|
|
August 29th, 2007
If you are looking for a great little rimfire, bolt-action squirrel gun for under $400.00, check out the Ruger 77 on sale at CDNN Investments for just $399.00 (Item RUG 07030). It is chambered in 17 Mach 2, a 1″ OAL round that pushes a 17gr plastic-tipped, jacketed bullet at about 2100 fps. The Ruger features a handy 10-round rotary mag, a 20″ heavy barrel, and a nice gray laminated stock. The rifle even comes with free 1″ rings that fit the top of the dovetailed receiver. As of 8/29/2007, CDNN had 38 of these 17m2s in stock.

Why the Mach 2 rather than a 17 HMR? First, the 17 Mach 2 has more than enough “punch” for small varmints (ground squirrels and crows) out to 130 yards or so. Second, 17 Mach 2 ammo is currently much cheaper than 17 HMR. While most 17 HMR ammo costs at least $8.50 per box (and sometimes much more), you can get 17 Mach 2 ammo from a variety of sources for as little as $3.79 per 50-round box.
We’ve done a lot of testing with the 17 Mach 2 in both factory and custom rifles. What we’ve seen is that factory rifles will often shoot 1/2 MOA or better at 50 yards and 1 to 1.5 inches at 100 yards–provided the ammo is good. Typically, however, you’ll get one “flyer” out of five, but that’s usually caused by variations in the ammo (excessive runout, or a bad crimp, or flawed bullet tip). Even in a fully-accurized, custom 17 Mach 2 rifle, a single round with .010″ runout can expand a 1/4 MOA group into 1 MOA. Still, for a carry-around varmint rifle that’s excellent accuracy. We wouldn’t hesitate to go on a “Squirrel Safari” with this little Ruger. The trajectory is much flatter than a 22LR, the ammo is relatively inexpensive now, and the accuracy is more than adequate for the task.

August 29th, 2007
The March Scope–it’s pricey, exclusive, and more than ever is found on top of winning Benchrest Rifles. Made by Koto in Japan, the 40X March has set new standards for clarity and resolution among benchrest scopes. By most reports, this $2100.00 scope with ED (low-dispersion) glass has the most reliable tracking and best resolution ever offered in a scope with magnification of greater than 30X. The March can resolve bullet holes at long distance well enough that some owners dispense with expensive spotting scopes altogether. In North America, March scopes are sold exclusively by Kelbly’s, (330) 683-4674. Currently, the warranty on the March 40X scope is five years and limited to the original purchaser only–something to consider given the hefty cost of the unit.
Forum member B. Harvey of Patriot Arms in Atlanta reports: “Today was my first chance to shoot (long-range) since getting the March and it performed perfectly. At each distance, 600, 800, 900 (not 1K though) we shot steel targets that are sitting on top of 55 gallon drums. Before the mirage got really bad, and when I say really bad, I mean you could barely see the steel targets, the March was able to resolve bullet holes in the drums at 900 yds. You could actually count the holes! The holes in the 800 and 600 drums were even easier to see. The contrast and clarity of this scope is outstanding and I am now trying to figure out how to get another one.”
Lynn Dragoman reports: “I got a chance to compare the March to the [Nightforce] 12-42X Benchrest model at the NBRSA 600-yard nationals. I shot next to Lou Murdica who had the March and who also shoots 100-200 benchrest. He could tell me where every hit landed on the paper. I looked through it and, sure enough, you could see 6mm holes at 600 yards. With the Nightforce you could only see holes in the white when conditions were perfect.”

Lou Murdica, who worked with Koto on developing the 40x fixed-power March scope, is now involved in preliminary design “brain-storming” for a zoom March. Right now all the critical specs (max magnification, parallax adjustment, weight and price) remain to be determined. And it’s not at all certain that a variable-power (zoom) March will ever make it into production. In the meantime, Schmidt & Bender plans a North American release of its new 12-50×56 PMII Zoom scope in early 2008. The S&B 12-50 will probably cost about $2700-$2800, given current exchange rates.
August 28th, 2007
Here’s a great do-it-yourself project for the winter. Texan Robert Lewis made himself a great portable reloading bench from plywood mounted to a Black & Decker Workmate. The bench, roughly 22″ x 19″ on top, folds up to fit easily in your car’s trunk or behind the seats in a pick-up truck cab. Four recessed bolts hold the wood top section to the collapsible B&D Workmate.The sides and back of the unit are attached to the base with small nails. There is a small shelf (also nailed in place) which can be used to clamp a powder measure or hold a scale. Shown in the photo is a Harrell’s Benchrest measure and Harrell’s single-stage “C” press.
Click for Larger Photo.
The whole unit can be built for about $65.00 with pine, or $80.00 with oak (as shown). Robert explained: “The Workmate was $40. If someone bought a 2’x4′ sheet of 3/4″ oak plywood, I think it is around $30. Using pine plywood would be about half that. Fasteners were $3. Spar Urethane would be $5.”
Robert told us: “I used a couple ideas I found on the web. The Larry Willis website gave me the idea to use the Black and Decker Workmate as a base. I found the Workmate on sale for $40 and the top is made from oak plywood I had in my shop. I sealed the wood with three coats of Spar Urethane. The whole thing folds into a nice package for transportation to and from the range.” Click Here to view a set of plans.

August 28th, 2007
The Tipton 14-piece Bore Brush set is now just $6.99 at MidwayUSA, marked down from $15.79. This kit, MidwayUSA item 761025, is great if you have a large selection of firearms with many different calibers. In our regular gear review section, we’ve recommended the MidwayUSA Multi-Caliber Jag Kit. It offers 12 different jags, and is very useful when you want to switch between a tight-fitting patch and a loose-fitting patch (use the .22 jag on a 6mm bore for a looser fit). The new Tipton Brush kit offers the same kind of utlility and convenience at a price that is hard to beat. At a gunstore you could easily spend $7.00 on just four or five brushes. At the sale price (good through 9/30/07), buy two Brush Kits — one for your loading room and one for your range kit.

The Kit includes brushes for 17, 22, 243, 25, 6.5mm, 270, 7mm, 30, 8mm, 338, 375, 416 and 45 calibers. Brushes are made from premium phosphor bronze for long life and cleaning power. All brushes have standard 8 x 32 male threads except the 17 caliber brush which has 5 x 40 male threads. The brush kit comes in a durable, hinged plastic box with marked slots.
August 27th, 2007
Larry Isenhour became the third man to go “sub-inch” at 600 yards in sanctioned competition, setting two new IBS Light Gun records in the process. Larry’s 0.943″ 50-3X group was an impressive accomplishment on the new, smaller target adopted this season. Fellow shooter Sam Hall reports: “Congratulations to Larry Isenhour. At Oak Ridge, TN this weekend (8/25/07), I got to witness Larry break the IBS 600-yard single target Light Gun group record with a 0.943″ inch group. All were in the 10 ring for a perfect 50 score — which will also be a new IBS 600-yard single target LG score record. That will be hard to beat! Conditions were not ‘perfect’ either. Switchy winds of 5-15 mph. There were several large groups shot over the day. It could not have happened to a more deserving fellow. Larry is a great guy and a great competitor.”
Here’s the target and the gun that shot it. Larry’s rifle (smithed by Mike Davis) features a Stolle Panda action, and 25.5″ Lilja 3-groove 8-twist barrel with 2500 rounds on it. The stock is a one-off custom built by Larry’s brother Robert. It’s walnut with a layer of Curly Maple in the middle. Note how the wood layers are stacked vertically rather than the more conventional horizontal lamination. The barrel is a bit on the short side because it started out as a .243 Ackley and then was re-chambered as a BRX (after 200 rounds), losing some length in the process. Larry believes that “You don’t need a super-long barrel. 25-26″ is plenty for the 600-yard game”. CLICK for LARGE PHOTO.


Larry was shooting a 6 BRX with 32.8gr of Varget powder, along with the Lot 559 Berger 105gr VLD bullets. NOTE: Lot 559 included the first 105s produced with Berger’s new die, and some shooters were concerned that the bullet diameters were smaller than previous 105s. Addressing those concerns, Berger polished the die, with the result that current 105 VLDs are very slightly larger in diameter than lot 559 bullets. Just shows you that maybe the new die VLDs were pretty good right from the start. Larry told us that “The lot 559 105s have shot like lasers through this barrel.”
Larry shoots a mild load, running about 2910 fps, with a .272″ no-turn neck. The record-setting brass was two and a half years old and had been reloaded 15-18 times without annealing. He neck-sizes first then resizes the whole body with a .308 die (this is longer than a 6BR body die so it sizes the longer BRX case from top to bottom). Larry’s shooting style is “modified free recoil”. He places his thumb behind the tang and one finger on the pistol grip very lightly, “just to index the trigger consistently”, according to Larry. He’ll let the stock touch his shoulder lightly. He shoots as fast as reasonably possible under the conditions. “Once I’ve got the gun indexed and the point of aim set right, I’ll touch her off–I don’t wait around”, Larry observed.
Editor’s Note: Larry is definitely a deserving record-holder. He truly is one of the “founding fathers” of this web site. Way back in May/June of 2004, before we even launched 6mmBR.com, Larry provided a ton of information that eventually went into our initial FAQ and competition pages. We want to thank Larry for all his assistance.
August 27th, 2007
On its website, the Great Britain Palma Team is offering daily updates from the World Long-Range Championships at the Connaught Ranges in Ottawa, Ontario, Canada. On the team’s Home Page, you’ll find a full score-sheet and day-by-day reports of conditions and match results. The team has also posted a nice gallery from Connaught. CLICK HERE to view the latest images from the event.
The World Championship kicked off immediately after the Canadian Championship wrapped up on the 25th. In Significant results from the Canadian Championship, Team Great Britain won the Canada Match with a record score of 1199.183, and also eged Team USA to win the Commonwealth Match by 4 points from the USA. Brit Toby Raincock (photo right) won the Grand Aggregate by 3 points. And American Thomas Whitaker (below) won the Governor’s Cup with a 297-31X.

Photos © Great Britain Palma Team, All Rights Reserved
August 26th, 2007
Though he is busy shooting with the U.S. Palma Team in Canada this week, recently crowned NRA Long-Range Champion John Whidden emailed us this exclusive commentary on his recent achievements. We asked John about the stresses and mental challenges involved in a big match such as the National LR Championship. We also requested details about the rifles John shot at Camp Perry. Read John’s comments below.

Winning Camp Perry and the Mental Game
Winning the National Championship is a long time goal realized. For me, being the National Champion was the single biggest shooting goal I had. I’m not sure exactly what will be my next shooting goal yet.
If I had to summarize the mental game at this level of competition in one word, I would probably choose the word “Confidence”. You have to have the highest level of confidence in your skills, your rifle, and your ammo. There can’t be even a shadow of a doubt that all of your equipment is the best there is. No detail can be left undone.
Confidence is a far reaching idea. It includes little things like making sure you have all of your equipment with you through the use of a checklist. Anything you can do to give yourself a higher level of confidence is worth doing.
Long-Range Hardware
In NRA Long Range, we shoot “Any Sight Rifles” and Palma rifles. The Palma rifles have to be .308s and they have to use Iron sights. The Any Rifles are used at different times with iron sights or scopes. They are also fairly unrestricted, as long as they are safe, .35 cal or under, and have no muzzle brake.
For the Any Rifle matches, I shot rifles chambered in .243 Win. My iron sight gun is a Winchester M70 action, Broughton 1-8 twist 5C barrel, Anschutz trigger, Robertson Original stock, and Warner rear sight. My scope gun is a Stolle Panda action with an Anschutz trigger, Broughton 1-8 twist 5C barrel, Roberston Composites Original stock, and a Nightforce 8-32x BR scope. All of my rifles are proud products of the Whidden Gunworks custom shop. I shoot the same load in each: Berger moly coated 105 grain VLDs, Vihtavuori N160, Lapua brass, and PMC (Russian) primers.
My Palma rifle is the same one I used to win the Palma Team Tryouts back in 2005 (Gun of the Week #59). It’s much like the aforementioned sight gun, except that the barrel is a Broughton 10-twist 5C. I shot the Berger 185 grain VLDs using Varget for powder, Lapua brass, and PMC (Russian) primers. The barrel is getting a little long in the tooth and I plan to replace it this winter.
The accuracy of these guns is simply amazing. The benchrest shooters pioneered this kind of technology, but their accuracy isn’t as far ahead of the rest of us as they think.
August 26th, 2007
If you’ve been looking for the specialized reloading tools from K&M, contact Precision Reloading, 1-800-223-0900, a catalog and online vendor located in Mitchell, South Dakota. Precision Reloading recently started stocking the excellent K&M Arbor Press, which can measure bullet seating pressure with an optional Force Gauge. K&M’s neck-turning tool (item KMMACN) is a favorite of serious reloaders, and the Primer Seating Tool with depth gauge (item KMPST975, below) is perhaps the most sophisticated device of its kind. This gives a positive read-out confirming that your primers are all seated to the same depth.

Bruno Shooters’ Supply also carries K&M products at very attractive prices. Shown below is the Neck-turning Tool with optional Pilot Jack, Carbide “doughnut-cutter” mandrel and indicator for neck-wall thickness.

August 25th, 2007

From August 26 through September 2, the Dominion of Canada Rifle Association (DCRA) will host the World Long-Range Championship at the Connaught Ranges near Ottawa, Ontario. This follows immediately after the 2007 Canadian Fullbore Rifle Championship which concludes August 25th.
World Long-Range Championship General Information
Long-Range Championship Event Schedule (.pdf file)
World Championship Daily Schedule (Course of Fire)
The World Long Range Championship is a quadrennial event. It commences on August 26th with The World Teams Championships for Veterans, Under 25 and Under 21 Int’l Teams. This is followed by the Individual Long Range Championship events (27th through 30th). The Team World Championship, also known as the Palma Trophy Match, runs from August 31st through September 2nd. Countries that have competed include the United States, Canada, Great Britain, Ireland, Scotland, France, Germany, Sweden, Norway, Argentina, Peru, Australia, New Zealand, South Africa, Kenya, Natal and Rhodesia.

In Team competition, the United States has won 13 of the 27 Palma competitions that have been conducted since the championship started in 1876. There are 17 firing members (16 plus one alternate) and five coaches (four plus one alternate) on the U.S. Palma Team (below). The selection process required each shooter to fire four 15-shot, 1,000-yard matches a day for four days.
The Palma Trophy Match is shot in three stages of slow fire in the prone position using an iron-sight .308-caliber rifle with a 155-grain bullet. Competitors aim for targets that have a 20-inch bull’s eye at 800, 900 and 1,000 yards away.
Connaught is located on the Ottawa River approximately 20 minutes west of Parliament Hill on the municipal boundary separating the cities of Nepean and Kanata. Connaught has been the site of military training and research for over 75 years. The DND property covers 2,600 acres (1,058 hectares) with a waterfront of approx five kilometres. It has been a crown game sanctuary since 1929.
August 25th, 2007
After some delays associated with licensing issues, Whidden Gunworks has resumed production of its bullet-pointing tool. Whidden’s Pointing Die System narrows the diameter of bullet meplats. This also makes the bullet tips more uniform by smoothing the ragged edges. The result is higher Ballistic Coefficient (BC), and, potentially, more consistent BC.
Our 1000-yard Editor, Jason Baney, has used the tool and he reports it performs as advertised. Jason noted a significant difference in 1000-yard vertical impact when he compared pointed and un-pointed 106gr and 105gr 6mm bullets. The bullets which were pointed-up with Whidden’s tool consistently hit higher on the target, indicating they flew with less drag to the target. Jason reports: “Shot round-robin, with my 6BR, 5-shot group centers were 18+ inches apart vertically. In other words, the pointed bullets flew 1.75 MOA flatter to 1025 yards. This number has been repeated in matches at Williamsport.”
John Whidden tells us: “Tests have shown pointed bullets to have a typical BC increase of about 35 to 40 points as compared to bullets right out of the box. At 1000 yards, we usually see them impact about 1-1.5 MOA higher.” The pointing die costs $250.00 plus $40 for each caliber-specific insert. For more info, call Whidden’s shop at (229) 686-1911 or visit WhiddenGunWorks.net.

|