|
|
September 2nd, 2007
In addition to the dozens of FREE downloadable targets you’ll find on this website’s TARGET PAGE, we’ve located some interesting fun targets from other sites. Click the links above each set of targets to download your favorites.
September 2nd, 2007
Do you suffer from “Camo Envy” when you see those slick, realistic camo finishes offered on factory Benellis and Brownings? Well, stock-maker Bell & Carlson (B&C) has a solution for you. B&C will apply a factory quality, thin-film camo-coat to your existing firearm.
Available options include Mossy Oak® Breakup®, Trebark® Superflauge®, Realtree Hardwoods®, and NaturalGear™. Cost is $185 for whole gun (not including scope/rings, bolt handle, floorplate or trigger guard), or $65 for stock alone. B&C can also do the rings and ring mounts for $15 each. Shown below are two NaturalGear™ patterns, both well-suited for a Western summer/fall varmint rifle.


September 1st, 2007
Is it time to develop a true one-design class for Benchrest competition? The idea would be to have a single, affordable design that could shoot a variety of matches in its own class. Rifle specs would be tightly controlled so that shooters would not have to constantly upgrade equipment, or purchase $2000 scopes to remain competitive. Chamber/barrel dimensions would be clearly defined so that any competent gunsmith could set up the rifle.
Imagine being able to shoot one rifle that would be class-competitive at all Benchrest distances: 100, 200, 300, 600, and 1000 yards. And you could shoot the same rifle in Club and Varmint matches at other distances such as 300m, 400 yards, 500 yards, 500m. If enough shooters got involved, economies of scale would drive down the cost of components (actions, stocks, triggers etc.). In Europe, for example, over 100,000 shooters shoot in target rifle matches with essentially identical, one-design equipment. Parts are very affordable.

Illustration only. One-Design Rifle would have different components.
We’ve discussed the concept of a one-design Benchrest Rifle, i.e. NASCAR for benchrest, in our Shooters’ Forum. READ this FORUM Thread. There are strong opinions on both sides of the issue. Many people see the potential and favor the idea because it would encourage new shooters and keep things affordable. With one gun certified for multiple distances, shooters could get more “bang for their buck.” Many readers from overseas liked the idea of a gun costing under $1500.00 complete (less scope), that would be universally approved for matches at any distance–yards or meters, 100-1000.
Other folks think “NASCAR for Benchrest” is a bad concept. They remark that we already have enough classes in the shooting sports, and that one-design shooting is already offered in Service Rifle and Garand Matches. Some readers feel that Americans are too enamored with customization–nobody wants a rifle that is exactly like the one on the next bench. Many active short-range BR shooters were concerned that adopting a new class would “pollute their matches” with unskilled shooters and lessen the glory associated with garnering Hall of Fame points.
CLICK GRAPHIC to view actual poll:

What are YOUR views on the subject?
You can let us know two ways.
First, go to the home page, and vote on our current Readers’ Poll. (Right now the voting is pretty even–58% support the one-design concept, while 42% are opposed.) Second, you can post a comment on the subject by clicking on “Comments”, right below this paragraph.
September 1st, 2007
If you are thinking about building a .338 Lapua Magnum ultra-long range rifle, consider this special opportunity. OK Weber has two (2), very special RPA Engineering Quadlock single-shot actions designed expressly for the .338 Lapua Magnum. As far as we know these are the only two such actions available in North America. The massive 10.5″-long, 4.5-pound actions are built of hardened chrome-moly, with a black matte finish. They feature a short-throw 4-lug bolt, integrated recoil lug, and Belleville washer stack (instead of coil spring) for super-short lock time. The actions are similar in appearance to the $2500 RPA 50 BMG action shown below, though smaller in scale.
Otto Weber has priced the 338 magnum Quadlocks at $1200.00 including RPA trigger, but NO trigger guard. You can either order an RPA guard or use after-market bottom metal. These super-stiff actions would be ideal starting point for a .338 Lapua Magnum custom project. There are only two left. Call Otto Weber right away at (541) 747-0458 to order.

August 31st, 2007
In cooperation with the U.S. Army Marksmanship Unit and MyOutdoorTV.com, the popular television show ShootingUSA is offering streaming video of USAMU “Top Guns” in action. The video of Steel Challenge Winner Max Michel in our 8/21 Bulletin was extremely popular. If you thought that was good, check out the clip of his USAMU teammate, PFC K.C. Eusebio. When young K.C. is on his game, he may be the fastest semi-auto handgun shooter in the world. An amazing prodigy, K.C. won the 2003 Steel Challenge at age 15! And K.C. holds many speed records. This editor has seen him shoot, and he performs the cleanest target transitions I’ve ever seen — no wasted motion whatsoever.
CLICK HERE to Load Video. (Fast Connection Required)

In the lead video, K.C. explains how to divide multiple targets into zones (like pie slices) to speed up transitions and lessen the chances of a miss. “Sectioning your targets” is a technique that will benefit action rifle shooters, and 3-Gun competitors as well. By grouping your targets in zones, keeping 2 or 3 targets in the same aiming field, you minimize body and head movement, allowing you to sight and fire more quickly.

Editor’s Note: As someone who has produced a few shooting videos, I can tell you that ShootingUSA’s video of K.C. is particularly well done from a technical standpoint. At least 8 different camera angles are used, including shooter’s POV taken from a head-mounted camera. Sound editing is dead on–you hear the hits as they happen. The video is enhanced by clear computerized graphics and K.C.’s helpful commentary. In addition to this video, there are five other USAMU streaming videos covering pistol, rifle, and shotgun techniques.

Screen Captures from ShootingUSA Videos © 2007 ShootingUSA, used by permission.
August 31st, 2007
The NRA has named John A. Nosler the winner of the inaugural NRA Golden Bullseye Pioneer Award. “Mr. Nosler was the unanimous choice of an eight-member selection committee, acting on behalf of NRA members nationwide”, said NRA Publications Executive Director Joe H. Graham. One of the world’s foremost innovators in ballistics and bullet design, Nosler invented the Partition and other custom bullets. He pioneered the premium bullet category that has been widely adopted by big-game hunters, and has influenced bullet manufacturers worldwide.
If you’ve wondered how the Nosler Partition came to be, “In the fall of 1946, a stubborn, mud-caked Canadian moose failed to go down, despite a well-placed shot from John Nosler’s 300 H&H. On the way home from that trip, John started thinking about a way to make a bullet that would perform well every time, no matter what the size of the game or the shot angle. Over the next year, he experimented with bullet design, finally settling on a unique, dual core bullet that was really the first Partition®. The following fall, John and his friend, Clarence Purdie, both killed moose with one shot using John’s new bullet. After a few years of production on lathes, John developed the impact extrusion method of manufacture [that] produced bullets with extremely concentric jackets[.]” (From Nosler.com.)
To learn more about John Nosler and his bullet designs, get your hands on Going Ballistic, a “Professional Memoir” told by John Nosler to outdoor writer Gary Lewis. With over 150 photos, and many fascinating accounts, this book is available from Sun Publishing for $24.95. CLICK HERE to read a short sample from Chapter 11, “Penetration and Expansion–The Need for a Better Bullet”.
The John A. Nosler Endowment of The NRA Foundation, funded by Nosler Inc., sponsors the NRA’s Basic Rifle Training Program.
August 31st, 2007

The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) has given notice that, effective 9/1/2007, all federal firearms licensees must use the revised Firearms Transaction Record Part I – Over-the-Counter (ATF Form 4473).
“In the immediate aftermath of the tragic events at Virginia Tech in April, many questions arose about whether the person responsible was prohibited under federal law from possessing a firearm and how the shooter passed the background check required before purchasing the two firearms used,” said ATF Acting Director Michael J. Sullivan. “ATF is clarifying this form in an effort to make it clear that any person who has been found by a court board or other lawful authority to be a danger to self or others is prohibited from purchasing a firearm or ammunition.”
The form clarifies the question regarding “mental defectives” and incorporates the definitions of this term set forth in the regulations, 27 CFR 478.11. The revision also incorporates certain provisions of the Violence Against Women and Department of Justice Reauthorization Act of 2005 (Public Law 109-162) by adding “tribal offense” and “Tribal Law” to the definition of Misdemeanor Crime of Domestic Violence.
August 30th, 2007
Bushmaster Firearms unveiled its impressive new website this week. The upgraded Bushmaster.com site now makes it easier to select guns and accessories for particular applications including competition, hunting/varminting, and self-defense. Bushmaster is clearly intent on becoming more than a “black rifle company”. A quick look at the website reveals that Bushmaster wants to promote the use of AR15-style rifles for hunting and target shooting. It speaks volumes that Bushmaster includes a picture of a female Service Rifle competitor on its new home page.

The upgraded site has many cool features, including an advanced, interactive Flash diagram that allows users to view all the internals of an AR15 as it cycles. You can choose from different views, including transparent and cutaway. Definitely check this out. Tip: To see all the internal workings, including shell loading/ejection, hammer function, and buffer operation, click “Zoom In” twice, center the lower receiver using your mouse, and select “Split” from the menu bar.

Bushmaster’s revamped website features a modern, secure e-commerce shopping cart system, with detailed specs and high-quality photos for all models including the new Real-Tree Camo Varminter (below).

The Bushmaster site is now structured to serve six “Communities”, each representing a particular sector of the shooting market: Hunting, Competition, Law Enforcement, Military, Recreation, and Home Defense.

Said Tom Tyler, Bushmaster Manager of Customer Service and Retail Sales “Besides information on the various rifle products Bushmaster offers, the new site provides an ‘e-shopping’ environment that has evolved from just parts, to one that now consists of accessories and associated items relating to the rifle market place to include; optics, cleaning kits, AR15 accessories, magazines etc.”
Bushmaster Firearms International, LLC (BFI) is the leading supplier of AR15-type rifles in the United States for Law Enforcement, Security applications, and consumer applications. Headquartered in Windham, Maine with manufacturing facilities in Windham and Lake Havasu, AZ, BFI supplies both Aluminum and Carbon Fiber-based AR15 type rifles and accessories to its US customer base, as well as LEO and Military customers worldwide. BFI, along with Remington Arms, is owned by Cerberus, a large holding company.
August 30th, 2007
Is an FFL required to ship a long gun out of state? Can you use the U.S. Mail to ship firearms? Can you ship guns directly to a manufacturer for repairs?
Answers to these and many other questions are provided in a convenient Firearms Shipping FAQ created by Gunbroker.com, the leading online firearms auction site. The article does a decent job summarizing applicable Federal law and includes handy links to the statutes themselves so you can read them word for word.

| 48″ MidwayUSA ‘Quick Ship’ Box, #897166, $15.99. A foam-lined double-cardboard box offers some protection for your firearm. But we recommend you put valuable pistols and long guns in a sturdy plastic or metal hard case, INSIDE a cardboard shipping container. Make sure the contents can’t move around inside the box. Always insure for full replacement value (including tax and transfer fees). Photograph the gun BEFORE it’s shipped so you can document its original condition should it arrived damaged. |
We find that folks are often confused between the rules for handguns and long guns. Handguns may NEVER be shipped through the U.S. Mails unless you are an FFL holder. By contrast, a “civilian” (i.e. non license-holder) CAN ship a rifle or shotgun via the U.S. Postal Service. In fact the USPS may be the most economical and reliable shipping choice for long guns these days.
Another common misconception is that you need the services of an FFL for outbound shipping of a firearm. While placing your outbound shipment in the hands of an FFL-holder can have some benefits, if the recipient is a valid Federal FFL, and you have received a copy of his license for verification, you CAN ship a long gun yourself to the address on the license. You can also ship a handgun directly to an FFL holder (or the manufacture for repair), but you must use a common carrier such as FEDEX or UPS. (Only a licensed manufacturer, dealer, or importer can legally ship a handgun via the US Post Office.)

August 30th, 2007
Keeping track of upcoming shooting events and summarizing them for our Bulletin, Monthly Blog, and searchable Event Calendar is keeping the webmaster away from critical tasks. We are looking for a calendar/event assistant who can locate and update event info and upload that to the web. No special computer skills are required, but the candidate should be a careful typist and know how to digitally crop and resize photos. We will compensate the assistant for his/her time based on the amount of work involved. This would be a nice “side-job” for a retired individual, student, or somebody working part-time. If you are interested, please contact mailbox@6mmBR.com or post a comment below.

|