In recognition of Father’s Day, Savage Arms launched a rebate program for its Axis and Axis II rifles. You can SAVE $75.00 on Savage Axis and Axis II purchases made between 6/1/2024 and 7/31/2024. So there are 21 more days (3 weeks) to take advantage of this promotion. DEADLINE for mail-in or online submission is 8/31/2024.
Savage Axis and Axis II rifles are a reliable, budget-priced rigs for hunting/varminting. These rifles are currently offered in a variety of configurations, starting at $429.00 MSRP. Both right-hand and left-hand actions are offered, with both polymer and wood stocks in a variety of colors, including many camo options. NOTE: The XP models include a mounted and boresighted 3-9x40mm optic. That makes the Axis XP and Axis II XP very affordable ready-to-go options for hunters.
Savage currently offers 39 Axis and Axis II model rifles. There are many choices of stock colors and the Axis XP and Axis II XP models come with a mounted scope. Here are 7 popular Savage Axis and Axis II models. CLICK HERE to see ALL 39 current offerings.
What is Parallax?
Parallax is the apparent movement of the scope’s reticle (cross-hairs) in relation to the target as the shooter moves his eye across the exit pupil of the riflescope. This is caused by the target and the reticle being located in different focal planes.
Here’s a good explanation of scope parallax. This video has been watched over 790,000 times.
Why is it Important?
The greater the distance to the target and magnification of the optic, the greater the parallax error becomes. Especially at longer distances, significant sighting error can result if parallax is not removed.
How to Remove Parallax
This Nightforce Tech Tip video quickly shows how to remove parallax on your riflescope.
While keeping the rifle still and looking through the riflescope, a slight nod of the head up and down will quickly determine if parallax is present. To remove parallax, start with the adjustment mechanism on infinity and rotate until the reticle remains stationary in relation to the target regardless of head movement. If parallax has been eliminated, the reticle will remain stationary in relation to the target regardless of eye placement behind the optic.
Most bolt-action rifle shooters work the bolt with their trigger-pulling hand. This is because most rifles sold to right-handed shooters come with right-side bolts, while “lefty” rifles come with left-side bolts. This “standard” configuration requires the shooter to take his dominant, trigger-pulling hand off the stock to cycle the bolt, then re-position his hand on the stock, and “re-claim” the trigger. Often the shooter must lift or move his head to work the bolt, and that also requires him to re-establish his cheek weld after each and every shot. Not good.
This really doesn’t make much sense for precision shooting with fore-end support*. There is a better way. If you leave your trigger hand in position and work the bolt (and feed rounds) with the opposite hand, then you don’t need to shift grip and head position with each shot. All this requires is a weakside-placed bolt, i.e. a left bolt for a right-handed shooter or a right bolt for a left-handed shooter. The video below shows a “Lefty” working a right bolt. Note how efficient this is:
As our friend Boyd Allen explains: “If you think about it, if you are going to work with a factory action where your options are left bolt and left port or right bolt and right port, and you are building a rifle that will only be shot from a rest, using the left/left for a RH shooter or using a right/right for a LH shooter works better than the conventional configuration”.
Shoot Like a Champ and Work the Bolt with Your Weakside Hand
Derek Rodgers is a recent F-TR World Champion, a King of 2 Miles champion, AND is the only person to have won BOTH the U.S. F-Open and the U.S. F-TR National Championships.
And guess what? Derek runs this kind of “opposite” bolt set-up. Yep, Derek shoots right-handed with a left bolt. Though Derek is a right-hander, he shoots with a Left Bolt/Left Port (LBLP) action. He pulls the trigger with his right index finger, while working the left-side bolt with his left (weakside) hand. This allows him to stay in position, and maintain his cheekweld. He places his right hand on the grip, while manipulating the bolt (and feeding rounds) with his non-trigger-pulling hand.
Past F-TR World Champion and Past King of 2 Miles Derek Rodgers
This is the rifle with which Derek won the 2013 F-TR National Championship.
*For true standing, off-hand shooting (whether in competition or on a hunt), a conventional strongside bolt placement makes sense, since the non-dominant arm must support the front of the rifle all the time. When shooting from bipod or rest, it’s a different story.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. EuroOptic — Sako S20 Hunter, 6.5 PRC, $999.99
⏺ Excellent hunting rifle now with $699 price reduction
Need a quality deer rifle with outstanding accuracy and reliability — plus a great factory trigger and a smooth-running action? Consider the Sako S20 Hunter. Chambered in the popular 6.5 PRC with a 24″ barrel, this Sako S20 rifle is $999.99 on sale — a $699.01 discount from the original $1699.00 list price. Along with the 6.5 PRC other chamberings are available with this close-out sale: 6.5 Creedmoor, .30-06 Springfield, and .300 Win Magnum. NOTE: This rifle can accept a Sako S20 Precision stock for target shooting, so you can have two rifles in one.
2. Graf & Sons — Leupold Optics Sale and $200 VX-5HD Savings
⏺ Great savings — Up to 30% on scopes, spotters, and more
Leupold produces a wide variety of quality optics, most made-in-USA. With the current Leupold Optics Sale at Graf’s you can save on riflescopes, spotting scopes, and rangefinders. Leupold SX-2 spotting scopes are $100 Off. The Leupold RX-1400i Rangefinder is now just $159.99 (20% OFF). You can also save $200 on VX-5HD rifle scopes from a 1-5x24mm to a 4-20x52mm. This $200 savings is built into the price at Graf’s and other participating dealers and is offered through 7/13/2024. CLICK Here for Leupold Deal details.
3. Bullet Central — Bix’N Andy Dakota Trigger Sale
⏺ Save 20% on fine adjustable triggers for popular action types
If you’re looking for a new trigger check out the Bix’N Andy Dakota Trigger Line. With a crisp, adjustable trigger pull from 14 oz. to 4.4 lbs. and options for many popular action types, Bix’N Andy Dakota triggers work great for everything from Hunting rigs to F-Class and ELR rifles. Right now save 20% on Dakota triggers with code FCDAKOTA20.
4. Creedmoor Sports — Berger Bullet Sale
⏺ Significant discounts on very popular, top-quality Berger bullets
We’re in the heart of competition season and if you’re needing more bullets check out the Berger Bullet Sale over at Creedmoor sports. There’s a wide range of bullet calibers and weights on sale, with savings up to 20%. For example, the popular 180gr 7mm Match Hybrid target bullets are marked down from $76.95 to $61.95 per hundred/ That’s a $15 discount, nearly 20%.
5. Midsouth — Unix Large Rifle Primers Case of 5000, $499.99
⏺ If you need Large Rifle Primers, this is a good option given current shortages
Quality large rifle primers have been hard to find recently. But Midsouth has obtained a big shipment of good quality Unis Ginex Large Rifle Primers. Get 5000 primers for only $499.99 — that’s $100.00 per thousand, a very decent price these days. European-made Ginex Primers are made to high standards good materials and consistent quality. NOTE: Powder Valley also has these same quality Unis Ginex LR Primers for a few dollar less — $494.99 for 5000-ct case.
6. Amazon — Birchwood Casey Auto-Reset Plates with Plate Rack and Folding Target Stand, $148.50
⏺ Good high-quality steel, with three self-resetting 6″ plates
For a shooting experience you can see and hear, shoot the Birchwood Casey Spring Target Plates with Rack. These auto-resetting Steel targets use springs to auto-reset after impacts. The 6″-diameter target plates are 3/8″ thick AR500 steel which makes them extremely rugged. All metal components feature a durable powder-coated finish. This 3-target plate rack system features a folding target stand for easy transport.
Here’s a double-duty gun vise that serves both for maintenance chores and for shooting at the range. The Hyskore Cleaning and Sighting Vise can hold your rifle for repairs and maintenance while it can also serve as a shooting rest for sight-in sessions. This Hyskore Vise is fully adjustable for any length gun. It offers precision elevation adjustment with 4-point leveling and an adjustable fore-end support. This vise is constructed from welded steel with a powder coat finish.
⏺ Very useful product — buy one caliber gauge or multi-caliber kit
Proper neck tension is critical for precision loading. These Burstfire Neck Tension Case Mouth Gauges accurately measure the exact diameter inside the necks of your cases, ensuring consistent and precise neck tension. You can get a single caliber gauge plus handle for just $24.87 on Amazon. There are seven caliber options. If you shoot multiple calibers, we recommend the full Burstfire gauge kit which includes handle, carry case, and inserts for SEVEN calibers: .224, .243 (6mm), .264, .277, .284 (7mm), .308, and .338. The full kit costs $83.87 on Amazon, a good deal compared to other neck gauge kits on the market.
9. Amazon — The ABCs of Reloading, 10th Edition, $17.54
⏺ Excellent, comprehensive reloading resource at bargain price
Now in its 10th edition, the ABCs of Reloading is a well-respected print resource for persons getting starting in hand-loading. This latest edition covers all the key steps in reloading — case prep, case body sizing, powder dispensing, bullet seating, and measuring loaded rounds. The book also explains how to select and adjust dies, and it reviews popular presses, die options, and reloading tools. This excellent resource is now just $17.54 at Amazon, a 47% savings.
⏺ Great price for 100 targets good for sight-in and load development
Here are quality printed paper targets, useful for Sight-In, Load Development, and Precision Practice. Right now you can get 100 of these red/white grid Redfield Precision Sight-In Targets for just $11.98 at CDNN. That price — just 12 cents per target — is a bargain! A 10-pack of this same target is $4.49 on Amazon.
——————– As an Amazon affiliate, this site can earn revenues through sales commissions.
The 2024 CMP National Matches at Camp Perry officially commence Thursday, July 11, 2024. The summer schedule concludes Saturday, August 10 with the Palma Match and awards. Click the links below to register for events at the 2024 National Matches. View other event info on the CMP website.
The National Matches is comprised of the CMP National Trophy Pistol and Rifle Matches, National Games Matches, National Smallbore Matches, National Air Gun Championships, and the National Mid-Range and Long Range Matches. Along with the competitions, the National Matches includes a variety of training clinics for all experience levels. The CMP will also run a sales center where accessories and ammo can be purchased. CLICK HERE to review the 2024 National Matches schedule and event info on the CMP website.
CMP 2024 National Matches Calendar
The 2024 CMP National Matches at Camp Perry Run Thursday, July 11, 2024 through Saturday, August 10, 2024. Here is the full CMP schedule (CLICK to ZOOM to see details in online spreadsheet):
NOTE: This CMP Calendar is hosted online in spreadsheet format. This allows you to increase display size, and also to search for specific words. CLICK HERE to view full spreadsheet calendar.
For today’s Sunday GunDay story we offer a short history of the legendary .50 BMG cartridge, tips on loading, and some fun photos from FCSA matches in the Western USA.
Fans of Heavy Artillery should visit Fifty Caliber Shooters Association (FCSA) website. There you’ll find range maps, photo collections and animated slide-shows On the FCSA photo gallery page, you’ll find a map. Click on any gray range link to see images from that venue. There are also a series of articles covering FCSA competition along with the “care and feeding” of the big 50-caliber rifles.
About the .50 BMG Cartridge
The .50 Browning Machine Gun (.50 BMG, aka 12.7×99mm NATO or 50 Browning) is a cartridge developed for the Browning .50 caliber machine gun in the late 1910s, entering official service in 1921. Under STANAG 4383, it is a standard cartridge for NATO forces as well as many non-NATO countries.
John Browning had the idea for this round during World War I in response to a need for an anti-aircraft weapon, based on a scaled-up .30-06 Springfield design, used in a machine gun based on a scaled-up M1919/M1917 design that Browning had initially developed around 1900. According to the American Rifleman: “The Browning .50 originated in the Great War. American interest in an armor-piercing cartridge was influenced by the marginal French 11 mm design, prompting U.S. Army Ordnance officers to consult Browning. They wanted a heavy projectile at 2700 FPS, but the ammunition did not exist. Browning pondered the situation and, according to his son John, replied, ‘Well, the cartridge sounds pretty good to start. You make up some cartridges and we’ll do some shooting’.”
Are you a died-in-the-wool .50 BMG fan? Got a hankerin’ for heavy artillery? Then visit the FCSA Photo Gallery page. There you’ll find hundreds of photos from Fifty Caliber Shooting Association (FCSA) matches and 50 Cal fun shoots in eleven states plus Australia, Switzerland, and the United Kingdom. To access the photos from the Gallery Page, start by selecting a shooting club and state with the brown buttons. After selecting the location, then click on the colored buttons for the event date.
Photo sets go all the way back to 2002, so you can see the evolution of the hardware over the years. Sample multiple archives to see the differences in terrain from one range to another — from Raton’s alpine setting to the hot, dry Nevada desert. This Gallery is really a treasure-trove of .50-Cal history. Here are a few sample images.
Reloading Powder and Special Tools for .50 BMG
Alliant’s Powder for 50-Caliber Applications
In 2009 Alliant unveiled Reloder 50, a slow-burn-rate powder designed primarily for long-range, .50-caliber rifle shooters. According to Alliant, the burn rate is “a little slower than Winchester 860″ and the powder is showing excellent lot-to-lot consistency. Load density is optimized for the 50 BMG and similar cases. Like Reloder 17, Reloder 50 employs a process which penetrates the kernels with the burn-rate-controlling chemical. This should allow a longer, flatter pressure curve, yielding more velocity than conventional powders can deliver. Alliant says that Reloder 50 offers “superior velocity and the ability to burn cleaner (with less residue)”. Reloder 50 comes in both 1-lb (#150527) and 8-lb (#150528) containers.
Forster and Lyman .50 BMG Trimmers
Big Fifty enthusiasts asked for a dedicated .50 BMG case trimmer, so Forster and Lyman created .50 Cal trimmers specifically for that cartridge. The cutter tip on the Forster .50 BMG Case Trimmer is much sharper than the cutter on the Lyman 50 Cal AccuTrimmer. However, with the Forster tool you will pay more for that superior cutting ability — the Forster .50 BMG trimmer is $125.18 at Precision Reloading compared to $85.21 on Amazon for the Lyman .50 BMG trimmer. Our advice is go ahead and pay the extra money for the Forster — the cutter head is much sharper, and we prefer the Forster’s collet-style case-holder. The Forster gets the job done more quickly, with less effort. NOTE: Grab the Forster while you can — we believe Forster has halted production (but it is still in stock at Precision Reloading and some other vendors).
Giraud .50 BMG Case/Bullet Comparator Giraud Tool makes a comparator for 50-Cal cartridges. The double-ended comparator is quite versatile. In one orientation you can measure base-to-ogive bullet length and also measure cartridge OAL from rim to bullet ogive. When reversed, you can use the comparator to measure cartridge headspace. The $33.00 Giraud .50 BMG Comparator gauge is constructed of 303 stainless and fits most any vernier, dial, or digital caliper. CLICK HERE for more info.
Here is an important safety reminder for readers who employ hand priming tools with trays of multiple primers. In this instance a primer detonated while being seating in a pistol cartridge case. This caused a “flash-over” which instantly ignited multiple other primers in the tray. That, in turn, caused a small explosion which broke the tray and Hornady Handheld Priming Tool. The user, a Forum member, reported this in our Shooters’ Forum in 2021.
Report by Forum Member about Primer Flash-Over Incident
I had a small scare the other day while reloading. My experience might be a helpful reminder to people to keep safe and follow proper procedures and not be sloppy.
A primer popped (went off) when being seated and (while hot) flashed over into the tray causing other primers in the tray to detonate. That, in turn, broke my Hornady Handheld Priming Tool and injured my hand.
Here is my loading area after the incident. Note the damage to the hand priming tool. I’m not not sure where the rest of the pieces are.
Injuries to User — Multiple Cuts on Hand and Forearm
This photo shows the resulting cuts to hand. Fortunately they seem superficial. Note — I was wearing latex gloves so my hand had some protection.
The blast also blew my glasses off my face and they landed about six feet away. Be careful folks and wear your eye protection! EDITOR: Guys — This is yet more compelling evidence why handloaders should always wear eye protection!
More Details — Primers Were Federal LP, Case Primer Pockets Had Been Checked
The forum member noted: “Just in case people are interested, I didn’t notice anything different from usual. Cases were Privi Partizan (PPU) factory brass on their fourth firing. The primers were Federal Large Pistol. The cases had been ultrasonic cleaned and the primer pockets checked prior to priming. I had primed around 50 cases during this session before the accident.”
Here is a close-up of “flashed” primers — note the empty but dented cups and triangular “anvils”:
Two other Forum members reported feeding issues with this particular Hornady handheld priming tool and one other member, Kiwi Greg, suffered a multi-primer detonation causing injury: “I had the same thing happen a few years ago now with the same Hornady hand primer with 50-75 [Federal 215M primers] in the tray. Made a bit of a mess of both my hands, blew primers and tray all around my large workshop. Scared the [heck] out of my employee who was near me at the time. Some stitches, bandages and it was all good, [but with] some wicked scars… I think a primer had turned side-on when being put into Bertram .408 CT brass which had nice tight pockets and required more force than usual. I use RCBS [priming tools] now with a flat bar that slides across to prevent sympathetic detonations. I hadn’t heard of it before, but found out it wasn’t that uncommon after it happened.”
Forum member Nodak7mm has discovered an ideal way to store your rifle cleaning rods in your garage or loading room. Using inexpensive Berkley Horizontal Fishing Rod Racks, Nodak7mm has secured a half-dozen Dewey rods on the back of a door. You could also mount the racks along a wall or on the side of a storage cabinet. This installation takes up minimal space and the Berkley Racks cost $16.99 at Amazon (select “6 Rod Rack”). There is also a similar Mezoom 6-Rod Rack Pair for just $9.99 at Walmart. If you prefer wood, Amazon also sells a pine 6-rod wall rack for $29.99.
Nodak7mm explains: “I was moving some fishing poles around and ended up with an extra pair of Fishing Rod wall racks. I said to myself, ‘I bet this would hold my Dewey cleaning rods’. I mounted the pair on the inside of a closet door in my man cave and put my cleaning rods in it. It works like a charm and is far cheaper than a specially-made rack that only lets the rods hang. One can even slam the door with the rods mounted and they stay put. This rod rack set… is made by a nationally recognized name and does a great job of holding the cleaning rods securely and safely.” These are inexpensive and are easy to mount to a door or wood cabinet.
Stow Your Cleaning Rods on Your Gun Safe
Another option is to make a rod set with a magnetic backing strip. This can be affixed to the sides of your gun safe or steel storage cabinet. Here is a home-made, magnet-affixed cleaning rod holder made by Forum Member “BobM”. This smart installation works great. CLICK HERE for more information.
Are you looking to get started in tactical/practical competitions? Or perhaps you already have have some PRS/NRL experience but want to upgrade your equipment and enhance your match results. Here are eight videos that can help you improve your game. These videos feature top PRS/NRL competitors and knowledgeable manufacturers’ representatives. You’ll find other related videos on the Long Range Precision Shooters YouTube channel.
How Accurate Are the Top PRS Shooters?
In this video, MDT put three top centerfire PRS shooters to the test, running them through some of the most difficult stages. The goal? To showcase the level of accuracy and precision these top shooters can achieve. From shooting off barricades to hitting targets from rooftops and rocks, these shooters demonstrate why they are considered among the best in the world. Top-tier modern PRS/NRL rifles when shot prone from a bipod at 100 yards can do 1/3-MOA or better for three shots.
Building a Custom PRS/NRL Rig
Action, trigger, barrel, chassis, rails, and optics — this video from Burris covers all the key components of the modern PRS/NRL rifle. This video discusses the pros/cons of various configurations and the explains what to look for in a PRS/NRL riflescope.
PRS Tactical Division Explained
In this video MDT Shooter Matt Stiner explains the basics of competition in the PRS Tactical division. The video covers rifle, cartridge choice, optics, and key accessories. He also explains how to set up your PRS Tactical rig for best results. In addition Matt talks about bullet and brass options.
Shooting a PRS Match for the First Time
Here’s an amusing video from the land Down-Under — Australia. The video covers a club PRS match, showing various shooting positions. Around the world, the PRS discipline is growing rapidly, particularly with younger marksmen under 35. The matches are fun and fast-paced and the sport is much more dynamic and physically challenging than benchrest or F-Class competition.
Building Your Rig — Gear and Cartridge Selection for PRS/NRL
Part of a Firearms Depot PRS mini-series, this video covers gear and cartridge. Host Adam delves into the core elements that craft a winning setup. The video covers factors to consider when choosing a cartridge. The video also discusses chassis and barrel selection. Along with the gear talk, the video covers factors to consider when selecting a smith to help with chambering and rifle building.
Road to the PRS
This video from Kestrel offers good advice on getting started in PRS/NRL shooting. Experts demonstrate multiple shooting positions and offer advice on shooting from barricades. Topics covered include rate of fire, scope use, and equipment selection.
Savage 110 Elite Precision — Good Production Class Choice
This Alabama Arsenal video shows the Savage 110 Elite Precision on PRS Match stages using bags, tripods, and bipods, firing from stone barriers, field frames, and wood platform supports. If you are in the market for a PRS rifle, this video, which now has 355,000 views, is well worth watching. It covers specific features including trigger, chassis, magazines, and Atlas attachment. NOTE: The price limit for Production Class has risen significantly over the years, with a current MSRP max of $3000 for the rifle and $2500 for the optic.
PRS on a Budget — Converting a Basic Rifle for PRS Use
Top of the line rifles for competition are exceedingly expensive, but there is another option if you have a rifle in the safe that doesn’t get much use. Top F-Class shooter and wind coach Keith Glasscock notes: “I converted my .223 Remington varmint rifle into a Tactical class/PRS training rifle to save costs on ammunition and barrels so I can get better, faster.” Keith shows a very logical way to get started in the PRS/NRL game.
Some folks say you haven’t really mastered marksmanship unless you can hit a target when standing tall ‘on your own hind legs’. Of all the shooting positions, standing can be the most challenging because you have no horizontally-solid resting point for your forward arm/elbow. Here 10-time National High Power Champion Carl Bernosky explains how to make the standing shot.
Carl Bernosky is one of the greatest marksmen in history. A multi-time National High Power Champion, Carl has won ten (10) National High Power Championships in his storied shooting career, most recently in 2012. In this article, Carl provides step-by-step strategies to help High Power shooters improve their standing scores. When Carl talks about standing techniques, shooters should listen. Among his peers, Carl is regard as one of the very best standing shooters in the history of High Power shooting. Carl rarely puts pen to paper, but he was kind enough to share his techniques with AccurateShooter.com’s readers.
If you are position shooter, or aspire to be one some day, read this article word for word, and then read it again. We guarantee you’ll learn some techniques (and strategies) that can improve your shooting and boost your scores. This stuff is gold folks, read and learn…
How to Shoot Standing by Carl Bernosky
Shooting consistently good standing stages is a matter of getting rounds down range, with thoughtfully-executed goals. But first, your hold will determine the success you will have.
1. Your hold has to be 10 Ring to shoot 10s. This means that there should be a reasonable amount of time (enough to get a shot off) that your sights are within your best hold. No attention should be paid to the sights when they are not in the middle — that’s wasted energy. My best hold is within 5 seconds after I first look though my sights. I’m ready to shoot the shot at that time. If the gun doesn’t stop, I don’t shoot. I start over.
2. The shot has to be executed with the gun sitting still within your hold. If the gun is moving, it’s most likely moving out, and you’ve missed the best part of your hold.
3. Recognizing that the gun is sitting still and within your hold will initiate you firing the shot. Lots of dry fire or live fire training will help you acquire awareness of the gun sitting still. It’s not subconscious to me, but it’s close.
4. Don’t disturb the gun when you shoot the shot. That being said, I don’t believe in using ball or dummy rounds with the object of being surprised when the shot goes off. I consciously shoot every shot. Sometimes there is a mistake and I over-hold. But the more I train the less of these I get. If I get a dud round my gun will dip.* I don’t believe you can learn to ignore recoil. You must be consistent in your reaction to it.
5. Know your hold and shoot within it. The best part of my hold is about 4 inches. When I get things rolling, I recognize a still gun within my hold and execute the shot. I train to do this every shot. Close 10s are acceptable. Mid-ring 10s are not. If my hold was 8 inches I would train the same way. Shoot the shot when it is still within the hold, and accept the occasional 9. But don’t accept the shots out of the hold.
6. Practice makes perfect. The number of rounds you put down range matter. I shudder to think the amount of rounds I’ve fired standing in my life, and it still takes a month of shooting standing before Perry to be in my comfort zone. That month before Perry I shoot about 2000 rounds standing, 22 shots at a time. It peaks me at just about the right time.
This summarizes what I believe it takes to shoot good standing stages. I hope it provides some insight, understanding, and a roadmap to your own success shooting standing.
* This is very noticeable to me when shooting pistol. I can shoot bullet holes at 25 yards, but if I’ve miscounted the rounds I’ve fired out of my magazine, my pistol will dip noticeably. So do the pistols of the best pistol shooters I’ve watched and shot with. One might call this a “jerk”, I call it “controlled aggressive execution”, executed consistently.
For today’s Sunday GunDay story we offer a short history of the legendary .50 BMG cartridge, tips on loading, and some fun photos from FCSA matches in the Western USA.
Alliant’s Powder for 50-Caliber Applications
Report by Forum Member about Primer Flash-Over Incident
Forum member Nodak7mm has discovered an ideal way to store your rifle cleaning rods in your garage or loading room. Using inexpensive 
How to Shoot Standing
5. Know your hold and shoot within it. The best part of my hold is about 4 inches. When I get things rolling, I recognize a still gun within my hold and execute the shot. I train to do this every shot. Close 10s are acceptable. Mid-ring 10s are not. If my hold was 8 inches I would train the same way. Shoot the shot when it is still within the hold, and accept the occasional 9. But don’t accept the shots out of the hold.
