|
|
April 6th, 2009
Leupold has released a new ultra-compact laser rangefinder, the RX-1000. This thing is tiny — not much larger than a pack of cigarettes. The pocket-sized RX-1000 measures 3.8 inches long and weighs just 7.8 ounces. The “street price” for the basic RX-1000 unit is about $350.00 while the TBR® model with built-in ballistics compensation runs about $400.00 (OpticsPlanet.com prices). Both the RX-1000 and RX-1000 TBR units feature an aluminum frame, inside a weatherproof, matte-black, rubber-armored exterior. The RX-1000 TBR is also available in Mossy Oak® camouflage.
Beyond the reduction in size and weight, the notable feature of the RX-1000 is an improved optic with better light transmission. Leupold claims the RX-1000’s 80% light transmission is superior to most other rangefinders. In addition, the RX-1000 features a RED OLED read-out. In low light conditions, the OLED is definitely easier to view that conventional LCD displays.
Leupold claims the RX-1000 has a maximum effective range of 1,000 yards (914.4 meters) on reflective targets. Based on the performance of other Leupold rangefinders, we expect this claim is grossly optimistic and you shouldn’t count on reliable ranging much past 700 yards.
One feature we like about the new RX-1000 are the selectable reticles: a small “Plus Point” crosshair for ranging small targets, a larger outer crosshair, or a combination of the two. This is a feature we’d like to see added to premium rangefinders like the Swarovski laser guide. Choosing a tight reticle lets you aim the device more precisely, which reduces the chance of errant laser returns.
We think it’s wise to pay the money for the TBR model which automatically calculates the shot angle and provides the actual Ballistic Range rather than the straight-line distance to the target. This can be very helpful for hunters shooting at extreme up or down angles in mountainous country. To learn more about the RX-1000, check out Jeff Quinn’s Gunblast.com Review, visit www.leupold.com, or call 1-800-LEUPOLD.
April 5th, 2009
[This item last appeared a year ago in our Daily Bulletin, generating considerable interest among readers. By popular request, we’re reprinting this story, in case you missed it the first time around. — Editor]
Precision shooters favor premium brass from Lapua, Norma, or RWS. (Lake City also makes quality brass in military calibers.) Premium brass delivers better accuracy, more consistent velocities, and longer life. Shooters understand the importance of good brass, but many of us have no idea how cartridge cases are actually made. Here’s how it’s done.
The process starts with a brass disk stamped from strips of metal. Then, through a series of stages, the brass is extruded or drawn into a cylindrical shape. In the extrusion process the brass is squeezed through a die under tremendous pressure. This is repeated two or three times typically. In the more traditional “draw” process, the case is progressively stretched longer, in 3 to 5 stages, using a series of high-pressure rams forcing the brass into a form die. While extrusion may be more common today, RWS, which makes some of the most uniform brass in the world, still uses the draw process: “It starts with cup drawing after the bands have been punched out. RWS cases are drawn in three ‘stages’ and after each draw they are annealed, pickled, rinsed and subjected to further quality improvement measures. This achieves specific hardening of the brass cases and increases their resistance to extraordinary stresses.” FYI, Lapua also uses a traditional draw process to manufacture most of its cartridge brass (although Lapua employs some proprietary steps that are different from RWS’ methods).

After the cases are extruded or drawn to max length, the cases are trimmed and the neck/shoulder are formed. Then the extractor groove (on rimless cases) is formed or machined, and the primer pocket is created in the base. One way to form the primer pocket is to use a hardened steel plug called a “bunter”. In the photos below you see the stages for forming a 20mm cannon case (courtesy OldAmmo.com), along with bunters used for Lake City rifle brass. This illustrates the draw process (as opposed to extrusion). The process of draw-forming rifle brass is that same as for this 20mm shell, just on a smaller scale.


River Valley Ordnance explains: “When a case is being made, it is drawn to its final draw length, with the diameter being slightly smaller than needed. At this point in its life, the head of the draw is slightly rounded, and there are no provisions for a primer. So the final drawn cases are trimmed to length, then run into the head bunter. A punch, ground to the intended contours for the inside of the case, pushes the draw into a cylindrical die and holds it in place while another punch rams into the case from the other end, mashing the bottom flat. That secondary ram holds the headstamp bunter punch.

The headstamp bunter punch has a protrusion on the end to make the primer pocket, and has raised lettering around the face to form the headstamp writing. This is, of course, all a mirror image of the finished case head. Small cases, such as 5.56×45, can be headed with a single strike. Larger cases, like 7.62×51 and 50 BMG, need to be struck once to form a dent for the primer pocket, then a second strike to finish the pocket, flatten the head, and imprint the writing. This second strike works the brass to harden it so it will support the pressure of firing.”
Thanks to Guy Hildebrand, of the Cartridge Collectors’ Exchange, OldAmmo.com, for providing this 20mm Draw Set photo. Bunter photo from River Valley Ordnance, RVOW.com.
April 5th, 2009
Sinclair International recently launched its enhanced and upgraded website. The revamped site is faster to navigate, and you’ll find it much easier to find new products and bargain specials. Congrats to Bill Gravatt and the folks at Sinclair Int’l for a job well done.

One great feature newly integrated into Sinclair’s website is The Reloading Press, a regularly-updated Blog with product info and authoritative technical articles on reloading and precision shooting. Here are some of the valuable “how-to” articles you’ll find on Sinclair’s Blog:
Determining Bullet Seating Depth
Setting Up a Full-Length Sizing Die
Shooting Non-Benchrest Rifles from the Bench
Basics of Reloading for the AR15
Methods and Benefits of Sorting Cases by Weight

The Reloading Press is a valuable addition to the online resources available to precision shooters. We commend Sinclair for investing the time and effort to provide this material at no cost to Sinclair’s customers. Click one of the links above and check it out yourself.
April 4th, 2009
The recent multi-trillion-dollar orgy of federal spending has many economic experts worried about the “I word” — inflation. As the government borrows more and more money, these experts caution we can expect the dollar to fall and prices to rise. Are there “safe havens” in inflationary times? Real estate is depressed, the stock market has been devastated, and as for bonds… well if interest rates rise in the months ahead, you have to be very careful about buying low-return bonds right now.

We are NOT qualified to hand out investment advice, particularly in these troubled economic times when all the “conventional wisdom” has gone by the wayside. Nonetheless, it appears that demand for fine firearms remains high. In particular, “classic” high-grade revolvers have been appreciating even while stocks tumble and home values sink.

Colt Python — An Appreciating Asset
Among the most desirable of double-action revolvers is the Colt Python, preferrably with Colt’s famous high-polish Royal Blue finish. Pristine blued Pythons sold for $800.00-$900.00 just a few years ago. Now the same revolvers are fetching up to $1900.00 at auction. The mint-condition 1977 6″ Python shown below sold for $1850.00 just last week on Gunbroker.com, and there were 15 bidders! (See Completed Auction 125683644.)

Would a Python be a good short- or long-term investment? You have to decide that for yourself. But consider this: Colt stopped producing Pythons in 2005, so the supply is fixed. And the recent Pythons are not (yet) considered as desirable as Pythons made in the 60s, 70s, and 80s. So the price of the older Pythons keeps rising. Pythons were produced with 2.5″, 4″, 6″ and 8″ barrels. All lengths are popular, but the 6″ Python seems to be the most sought-after currently.

If you’ve ever carefully inspected a Royal Blue Python, and worked the action, you’ll understand why they are so popular. The liquid-like ultra-smooth blued finish is simply the best ever offered on an American handgun. Chuck Hawks writes: “Colt’s Royal Blue is the ultimate polished blue finish for steel guns. No other blued production revolver can compare to the beauty of Colt’s Royal Blue Python.” And the Python’s double-action trigger is considered by many to be the smoothest ever made. The triggers on S&W Performance center revolvers are very, very good, but the trigger in a 60s or 70s Python is better — right out of the box. Typically, Pythons are extremely accurate, shooting sub-inch at 25 yards. Ergonomically, Pythons are a pleasure to shoot because the bore axis is lower than on most other large-frame revolvers. Chuck Hawks agrees: “Subjectively, this finest of all DA revolvers is a soft shooter… most shooters feel that the Python kicks less than other DA magnum revolvers of comparable weight.”

April 4th, 2009

6mmBR, 220 Russian, .308 IN STOCK
MidwayUSA just received supplies of Lapua brass for the hard-to-find cartridges: 220 Russian, 6mmBR, .243, 6.5 Grendel, and .308. If you need Lapua brass in a hurry, you might want to jump on this, as Midway’s inventory will probably sell out quickly.
220 Russian, item 1270320316, $94.99 per 100-ct box
6mmBR, item 1270323515, $80.89 per 100-ct box
.243 Win, item 1270235456, $82.34 per 100-ct box
6.5 Gredel, item 1270213283, $104.99 per 100-ct box
.308 Win, item 1270187523, $70.99 per 100-ct box
Other Sources
Bruno Shooters Supply expects to have more Lapua brass within two weeks. Grafs.com expects another large shipment to arrive fairly soon as well.
April 3rd, 2009
Congress has just approved a new $3.6 TRILLION dollar budget for fiscal 2010. This will include $1.75 trillion in deficit spending according to independent analysts (though House Democrats assert the deficit will only be $1.2 trillion). The budget was approved on party lines. No Republicans voted for the budget. In the Senate, the budget was approved 55-43, while in the House of Representatives the vote was was 233-196, with 20 Democrats dissenting.
With the U.S. population estimated at 305,529,237 as of 1/1/2009, (U.S. Census Bureau data), President Obama’s $3.6 TRILLION budget represents a historically unprecedented level of spending (and borrowing) per capita. Check out them zeros: $3,600,000,000,000.00!
The 2010 Federal Budget works out to $11,783.00 for every man, woman, and child in the United States, and represents $30,635.00 per household. This figure ($30,635) is 61% of the median American household income.*
A Trillion Here, a Trillion There…
For many Americans, the scale of the numbers being tossed around by Washington politicos is hard to comprehend. To put things in perspective, PageTutor.com has created a handy visualization of what one trillion dollars would look like, in stacked $100.00 bills. Here, for starters, is a mere $100,000,000:

The image below shows one Trillion dollars ($1,000,000,000,000) in stacked $100.00 bills. (Pallets are double-tiered). To give you a sense of scale, the little red figure in the lower left corner is a human, the same guy in the picture above. Is your mind sufficiently boggled now?

How Much is a Trillion?
Here are some other interesting Trillion-dollar calculations, offered by Doug Furton, a physics Professor at Grand Valley State University:
• 1 trillion dollar bills stitched together end to end in a line would stretch about 94 million miles — a bit more than the distance from earth to the sun.
• 1 trillion dollar bills stitched together to form a quilt would cover an area about the size of the state of Connecticut.
• If we spent $1.00 every second, it would take 32,000 YEARS to spend 1 trillion dollars.
How about repaying the $1.75 trillion dollars Congress intends to borrow in fiscal 2010? Think that will be easy? Think again. Prof. Furton explains: “If we borrowed 1 trillion dollars at 6% APR with terms similar to a conventional home loan the debt would accumulate interest at a rate of $1929 per second. If we paid the debt off at the rate of $2000 per second we could discharge it in about 56 years — a working lifetime. By the end of this massive loan we would have paid a total of nearly 3.5 trillion dollars, putting a tidy 2.5 trillion dollars in the coffers of whoever made us the loan”.
*According to the Census Bureau, the average American Household size is 2.6 persons. U.S. Median Household Income is $50,233.00, last officially calculated in 2007.
April 3rd, 2009
There is a fascinating article in Investors.com about Arthur W. Savage, founder of Savage Arms Company. A brilliant inventor, Arthur Savage had a remarkable personal history, full of adventure. (Did you know that, in addition to being a great gun designer, Savage invented a torpedo, built race cars, and is credited as being the inventor of radial tires?)
Born in Kingston, Jamaica, Arthur Savage was educated in Britain and the United States. In his 30s he explored the Australian outback with his wife and eight children, eventually coming to own the then-largest cattle ranch in Australia. But he soon sold the ranch and bought a coffee plantation in Jamaica. In 1892, still in his 30s, Savage moved to Utica, New York, hiring on with a Railroad and part-time with a gun parts maker. Savage turned his attention to gun design with the goal of producing a lever-action rifle that could shoot the sharp-nosed .303-caliber spitzer rounds favored by the military. To overcome the problem of pointed bullet tips detonating primers in a tubular magazine, Savage invented a new rotary magazine. Arthur’s new rifle also featured a spring-activated firing pin rather than a hammer. The design, perfected in 1893, became the classic Savage Model 99, credited as the first mass-produced hammerless rifle. In 1894 Arthur Savage founded Savage Arms Co. in Utica in 1894 to produce his new rifle. Savage’s Model 99 rifle stayed in production for 105 years, being produced with relatively minor changes through 1999.


Photos courtesy Hallowell & Co., Livingston, MT, purveyor of fine sporting arms.
Origin of Savage’s Indian Head Logo
You may wonder about the Indian head logo Savage arms still uses as its trademark. Here’s how it came into use. In 1919, Chief Lame Bear (illustration below) approached Arthur to purchase lever-action rifles for the Indian reservation and the two men struck a deal. The tribe would get discounted rifles and Savage would get their support and endorsement. It was at this time in the company’s history, that Arthur Savage added the Indian head logo–a direct gift from the Chief–to the company name.

April 3rd, 2009
Every month ShootingUSA offers a handsome new firearm in a drawing. This month the prize is a S&W 1911 with Crimson Trace Laser-Grips, MSRP $1,493.00. Sweet Pistol. To enter the contest, you need to provide personal info and the name of an FFL-holder to whom the gun can be shipped. In addition, you need to answer a question. We thought all our readers should know the answer to the current question: “You shoot a One MOA group at 1,000 yards — How wide is the spread of the group?” The suggested answers range from 5 inches to 12 inches. HINT: 1 MOA is 1.047″ at 100 yards.

About the Contest Gun
The S&W 1911 PD is a Commander-size model with 4 1/4″ barrel, carbon steel slide, and Scandium frame. With an 8+1 round capacity, it weighs 28 ounces empty. This model features a Novak rear sight, external extractor (for reliability), and wrap-around Desert Tan Crimson Trace Laser grips. This Editor owns a full-size, all-stainless S&W 1911. My gun has proven exceptionally accurate and has excellent fit and finish. With handloads my gun will shoot as accurately as some Baer and Wilson customs I’ve tried. Below is 5-round group I shot offhand at 10 yards with my 5″ S&W 1911. The bullet hole edges are sharp because I was using semi-wad-cutters. I used Vihtavuori N320 (my favorite powder for 45acp) and 200-grain SWCs from Precision Bullets in Texas. The only thing I would change on my S&W 1911 is the trigger shoe. I prefer the old-fashioned short trigger in 1911s (but that’s a matter of personal preference).
Target from Editor’s 5″ S&W 1911 (not contest pistol).

April 2nd, 2009
Lead by top UK shooter Vince Bottomley, a team of UK gun experts has launched Target Shooter, a new online “e-zine” dedicated to precision shooting. This is a great new offering — you should log on to TargetShooter.co.uk right now to check it out. Vince explains: “Our online magazine will cover target shooting in all its forms, including rimfire and centerfire benchrest, F-Class, classic military rifle, and tactical. We’ll deliver feature articles plus match reports and gear reviews.”
Target Shooter employs a publishing format called “Scribd” that delivers a print-magazine style format over the web. This is actually kind of cool, as you can zoom pages smaller and larger and download the entire “magazine” for off-line reading. A new edition of Target Shooter will be released every month.
Target Shooter Offers Great Content
The debut April 2009 edition, 109 pages long, is truly impressive. It contains many interesting articles including a 2009 IWA (Euro Shotshow) report from Vince Bottomley, a comparison test of budget scopes by Carl Boswell, a detailed F-TR Tubegun review by Laurie Holland and Vince B., and a fascinating discussion of Field-Target shooting by Tim Finley (covering all positions). And that’s not all — the magazine offers a two-month event calendar, plus match reports (check out Gwyn Roberts’ Gallery Shooting Tri-Nations tournament report).
Target Shooter also features many gear reviews and product evaluations. In the April edition, Carl Boswell provides a comprehensive review of the BullzeyePro optical boosters. If you are considering purchasing this product you should definitely read this review — it even includes through-the-lens photos, so you can see the magnification boost with your own eyes.
Overall, the new Target Shooter online magazine is a mighty impressive accomplishment. It is rich with content, the photography is excellent, and the level of technical expertise is high. We were very impressed by the diversity of disciplines covered — this magazine covers much more than conventional benchrest. Any gun enthusiast interested in precision shooting should log on to TargetShooter.co.uk. Not only is it one of the best sources of shooting information available, but it is currently 100% free. You can’t beat that.

April 1st, 2009
Air rifles and air pistols are not considered “firearms” under federal law. Therefore, in all 50 states, air rifles and air pistols can be purchased “over the counter”, without background checks. The lack of controls on pneumatic guns has long troubled many California lawmakers who have “taken aim” at the airgun industry with tough new legislation. This year, California extends its sweeping gun-control policies to air rifles and pistols under the terms of new legislation, AB 1984, recently codified into law. Under this bill, air rifle and pistol owners will be required to pay an “Air Excise Tax” on all canister refills and CO2 propellants. In addition, all refills must be done by state-licensed air refill centers operated by the California Air Resources Board (CARB). In order to qualify for refills (and purchase propellant cartridges), air rifle and pistol owners must first obtain a state-endorsed “Air User Certificate”, which will cost $95.00, renewable annually. These new regulations take effect June 1, 2009.

New Law Carries Stiff Penalties, Yet Fear of Air “Black Market” Persists
Recognizing that air is an abundant and otherwise free resource, the new law contains tough provisions to prevent air rifle and pistol owners from filling their air canisters from non-approved sources. Any air rifle/pistol owner caught refilling canisters from a private pump or compressor will be subject to a $10,000 fine for the first offense, with criminal penalties (up to 5 years in prison) for repeat offenders. This may, initially, cause some practical problems. Currently, CARB has no certified filling stations for airguns, and given California’s current budgetary crisis, it may be many months before the first filling stations come on-line. In the mean-time, using $8.3 million in Federal Stimulus funding, CARB will hire 65 “Air Security & Surveillance Officers” (ASSOs) to find scoff-laws who continue to fill their airguns with unregistered air. Some observers worry that one unfortunate side-effect of AB 1984 could be the creation of a criminalized “black market” for air in the Golden State.
Democratic legislators praised the new regulations. An official statement by the Assembly Democratic Caucus declared: “This is a great day for all Californians. Air rifles can be just as dangerous as powder-fired weapons. These air rifles are silent killers and even when used for target sports they can put your eye out.” California Governor Schwarzenegger did not issue a formal statement about the new Air Excise Tax. However an aide to the Governor, who declined to be named, remarked: “Look, this state is $40 billion in the red. Any new revenue source is welcome.” Off the record, he added: “We tax gasoline, we tax real estate, we tax health care, we tax income, we tax all the products you buy in stores, and we even tax you when you die. Why not tax air? It’s brilliant. Heck, if we could tax sunshine, we would”.
The California State Employees Union also expressed support for the new legislation, noting that it would create up to 200 new, permanent high-paying jobs. Sacramento has an abundance of workers skilled in the dispensing of hot air, so CARB believes it can quickly fill the new positions mandated by AB 1984. The California Legislative Analyst’s Office (CLAO), tasked with estimating the costs of new legislation, has predicted that Air Excise Tax revenues should “more than cover the hardware costs of air filling stations.” However, the CLAO cautioned that “attendant administrative and enforcement costs, including salaries, entitlements, and mandatory pensions, could run into the tens of millions of dollars annually.” Asked to comment on those projected costs, AB 1984’s author, Assemblywoman Juanita Wilson (D. Berkeley), observed: “Let’s worry about that later. This is about Hope and about Change…we’re doing this for the children. Plus California needs jobs, and my ground-breaking legislation will put hundreds of Californians back to work.”
|