The Tactical Rifle Shooters Facebook Group recently showcased tools used to measure case headspace before and after “bumping” the shoulder. After a case is fired, hand-loaders who full-length size their cases will typically bump the shoulders back anywhere from .001″ to .0035″, depending on the rifle and application. With our 6mmBR and Dasher cases we like about .0015″ bump.
You want the amount of case sizing and bump to be the same for all your brass. To ensure uniformity, it makes sense to measure your cases before and after the FL sizing process. When we have time, we check every case. Other folks will simply check the first 3-4 cases coming out of the FL sizing die to ensure the FL die setting is correct and delivering desired headspace/bump.
1. Whidden Gunworks Shoulder Bump Gauge
There are a variety of tools that can be used to measure shoulder bump. Our favorite is a special cartridge-specific bushing made by Whidden Gunworks. The Whidden Shoulder Bump Gauge enables you to adjust your sizing die to the desired measurement. The bump gauge is attached to your calipers with a set screw and determines the measurement from the base to the shoulder of the case. The photo below, from Tactical Rifle Shooters, shows the Whidden Bump Gauge for the .375 CheyTac cartridge.
2. Dave Manson Vertical Comparator with Dial Read-Out
Dave Manson states: “This tool was designed to make life easier for the advanced shooter and re-loader by allowing precise measurement of ammunition, case, and chamber headspace. With this information, the re-loader will be able to fine-tune clearances and fits between his ammunition and chamber, with resultant improvements in accuracy and case life.” The functions of the Comparator are:
1. Measure headspace of factory or reloaded ammunition
2. Quantify chamber headspace by measuring headspace of a fired case
3. Ensure minimal shoulder set-back when setting up re-loading dies
4. Compare base-to-ogive length to ensure consistent bullet-to-rifling relationship.
In addition to the Dial Indicator and Stand, the $130.00 Vertical Comparator is supplied with multiple Datum Blocks of precise length and inside diameter (.3300″/.3750″/.4000″/.4375″). MORE INFO HERE.
3. Hornady L-N-L Headspace Comparator System
Hornady makes comparator gauges matched to the red comparator holder that mounts on your caliper. These Lock-N-Load Headspace Gauges are inexpensive. You can get a set of five gauges for $31.99. Hornady explains: “The Lock-N-Load® Headspace Comparator… gauge measures variations in brass before and after firing or re-sizing. It allows for headspace comparison between fire-formed brass and re-sized brass.” IMPORTANT: Hornady states: “To determine the proper bushing diameter for your cartridge, simply add the neck diameter and the shoulder diameter and divide that number by two. Use the bushing closest to that number.” Hornady offers five: .330″, .350″, .375″, .400″, and .420″.
One tip — We have found the Hornady gauges may vary a little from unit to unit even with the same nominal size. If you have more than one gauge for the same cartridge, test each on your brass — you may then note a slight difference in your bump measurements.
4. Pistol Brass Case DIY Bump Gauge
Last is a “field expedient” set-up if you do not have any of the comparator tools shown above. A sized .45 ACP case (or other suitable pistol case) can be used to measure shoulder bump. The mouth of the pistol case sits on the shoulder of your rifle cartridge brass.
Make sure the .45 ACP case is trimmed square and that it is round. We recommend you first run it through an expander, then size it, trim it and chamfer. Next, take the .45 ACP case and slip it over the neck of a fired, unsized rifle case with the primer removed. Align the two cases between the jaws of your calipers and note the length from rim to rim (See left photo below).
OK, now you have the length for a fired rifle case BEFORE sizing. Next, take a full-length sized rifle case (without primer) and do the same thing, placing the .45 ACP case over the neck of the FL-sized case (Right Photo). The difference between the two numbers is the amount of “bump” or set-back you are applying to the shoulder. Here the difference is .0015″. The amount of bump you need varies with your chamber and your load, but .0015-.002″ is a good initial setting.
MasterPiece Arms (MPA) has a new chassis system — the “MPA Matrix”. Derived from the MPA BA Chassis, the MPA Matrix Chassis offers a “multitude of configurations in grips, thumb rests, and trigger finger supports”. MPA claims the grip and hand area has over 100 different variations. The MPA Matrix has a fore-end two inches longer than the standard BA or BA Competition Chassis. Overall, the Matrix is fairly heavy, at 6.4 pounds, and pretty expensive, with a $1250-$1450 MSRP (depending on options). By contrast the MPA BA Hybrid Chassis costs $925.00 and weighs 3.5 pounds (without recoil pad).
CLICK Image for large MPA Matrix Photo:
There are significant design differences between the MPA Matrix and MPA BA Hybrid (below). The Matrix, at 6.4 pounds, is also much heavier than the 3.5-lb BA Hybrid. Given that many PRS/NRL competitors favor heavier rifles for greater stability (and less felt recoil), the Matrix’s extra mass is probably a good thing.
The MPA Matrix features five different grip options (3 swept and 2 vertical), three different thumb-rest designs and four different trigger finger supports. That’s great for shooters who like to keep their thumb forward on the bolt side of the action. However, looking at the chassis, we’re really not sure we like the way the Matrix encircles the grip area. You’ve got hard metal behind the grip. The Matrix appears set up for resting the thumb of the trigger hand alongside the action. That can work for sure, but we think some shooters will prefer a more conventional vertical grip you can wrap your thumb around. A conventional grip will also have recoil cushioning for the web of the hand. See the BA Hybrid chassis for comparison. This Matrix is really VERY different in the grip area. But if you don’t like the Matrix, there are certainly other stock options available.
The new Matrix Chassis is designed for Remington Short Actions and Rem clones. The Matrix does offer good adjustability — the buttstock has an adjustable cheek riser and length of pull adjusts from 13.5 to 14.75 inches. Plus, the recoil pad adjusts for height and cant. You can get either an adjustable rear monopod or a bag-rider configuration. As you’d expect, the MPA Matrix has M-LOK slots along the fore-end sides and barricade stop holes along the bottom.
What was the concept behind the Matrix chassis? MPA’s President, Phil Cashin, states: “One of the things that we have seen in precision rifle shooting over the past couple of years is how many different methods a shooter used to engage a stock or chassis. Due to variations in hand size, finger thickness and length, as well as shooter preference on how they want to engage the chassis or stock, we’ve seen a lot of inconsistencies among the shooters in how they engage the rifle and where they position the pad of the trigger finger with the shoe of the trigger. This inspired us to create a system that would provide a more custom fit procedure for our customers by creating a chassis with more customized configurations.”
The MPA Matrix Chassis (MSRP $1250-$1450) is available in eight Cerakote colors: Graphite Black, Flat Dark Earth, Burnt Bronze, Tungsten, Gunmetal, Sniper Green, NRA Blue, and USMC Red. Custom H Series Cerakote colors are an additional $135, while camo patterns are $450 extra.
Over 100 Top Shooters Competed at the 2019 IBS 1000-Yard Nationals.
Match Report by Blake Wilson, IBS Match Editor
The International Benchrest Shooters (IBS) 1000-Yard Nationals were, once again, a success. The Hawk’s Ridge Gun Club in Ferguson, North Carolina, hosted a flawless event over Labor Day Weekend. Over 100 of the nation’s top shooters, from 19 states, gathered to compete for the crown of “National Champion”. Events such as this take an army to make work and the 2019 IBS Nationals were no different. But the event was a big success, despite some challenging conditions on Day One. We congratulate Glenn Hiett, who shot superbly to win BOTH the Two-Gun Overall AND Light Gun Overall 2019 Championships. Well done Glenn! We also recognize IBS Heavy Gun Overall Champion Sam Edwards.
Ideal Conditions Change Quickly on Saturday
Hawk’s Ridge is a very beautiful range. But “The Ridge” can sometimes have very tricky, unfriendly winds. Labor Day weekend 2019 was no different. Conditions started near perfect early Saturday morning — the day began with mild temps and wind flags hanging low. Things then changed for the worse. The great conditions only lasted a handful of relays as winds became unpredictable, showing the competitors how tough Hawk’s Ridge can be. Tiny groups and high scores quickly become scarce and shooters began to feel the effects of switching, hard-to-read winds.
2019 IBS 1000-Yard National Championships Top Competitors
Two-Gun Overall Champion: Glenn Hiett
Light Gun Overall Champion: Glenn Hiett
Heavy Gun Overall Champion: Sam Edwards
Highest-Placing Female: Donna Matthews
Junior Champion: Hunter Hall
Light Gun Group Winner: Scotty Powell
Light Gun Score Winner: Robert Banner
Heavy Gun Group Winner: Sam Edwards
Heavy Gun Score Winner: Tod Soeby
1000-Yard Nationals Course of Fire
IBS 1000-Yard Nationals is a 6-target Aggregate event over a two-day period for Light Gun and Heavy Gun. Light Guns must not exceed 17 lbs. weight and shoot 5 rounds per target. Heavy Guns have no weight limit and shoot 10 rounds per target. At the Nationals each shooter gets three Light Gun targets and three Heavy Gun targets. The results are aggregated together to determine Two-Gun Overall, Light Gun Overall, Heavy Gun Overall. There are also separate awards for Light Gun Group and Score and Heavy Gun Group and Score.
Day 1 included a Light Gun target, Heavy Gun target and ended with a second Light Gun target. After two Light Gun targets, several shooters were feeling great about their chances — Robert Banner, Brian Buttrick, and Dan Pantinski all had 99 scores, just one from perfect. Jerry Powers had the best Day 1 Light Gun Agg, a 3.472″ average (0.33 MOA). Justin Morrow shot the smallest Light Gun Group — 2.604″. That works out to a very impressive 0.249 MOA at 1000 Yards!
Donna Matthews shot this excellent 50-2X, 3.257″ LG target on Saturday.
Participants Rewarded with Famous Hawk’s Ridge BBQ
As Saturday came to an end, the smell of chicken had taken over the range. Range owner Mike McNeil is known for his famous secret sauce BBQ chicken. From the comments of the crowd as they sunk their teeth into chicken, potato salad, fresh baked desserts — they had no complaints whatsoever. Bellies full, guns cleaned, everyone headed to their rooms for some much anticipated rest.
More Readable and Consistent Conditions on Day 2
Feeling refreshed and excited for the challenge and anticipation for the final day, shooters showed up raving about the BBQ chicken and ready to shoot. For the most part, Day 2 was much more forgiving and calm than Day 1. The format was the opposite of Saturday — Heavy Gun relays were conducted first and last with Light Gun in the middle.
Perfect scores, small groups and everything in between was shot. Shooters made adjustments and for the most part they worked. But some made the wrong choices and the price was paid.
IBS 1000-Yard Nationals Equipment List (CLICK to Zoom): CLICK PHOTO to view LARGE Equipment List.
Editor’s Comment: Looking at the Two-Gun Top 20 Equipment List above, we see the Light Gun Ranks were dominated by 6mm Dashers, and 6 BRAs (BR Ackleys), most using Hodgdon H4895 powder. There were quite a few 300 WSMs among the top Heavy Guns. Krieger, with 10 selections, was the most popular barrel choice, followed by Bartlein (4), and Brux (3).
More than Marksmanship — Competitors Appreciate the Camaraderie
These events are always a pleasure to attend. You get to put faces with the names you’ve heard, compete against the best across the country, and see how you stack up to them. It’s fun to shake hands with the likes of Tom Jacobs (Vapor Trail Bullets past National Champion), Bart Sauter (Bart’s Bullets and current holder of 600-yard records), Mike Wilson (Current Light Gun Group and score record holder), the Hornady Team and many more.
This wonderful sport has no shortage of great men and women from many different states and cultures. Match director David Matthews, as well as Robert Smithey and the entire Hawk’s Ridge Gun Club staff, definitely showed how to put on a nearly flawless event. We cannot forget Kent Bratten for his tireless efforts in finding prize donations for the match. The IBS gives a special thanks to all our great sponsors who make the prize tables so abundant. Thanks for your generosity!
Can sustained rapid-fire shooting with no cool-down period wear out a quality barrel more quickly? The answer is “Yes” according to Forum member LCazador, who did an interesting comparison test with two .243 Winchester barrels. He started off with two, identical, match-grade HV taper stainless barrels. Both were NEW at the start of testing, and LCazador shot the same load through each: 95gr match bullets with 38 grains of Hodgdon Varget. After giving both barrels the same, gentle 20-round break-in, 300 rounds were then fired through each barrel — in very different ways. Barrel condition and wear were monitored with a borescope.
Barrel One — Slow Fire, Cool Down Periods, Cleaning Every 50 Rounds
At the end of the 300-round test, Barrel One looked brand new. There was none of the severe fire cracking found in Barrel Two. This barrel was shot no more than 10 times without a cool down and firing was done at a much slower pace. Cleaning for this barrel was done every 50 shots.
Barrel Two — Fast Firing, No Waiting, Cleaning Every 100 Rounds
The second barrel, which received hard use and minimal cleaning, was severely damaged with severe fire cracking at the leade and throat. As a result, the barrel had to be re-chambered. This barrel was shot 100 rounds at time without cleaning and was shot up to 20 times in succession without a cool down.
LESSON LEARNED — Heat Kills Barrel Life
Don’t let your barrel get too hot, and keep it clean. One afternoon can ruin a barrel!
Monitoring Barrel Wear with Borescope
Some folks worry too much about what their borescopes reveal — many barrels do not have to be “squeaky clean” to perform well. In fact some barrels run better after ten or more fouling shots. However, a borescope can be very helpful when your barrel starts losing accuracy for no apparent reason. Forum member FdShuster writes:
“A borescope is a positive way of backing up your suspicions when the rifle starts to throw an occasional (soon followed by more frequent) wild shot. Using the scope is also an excellent way to determine that the cause is barrel wear and not simply a need for a concentrated cleaning session to remove built up copper and more importantly, carbon fouling.
I’ve had a few barrels that gave every indication of being shot out. But I ‘scoped them out and found the cause to be nothing more than requiring a good cleaning. They then returned to their usual performance. There’s no guessing involved when you are able to get ‘up close and personal’ using the scope. The borescope also provides an excellent view of the all-important condition of the crown. My borescope is one of the most valuable investments I’ve ever made.”
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. CDNN — Ruger American .30-06 Hunting Rifle, $319.99
Even with so many new cartridge types, the venerable .30-06 Springfield remains a trusted and effective hunting round. Moreover, you can find good .30-06 hunting ammo at most any sporting goods store. Whether you’re looking for an affordable hunting rifle or perhaps a first rifle for a family member, check out this .30-06 Ruger American Rifle with Wolf Camo finish. CDNN’s current sale price is just $319.99 — a great bargain. Ruger offers a great warranty.
2. Amazon — Teslong Digital Borescope, $49.99
The impressive Teslong digital borescope offers capabilities that rival optical systems costing $700 or more. This compact, electro-optical, cable-type borescope outputs sharp, high-resolution images and VIDEO to desktop computers, laptops, as well as Android tablets and smartphones. Check out our Full Teslong Review complete with inside-the-barrel videos. At $49.99 this is a great value. NOTE: This unit does NOT currently work with iPhones and iPads.
3. Amazon — Custom Damascus Hunting Knife, $59.99
Having a good hunting knife on your hip when you’re out in the field is a necessity. Whether dressing your game, making kindling, or getting out of dangerous situations, the importance of having a good knife can’t be overstated. If you’re looking for new one or maybe a gift for that new young hunter in your life, take a look at this custom Damascus hunting knife complete with leather sheath. It can do a myriad of tasks while looking great with that Damascus steel blade.
4. Caldwell — 30% Off FieldPod Magnum, TreePod, & ChairPod
Caldwell makes some excellent, adjustable field supports for hunters and varminters. Right now AccurateShooter readers can save 30% on Caldwell’s Fieldpod Magnum, Treepod, and Chairpod shooting rests. The Treepod is ideal for treestand hunters. The versatile Fieldpod Magnum is stable and sturdy yet can be easily carried into the field. The ChairPod provides comfortable seating with adjustable rifle rest. You can save big with this special 30% off discount for AccurateShooter.com readers and Forum members.
For example, the excellent Fieldpod Magnum is reduced from $179.99 down to $125.99 — that’s a GREAT deal. The 30% discount appears when you add an item to the Caldwell shopping cart and then proceed to check-out.
5. Natchez — ChargeMaster Lite Powder Dispenser, $199.99
Precise powder dispensing is critical for accurate loads. Among the many electronic scale/dispensers on the market, RCBS’s ChargeMaster Lite is a very good choice. This week Natchez is selling the ChargeMaster Lite for only $199.99. That’s a great price — almost $40 cheaper than Amazon. If you’ve been waiting for the right time to buy, don’t delay.
For a safe (and ethical) hunt, you should know the precise distance to your prey. We recommend a laser rangefinder. Thankfully, you don’t have to spend a small fortune for a good LRF these days. The Vortex Ranger 1500 is rated to 1500 yards, with built-in Angle Correction. The Range 1500 is also great for ranging targets during UKD tactical matches. Right now this Vortex LRF is on sale for just $329.00 on Amazon. And for $20 more ($349.00) you can pick up the Vortex Ranger 1800 rated to 1800 yards.
7. Bullet Central — Bix’N Andy TacSport Triggers
Bix’N Andy competition triggers are considered superior for good reason. However they’re not always the best for PRS matches where it can get wet and dirty. That’s why Bix’N Andy introduced the TacSport Series Triggers which feature a durable housing built for extreme environments. These are better for shooting in wet or dusty conditions. Choose from a variety of Bix’N Andy trigger shoes.
8. Grafs — Browning Hunting Ammo Sale
It’s hunting season so you’ll want to grab some effective hunting ammunition at attractive prices. Head over to Grafs.com for the current Browning Hunting Ammo Sale. The sale includes nearly all Browning hunting ammunition types, so you should find good options for all popular calibers/chamberings.
Most shooters clean their barrels and bolts but many fail to properly clean their chambers. Don’t make this mistake — clean your chambers regularly on both hunting and match rifles. We recommend a dedicated chamber cleaning kit. The Sinclair Chamber Cleaning Tool Kit provides everything you need to properly get debris, powder and grease out of the chamber. That helps ensure every round loads and extracts properly.
10. Amazon — 12″ x 12″ Splatter Grid Targets, 10 for $9.99
This 12″x12″ Splatterburst Target combines splatter shot marking with a grid background, with five aiming points. The bright neon shot circles make it easy to see your shots. And the handy grid lets you quickly estimate your group size. Get a 10-pack for $9.99, or a 25-pack for $17.99 (better deal). This particular target has earned rave reviews — 87% of verified buyers gave this a FIVE-Star rating.
Gavin Gear of UltimateReloader.com has been testing the AutoTrickler V3, a microprocessor-controlled powder-dispensing system that works with super-precise force restoration scales. Combining an automated powder measure with a motorized trickler, the AutoTrickler can deliver a full powder charge, with single-kernel precision, in a few seconds.
AutoTrickler inventor Adam MacDonald has developed numerous enhancements to his powder-dispensing system, which will be incorporated into the latest AutoTrickler V3 production version. Gavin Gear reviews all these important new features in a new video released on October 6, 2019. Check it out:
Key Enhancements for AutoTrickler V3 Production Version:
1. Improved, Larger-Capacity Clear Powder Hopper
The new clear plastic powder hopper is much larger than the old Lee red-colored hopper it replaces. That’s good news for folks loading large magnum cartridges.
2. Taller Glass Powder Cup and Improved Diffuser
When the main powder charge comes down from the hopper, it passes through a plastic “diffuser” into a glass cup. Both these products have been enhanced.
3. New Simple V-Shaped Stop for Powder Cup
With the V3, it is easier to center the powder cup on the scale unit. Gavin explains: “Instead of a ramp and ‘landing pad’, the cup stop is now a super-simple angled back stop. If you push the cup back towards the center of the pan, it will guide itself into the centered position every time.”
Here is the original AutoTrickler V3 Video Report from UltimateReloader.com:
Were in prime hunting season now. Here’s an advanced product that can help you track down a prize buck. The Leupold Thermal Optics (LTO) Tracker 2 is a hand-held, heat-detection device designed as a hunting tool for game observation and game recovery. A high-performance 7X thermal spotter, the LTO Tracker 2 can detect heat sources out to 600 yards. The advanced thermal imaging engine fires up in less than five seconds and offers fast 30hz frame rates and 240×204 display resolution. The LTO Tracker 2 is compact and weighs just 7 ounces. It is listed as 100% waterproof, fogproof, and shockproof.
The hand-held unit features a 14-degree field of view and 7x digital zoom. Five different thermal filters provide multiple viewing options. The LTO’s CR123 lithium battery provides more than 10 hours of continuous use. A user-controlled reticle allow the user to quickly pinpoint a game animal or other thermal source. The latest LTO Tracker 2 is $526.14 on Amazon, while Leupold’s High-Definition (HD) LTO Tracker 2 HD unit retails for around $950.00.
Photo shows original model LTO Tracker. The newer Tracker 2 is 7X vs. 6X magnification.
Use LTO Tracker 2 Thermal to Track Animals and Guide your Hunt
From checking your ingress path to your stand, to helping track wounded animals, the LTO Thermal can perform many tasks. Hunters can use the LTO Tracker 2 to spot their quarry’s heat trail and efficiently recover the downed animal. Using the LTO Tracker 2, hunters can also plan their walk to their stand or blind with minimal risk of scaring off game. Where legal, varmint or feral hog hunters can use the LTO Tracker 2 to identify their quarry, leading to more successful hunts.
Verified Purchaser Field Test Review:
“I have a night vision scope I use for hunting hogs and it works well up to about 150 yards. I purchased the Leupold LTO Tracker 2 hand-held thermal monocular for scanning and identifying critters outside the range of the night vision scope. The first night I used the device, I was able to see rabbits playing at 200 yards, two deer eating in a soybean field 315 yards, and I was able to see hogs at 150 yards (5 yards inside the woods before they came out into the open field). Without this device, I would not have known the hogs were there and would have moved to another location. It is somewhat pricey, but good equipment is not cheap. This is a good product and you do not need a degree from MIT to use it.” — Wm. Thompson (Amazon Buyer).
“We see thermal as a vital tool in any hunter’s kit, just like binoculars or laser rangefinders,” said Tim Lesser, vice president of product development for Leupold & Stevens, Inc. “For observation and recovering downed game, the LTO Tracker will help hunters find success in the field.”
Chris Nichols with potential world record (1.297″ 4-Target Agg) Heavy Gun Targets!
Report by Bart Sauter, Bart’s Custom Bullets
Chris Nichols is one of the best 600-yard shooters in the game. This 2019 season he compiled one of the most impressive mid-range benchrest seasons ever. Check out the stats — Chris’s nine-match, Two-Gun Group Aggregate (Agg) for the year is 1.983″! That’s under two inches average at 600 for 72 record targets fired in competition. Many 600-yard shooters aspire to shoot a single, 4-target Agg that measures 1.983″, but doing that for 72 targets is amazing!
And of the nine matches Chris shot, he took SIX Overall Two-Gun wins — a 67% win ratio. And in the process Chris also shot what is possibly the smallest 4-target Heavy Gun Agg ever recorded — 1.297 inches. Hey readers — that Agg works out to 0.206 MOA average group size — well under quarter-MOA for four, 5-shot groups at 0.34 MILES (600 yards)!
Chris with 0.665″ group at 600 yards. This is the smallest HG group fired in the IBS in 2019.
The Equipment: 6mm Dasher Light Gun and Heavy Gun
Chris likes to run 1.550 stainless steel Bat “B” actions, Jewell triggers, Brux or Bartlein barrels. He prefers wooden stocks as he feels they produce a better resonance for Long Range rifles. Chris has his own stock design crafted by Johnny Byers. Imagine a Wheeler LRB stock front half mated with an McMillan ST 1000 rear section and you have Chris’ stock! It features a Wheeler-type, 4″-wide fore-end with an ST 1000 low-comb profile in the back. Both Light Gun and Heavy Gun sport Vortex 15-60x52mm Golden Eagle scopes mounted with Harrell’s double screw tall rings. Chris does NOT use either muzzle brake or tuner.
Here is Chris at his home range with his Light Gun (17 lbs. max).
Chris Nichols’s Heavy Gun is a true heavy coming in at around 42 pounds. It was responsible for the HG Agg of 1.297″ (potential new world record). His season-long aggregate with his Heavy Gun was 1.861″ for 36 targets! This rifle has similar components as his Light Gun, except the barreled action rides in a barrel block in a McMillan HBR 50 BMG stock.
Both rifles ride a top of a Sinclair competition rest with a Protector DR Flat Top rear bag. When Chris goes to HG gun he simply switches tops (made by Daniel Greenlaw) on his front rest to accommodate the larger forend. As Chris says ,” This keeps things simple and exactly the same. ” Just the way he likes it.
Reloading for the 6mm Dasher
Chris’s load choice for both LG and HG is Hodgdon Varget pushing 105gr Berger VLDs. He uses CCI 450 primers, seated with an old Lee hand primer. When it comes to reloading, Chris likes to keep things as simple as possible. “If people saw me reloading they’d probably laugh!” Chris revealed that he doesn’t anneal or clean his cases. He just sprays them down with Hornady One Shot Case Lube, resizes, then runs a brush down the necks, and cleans the primer pockets. The only cleaning his cases get is when he wipes the lube off of them. Chris WILL trim and chamfer as needed.
Chris says seating consistency is critical — he uses a K&M Arbor press with force dial indicator. I asked if there were certain numbers he looks for when seating. Chris replied, “I’m only concerned with consistency and not a certain number, 5 pounds or 60 pounds. It doesn’t matter as long as they are the same. I take what the brass gives me.”
Tuning the 6mm Dasher for Record-Setting Accuracy
I asked Chris what was special about his Dasher and how he kept it tuned and so competitive? His reply is something all shooters should pay careful attention to: “[Success] starts with having a good reamer, bullets and barrels. But more than that, it’s KNOWING your Cartridge, KNOWING your bullets, and KNOWING your barrels! I’ve shot it so much I just know what to do. I’m comfortable with it. I know how to get it to shoot and when it’s not, I have a pretty good idea how to get it back in tune. Once you know your equipment, then you can learn how to get the most out of it.”
Chris has a range at his house and he tunes at 300 yards. He looks for consistent, 300-yard 5-shot groups of 0.600″ or less! He wants to see nice round groups! Not groups with four in and one out or vertical strings. Chris starts by finding “touch” (to the lands) then he moves the bullets .002″ off the lands and begins tuning. Chris has found that usually somewhere around .008-.012″ off the lands is where his Berger 105gr VLDs shot best. I asked Chris what’s the biggest factor contributing to his success? He said, one big thing was that he can do his own work. That’s a huge advantage.
Look for Accuracy First, Velocity Second
Early on Chris had it in his mind that for a 6mm Dasher to shoot best he needed to achieve a certain velocity range — 2990 to 3030 FPS. The problem was he wasn’t paying attention to what the target was telling him. He’d get to the speed he was looking for but the accuracy wasn’t there. Once he started slowing the speeds down and giving the barrel what it wanted, then the accuracy came! Also with the slower speeds came better consistency.
Chris Nichols’s Tuning Tips for 6mm Dasher:
• Take consistency over speed.
• Only change one thing at a time and run it to the ground.
• Every barrel is a little different, so give it what it wants.
• Pay attention to what your target is telling you.
• Don’t be afraid to REDUCE your powder load.
Chris Nichols’s Advice for New Shooters
Chris says the best thing a new shooter can do is align themselves with knowledgeable people, and if they will talk, listen! Next, be ready to buy the best equipment or be ready to buy it twice. Chris also says: “Don’t cheap-out on sighters. Sighters need to be just as good as your record rounds.”
In the Beginning — Learning the 600-yard Benchrest Game
Chris’s shooting career began in 2012. His first win came in 2014. He was shooting beside guys like Sam Hall, Larry Isenhour, Mike Hanes, Jeff Godfrey James Coffey, and Chad Jenkins, who are very tough competition indeed. He said when he won he was ecstatic and he’ll never forget it! That first trophy had him feeling like he’d just won the Nationals! Chris shot a 6BR for the first two years of his career, before switching to the 6 Dasher. I asked him why he switched? He said, “guys were starting to shoot the Dasher and winning with it!”
I asked Chris if he had a mentor and he said, “not really”. He learned by watching the guys who consistently finished Top 5 at matches and occasionally asked them a question. Not two questions, just one! Chris didn’t want to push his luck by asking too much. Then Chris would take that information and test it and apply it to his own shooting. Chris says, “he learned mainly by the ‘school of hard-knocks’. The good thing about learning that way is it sticks with you!”
Chris Nichols 2019 600-Yard Win List and Statistics
The National Rifle Association (NRA) declared victory in San Francisco last week, after Mayor London Breed formally disavowed key provisions of a municipal resolution that signaled the blacklisting of contractors linked to the Second Amendment advocacy group.
On September 3, 2019, the San Francisco Board of Supervisors, which runs the City and County of San Francisco, unanimously approved a resolution that called for the City to investigate ties between its contractors/vendors and the NRA. The SF Board’s resolution declared the NRA was a “domestic terrorist organization.” Not surprisingly, the NRA sued.
On September 9, 2019, less than a week after the resolution was enacted, the NRA challenged it as government action attacking its First Amendment rights. In its filing, the NRA called the resolution a “blacklisting” measure, and urged San Francisco’s Federal court to “step in and instruct elected officials that freedom of speech means you cannot silence or punish those with whom you disagree.”
Late last week, rather than await “instruction” from a court, San Francisco Mayor London Breed backed down. In a formal memorandum to City officials, she declared that “no [municipal] department will take steps to restrict any contractor from doing business with the NRA or to restrict City contracting opportunities for any business that has any relationship with the NRA.”
San Francisco Mayor Breed is the “Mayor for All San Franciscans”, unless, of course, you are a Republican, or a firearms owner, or an NRA contractor, or a supporter of the Second Amendment.
“The [Mayor’s] memo serves as a clear concession and a well-deserved win for the First and Second Amendments of the United States Constitution,” says William A. Brewer III, counsel for the NRA. “It is unfortunate that in today’s polarized times, some elected officials would rather silence opposing arguments than engage in good-faith debate.” “The NRA will always fight to protect our members and the constitutional freedoms in which they believe”, added NRA CEO Wayne LaPierre.
The NRA’s challenge to a similar ordinance in Los Angeles remains pending. Last month, the city’s motion to dismiss was denied in its entirety by Dederal District Judge Stephen V. Wilson, who found that the NRA had stated a clear First Amendment claim.
About the NRA
Established in 1871, the National Rifle Association is America’s oldest civil rights and sportsmen’s group. With over five million members, NRA fights to uphold the Second Amendment and advocates enforcement of existing laws against criminals. The NRA remains the nation’s leader in firearm education and training for law-abiding gun owners, law enforcement, and the armed services.
Yesterday at the 2019 GAP Grind PRS match in Tennesee, Savage Arms unveiled three new Precision Series rifles — one centerfire rig, and two rimfire rifles. Aimed at PRS/NRL factory class shooters, these new rifles feature tweaked Savage actions in Modular Driven Technologies (MDT) chassis systems. The new Precision Series includes one centerfire rifle, the model 110 Elite Precision, and two rimfire rifles: the B Series bolt action, and the A22 Series semi-auto. All three new models utilize MDT chassis systems.
New Savage 110 Elite Precision
The new 110 Elite Precision is designed for PRS and NRL tactical-style competitions. Optimized for PRS/NRL Factory Class, this rifle boasts a blue-printed, black flash-nitrided 110 target action with gold-tone, titanium-nitrided bolt body. The fully-adjustable MDT ACC aluminum chassis features an ARCA Rail along its entire fore-arm, MDT Vertical Grip, and AICS mag compatibility. The Accu-Trigger adjusts from 1.5 to 4 pounds. Up front, Savage supplies a self-timing, taper-aligned muzzle brake. The 110 Elite Precision will be offered in eight (8) chamberings at two prices: .223 Rem., .308 Win., 6.5 and 6mm Creedmoor for $1,999; and .300 Win. Magnum, .300 Norma, .300 PRC, and .338 Lapua Magnum at $2,149.
Savage Elite 110 Precision Rifle Features:
Savage factory blue-printed 110 action
Stainless steel, flash-nitrided receiver
1.5-4 lb. user-adjustable AccuTrigger
Titanium Nitride bolt body
MDT ACC aluminum chassis, fully adjustable
Self-timing, taper-aligned muzzlebrake
MDT Vertical Grip and AICS magazine
ARCA Rail along entire fore-arm
Savage A22 Precision
The A22 Precision rimfire rifle employs Savage’s popular A22 delayed blow-back semi-auto action. Optimized for the NRL22 rimfire series and rimfire cross-training, this little self-loader features a custom MDT chassis similar to the B Series, adjustable length-of-pull from 13.5 to 14.5 inches, and an oversized charging handle. The A22 Precision weights 7.28 pounds. The company describes it as “the showcase to Savage’s love affair with the .22 LR.” The A22 is available in .22 LR for $599.
Savage B Series Precision
The new B Series bolt-action Precision rimfire rifle features an MDT aluminum chassis that adjusts for length-of-pull and comb height. The rifle ships with an 18-inch heavy barrel threaded at the muzzle, with a Picatinny rail on the action. This modestly-priced bolt-action rimfire also has a crisp Accutrigger. The B Series Precision comes in three rimfire chamberings, all for $599: .22 LR, .17 HMR and .22 WMR.
1000-Yard Nationals Course of Fire
Monitoring Barrel Wear with Borescope
Caldwell makes some excellent, adjustable field supports for hunters and varminters. Right now AccurateShooter readers can save 30% on Caldwell’s Fieldpod Magnum, Treepod, and Chairpod shooting rests. The Treepod is ideal for treestand hunters. The versatile Fieldpod Magnum is stable and sturdy yet can be easily carried into the field. The ChairPod provides comfortable seating with adjustable rifle rest. You can save big with this special 30% off discount for AccurateShooter.com readers and Forum members.
