Area 419 offers the impressive ZERO reloading press, a 9-station turret press with some very unique features. This press was designed to be the most precise turret ever created. As tested by Gavin Gear of UltimateReloader.com, the ZERO turret press delivered very impressive shoulder-bump consistency and ultra-low seated bullet run-out (about +/- 0.0005″). The numbers were as good as you can get from a quality single-stage press, so Area 419 did some impressive engineering. We would expect that, as this is an expensive product — MSRP is $1275.00. SEE FULL REVIEW on UltimateReloader.com.
The ZERO turret press lets you install up to nine (9) different reloading dies in the large top turret, which revolves around a central axis. But unlike most turret presses, the ZERO doesn’t have flex or wobble when you’re loading. This is because Area 419 includes a clever system for locking the turret in position after you’ve selected the die from your array. Area 419 also uses a unique system for securing shell-holders (see video at 12:00). This, likewise, adds to the precision of the press.
In the video above, you can see how the turret is secured with a “wedge clamp”. By loosening the wedge clamp you can index the press easily to any station. Then, when you have selected your die, you tighten the wedge clamp again. You can see this important procedure at 13:20 – 13:35 timemark in the video.
ZERO Turret Press Has Very Smooth Operation
Gavin observed that this ZERO turret is both smooth and very precise, thanks to smart engineering and the use of multiple bearings. Area 419 describes the design features:
— Turret (zero-slop) eliminates variability induced when removing and resetting dies
— The turret head holds nine 7/8×14-threaded dies (1-1/4 thread in future)
— Available ram-stroke here is 4.4″, allowing use of very tall cartridge types.
— Adjustable/interchangeable handle setup for maximizing leverage/feel based on operation
— Internally contained primer-catch system, slide-out drawer
Important Features of ZERO Turret Press
1. Press frame: 6061 Aluminum, clear anodized
2. Wedge clamp (locks turret into indexed position)
3. Turret (7075 aluminum and steel construction)
4. Adjustable handle with roller knob (set either left- or right-handed operation)
5. Bearings: Ball bearing plus roller thrust bearings for side plates
6. Ram riding in self-lubricated linear bearing
7. Spent primer catcher drawer
Milled from American billet aluminum and stainless steel, this press employs 14 bearings, including a self-lubricating linear sleeve bearing for the precision-ground 1.25″ ram. The linkage system also glides on bearings providing smooth operation with near-ZERO slop. The oversized ram features a 0.75″-diameter steel arm and ZERO-friction knob. The turret system is located with an oversized ball-detent system and secured using an over-sized, custom-made ZERO-point pull-stud. Locking the turret after indexing require only a half-turn of the supplied T-handle (see photo above). When indexing the turret, repeatability variance of the system should be less than .0005″.
The opening in the press will allow for sizing and seating of cases up to .338 Lapua Magnum, and will accept standard 7/8″ dies and standard shellholders. NOTE: Area 419 now offers a shellholder system with six precision headspace inserts that allow you to precisely tune shoulder bump when using the ZERO press: “With the new ZERO Modular Shellholder System you can set up your shellholder to your die and have more consistency, more repeatability, and less hassle.”
SUMMARY — Impressive Press Delivers Precise Results
Gavin Gear was very impressed with Area 419’s new Zero Press, which he said offers the precision of a quality single-stage with the versatility of a turret: “There will always be people that prefer a traditional single-stage. Where the ZERO will be compelling is to those who want the precision of a single-stage without the need to screw dies in and out. Leaving your dies set can have benefits for precision as well — everything comes back to the ‘same place’ when dies are indexed into position. Screwing dies in and out can impose variation, and variation is the enemy of the ‘white lab coat shooter’. I plan on testing the ZERO press with ultra-high-end dies, and custom dies that I ream to my own specifications. I’m thinking that will show the true potential of this press!”
Area 419 ZERO Press Video with Operation Instructions
2023 Petersen’s Hunting 50th Anniversary Issue
Outdoor Sportsman Group has released a special 50th Anniversary commemorative issue of Petersen’s HUNTING Magazine. Since 1971, Petersen’s HUNTING magazine has been a leading source of information and stories for hunters from around the world.
This special, 120-page commemorative issue is filled with history, from a remembrance of magazine pioneer, Robert E. “Pete” Petersen, to an in-depth look at the innovations that have shaped hunting for the last half-century. The issue also includes flashback feature stories from legendary writers as Jack O’Connor, Peter Hathaway Capstick, John Wooters and more.
“Petersen HUNTING’s continuing longevity and relevance in the shooting, hunting and outdoor industry is a testament to Mr. Petersen’s vision a half-century ago and the quality and content of the publication, which continues to resonate with our vast audience of readers… we thank them most sincerely for their decades-long support,” shared Kevin E. Steele, Publisher.
CLICK HERE for sample content from this commemorative issue of Petersen’s HUNTING. Current Petersen’s HUNTING subscribers will receive a copy of the special 50th Anniversary issue as part of their regular subscription. Newsstand price is $10.00.
Other Notable Publications from Outdoor Sportsman Group:
Forest of Windflags at World Benchrest Championships in France in 2011
There’s a simple, inexpensive “miracle device” that can cut your groups in half. If you’re not using this device, you’re giving away accuracy. The “miracle device” to which we refer is a simple wind indicator aka “windflag”. Using windflags may actually improve your accuracy on target much more than weighing charges to the kernel, or spending your life savings on the “latest and greatest” hardware.
Remarkably, many shooters who spend $3000.00 or more on a precision rifle never bother to set up windflags, or even simple wood stakes with some ribbon to show the wind. Whether you’re a competitive shooter, a varminter, or someone who just likes to punch small groups, you should always take a set of windflags (or some kind of wind indicators) when you head to the range or the prairie dog fields. And yes, if you pay attention to your windflags, you can easily cut your group sizes in half. Here’s proof…
Which Windflag to buy? For starters, MTM makes a simple, inexpensive flag sold on Amazon for $17.99. For more sophisticated flags CLICK HERE for Benchrest Central windflag vendors.
Miss a 5 mph Shift and You Could DOUBLE Your Group Size
The table below records the effect of a 5 mph crosswind at 100, 200, and 300 yards. You may be thinking, “well, I’d never miss a 5 mph let-off.” Consider this — if a gentle 2.5 mph breeze switches from 3 o’clock (R to L) to 9 o’clock (L to R), you’ve just missed a 5 mph net change. What will that do to your group? Look at the table to find out.
Values from Point Blank Ballistics software for 500′ elevation and 70° temperature.
Imagine you have a 6mm rifle that shoots half-MOA consistently in no-wind conditions. What happens if you miss a 5 mph shift (the equivalent of a full reversal of a 2.5 mph crosswind)? Well, if you’re shooting a 68gr flatbase bullet, your shot is going to move about 0.49″ at 100 yards, nearly doubling your group size. With a 105gr VLD, the bullet moves 0.28″ … not as much to be sure, but still enough to ruin a nice small group. What about an AR15, shooting 55-grainers at 3300 fps? Well, if you miss that same 5 mph shift, your low-BC bullet moves 0.68″. That pushes a half-inch group well past an inch. If you had a half-MOA capable AR, now it’s shooting worse than 1 MOA. And, as you might expect, the wind effects at 200 and 300 yards are even more dramatic. If you miss a 5 mph, full-value wind change, your 300-yard group could easily expand by 2.5″ or more.
If you’ve already invested in an accurate rifle with a good barrel, you are “throwing away” accuracy if you shoot without wind flags. You can spend a ton of money on fancy shooting accessories (such as expensive front rests and spotting scopes) but, dollar for dollar, nothing will potentially improve your shooting as much as a good set of windflags, used religiously.
New Wind Reading App — High Power Wind Lab
There is an innovative new Wind-Reading App, the High Power Wind Lab, that can help you figure your hold-offs in all wind conditions. This is available now for iOS devices, and an Android version is coming soon. In this video, our friend F-Class John reviews this sophisticated new Wind App:
In December 2022, New Jersey passed A4769, which effectively declares all public areas to be off limits to firearms, increases permit fees, uses social media posts as grounds to deny permits, and requires gun owners to acquire liability insurance that does not appear to exist in the state. The NRA-ILA, together with the Association of New Jersey Rifle & Pistol Clubs then filed a lawsuit in Federal Court, Siegel v. Platkin, challenging A4769.
The legal challenge to this insane, New Jersey statute is going well. In January, the Federal District Court for New Jersey issued a temporary restraining order prohibiting the state from enforcing a lot of those restrictions. And this week, in a 230-page opinion, the Court preliminary enjoined the state from enforcing much of A4769 until the full legal proceedings are resolved.
The Court examined the new permitting requirements and enjoined the state from requiring individuals to obtain a $300,000 liability policy before they could get a carry license. It also prohibited the state from conducting in-person interviews with the applicant’s character references. The Court also limited the scope of A4769’s provision that allows the state to deny the applicant if it finds that he or she “to be lacking the essential character of temperament necessary to be entrusted with a firearm”. That now means that there is objective evidence that the individual poses a threat, and permitting agents are limited to looking at the applicant’s public statements for statements suggesting that they pose a threat to themselves of the general public.
The Court was even harder on the new so-called sensitive places that were banned under A4769. It enjoined the state from enforcing the bans on the following locations:
— Virtually all private property where the public is generally admitted — i.e., all stores and restaurants;
— Public gatherings and permitted events;
— Parks, beaches, recreational facilities, zoos, and state parks;
— Libraries and museums;
— Places that serve alcohol for on-premise consumption;
— Entertainment facilities and Casinos;
— Airport parking lots and curbside drop-off and pickup;
— Medical offices and ambulatory care facilities;
— Public filming/motion picture locations; and
— Inside vehicles.
The court concluded that A4769 “went too far, becoming the kind of law that Founding Father Thomas Jefferson would have warned against since it ‘disarm[s] only those who are not inclined or determined to commit crimes [and] worsen[s] the plight of the assaulted, but improve[s] those of the assailants.’”
Summer is coming soon, and temperatures are starting to heat up. We are already seeing unseasonably hot conditions in many areas of the country. You never want your barrels to get too hot, which can happen more quickly in summertime. Accuracy suffers when barrels over-heat, and excessive heat is not good for barrel life. So how do you monitor your barrel’s temperature? You can check if the barrel is “warm to the touch” — but that method is not particularly precise. There is a better way — using temperature-sensitive strips. McMaster.com (an industrial supply house) offers stick-on temp strips with values from 86° F to 140° F. A pack of ten (10) of these horizontal strips (item 59535K13) costs $14.06. That’s a mere $1.40 per barrel for strips — cheap insurance for your precious barrels. For best barrel life, you should try to keep your barrels under 120 degrees F.
NOTE: On the McMaster.com website, you’ll need to scroll down to the multi-use “Temperature Indicating Labels”. Then click on the horizontal label and select item 59535K13, as shown below.
Forum member Nomad47 says: “I have temperature strips (bought at McMaster-Carr) on all my barrels. I try not to shoot when the barrel gets to 122 degrees or higher[.]” Here are photos of the McMaster-Carr temp strips on Nomad47’s customized Savage.
Creedmoor Sports now offers handy Temp Strips, with 3-packs for $12.95. These have colored temp range markers so you can quickly see if your barrel is getting too hot. Creedmoor Sports notes: “The temperature range of 30-160° spaced in 10° increments fit most … shooting situations. The 1″-wide 6″-long LCD strip will provide many years of service. In general, we recommend that if a barrel begins to reach 140°, it is too hot and continuing to shoot at these temperatures accelerates barrel wear These barrel temperature strips use a 3M® adhesive and will stick to blued, parkerized and stainless barrels.”
Bad things can happen if your barrel gets too hot. First, with some barrels, the point of impact (POI) will shift or “walk” as the barrel heats up excessively. Second, even if the POI doesn’t change, the groups can open up dramatically when the barrel gets too hot. Third, if the barrel is very hot, the chamber will transfer heat to your loaded cartridge, which can lead to pressure issues. Finally, there’s considerable evidence that hot barrels wear out faster. This is a very real concern, particularly for varmint shooters who may shoot hundreds of rounds in a day. For this reason, many varminters switch among various guns, never letting a particular barrel get too hot.
Neconos.com offers BAR-L Temp Strips that visually display heat readings from 86 to 140 degrees. Think of these strips as compact, unbreakable thermometers that monitor barrel heating.
Put a strip on the side of the barrel and the barrel’s temp will be indicated by a stripe that changes from black to green. There is also a “general purpose” strip that reads to 196 degrees (see bottom row). The Benchrest model strip (86°F to 140°F) is in the middle. These Bar-L temp strips cost $12.70 each, or $25.00 for a 3-pack.
NOTE: These strips can be permanently fixed to the barrel with the heavy-duty clear plastic tape strip provided with the BAR-L Temp strip.
Precision Rifle fans should watch Shooting USA this week. On Wednesday, May 17, 2023 Shooting USA offers a special edition devoted to the 2022 Armageddon Gear AG Cup Invitational. The AG Cup posts the biggest cash money match in Precision Rifle Competition. It’s an elimination format shot over three days of challenging competition on stages of fire created at K and M Precision’s ranges in West Tennessee. Match organizer, Tom Fuller joins John Scoutten to narrate the action and the award of the cash in extended coverage of the match.
This video shows highlights from the 2022 AG Cup, with many stages illustrated.
It’s the fourth year for the richest rifle tournament in the world. The AG Cup is the brainchild of Tom Fuller, the owner of Armageddon Gear, and to say it’s a success is a bit of an understatement. $75,000 in prize money was up for grabs, with a huge cash prize for the overall matche winner.
Shooting USA runs on the Outdoor Channel Wednesdays 9:00 PM Eastern and Pacific, 8:00 PM Central.
No Outdoor Channel on cable? Then you can subscribe to Stream the Broadcast on the internet.
During this week’s Shooting USA special, John Scoutten and Armageddon Gear’s Tom Fuller report the action and interview top precision rifle shooters. The Grand Prize of $20,000 was awarded for the best overall score, based on accuracy and time. There were also substantial cash prizes for each stage winner.
This 2022 AG Cup video has good footage of the stages and views downrange.
Arena Training Facility — 2300 Acres
The 2300-acre Arena Training Facility is a premier shooting facility with multiple shooting ranges from 50m to 2100m. Arena’s 1000-yard covered Known Distance range offers multiple benches, steel and paper targets out to 1000 yards. On Arena’s UKD (unknown distance) range shooters can engage steel out to 2300 yards. This 2100m UKD range boasts a 3-Story Shooting Tower, Air-Conditioned Shoot House, and multiple Positional Challenges.space.
Armaggedon Gear — Tactical Accessories Armageddon Gear, founded by former U.S. Army Ranger Tom Fuller, sells support bags, gun cases, slings, suppressor covers, scope covers, and a wide variety of other accessories popular with the PRS/NRL crowd. Armageddon Gear now provides products to the U.S. Military, Law Enforcement, as well as PRS/NRL competitors.
If you are looking for a modern, extremely powerful semi-auto pistol, you may want to consider the new S&W Performance Center M&P 10mm M2.0 pistol. This boasts a long 5.6″ barrel for extra velocity. The barrel is also ported for reduced muzzle flip and less perceived recoil. The gun would be a very powerful defensive pistol and S&W says it can serve well for hunting.
Smith & Wesson states: “The new Performance Center 10mm was conceived with both the hunter and target shooter in mind. The goal was to build upon the M2.0 10mm series, with the intention of having reduced felt recoil and quicker follow-up shots. Popular features previously seen on other 5.6-inch PC pistols are present in this design and, when paired with the flat-shooting 10mm Auto cartridge, provide the end user a total package for hunting, self-defense, or at the range.”
Building off the success of the M&P 10mm M2.0, Smith & Wesson incorporated new features designed to increase the new Performance Center 10mm pistol’s performance. Chambered in 10mm Auto, this new full-size polymer handgun boasts a ported 5.6-inch barrel to reduce muzzle rise, optic-height tritium night sights for a clear sight picture in low-light conditions, and a Performance Center-tuned flat M2.0 trigger with a crisp break and audible reset.
The new Performance Center 10mm slide is cut for optics and ships with Smith & Wesson’s C.O.R.E. plate system, two 15-round magazines, and four interchangeable palmswell grip inserts. This pistol is made in the U.S.A. and has an MSRP of $749.00.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
⏺ Hard to beat SFP scope at this price — great glass
Here’s a great deal on an excellent ZEISS 6-24x50mm SFP optic, with 1/4 MOA clicks, and handy Z-MOA1 reticle. The glass is exceptional — at the $849.99 sale price, you’ll be hard to beat the quality of this scope. It is a great choice for varmint work and club matches. Here are actual purchaser reviews: “Excellent, A++, Clear glass”; Awesome clarity and the adjustments are spot on — Zeiss V4 scopes are hard to beat for the money”; “Great mid-level scope. Clear Glass with a good no nonsense reticle and easy to operate turrets”.
2. Midsouth — 1500 Fiocchi Small Rifle Primers, $129.99
⏺ High quality primers in bigger quantity 1500 pack
You may not have tried Fiocchi primers before, but these are effective and very reliable. These primers are manufactured on modern equipment using the best available materials. Folks, please note, this is for 1500 (one thousand five hundred) primers. Fifteen hundred. Nearly all other primer sellers ship packs of 1000 primers. So you get 50% more than normal. This is the equivalent of $86.66 for 1000 primers — a very good deal these days. NOTE: They are somewhat harder than average and work well for military firearms with floating firing pins.
3. Precision Reloading — Wilson Products Sale Through 5/18/22
⏺ Great products with good discounts, but act soon, sale ends 5/18/23
We highly recommend Wilson products. This editor uses a Wilson case trimmer and Wilson micrometer inline seating dies. They work great. Right now you can get significant savings on ALL Wilson products at Precision Reloading. Save on Case Trimmers, Seating dies, case gauges, bushings, deburring tools, as well as combo tool/die kits.
⏺ Great Deal — 20% Off reloading kit with 500 free bullets and free shipping
Here’s an excellent reloading package with everything you need to start handloading cartridges. And right now you can save 20% and get free shipping. With this Hornady Lock N Load Deluxe Classic Reloading Kit you get the Classic single-stage press, powder measure with stand, digital scale, hand priming tool, OAL gauge tool, calipers, loading block, bullet release “hammer”, powder trickler, funnel, chamfer/debur tool, shellholder pack, die bushings, lock rings, Hornady Reloading Manual and much more. Folks, this is a great bargain at $319.99! The same Hornady L-N-L Classic Press Kit is $369.97 on Amazon, fifty bucks more. Plus you get 500 FREE bullets from Hornady with the purchase of this kit.
5. MidwayUSA — Leupold 12-40x60mm HD spotter, $1199.99
⏺ Big discount on very good spotter for hunters and field shooters
Here is an excellent spotting scope for hunter and tactical shooters who have to carry lots of gear in the field. This Leupold 12-40x60mm HD spotter is compact and relatively light weight. The prism-less Folded Light Path (FLP) system uses mirrors to compress a long optical system into half its typical length. And this scope has great glass with best-in-class eye relief. Right now save $300.00 on this spotter. NOTE: This is a factory-refurbished item that may have a slight blemish, but it comes with the full lifetime Leupold warranty.
Here’s a patriotic, American-Flagged theme rimfire starter rifle for a junior marksman in training. Right now KYGUNCO has the Keystone 2d Amendment Crickett Precision .22 LR Rifle, complete with scope and bipod, for just $392.99. Plus, Keystone is offering a $75 factory rebate through 5/31/2023. That lowers your net cost to $317.99. If you don’t need the scope or bipod you can also get the basic Crickett Precision Rifle in Flat Dark Earth for $292.99, or $217.99 after the $75.00 rebate. These rifles feature adjustable cheekpiece and adjustable LOP with spacers. REBATE Details.
⏺ Very handy conversion — shoot .22 LR with your AR15
Save money when training with your AR15 by using this CMMG AR15 .22 LR Conversion Kit. You get a complete new rimfire bolt mechanism plus three (3) magazines that fit .22 LR cartridges. Right now this kit is on sale at Brownells for $179.99. Then use Brownells Code CART20 during check-out to lower the net cost to just $159.99. That’s a great deal. You can get decent .22 LR ammo for under ten cents a round. Centerfire .223 Rem ammo can easily cost $0.50 per round (or more), so this kit will pay for itself after just 400 rounds. CMMG recommends Federal 36gr plated round-nose ammo for best performance.
8. Graf & Sons — CCI .22 LR Ammunition from $3.99/50
⏺ Quality CCI .22 LR ammo in stock at very good prices
With the growth of NRL22, PRS 22, and rimfire F-Class, more and more shooters are competing with rimfire rifles. And with action steel matches, rimfire pistol shooting is hugely popular these days. Thankfully, its still possible to get good rimfire ammo at reasonable prices. At Graf’s you’ll find good CCI .22 LR ammunition starting at just $0.08 (eight cents) per round. CLICK HERE for CCI .22 LR Deals.
Florida Governor Ron DeSantis has signed Florida SB 214, a law that bars credit card companies from implementing a special Merchant Category Code (MCC) for credit card purchases at firearm retailers. This new Florida law will esure that the privacy of customers at firearm retailers remains protected and is not collected to be used in an illegal backdoor firearm registry.
“Governor DeSantis is standing up against a ‘woke’ initiative … to use lawful private transactions as a means to usher in gun control,” said Lawrence G. Keane, NSSF Senior Vice President and General Counsel. “No law-abiding American should be subjected to having their name and financial data being added to a government-accessible watchlist simply for exercising their Second Amendment right to keep and bear arms. Governor DeSantis is ensuring that Floridians won’t be held captive by the radical ‘woke’ antigun agenda that seeks to weaponize credit cards in gun owners’ wallets against them.”
Florida’s SB 214 will ensure that the names of law-abiding firearm owners are not illegally recorded on a list or registry. The law also prohibits a payment settlement entity, merchant acquiring entity or third party settlement organization from assigning a MCC classifying a merchant as a seller of firearms or ammunition. And SB 214 authorizes the Florida Dept. of Agriculture and Consumer Services to investigate alleged violations of the law.
BACKGROUND: In late 2022, the International Organization for Standardization (ISO) announced it would create a unique MCC, at the behest of Amalgamated Bank, which has been described as the Left’s Private Banker, that would allow credit card companies to monitor transactions at firearm retailers. Credit card companies suspended plans to implement the use of unique firearm retailer MCCs after significant opposition by NSSF and several state governments.
Idaho, Mississippi, and West Virginia Have Passed Similar Legislation
Florida joins West Virginia, Mississippi and Idaho in enacting laws to protect firearm purchasers’ privacy when using credit cards at firearm retailers. Legislation similar to Florida’s law is pending in Congress.
Fighting Back — 24 State Attorney Generals Oppose New Code
The Attorney Generals (AGs) of 24 states have sent letters to Credit Card company CEOs requesting elimination of the new Merchant Category Code (MCC) for gun stores being implemented by Visa, Mastercard, and American Express. These AGs of 24 states stated their intent to “marshal the full scope of our lawful authority” to block the use of the new Code to be applied to gun and gun-related sales.
The AGs sent a letter last week to the CEOs of American Express, Mastercard, and Visa. The AGs explained that the Code could be misused and lead to a de facto gun registry: “Creating and tracking this data only matters if your institutions are considering using that information to take further, harmful action—like infringing upon consumer privacy, inhibiting constitutionally protected purchases by selectively restricting the use of your payment systems, or otherwise withholding your financial services from targeted ‘disfavored’ merchants.” READ MORE.
The AGs added that the Code would not be able to distinguish between actual firearms sales vs. hunting/outdoor accessories, leading to problems for consumers: “This categorization would not recognize the difference, for example, between the purchase of a gun safe and a firearm. Nor would it capture firearm purchases made at department stores, resulting in arbitrarily disparate treatment of ‘gun store’ merchants and consumers.”
Tactical competitor Zak Smith stores his elevation and wind drift data on a handy laminated data card. To make one, first generate a come-up table, using one of the free online ballistics programs such as JBM Ballistics. You can also put the info in an Excel spreadsheet or MS Word table and print it out.
Above is a sample of a data card. For each distance, the card includes drop in inches, drop in MOA, drop in Mils. It also shows drift for a 10-mph cross wind, expressed in inches, MOA, and mils. Zak explained that “to save space… I printed data every 50 yards. For an actual data-card, I recommend printing data every 20 or 25 yards.” But Zak also advised that you’ll want to customize the card format to keep things simple: “The sample card has multiple sets of data to be more universal. But if you make your own data card, you can reduce the chance of a mistake by keeping it simple.”
Once you have the card you can fold it in half and then have it laminated at a local office store or Kinko’s. Keep this in your pocket, tape it to your stock, or tie the laminated card to your rifle. If you regularly shoot at both low and high elevations, you may want to create multiple cards (since your ballistics change with altitude). To learn more about ballistic tables and data cards, check out the excellent “Practical Long-Range Rifle Shooting–Part 1″ article on Zak’s website.
Scope-Cover Mounted Ballistics Table
Another option is to place your ballistics card on the back of the front flip-up scope cover. This set-up is used by Forum member Greg C. (aka “Rem40X”).
With your ‘come-up’ table on the flip-up cover you can check your windage and elevation drops easily without having to move out of shooting position.
Greg tells us: “Placing my trajectory table on the front scope cover has worked well for me for a couple of years and thought I’d share. It’s in plain view and not under my armpit. And the table is far enough away that my aging eyes can read it easily. To apply, just use clear tape on the front objective cover.”
There’s a simple, inexpensive “miracle device” that can cut your groups in half. If you’re not using this device, you’re giving away accuracy. The “miracle device” to which we refer is a simple wind indicator aka “windflag”. Using windflags may actually improve your accuracy on target much more than weighing charges to the kernel, or spending your life savings on the “latest and greatest” hardware.
Scope-Cover Mounted Ballistics Table
