMat. OR with code LD24SE you can get FREE Shipping. Again, please note, there is a minimum order. For An Order To Qualify For FREE Shipping (LD24SE) the order must include at least $99 of in-stock items up to 49 pounds in total weight. If order weight exceeds 50 lbs, shipping charges will be added. To get FREE Haz-Mat (LD24HE) the order must include at least $99 of in-stock HazMat items up to 49 pounds. This offer applies to lower 48 states only. Offers cannot be combined and the offers will NOT apply to backorders. These offers end 09/02/24 at 11:59pm CST.
Primary Arms Labor Day Sale — Major Discounts
Primary Arms is running a huge Labor Day Sale, with major brand discounts such as 15% off Eotech and Bonus Bucks on Vortex products. There are also major savings on thousands of products in stock. For example the Anderson A4 Lower is marked down from $233.69 to $94.99, a CMC AR Trigger is marked down from $174.00 to $99.99, and a Primary Arms Shooting mat is marked down from $49.99 to $19.99. This is a big sale, with new items appearing every few hours.
Sportsman’s WH — Big Savings on Hunting & Camping Gear
Right now Sportsman’s Warehouse is running a huge Labor Day Sale with all product types on sale. You’ll find big savings on tents, camping gear, backpacks, optics, outdoor clothing, boots and more. In addition, there are discounts on firearms and ammunition. Shown above are just a few of the notable deals. You can up to 40% during this sale. NOTE: Some of the “Hot Buys” expire on Monday 9/2/24.
Precision Reloading — 10% Off Order or $8 Shipping Promo
Precision Reloading has a dual-option promotion for Labor Day weekend. First you can get 10% OFF your order with Code 19224. Or you can use code 89224 to get flat-rate $8.00 shipping. If you are planning a significant purchase, say over $120.00, then take the 10% OFF deal. If you are purchasing a heavy item, or plan a relatively low-cost order, then it may be wise to take the shipping discount. Both these offers are good through 11:59 pm CT on 9/3/2024. These promotions “cannot be used on previous orders, sale items, or with any other offers.”
Creedmoor Sports — FREE Shipping on Orders $145+
Now through mid-day on Tuesday, Creedmoor Sports is providing FREE Ground Shipping on orders of $145.00 or more. NOTE: This is a limited-time offer through 12:00 pm (noon) on Tuesday 9/3/2024. Some exclusions apply: ammunition, tumbler media, plastic beads, portable air gun ranges, firearms, air rifles, and posters. Also all drop-shipped items (including all Giraud and Gracey products, CTK products, Big Shot Tumblers) are exempt.
BONUS: MidwayUSA Camo Tuesday on 9/3/2024
On Tuesday, September 3, 2024, MidwayUSA will run its big Camo Tuesday™ Sale, with major discounts and FREE SHIPPING on select hunting gear. “With the arrival of hunting season, it’s finally time for one of our biggest sales of the year, Camo Tuesday,” said Adam Augustine, VP of eCommerce. MidwayUSA offers camouflage clothing for sale, as well as packs, hunting boots, ammunition, optics and more. CLICK HERE to preview Camo Tuesday™ offerings.
Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
When Only the Best Will Do…
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
KEY FEATURES: Ballistics Solver, GPS Tagging, Weather Forecast, Field Notes with Photos
Hunters, here’s a great FREE mobile APP for both Apple and Android systems. The ZEISS Hunting App offers many practical functions: full-featured ballistics calculator, field notes with photo archive, compass function, GPS tagging for documentation of hunting experiences, and a detailed weather forecast service. The Hunting App is offered as a FREE download for Android and iOS (iPhone/iPad) mobile devices.
Three Minute Video Explains Zeiss Hunting App Features:
The Zeiss Hunting App integrates multiple useful features — ballistics solver, compass, GPS tagging, hunt history. The “Field Notes” function can record a wide variety of info — you can save photos, record your shots and hits, log animal sightings during the hunt, and even plot game locations on a map. Zeiss explains: “This allows users to optimally record events, the game population in the hunting territory, and their own hunting experiences.” Shots can be tagged via GPS through the shooter’s and the target’s position, and then displayed on a map. The Field Notes hunt diary shows all entries in chronological order.
Full-Featured Ballistics Solver
The integrated ballistic calculator allows hunters to easily customize the settings to suit their favorite cartridges. You can enter your own data, or choose bullet/cartridge info from a database containing over 7000 ammunition types from a variety of manufacturers. The ballistics solver can be programmed for for current weather conditions (temp/humidity), and the angle (inclination) of the shot.
Weather Functions
The weather tool offers a Five-Day Forecast, and you can choose multiple locations. In addition to the current location, users can also display the weather for their hunting areas of choice. The weather forecast includes temperature, precipitation, wind direction, wind speed, humidity, and air pressure. (Note: For precise ballistics solutions, you must input the ACTUAL conditions at your shooting location).
This video explains how to define a hunting zone and set GPS location tags on the map:
Hunt Log and Photos
The Field Notes function can do many things. You can log all your shots and hits, and you can plot game sightings during the hunt. Events can be augmented with photos and GPS data. With the Field Notes mapping function, you can even locate game populations in the hunting territory. A compass and automatic night mode round off the list of smart features.
The U.S. Army Marksmanship Unit published a series of reloading “how-to” articles on the USAMU Facebook page. A while back the USAMU’s reloading gurus looked at the subject of cartridge run-out and what can be done to produce straighter ammo. Tasked with producing thousands of rounds of ammo for team members, the USAMU’s reloading staff has developed smart methods for improving concentricity, even with budget-priced dies. For other hand-loading tips, visit the USAMU Facebook page.
Minimizing Runout with Standard Seating Dies
This USAMU article explains how to set up standard bullet seating dies dies to minimize Total Indicated Run-out (TIR). The loading process is described using a single-stage press since most handloaders have one. A high-quality run-out gauge is essential for obtaining consistent, accurate results.
Having sized, primed, and charged our brass, the next step is bullet seating. Many approaches are possible; one that works well follows. When setting up a standard seating die, insert a sized, trimmed case into the shellholder and fully raise the press ram. Next, back the seating stem out and screw the die down until the internal crimping shoulder touches the case mouth.
Back the die out ¼ turn from this setting to prevent cartridge crimping. Next, lower the press ram and remove the case. Place a piece of flat steel (or window glass, which is quite flat) on the shellholder and carefully raise the ram.
Place tension on the die bottom with the flat steel on the shellholder. This helps center the die in the press threads. Check this by gently moving the die until it is well-centered. Keeping light tension on the die via the press ram, secure the die lock ring. If one were using a match style, micrometer-type seating die, the next step would be simple: run a charged case with bullet on top into the die and screw the seating stem down to obtain correct cartridge OAL.
However, with standard dies, an additional step can be helpful. When the die has a loosely-threaded seating stem, set the correct seating depth but don’t tighten the stem’s lock nut. Leave a loaded cartridge fully raised into the die to center the seating stem in the die. Then, secure the stem’s lock nut. Next, load sample cartridges and check them to verify good concentricity.
One can also experiment with variations such as letting the seating stem float slightly in the die to self-center, while keeping correct OAL. The run-out gauge will show any effects of changes upon concentricity. However, this method has produced excellent, practical results as evidenced by the experiment cited previously. These results (TIR Study 2) will reproduced below for the reader’s convenience.
First, however, let’s examine run-out figures of some factory-loaded match ammunition. This should give readers who are new to TIR gauges some perspective about the TIR ranges one might encounter.
TIR Study 1: 50 rounds Lake City M852 Match 7.62mm
(168 gr. Sierra MatchKings)
0.000” – 0.001” = 2%
0.001” – 0.002” = 30%
0.002” – 0.003” = 16%
0.003” – 0.004” = 22%
0.004” – 0.005” = 14%
0.005” – 0.006” = 14%
0.006” – 0.007” = 0%
0.007” – 0.008” = 2%
TIR Study 2: 50 rounds of .308 match ammo loaded using carefully-adjusted standard dies, vs. 50 using expensive “Match” dies from the same maker.
Standard dies, TIR:
0.000” — 0.001” = 52%;
0.001”– 0.002” = 40%;
0.002”– 0.003” = 8%.
None greater than 0.003”.
Note: both samples were loaded using the O-Ring method, i.e. with a rubber O-Ring placed under the locking ring of the Full-length sizing die to allow that die to float.
These tips are intended to help shooters obtain the best results from inexpensive, standard loading dies. Especially when using cases previously fired in a concentric chamber, as was done above, top-quality match dies and brass can easily yield ammo with virtually *no* runout, given careful handloading.
When neck-turning cases, it’s a good idea to extend the cut slightly below the neck-shoulder junction. This helps keep neck tension more uniform after repeated firings, by preventing a build-up of brass where the neck meets the shoulder. One of our Forum members, Craig from Ireland, a self-declared “neck-turning novice”, was having some problems turning brass for his 20 Tactical cases. He was correctly attempting to continue the cut slightly past the neck-shoulder junction, but he was concerned that brass was being removed too far down the shoulder.
Craig writes: “Everywhere I have read about neck turning, [it says] you need to cut slightly into the neck/shoulder junction to stop doughnutting. I completely understand this but I cant seem to get my neck-turning tool set-up to just touch the neck/shoulder junction. It either just doesn’t touch [the shoulder] or cuts nearly the whole shoulder and that just looks very messy. No matter how I adjust the mandrel to set how far down the neck it cuts, it either doesn’t touch it or it cuts far too much. I think it may relate to the bevel on the cutter in my neck-turning tool…”
Looking at Craig’s pictures, we’d agree that he didn’t need to cut so far down into the shoulder. There is a simple solution for this situation. Craig is using a neck-turning tool with a rather shallow cutter bevel angle. This 20-degree angle is set up as “universal geometry” that will work with any shoulder angle. Unfortunately, as you work the cutter down the neck, a shallow angled-cutter tip such as this will remove brass fairly far down. You only want to extend the cut about 1/32 of an inch past the neck-shoulder junction. This is enough to eliminate brass build-up at the base of the neck that can cause doughnuts to form.
The answer here is simply to use a cutter tip with a wider angle — 30 to 40 degrees. The cutter for the K&M neck-turning tool (above) has a shorter bevel that better matches a 30° shoulder. There is also a 40° tip available. PMA Tool and 21st Century Shooting also offer carbide cutters with a variety of bevel angles to exactly match your case shoulder angle*. WalkerTexasRanger reports: “I went to a 40-degree cutter head just to address this same issue, and I have been much happier with the results. The 40-degree heads are available from Sinclair Int’l for $15 or so.” Forum Member CBonner concurs: “I had the same problem with my 7WSM… The 40-degree cutter was the answer.” Below is Sinclair’s 40° Cutter for its NT-series neck-turning tools. Item NT3140, this 40° Cutter sells for $14.99. For the same price, Sinclair also sells the conventional 30° Cutter, item NT3100.
Al Nyhus has another clever solution: “The best way I’ve found to get around this problem is to get an extra shell holder and face it off .020-.025 and then run the cases into the sizing die. This will push the shoulder back .020-.025. Then you neck turn down to the ‘new’ neck/shoulder junction and simply stop there. Fireforming the cases by seating the bullets hard into the lands will blow the shoulder forward and the extra neck length you turned by having the shoulder set back will now be blended perfectly into the shoulder. The results are a case that perfectly fits the chamber and zero donuts.”
The NRL Precision Hunter Challenge features a multi-distance, walk-around shooting course similar in some ways to PRS/NRL, but limitations on weight and cost of equipment make this more affordable and more practical. This relatively new discipline is part of a series of very popular NRL Hunter events held around the nation. There were 24 NRL Hunter matches this year, culminating in the NRL Hunter Grand Slam held August 9-11 in Decorah, Iowa. CLICK HERE for NRL Hunter match information.
Shooting USA SHOW TIMES on Outdoor Channel:
The 2023 Hornady NRL Hunter Challenge is featured this week on Shooting USA television. This Shooting USA Episode airs Wednesday, August 28, 2024 at 9:00 PM Eastern and Pacific; 8:00 PM Central on the Outdoor Channel. If you miss the regular broadcast, you can stream the show online on Vimeo for $0.99 per episode.
121 Shooters from all over the country competed in 23 challenging stages with both animal shapes and conventional square/diamond targets. The course of fire consisted of 160+ rounds with hiking between stages at the North Springs Shooting Complex. The Precision Hunter Challenge featured target distances from 200-850 yards, and angled shots between 0-10°. At the North Springs Shooting Complex, there were natural terrain obstacles and tree stands. Competitors had to navigate the terrain to establish their shooting positions — very much the opposite of a benchrest match.
This event is an opportunity to work on hunting situation shots, where hunters may expect natural terrain obstacles and thick cedars to navigate around and find shooting positions.
“The NRL HUNTER Series is designed to help educate new and seasoned hunters about their skills, gear, and personal limitations. The Hornady Precision Hunter Challenge did just that!” said Travis Ishida, President of the NRL. “With a well-designed course of fire that was both challenging and fun, this match encompassed everything we are looking for…” he added. Along with Hornady, notable sponsors included Kestrel, Magnetospeed, ThunderBeast Arms, SIG Sauer, Leupold, Vortex, Nightforce, Savage, Seekins Precision and many other companies.
This video features highlights from the 2022 Hornady Precision Hunter Challenge:
Make sure your firearms are stored securely. The NSSF’s Gun Storage Check Week runs September 1-7, 2024. This national awareness campaign is intended to ensure gun owners store their firearms securely, both to prevent theft and to reduce the risk of misuse and suicide.
Secure firearm storage is the most effective way to help prevent firearm accidents, suicides, and theft. Many secure storage options are available, including lock boxes, cable locks, and full-size safes, to secure firearms when not in use in homes and vehicles. When firearms are not under your direct control, you should place them in locked storage. We recommend large, heavy gun safes for rifle and shotgun storage. It’s best to buy a larger, heavier gun safe than you may think you need initially. We recommend your read our Gun Safe Buyers Guide.
We can do more to help prevent firearm-related accidents, suicides and thefts. During Gun Storage Check Week you should review storage practices and make changes, as needed, to prevent unauthorized access. “No one wants their gun in the hands of an unsupervised child, a person in crisis, an individual who lacks knowledge of safely operating firearms or a thief”, says Joe Bartozzi, President and CEO of NSSF.
Opportunity to WIN a FREE Hornady Lock Box
Those who visit GunStorageCheck.org will have the opportunity to win one of many Lock Boxes donated by Hornady. The NSSF will award gun safe prizes not only during September 1-7 but each week during the month of September during National Suicide Prevention Month.
The National Rifle Association of America (NRA) has retained former United States Solicitor General Noel Francisco to lead the Association’s legal efforts against public officials who weaponized government against the NRA and its members. Mr. Francisco served as the 47th Solicitor General of the United States from 2017 to 2020 and is Partner-in-Charge of the Washington D.C. Office of the Jones Day law firm.
“I am pleased to announce that the NRA has engaged with Mr. Francisco and Jones Day to represent the NRA and our millions of members as we conclude this important legal matter,” said Doug Hamlin, NRA Exec. Vice President & CEO. “Mr. Francisco is well regarded in the legal community and served at the highest levels in our federal government. A strong advocate for Constitutional freedoms, Mr. Francisco will be a trusted voice for NRA members in the courtroom.”
Mr. Francisco’s retention comes at a pivotal time when the NRA seeks to hold government officials accountable for actions that violated the Association’s right to free speech. In May of this year, with the assistance of the American Civil Liberties Union (ACLU) and Eugene Volokh, a UCLA Law School professor, the United States Supreme Court issued a unanimous ruling in the landmark NRA v. Vullo First Amendment case.
The Court decided that the NRA had properly stated a claim that actions taken by Ms. Vullo to coerce banks and insurers to stop doing business with the Association suppressed NRA’s pro-Second Amendment speech. The case will now continue, with the NRA seeking monetary damages.
“The Supreme Court rightly decided that government agencies cannot be permitted to be weaponized against the American people,” continued Hamlin. “I have full confidence in Mr. Francisco’s ability to litigate and look forward to a successful conclusion to this legal fight.”
IMR 8208 XBR powder is a great propellent that has shown superb consistency, delivering great accuracy and low ES/SD in our testing. We have used this powder with success in .308 Win and other cartridges. The burn rate is slightly slower than Vihtavuori N133 and a bit faster than Hodgdon H4895. IMR 8208 XBR is suitable for many cartridge types including .204 Ruger, 22 BR, .223 Rem, 6 PPC, 6BR (lighter bullets), and .308 Winchester. It works great for varmint hunting loads as well as benchrest competition.
If Powder Valley sells out, Natchez Shooting & Outdoors also has some IMR 8208 XBR one-pounders in stock. Current price is $51.69 (one-pound). Also Brownell’s has 8208 XBR one-pounders in stock for $55.99. NOTE: Neither Natchez nor Brownells have the 8-lb jugs of IMR 8208 XBR.
Stellar Accuracy and Exceptional Temperature Insensitivity
Field testing has shown that IMR XBR 8208 is extremely stable across a very wide temperature range. At SHOT Show 2010, we interviewed Chris Hodgdon, who gave us the “inside story” on this IMR powder. Chris shared lab test results showing how load pressure varied with ambient temperature. The data was stunning. Basically 8208 XBR showed almost constant pressures from below freezing to well over 100° F. This editor has personally never seen a powder test that revealed “flat-line” results like 8208 XBR, with recorded pressures remaining virtually unchanged over a huge temperature range. And IMR 8208 XBR has been used with great success in benchrest competition by Lou Murdica and others. When you combine its temp stability with such proven accuracy, IMR 8208 XBR is indeed a very exceptional powder.
We like Lyman’s Electronic Digital Trigger Pull Gauge, which is faster and more precise than the previous model. The latest Lyman Pull Gauge measures trigger pull weights from 1 ounce to 12 pounds with resolution of 0.1 ounces (2.8 grams). It features an adjustable, 4-position rod which retracts into the gauge body. We think that anyone running match triggers below 2.5 pounds pull weight should have a gauge like this. Among the pull gauges on the market, we think the Lyman unit offers great performance for the price.
Features: More Precise Strain Gauge | Improved Grip Shape | Adjustable Rod Lengths
Lyman’s Electronic Digital Trigger Pull Gauge is designed to be the fastest and most accurate trigger pull gauge available. State-of-the-art strain gauge technology allows for repeatable accuracy of 1/10 ounce (2.8 grams). The gauge features a large, easy-to-read LCD display and you can switch from ounces to grams with the push of a button. The gauge can also deliver a pull weight average of the last 10 readings. That’s very helpful, particularly when working with factory triggers that may not be very consistent.
The Lyman Trigger Pull Gauge features a solid, collapsible rod with four locking positions. Being able to adjust length makes it easier to use the gauge with a wide variety of firearms — pistols, rifles, and shotguns. The locking feature prevents the rod from flexing when applying pressure to the trigger. When not in use, the rod conveniently collapses into the gauge body, making the whole unit more compact. The new Trigger Pull Gauge comes in an internally-padded plastic case that can be easily stored in a drawer or on your work bench.
When neck-turning cases, it’s a good idea to extend the cut slightly below the neck-shoulder junction. This helps keep neck tension more uniform after repeated firings, by preventing a build-up of brass where the neck meets the shoulder. One of our Forum members, Craig from Ireland, a self-declared “neck-turning novice”, was having some problems turning brass for his 20 Tactical cases. He was correctly attempting to continue the cut slightly past the neck-shoulder junction, but he was concerned that brass was being removed too far down the shoulder.
IMR 8208 XBR powder is a great propellent that has shown superb consistency, delivering great accuracy and low ES/SD in our testing. We have used this powder with success in .308 Win and other cartridges. The burn rate is slightly slower than Vihtavuori N133 and a bit faster than Hodgdon H4895. IMR 8208 XBR is suitable for many cartridge types including .204 Ruger, 22 BR, .223 Rem, 6 PPC, 6BR (lighter bullets), and .308 Winchester. It works great for varmint hunting loads as well as benchrest competition.
