Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









June 3rd, 2009

Leica Introduces New ER Riflescopes

Leica is famous for its rangefinders, spotting scopes, and binoculars (and of course cameras). Now Leica is moving into the riflescope market. Leica has announced two new “ER” scopes for hunters. Initially, Leica will offer 2.5-10×42 and the 3.5-14×42 models. Both have 30mm maintubes, quarter-MOA clicks, and AquaDura lens coatings. Notably, both scopes have a long (10 cm/3.9″) eye relief. This extended eye relief allows the scopes to be mounted well forward so a shooter need not worry about recoil, even when shooting large magnum calibers.

Leica ER rifle scopes

SWFA has followed the development of the new Leica ER scopes. SWFA believes the Leica ERs will be some of the finest hunting scopes on the market, good enough to rival the Swarovski Z6, and Zeiss Victory series. Leica will offer five reticles, shown below. In addition, you can order the ER scopes with a neutral fast reticle adjustment (ASV), that adjusts the the impact point to different distances. Leica plans to start shipping its new ER scopes in October 2009. SWFA is listing the 2.5-10×42 at $1899.00 and the 3.5-14×42 at $1999.00, but those prices are subject to change.

Leica ER rifle scopes

Permalink New Product, Optics 1 Comment »
June 2nd, 2009

New Website for Match Cartridge Snap Caps

A couple months back, we announced that Eric Kennard had started producing snap caps for match cartridges such as the 6mmBR and 6XC. They say that necessity is the mother of invention, and that was true here. Eric started making snap caps because nobody produced such a product for the match chamberings that he shoots. Eric’s match-cartridge snap caps have been so popular that he has expanded his product line to include 12 different cartridges. Plus Eric has recently launched a new website, HarbourArms.com, that features a handy shopping-cart system, so you can easily order all the snap caps you need.

Harbour Arms Snap Caps

12 Cartridge Types Now Offered
Harbour Arms Precision Snap Caps are available in .223 Rem, 6mmBR, 6BRX, 6mm Dasher, 6XC, 6-6.5 x 47 Lapua, 6.5 x 47 Lapua, 6.5 x 284, .260 Remington, .308 Win, .300 Win Mag, and .338 Lapua Magnum. Each set of two snap caps is precision-crafted from aluminum and costs $12.95 for two snap caps.

Cartridges Offered:

.223 Rem

6mmBR

6BRX

6mm Dasher

6XC

6-6.5 x 47 Lapua

6.5 x 47 Lapua

6.5 x 284

.260 Remington

.308 Win

.300 Win Mag

.338 Lapua Mag

Harbour Arms Snap Caps

Who needs a Snap Cap? Anyone who dry fires. It has been said that dry-firing is the best form of practice. Dry-firing allows one to check for proper natural point of aim, position, and trigger control. Many of the custom rifle actions use two piece, thin, or titanium firing pins. These pins are susceptible to fracture or breaking when dry-fired too much. Shotgunners using custom trap or skeet guns would never dry-fire their expensive arms without a Snap Cap to protect their firing pins. Nothing is worse than your firing pin breaking during a match!

Permalink News 4 Comments »
June 2nd, 2009

Follow Shooting Sports Summit with Streaming Webcasts.

The National Shooting Sports Foundation’s 2009 Shooting Sports Summit is under way in Weston, Florida. Over the next two days, more than 150 leaders from the firearms industry, wildlife conservation groups, and shooting sports organizations are joining members of TaskForce 20/20 to devise strategies to increase participation in hunting and the shooting sports by 20 percent over the next five years. Several key segments of the summit are broadcast live via webcast (click links below).

LIVE Summit Webcasts |Webcast Schedule for Shooting Sports Summit

Steve Sanetti, NSSF

The keynote speech is being delivered by Clyde Fessler, former vice president of business development for Harley Davidson who is credited with spearheading the re-branding of that company and broadening H-D’s appeal to younger generations. That success story should resonate with this audience who will be considering ways to attract more youth to participate in hunting and target shooting.

Following the Fessler speech, the summit kicks off with its first presentation — Youth Programs — one of five areas that attendees will focus on during the two days here. Three areas — Youth Programs, Recruitment and Retention/Reactivation–will be considered today, with two more — Access/Opportunity and Coordinating Efforts — tomorrow. Each area has a strategic initiative and three to four “questions” that will be discussed in roundtable meetings. Each roundtable will generate suggested action plans that all attendees will have a chance to vote for through an electronic poll.

Photo copyright NSSF, all rights reserved, used with permission.

Permalink News Post comment »
June 1st, 2009

New 6BR: Love at First Group

Many Forum members are putting together their first custom or semi-custom precision rifle this season. These folks often ask us, “What kind of accuracy can I expect from my first 6mmBR?” Of course there are no guarantees, but a 6BR with a good custom barrel, good chambering job, and a nice bag-riding stock should be able to shoot well under half-MOA (1/2″ at 100 yards), maybe even approach quarter-MOA. Forum member Eric (aka Exercion) provided this interesting report on his new 6BR:

Love at First Group by Eric
Well, I took my new stick to the range for the first time today. It features a Savage single shot target action in RBLP configuration, 28″ Broughton 5C barrel, Sharp Shooter Supply Dogtracker stock with adjustable buttplate, and Nightforce scope.

Now, I have never owned a 6mmBR before, but from reading here and seeing them in action I decided to build one. Its main purpose in life is mid-range F-Class shooting, mainly at 600 yards, and if the winds are favorable, at 1,000. (I already have a 6.5 for “normal” conditions.) I am most grateful for all the info here, and especially the load data. I picked Reloder 15 under the 107gr SMKs for my first loads, starting at 29.0 grains, and proceeding in half grain increments to 30.0 grains. Jumped the bullets 0.015″. Ran the Lapua brass through the neck-sizer bushing die, and was concerned at the force needed to pull the expander button through the virgin brass necks but figured this was a once per case deal to round them out for initial loading. When I measured the runout on the loaded rounds, I was appalled as they had more wobble than anything I personally loaded before, but I kept reminding myself that this was the fireform/chronograph/scope and gun trial stage.

Three Shots in 0.335″ Edge to Edge
So off to the range this morning. No wind here at the house, so life was good … until I got to the range and the wind started to blow. So I set up everything, leveled the gun in the bags, leveled the scope to the gun, made sure the bore was in the center of the chronograph and bore-sighted. First couple of rounds were off to the right, so I moved the scope over 5 MOA and fired another shot, hit paper with it, so I shot 2 more and stopped because I couldn’t tell what was happening. A walk down to the hundred yard berm revealed a nice hole that measures 0.335″ at its absolute widest edge to edge! That’s the smallest 3-shot group I’ve ever fired with anything. I am so in love!

Savage 6BR

SDs Improve with Heavier Charge and Run-out Disappears
I kept going ’til I worked my way through my first 100 rounds.Given the conditions, I was more interested in the chrony numbers than group, (though 20-shot strings yielded nice quarter-sized holes) and found that as my charges got heavier the SD was coming down (the 30 grain load gave me an SD of 9). I can’t wait to see what will happen with some load tinkering, as well as bullet trials (have Bergers, Hornady A-Maxs, and Lapua Scenars waiting for the next trip). Also, as I had hoped, fire-forming “cured” the run-out problem. I ran the fired but un-sized cases over my concentricity tool and saw less than 0.001 runout on the necks now.

Permalink - Articles, Reloading 1 Comment »
June 1st, 2009

Expander Mandrels — Not Just for Neck-Turning

Lapua brass is so good that you’ll be tempted to just load and shoot, if you have a “no-turn” chamber. However, some minimal case prep will ensure more uniform neck tension. This will produce better accuracy, more consistent bullet seating, and lower Extreme Spread and Standard Deviation (ES/SD). Lapua brass, particularly 6BR, 6.5×47, .243 Win and .308 Win comes from the factory with tighter-than-optimal necks. Before you seat bullets, at a minimum, you should inside chamfer the case mouths, after running an expander mandrel down the necks.

The expander mandrels from both Sinclair and K&M will leave the necks with enough neck tension (more than .001″) so you can then seat bullets without another operation. Put a bit of lube on the mandrel before running it down the necks — but remove any lube that gets inside the necks before seating bullets.

Sinclair Expander Tool Mandrel

Both Sinclair and K&M Tools make a die body specifically to hold expander mandrels. Sinclair’s Generation II Expander Die Body (item 05-3000, shown above) completely captures the mandrel within the die so the mandrel cannot pull out. An O-ring in the die cap allows the mandrel to float a bit and find its own center within the case neck. This $24.95 unit fits caliber-specific expander mandrels (item E-XX, $8.75) which measure approximately .001″ less than bullet diameter for each caliber. Once you run the Sinclair expander mandrel down the necks of Lapua brass, after you account for brass spring-back, you’ll have about .002″ neck tension. This will make the process of seating bullets go much more smoothly, and you will also iron out any dents in the case mouths. Once the case mouths are all expanded, and uniformly round, then do your inside neck chamfering/deburring. The same expander mandrels can be used to “neck-up” smaller diameter brass, or prepare brass for neck-turning.

Forum member Mike Crawford adds: “These expanders can also reduce runout from offset seating. Prior to bullet seating, expand the sized necks to force thickness variance outward. With the Sinclair system, the necks will springback fine, and will not be pulled out of center. This leaves plenty of tension, and bullets seated more centered. I do this, even with turned necks, to get improved seating.”

Mandrels vs. Expander Balls on Decapping Rods
If you haven’t acquired an appropriate expander mandrel for your brass, but you DO have a full-length sizing die with an expander ball, this will also function to “iron out” the necks and reduce tension. However, using a die with an expander ball will work the necks more — since you first size them down, then the ball expands them up again. Typically (but not always), run-out is worse when using an expander ball vs. an expander mandrel.

Permalink Reloading 1 Comment »
May 31st, 2009

South Africa Hosts World Benchrest Championship June 22-29

World benchrest championshipThe 2009 World Benchrest Championship (WBC-10) will be held at the Krokodilspruit Range in Pretoria, South Africa June 22-29, 2009. WBC-10 includes matches at 100m, 200m, and 300m. Complete information on the upcoming event are available at the WBC10 website, wbc10.co.za. A handy FAQ Page provides answers to questions about accommodation, transport, and South African firearms laws. CLICK HERE for WBC10 Event Schedule.

Listed below are the names of the team members who will represent the United States at the 2009 World Benchrest Championship (WBC-10) in South Africa this June:

Team 1 – Ed Adams, Wayne Campbell, Gene Bukys, Tony Boyer
Team 2 – Larry Costa, Mike Ratigan, Bill Summers, Joe Krupa
Team 3 – Chris Harris, Don Nielson, Cecil Peterson, Tim Oltersdorf
First Alternate: Gary Sinclair
Honorary Team Captain: Walt Berger

World benchrest championship

Krokodilspruit is a modern multi-purpose shooting range situated approximately 23 kilometers north of Pretoria and is the home range of the Gauteng Benchrest Shooting Association. June is the first month of winter in South Africa, but this area has little rainfall in winter.

World benchrest championship

Something New for 300 Meter Stage?
Most American short-range Benchrest matches are shot at 100 and 200 yards only. WBC-10 includes a 300m match on Saturday, June 27th. As South Africa is known for strong and challenging winds, it will be interesting to see if some competitors try heavier, higher-BC bullets at 300m rather than the typical 60-70gr flatbase 6mm bullets used at 100 and 200.

Permalink Competition, News 1 Comment »
May 31st, 2009

22-Caliber Moly 75gr A-Maxes on Sale

Hornady’s 75gr A-Max BTHP bullet is among the more popular bullets used by service rifle shooters. The plastic-tipped projectile also works well in 22-250s and 22 BRs with 1:8.5″ (or faster) barrels. The 75gr A-Max boasts an excellent 0.435 BC, which is higher than the claimed BCs for both the Sierra 77gr MatchKing (0.372 @ 3000+ fps) and the Sierra 80gr MatchKing (.420 @ 2200+ fps).

75 grain .22 caliber Hornady A-Max

High-BC 22 Cal Moly A-Maxs for under $20/100
Because Service Rifle competitors must shoot long strings of fire without cleaning, many prefer to shoot moly-coated bullets. Varminters likewise appreciate the fact that coated bullets may extend cleaning intervals. PrecisionReloading.com currently has moly-coated 75gr A-Maxs on sale for just $19.65 per hundred. That’s a good deal for bullets that are more than capable of winning Service Rifle matches. Consider that Sierra 77gr MKs are selling elsewhere for $25-$28.00 per hundred. If you have a fast-twist .224 and you like Moly, you may want to snap up some A-Maxs at this discounted price.

Permalink Bullets, Brass, Ammo, Hot Deals Post comment »
May 30th, 2009

Field Test: Anschütz Model 64-R Biathlon

Anschutz 64R BiathlonWe’ve had an Anschütz model 64-R Biathlon to play with since the first of the year, thanks to Anschütz. This is a very impressive rifle. Accuracy has exceeded our expectations. Even with relatively inexpensive Wolf Match Extra and Eley Club Xtra, the gun has shot many 1/4″ groups at 50 yards from bipod. Our ace rimfire triggerman, Joe Friedrich, has shot some 50-yard groups with 4 out of 5 shots virtually through one hole, and the fifth maybe half a bullet width further out.

Originally, the gun came with a 2.2-lb (one kilo) two-stage trigger, suited for biathlon and silhouette. That trigger was nice, and certainly shootable, as we could get the second stage down to about 9 ounces. But Anschütz recently provided its 500 gram match trigger assembly, and that has made the gun even sweeter to shoot. The 500 gram trigger installed easily, and by adjusting two screws we got the total pull weight down to 1.13 pounds, with the second stage about 5 ounces. (Note: in the video, I said the trigger pull was about “one and a half pounds”; we later adjusted it down to 1.13 pounds, or 512 grams.)

Please enable Javascript and Flash to view this VideoPress video.

The cheekpiece adjusts for height and cant angle. Length of pull can be adjusted by means of plastic spacers. With the spacers provided by Anschütz, the LOP is about 13.3 inches. That’s still a bit short for this Editor, but the gun was still very comfortable to shoot in all positions: prone, sitting, and standing. The near-vertical grip is very comfortable in prone and, with the scope positioned well forward, you can easily get your head in the right position for scoped shooting. With its built-in accessory rail, and a $6.00 track adapter, a Harris bipod attaches easily, and you can move the bipod position fore and aft.

Anschutz 64R Biathlon

With its excellent ergonomics and stellar accuracy, we think the Anschütz 64R Biathlon is a superb choice for tactical rimfire matches. Plus, it’s dead-nuts reliable. By contrast, at the rimfire tactical matches we’ve covered, we’ve seen a variety of misfeeds and/or mag failures with other brands of rifles. With the Anschütz 64R, mag feeding and function has been flawless. We’ve shot over 700 rounds without a single problem.

Anschutz 64R Biathlon

Does the rifle have flaws? Yes, a few. First, as noted, the LOP is short for someone with long arms, even with 3 spacers installed. Second, the barreled action and bolt are prone to develop rust if you don’t keep them well-oiled. We wish Anschütz offered a more durable, corrosion-resistent finish so we didn’t have to baby the blueing after each shooting session. While the magazines fed flawlessly, the mag well is recessed and the mag release is small. This caused some fumbling when we tried to do “speed reloads.” That’s it — the complaint list is pretty small, and you could easily apply a baked-on resin finish if you wanted.

Anschutz 64R Biathlon

Subjectively, this gun is a hoot to shoot, and I can honestly say I’ve had more fun with this rifle than any other rimfire I’ve tested. No, it won’t rival a tuned ARA rimfire Benchrest rig, but it is still exceedingly accurate, and the gun is truly versatile. It’s ideal for tactical matches, club fun shoots, and if you lock the cheekpiece in place and use the 2.2-lb trigger, most clubs should let you use it for silhouette. The gun currently retails for about $1200.00 IF you can find one. Anschütz isn’t building many 64Rs these days, and only a handful made their way to the USA. Hopefully, our report will spur interest in the rifle and Anschütz will decide to ship more across the Atlantic.

Permalink News 6 Comments »
May 30th, 2009

"Negative Image" Targets for Better Long-Range Viewing

At long range, small bullet holes are much easier to see in the white than in the black. When you’re practicing at long range on high power targets, one way to enhance your ability to see your bullet holes is to print a “negative” version of the regulation bullseye target. Forum member Watercam has a new Pentax PF-80ED. With the Pentax he can see 6mm bullet holes in the white at 600 yards, but holes in the black are only visible out to 400 yards or so. Accordingly, Watercam uses a modified “reversed” black-to-white target for 600-yard practice. Watercam writes:

“I just received my Pentax PF-80ED-A angled spotting scope the other day and it is awesome. Great quality. I traded a straight Kowa 77mm fluorite for it through SWFA.com. Eye relief with the Pentax 10-60 power zoom is 18-22mm (much more than the Kowa zoom), so I can use glasses with no problem. The view through the Pentax is very sharp and contrasty with great color.

With my 6mm and limited mirage I’m seeing defined, 6mm holes in the white out to 600. In the black, I can see bullets holes at about 400 with my eyes. I am printing reverse-color targets for training without a pit partner at the 600-yard line.”

Pentax PF-80 ED scope

If you’re not concerned with official scoring rings, you can use an all-white target with a bright, fluorescent target dot in the middle. A 2″- or 3″-diameter stick-on target dot is highly visible at 600 yards. Birchwood Casey Target Spots® assortment #33928-TSA offers neon orange target dots in 1″, 2″, and 3″ diameters.

Permalink Optics 2 Comments »
May 29th, 2009

FREE NRA Memberships Still Available

NRA free membership offer

UPDATE: This was a Year 2009 Offer. The Offer is no longer available!

Every day many web users stumble upon our Daily Bulletin in search of information on the NRA’s free membership offer. We first announced that promotion back in March.

Here’s the deal — The NRA is still offering a one-year FREE membership, but the offer no longer includes a free subscription to the American Rifleman, American Hunter, or America’s First Freedom magazines.

Still, it’s a good deal. The regular price for a one-year NRA membership is $35.00. This is a special web-only offer, available for a limited time.

CLICK HERE for FREE NRA Membership Offer.

CLICK HERE for a full list of NRA membership benefits, including insurance.

What’s the catch? Well there’s really none for the first year. However, you will be billed if you choose to renew your membership. Also anyone signing up should know that you’ll receive a lot of mail solicitations from the NRA. For this special web offer, the NRA also requires your email address and phone number. Please note — to enjoy all the insurance protections of the NRA you’ll need to fill out an additional form once you receive your membership number.

Permalink News 6 Comments »