Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









March 5th, 2011

Winchester Recalls .223 Rem 64gr Power-Point Ammunition

Win Ammo .223 RecallWinchester recently issued an important product safety notice, recalling certain lots of Winchester 64gr Power-Point .223 Rem ammo. According to The Firearm Blog, “catastrophic failures destroyed a number of law enforcement AR15 type rifles.” That Blog cited LEO agency notices describing guns that suffered cracked uppers and bowed lowers after firing Winchester’s 64gr Power-Point .223 Rem ammo. Rifles built by three different manufacturers (Colt, Bushmaster, and Stag Arms), all sustained similar damage. Below is Winchester’s Recall Notice dated 3/1/2011:

PRODUCT WARNING AND RECALL NOTICE
WINCHESTER® RANGER® LAW ENFORCEMENT 223 Remington 64 Grain Power-Point®

Olin Corporation, through its Winchester Division, is recalling six (6) lots of its RANGER® 223 Remington 64 Grain Power-Point® (PP) centerfire rifle ammunition (Symbol Number RA223R2).

Lot Numbers (last four characters): DK01, DK11, DK21, DK31, DK41, and DK51

Through extensive evaluation Winchester has determined the above lots of RANGER® Law Enforcement ammunition may contain incorrect propellant. Incorrect propellant in this ammunition may cause firearm damage, rendering the firearm inoperable, and subject the shooter or bystanders to a risk of serious personal injury when fired.

DO NOT USE WINCHESTER® RANGER® 223 REMINGTON 64 GRAIN POWER-POINT® AMMUNITION THAT HAS A LOT NUMBER ENDING IN DK01, DK11, DK21, DK31, DK41 or DK51. The ammunition Lot Number is ink stamped inside the right tuck flap of the 20-round carton, as indicated here:

To determine if your ammunition is subject to this notice, review the Lot Number. If the last four characters of the Lot Number are DK01, DK11, DK21, DK31, DK41 or DK51 immediately discontinue use and contact Winchester toll-free at 866-423-5224 to arrange for replacement ammunition and free UPS pick-up of the recalled ammunition.

This notice applies only to RANGER® 223 Remington 64 Grain Power-Point® centerfire rifle ammunition with lot numbers ending in DK01, DK11, DK21, DK31, DK41, and DK51. Other Symbol Numbers or Lot Numbers are not subject to this recall.

If you have any questions concerning this RANGER® Law Enforcement ammunition recall please call toll-free 866-423-5224, write to Winchester (600 Powder Mill Road, East Alton, IL 62024 Attn: RA223R2 Recall), or visit our website at www.winchester.com.

Permalink News 2 Comments »
March 5th, 2011

New Smith & Wesson Governor Revolver is Triple Threat

If you’re looking for a versatile carry revolver, consider the new Smith & Wesson Governor, introduced at the 2011 SHOT Show. The six-shot Governor will chamber three types of ammo: .45 ACP, .45 Long Colt, and .410ga 2.5″ shotshells.

Smith & Wesson Governor RevolverThe ability to chamber shotshells makes this piece more useful as a “trail gun” that can put down snakes and other threats that are difficult to hit quickly with a pistol round. If you choose, you can load a mix of shotshells and regular cartridges. The 29.6 oz. Governor has a Scandium frame with blackened stainless cylinder. The basic model ($679.00 MSRP) comes standard with a Tritium dot front sight. There is also a more expensive ($899.00 MSRP) version with a Crimson Trace grip with built-in laser. A button in the grip activates the laser.

This Editor personally likes the shape and feel of the laser grip better than the standard grip. The laser grip (shown in the slideshow below) lets you position your hand up higher on the frame for better control, and it has a smoother profile. The laser obviously offers an advantage in low-light situations. We think, if you can afford the laser version, that’s the smart choice.

CLICK HERE for more photos showing both standard and Laser grips and open cylinder.

Permalink Gear Review, New Product Post comment »
March 4th, 2011

Ransom Rifle Master ‘SL Mega Rest’ — Review Part One

Ransom recently introduced the Ransom Rifle Master ‘SL Mega Rest’, a large, modular rest system for FSCA, NBRSA, and IBS shooters and other shooting disciplines that allow a rest system. We persuaded accomplished NBRSA point blank and long range shooter John Crawford to check out this system and share his experiences. This article is Part One of a two-part series.

Ransom’s SL Mega Rest: Part One (First Impressions) by John Crawford

Ransom SL Mega Rest

Upon receiving the Ransom SL Mega Rest, the first thing I noticed was how well the rest was packaged. There were two boxes, a large box holding the two base plates and a small box holding all of the small parts for the rest. The large box is double-walled, cardboard construction. It held up well to the rigors of shipping, keeping the two rest halves, each in their own inner box, in perfect shape.

Unpacking the Ransom SL Mega Rest one could not help but notice the weight of each half and their very attractive, black, Rhino coating. [Rhino coating is a heavy, extremely durable and tough, textured polyurethane coating commonly sprayed in the bed area of pickup trucks to protect the bed from damage.] Unpacking the small parts, which were all packaged separately for protection, gave me a good chance to note their excellent fit and finish. The small parts are made of steel and have a black oxide finish, including the ½:20-threaded legs which have nicely knurled knobs and lock rings. The black oxide finish compliments the bases.

Ransom SL Mega Rest

Front Section
The front base and post, used exclusively for elevation adjustment, are well built and have some very nice features. The post, which is 1.25″ in diameter, has a keyway and key in the front to keep it from turning, and the lockdown bolt has a carbide ball in the end to lock the post in place. The mariner’s wheel has a cogged rubber belt on the outside (fits into a groove) and makes adjusting height easy and comfortable without hand slippage. The post assembly can be located, front-to-rear, in one inch increments, to provide a center-of-front-rest-base-to-center-of-rear-rest-base distance of from 24″ to 32″, thus accommodating an 8″ difference in stock length.

The Ransom SL Mega Rest’s elevation rest top is a modular system. The base for the rest top broke tradition and has two bolts, side by side, to hold it to the post, a welcome change from having a single bolt to hold the top on. With two bolts you reduce the stress when putting a heavy rifle on the rest. The front post is mounted to a plate that bolts down to the rest base. The rest base has a series of tapped holes that allows one to adjust the front rest location, front-to-rear, to fit different stock lengths.

Ransom SL Mega RestRear Section
The rear rest, used exclusively for windage adjustment, has the rest top holder bolted in place. As a modular system, you can put the elevation rest top bag holder or windage top bag holder in either the front or rear rest as needed. You could also have a few different elevation rest tops or windage tops for different rifles. Both front and rear rests have a bubble level.

The Ransom SL Mega Rest’s windage top and bag holder are also modular. You can put the windage top and bag holder, or just the bag holder, in either the front or rear rest by removing four thumb screws and changing the tops. You can buy different width rest tops and swap them out in a few minutes, a nice feature for different stock length and width configurations. The windage top has a dovetail fit with a center bolt to hold the top in place and has no perceivable side play or movement, nice and tight and the windage adjusts easily.

The forearm stop is well thought out and fully adjustable for height and length to accommodate different front bag heights and stock lengths/positions. It can be adjusted forward about 4″ and, in height, from 1-1/2″ to 3-1/2″. It easily adjusts with two thumb screws.

83 pounds of Steel Solidity
The bridge plate between the front and rear rests is also black Rhino-coated, matching the bases. There are four dowel pins in the bridge plate for alignment and six 5/16-18 bolts that securely hold the bridge plate in place. The rest can be shot with the bridge plate in place, as a one-piece rest system, or the bridge plate can be removed, making it a two-piece rest system.

Ransom SL Mega Rest

The rear rest with windage top weighs 38 pounds and the front rest weighs 45 pounds, for a total weight of 83 pounds. This is without sand bags or sand. Overall the all-steel-construction, Ransom SL Mega Rest is well thought out, nicely finished, and made to the standards and quality you would expect from the Ransom Company. The MSRP for the whole unit (everything except sand bags) is $1,330.00. This includes front heavy bag plate, and rear windage-adjustable bag plate. Additional plates (for different sized bags) start at about $90.00. Next step is to fill my sand bags and do some field testing. We’ll cover that in Part Two of this review, later this spring.

Test Arranged by Edlongrange.
Permalink Gear Review, New Product 2 Comments »
March 4th, 2011

The People Who Make Black Hills Ammo — Video Profile

Black Hills AmmunitionBlack Hills Ammunition has released a video showing the production process at Black Hills’ ammo plant in Rapid City, South Dakota. As you’d expect there is footage showing the assembly-line, with massive machines churning out loaded cases (look for the bullet seating machine). But this video has a second, softer side — it also focuses on the human factor at the Black Hills facility.

Black Hills President Jeff Hoffman narrates the video, which profiles some of the key production staff at Black Hills. There’s AJ the ‘gearhead’, who supervises the production process, making sure all the machinery is running optimally. When AJ’s not at the plant, he’s tinkering with his hot rods. Then there’s JB, the loading machine operator, who arrives each day at the crack of dawn and can’t wait to get to his machine. And there’s Laverne, who, for 22 years, has been Black Hills’ ace ammo inspector. The video provides an insight into the human side of the production process. We think you’ll enjoy watching.

YouTube Preview Image
Permalink - Videos, News 3 Comments »
March 4th, 2011

Spring Promo Savings at Sinclair Int’l

Sinclair International is running a Spring Promo right now. You can get $20.00 off an order of $200.00 (or more), or $25.00 off an order of $250.00 (or more). Think about it — a couple boxes of Lapua brass and a couple boxes of bullets and you’ll qualify. But take note: this Promo only runs March 4 through March 6 — Friday (today), Saturday, and Sunday. So act quick if you want to save. For the $20 off deal use promo code CMN; for the $25 off deal use promo code CFR.

Story Sourced by Edlongrange.
Permalink Hot Deals Post comment »
March 3rd, 2011

Free Winchester Ballistics App for iPhone

Yet another ballistics App is now available for the iPhone and iPod. iPhone users can download the new Winchester Ballistics App for free. Winchester has taken the features and functionality from its web-based Ballistics Calculator and developed a user-friendly interface for the iPhone. Winchester’s free online ballistics calculator is still available.

The iPhone version of Winchester’s Ballistics Calculator allows users to choose their type of ammunition and compare up to three different Winchester products with easy-to-read, high-tech ballistic charts and graphs. You can customize shooting conditions by entering wind speed and outside temperature, adjust zero marks for sighting in.

To get the free Winchester App, visit the Winchester Ballistics webpage, and click on the photo of an iPhone on the right side of the screen. You will need to have iTunes configured on your computer to download the Winchester App.

Recommended $9.99 ‘Ballistic’ App
While you’re at the iPhones store, you probably want to download the ‘Ballistic’ App by Jonathan Zdziarski. Powered by the JBM Ballistics engine, the $9.99 ‘Ballistic’ App is recommended by Bryan Litz, and it is one of the most sophisticated solvers available. A new $19.99 iPad version of ‘Ballistic’ has just been introduced.

Permalink New Product Post comment »
March 3rd, 2011

2012 Olympic Shooting Schedule — Tickets On Sale March 15th

The complete events schedule for the 2012 London Olympics has been released. Shooting events will take place at the Royal Artillery Barracks near Woolwich. Shooting competition starts with 10m Air Pistol on July 28 and finishes with the Mens 3-Position Finals and Trap Finals on August 6.

Olympic tickets (for all sports) go on sale starting March 15, 2011. Don’t delay if you want to grab tickets for the Shooting Finals. U.S. residents can purchase tickets through CoSport.com, while UK residents can get tickets from the London2012.com official website.

Download 2012 Olympic Shooting Schedule (with ticket prices) PDF

Olympic shooting event schedule

Permalink Competition, News 2 Comments »
March 2nd, 2011

NRA Rule Now Permits Scoped Service Rifles at High Power Championships

A new NRA rule now permits shooters with scope-equipped M1, M1A, and AR-platform rifles to compete in Service Rifle matches at the National Championships. As of January 1, 2011, under NRA Rule 3.1(f), as amended, scoped service rifles are allowed: “Same as Service Rifle Rule 3.1 (a) through (d) except there is no restriction as to sights”. This gives you a chance to compete with your AR or M1A in the largest rifle match in America, even if you don’t shoot iron sights. Scoped service rifles, presumably, will be scored in a separate classification. We have learned that the scoped ARs will be placed in a subcategory for Tactical Match Rifles with Optics.

High Power Optical Sights

Starting this year at the High Power Rifle Championships in Camp Perry, Ohio, Service Rifle competitors who wish to use optical sights can now compete in a Special Award Category within Match 401. For those using an AR platform rifle, you’ll be part of the Tactical Match Rifle with Optical Sights Special Awards Category within Match 402.

“Our hope is to get more people out to local ranges and the National Championships with their scope-equipped ARs”, said Competitive Shooting Division Director Mike Krei. “More than two million AR platforms have been sold and we would like to see these gun owners come out and compete.” It is unclear how this rule change will affect local or regional High Power matches. Some folks have suggested that most local High Power Service Rifle matches will still be limited to iron-sights rifles unless the course of fire expressly allows for optical sights.

Story based on report by Lars Dalseide, Courtesy the NRA Blog.
Permalink Competition, News 8 Comments »
March 2nd, 2011

New Hi-Vel and Lead-Free Rimfire Ammo from Winchester

Winchester is producing four new types of rimfire ammunition for 2011. Three of the four products should be of great interest to varminters, with new high velocity, high expansion, and lead-free designs. Winchester is also introducing its M-22 bulk pack .22LR ammo, designed for use in mag-fed semi-autos.

Varmint HV in .22 Magnum Rimfire
SPECS: 30gr tipped V-Max bullet, 2250 FPS
The Winchester Varmint HV line of .22 WMR ammo has proven very popular, and this year Winchester adds a new version for varminters who prefer a plastic-tipped bullet. The latest Varmint HV round features the accurate and explosive 30gr V-Max bullet. With a V-Max loaded to an impressive 2250 fps, this gives you near 17HMR velocity, with a heavier bullet for added hitting power.

Varmint HV V-Max

Varmint HE 3-in-1 Segmented .22LR
SPECS: 37gr plated HP, 1435 FPS
The unique 3-in-1 segment design, exclusive to Winchester, features a 37gr plated HP fragmenting expansion bullet pushed at 1435 fps. This “progammed” hollow-point bullet fragments into three forward segments, plus a solid rear core that gives more penetration (and energy). “Without a doubt, Varmint HE ammunition provides explosive impact,” said Brett Flaugher, Winchester’s Marketing VP. “The 3/1 segmenting design makes this product truly innovative, but unlike other high-energy bullets on the market, our new 3/1 fragmenting design allows initial impact shock, and deep penetration resulting in maximum terminal effect.”

Winchester Varmint HE

Varmint LF (Lead-Free) 17 HMR
SPECS: 15.5gr NXT tipped lead-free bullet, 2550 FPS
For 2011, Winchester is introducing a new 17HMR version of its popular Lead-Free (LF) rimfire ammo. The new 17HMR LF shoots a lightweight, 15.5gr tipped NXT bullet at a blistering 2550 fps, making this some of the highest-velocity rimfire ammo you can buy. Along with the new 17MHR LF, Winchester’s LF rimfire line includes lead-free .22 WMR and .22LR LF ammo.

Varmint HV V-Max

M-22 Ammo for .22LR Tactical Trainers
SPECS: 40gr, Blackened Copper-plated Lead Bullet, 1255 FPS
New this year is Winchester’s M-22 line of affordable .22LR ammo. This is designed to function well in large-capacity stick magazines. If you are shooting one of the .22LR tactical-style semi-autos such as Smith & Wesson’s MP15-22, this ammo would be a good choice. It features a blackened, copper-plated 40gr lead bullet, and is available in 1000-count bulk packs.

Winchester Product Demo Page

NOTE: To watch video, use scroll bars to move to right, then click on “VIDEOS” in top red navigation bar. Or, CLICK HERE to view page in new window.

Permalink Bullets, Brass, Ammo, Hunting/Varminting, New Product Post comment »
March 1st, 2011

New AR-Comp Powder from Alliant — Details Revealed

AR-Comp Alliant PowderHere’s the latest info on Alliant’s new AR-Comp powder. We had a chance to talk with Dick Quesenberry of Alliant, who revealed more details about this new propellant. First, Dick explained that AR-Comp is an advanced re-formulation of Reloder 15, a double-base Bofors powder. There are changes to internal and external chemistry to provide much better pressure/velocity stability across a wide range of temperatures.

AR-Comp Offers Uniform Velocities over a Wide Temp Range
Tests were done with .223 Rem and .308 Win ammo, loaded with AR-Comp and maintained at temps from -20° F to +160° F in a controlled test center. The ammo itself was heated or cooled to targeted temps before testing. Across that entire range of temperature, -20° F to +160° F, the ammo loaded with AR-Comp showed a variation of only 20 fps in muzzle velocity. The primary bullet type tested was a 77gr .224 bullet and the secondary was a 175gr .308 bullet.

Burn Rate Like Varget: Though this is a reformulation of Reloder 15, the burn rate of AR-Comp is slightly faster than Reloder 15. Alliant told us: “Reloder 15 is slightly slower, in burn rate, than Varget. The new AR-Comp, with the enhancements, ended up slightly faster than Reloder 15, so it is now very close to Varget in burn rate”. This is the result of the “tuning” of the powder to be much less temp-sensitive.

Meters Like Reloder 15: AR-Comp is a small-kernel, double-base extruded powder like Reloder 15, so it will continue to meter just like Reloder 15. The load density should be the same as Reloder 15.

Loaded Ammo: We asked if any manufacturer will be using AR-Comp in loaded ammo. Dick told us that he is “not allowed to release that information at this time”. Draw your own conclusions, but remember that Alliant is owned by ATK, which makes Federal rifle ammo.

Available in Summer 2011: Allliant hopes to ship AR-Comp in “June or July” of 2011, provided the DOT Classification process moves at a normal schedule. The powder is ready to go, Alliant is just waiting on the DOT to provide shipping authorization.

Reloder 15 Will Stay in Production: Fans of Alliant’s Reloder 15 don’t need to worry. Alliant will keep Reloder 15 in production. “We don’t drop powder lines”, said Quesenberry.

AR-Comp First in Series of New Alliant Temp-Stable Powders
Alliant has been working on AR-Comp for quite some time. This represents a major evolution for Alliant’s powder line. AR-Comp will be the first in a series of “new generation” temp-stable powders from Alliant. Quesenberry noted: “Our goal was to provide a powder that offers stable pressures in all temperatures. Shooters want to be able to stay with the same load in winter and in summer, in cold or in hot conditions.”

Quesenberry added: “We’ve been working on this quite a while. AR-Comp is the first example and we hope to extend this to other rifle powders. It’s a tough job. You have to balance the performance carefully. If you tweak it one way, say to improve the low temp performance, you lose something at the upper end. If you tweak it for the top end, you loose something at the bottom. You have to hit that balance. We worked very hard to do just that and we think shooters will be impressed with the results.”

Permalink Bullets, Brass, Ammo, New Product Post comment »