At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Unless you’ve been under a rock you’ve heard that Dillon has released an all-new XL750 progressive reloading press. As a result, vendors are now discounting the venerable XL650 which is still a mighty capable platform. The best deal we found for an XL650 is at Creedmoor Sports. Right now you can snag a Dillon XL650 for just $499.95 — a crazy low price. When you purchase you’ll have a choice of calibers. NOTE: Case Feeder, Dies, and other accessories are NOT included for the $499.95 price. We suggest you CALL Creedmoor Sports to ensure you understand exactly what is included.
The Ruger Precision Rifle (RPR) is very popular with hunters, varminters, and tactical/practical competitors. For RPR fans we’ve found two GREAT deals. First CDNN Sports is selling the RPR in 6mm Creedmoor for just $899.99. And if you prefer the .308 Win, a great hunting round, the price is even more attractive. Right now Gander Outdoors is selling .308 Win Ruger Precision Rifles for $783.82, the lowest RPR price we’ve ever seen! NOTE: If you join Gander’s email list you may also get 10% off your first purchase.
3. Graf and Sons — AMP MARK II Induction Annealer, $1255.49
If you don’t have an AMP computer-controlled induction Annealing Machine yet, here’s your chance to save nearly $140.00. These amazing AMP Annealers are almost never discounted. But right now at Grafs.com you can save 10% on all AMP products including the superb AMP Mark II induction annealer. The 10% discount applies to all accessories as well as the annealing unit. Guys, this discount won’t last long — if you want an AMP Annealer, act soon.
4. Natchez — CCI .22 LR Rimfire Ammo 5000 Rounds, $239.99
This is one of the very best deals on quality, American-made .22 LR ammo we’ve found this year. You can snag 5,000 rounds of CCI 40gr .22LR ammo from Natchez for just $239.99. That’s $2.40 per box of 50 rounds — less than five cents per round! If you seek good rimfire plinking ammo at a rock-bottom price, take advantage of this offer.
5. Palmetto State Armory — Complete AR-15 Lower Receiver
PLUS S&W M&P Shield 9MM Pistol, BOTH for $399.99
If you need a carry pistol, and want to get started on a Modern Sporting Rifle project, here is a fantastic package deal. Palmetto State Armory now has a S&W M&P Shield 9MM PLUS a PSA complete AR-15 lower for just $399.99. YES that’s BOTH products for less than you might pay for the S&W pistol alone elsewhere. Just add an upper and you have a great carry gun plus a versatile Black Rifle.
6. Brownells — Federal 5.56×45 Rifle Ammo, On Sale + Rebate
If you’re looking for some 5.56×45 (.223 Rem) ammo, here’s a great deal on Federal American Eagle XM855 62gr green tip in various sizes. Choose XM855 Ammo in Mini Boxes or XM855 in Stripper Clips. NOTE, this American Eagle Ammo also qualifies Federal Factory REBATE. With this REBATE, you get get $15.00 ($0.05 per round) back for each 300 rounds of qualifying Federal American Eagle 5.56×45 Ammo. Maximum rebate is $500 per household.
Vortex makes a great product and offers one of the best warranties in the business. So when we saw the Vortex Strike Eagle 4-24x50mm scope for only $299.99 we had to feature it. It has a great 6 times zoom range and features Vortex’s popular EBR-4 MOA reticle. If you are looking for a SFP MOA-based scope for varminting or practical matches, this is a very good offering for the price — a real bargain.
Valuable riflescopes should be protected during transport and storage. These ProtX Neoprene Scope Covers are nicely padded, well-made, and affordable. These come in a variety of sizes from 9″ to 15″ overall, so you can find one to fit nearly any riflescope. It’s smart to use scope covers to protect your substantial optics investment. Neoprene covers provide much better shock and scratch protection than caps alone. For hunters looking to save ounces, there’s also a Gazelle $8.99 scope cover for optics up to 10″ OAL.
9. Amazon — MTM 50-Round Green Ammo Box, $10.99
MTM’s jumbo 100-round ammo boxes once ruled the line but more shooters are now using the smaller MTM 50-round boxes. These feature a metal hinge which won’t wear out like the larger boxes. With that improved hinge, the lid doesn’t spring back as with the 100-ct boxes. The smaller boxes are also easier to pack and easier to carry. Amazon currently has green MTM 50rd ammo boxes on sale for $10.99. You may want to grab some at this price.
Do you use bushings to size your case-necks? Are you assuming that your bushings are actually round on the inside, with a hole that’s centered-up properly? Well you may be in for an unpleasant surprise, based on what our friend Jim de Kort recently discovered. Jim was concerned about the run-out on his brass. His cases went into his bushing-equipped FL die pretty straight, but came out of the die with up to .004″ run-out. “What gives?”, Jim wondered. “Could the problem be the bushings themselves?”
To answer that question, Jim decided to examine his bushings. Using an Accuracy One Wheel-drive concentricity gauge, Jim checked out some of his neck bushings. What he discovered may surprise you…
Neck Bushing Flaws Revealed
Trust no one… — Jim de Kort
Jim writes: “I measured the concentricity of my 6BR rounds today. I noticed they went into the neck-bushing equipped full-length sizing die with less than .001″ deviation but came out with .003-.004″. The culprit, it appears, was the bushing itself. Without it the cases stayed within .0005″ to .001″ deviation, so something was happening with the bushing.
One bushing had .00025″ deviation on the outside, yet almost .003″ on the inside, so it is crooked. But even when using a bushing that is within .001″ I still get .003″ runout after sizing. I repeated the same procedure for my 6×47 and got the same results. When using the bushing, concentricity suffers a lot.”
Before we bash the bushing-makers, we must acknowledge that many different things can contribute to excessive run-out and/or mis-alignment of case-necks. We don’t have all the answers here, and Jim would be the first to say that some mysteries remain. Still, these are interesting results that give all precision hand-loaders something to think about.
Jim Borden of Borden Accuracy also offers this tip: “Check the trueness of the face of the die cap. That has more to do with trueness than the bushing. Also check perpendicularity of hole in bushing to top surface. When I was making dies, the cap was made by threading and facing the threaded tenon in same setup.”
Editor’s Comment: Many people have great results with neck-bushing dies, but Jim isn’t the only fellow who has seen some very odd results. I personally employ honed, non-bushing dies for many of my chamberings. These non-bushing dies (with the necks honed for .002-.003″ neck tension) produce extremely straight ammo, with run-out consistently under .0015″.
Gunsite Academy, the oldest and largest civilian firearms training academy in the world, has teamed with Panteao Productions to offer 52 firearms instructional videos. These Gunsite Academy NOW! videos cover the full spectrum of the Gunsite Academy curriculum. Instruction is provided by respected Gunsite instructors with commentary by gun writer Richard Mann.
Click above to watch the Gunsite Academy NOW! Season One trailer.
The web-hosted videos can be viewed on GunSite.com, on GunDigest.com, and on Panteo.com. Additionally, all 52 videos are available through Panteao Productions’ handy Mobile Apps for Apple and Android devices. Or, if you prefer the big screen, you can watch the GunSite videos on television via the Panteao Make Ready channel on Roku, Amazon Fire, and Apple TV.
A 43-Year Heritage of Excellence
Gunsite alumni Richard Mann, host of Gunsite Academy NOW! reports: “It was an absolute honor to host Season One of Gunsite Academy NOW … These videos highlight the best firearms instruction you can get.”
Founded in 1976 by Lt. Col. Jeff Cooper (WW II and Korean War combat veteran, author, and professor), Gunsite has been providing elite firearm instruction for more than 40 years. It enjoys a reputation for serious, no-nonsense training. Cooper built the facility just west of Paulden, Arizona. Originally it was called the American Pistol Institute (API).
Here is Tye Sim’s .270 Win Mountain Rifle: “This is off a trued and blue-printed Rem 700 action. I love it.”
For today’s Sunday GunDay feature, we thought we’d present a selection of rifles featuring both cool gear and scenic venues. We’ve got quite a mix — hunting rifles and competition rigs, full customs as well as factory rifles. And there are some interesting calibers including 6.5 Creedmoor, .270 Win, .308 Win, plus a couple WSM variants. Enjoy our Sunday lineup!
To begin, here is the beautiful Blair Atholl range in Scotland. Owner Gary Costello posted: “Great day today, weather was interesting but not as bad as we thought!” Gary, a top F-Class shooter in the UK who often runs a .300 WSM, has been featured in a previous Sunday GunDay spotlight story HERE
Andrew Stone is an F-Class shooter from the Southern USA. Here his F-Open rig is set up for load testing from the bench at his beautiful, tree-lined home range. Targets are at 600 yards. Andrew is using a SEB front coaxial rest and LabRadar chronograph mounted on an aftermarket tripod.
In the photo above is Brian Harder’s handsome .308 Win F-TR rifle. This features a Kelbly action, McMillan stock, and Vortex scope with level. Up front is a SEB Joystick Bipod (Joy-Pod) with accessory ski-type feet. Note that Brian runs a front scope extension tube (sunshade), and a mirage shield on the barrel. These items do make a difference, particularly on hot summer days!
Here’s another British Beauty. This is the 7mm-270 WSM F-Classer belonging to Forum member Ian B. (aka “Elwood”). It features a Stolle Panda F-Class action, 32″ straight-contour Bartlein barrel, and a custom Joe West stock, modified by Ian and then hydro-dipped in brilliant blue by Hydro Graphics in the UK.
Factory rifles can be interesting too. That’s pretty impressive accuracy shown by Steven Castleman’s Bergara B14 HMR chambered in 6.5 Creedmoor. On this day Steve was shooting Hornady factory ammo loaded with 147-grain ELD Match bullets.
Here’s a stunning silhouette of a Savage 6.5 Creedmoor. Ed Whipple posted: “Borrowing a Savage 10 BA Stealth from my buddy Ron. He wanted a 100-yard head shot on a hog. I’m not listening to Ron any more. Federal Fusion bullet ain’t messing around.”
Our take on Bore-Store Gun sleeves is simple: They work great, so buy them and use them — for ALL your valuable firearms.
These thick, synthetic-fleece sacks cushion your guns, preventing nicks and scratches. The breathable fabric wicks away moisture, and the fibers are coating with corrosion inhibitors. I personally use Bore-Stores for in-safe storage with all my guns, and I have never had one of my guns rust inside a Bore-Store, even when I lived a stone’s throw from the ocean.
Bore-Stores are offered in a wide range of sizes, so you can find something to fit everything from a Snub-nosed revolver to a 32″-barrelled 50 BMG. Rifle-size Bore Stores can be purchased for $12.00 – $21.00 from Brownells. For long F-Class or tactical rifles, we recommend the 10″x52″ Scoped Shotgun Bag, Brownells item 132-000-003. You can also order direct from the Bore-Store manufacturer, Big Spring Enterprises, www.BoreStores.com. Big Spring will also craft custom sizes on request.
Get Your Guns Out of Foam-lined Cases — They Are Rust Magnets
Just about the worst thing you can do for long-term storage (short of leaving your rifle outside in the rain) is to store firearms in tight, foam-padded cases. The foam in these cases actually collects and retains moisture from the air, acting as the perfect breeding ground for rust. Even in warm summer months, humid air can leave moisture in the foam.
Remember, those plastic-shelled cases with foam interiors are for transport, not for long-term storage. Don’t repeat the mistake of a wealthy gun collector I know. He stored four valuable Colt Single Action Army (SAA) revolvers in individual foam-padded cases, and locked these away in his gun safe. A year later, every one of his precious SAAs had rusted, some badly.
Consider Military-Style, Triple-Layer Bags for Long-Term Storage
While we prefer Bore-Stores for regularly-used guns, if you have heirloom firearms that will be kept in storage for very long periods without seeing any use, you may want to grease them up and place them in the thin, but rugged three-layer storage bags sold by Brownells. The bags are made from a three-layer laminate of polyester, aluminum, and polyethylene film, with a shiny silver exterior. Though the laminate is thin, the Brownells storage bags are puncture-resistant, and have a 0% moisture transmission rating so moisture can’t get inside. These bags are also resistant to petroleum-based chemicals and they won’t break down even in contact with soil or moisture.
Here’s one VITAL bit of advice for using these bags. Be absolutely sure, before you seal up the bags, that your guns are DRY and that all metal surfaces have been coated with an effective anti-corrosive, such as BoeShield T9 or Eezox. Brownells’ storage bags are inexpensive. A three-pak of 12″x 60″ rifle sacks (item 083-055-003WB) costs just $22.99 — under eight bucks a gun. That’s cheap insurance for rifles and shotguns that may cost thousands of dollars.
The Vanquish Pro ($109.99 on Amazon) has BlueTooth. The basic model does NOT have Bluetooth.
Many readers use electronic muffs during matches so they can hear range commands. The Howard Light Impact Sport muffs are popular and affordable at around $53.00 on Amazon. Now there is a new alternative from Bushnell/Champion — the Vanquish Series electronic muffs. These feature ultra-fast under 1 millisecond sound compression with HD speakers. The Vanquish Pro and Pro Elite models offer Bluetooth connectivity, so users can take phone calls or listen to music at the range. The Elite models also offer Active Noise Cancellation (ANC). On all Vanquish models, the earpads are a nice soft foam for comfort, and the shell design is angled at the rear to provide more clearance on gunstocks. That’s smart.
Vanquish Muffs Offer Ultra-Fast Reaction Time with less than 1 millisecond Sound Compression:
So far, Vanquish muff users have been impressed. Audio quality is good. The 3X sound amplification on the basic model ($54.00 on Amazon) provides ample volume for conversations (Pro Model goes up to 5X). The ear foam is soft for all-day comfort. Top PRS competitor Bryan Sikes states: “Been a big fan of these new muffs for a while. been using the Vanquish Pros and it’s nice to listen to some Taylor Swift via Bluetooth or take a call if I need to when denting primers. Comfortable and less than half the cost of Sordins.”
Consider Running Plugs Under Muffs
The basic Vanquish Muffs have a 22 NRR (Noise Reduction Rating), same as the Howard Leight Impact Pros. That’s not enough, in our opinion, for sustained multi-hour exposure to firearm noises, particular indoors, or outdoors on a busy firing line. The Vanquish Pro ($109.99 on Amazon) has a better 24 NRR, but we would still recommend using ear-plugs under the muffs, for superior noise reduction. We like the Howard Leight MAX-1 plugs, which offer 33db NRR by themselves.
In the late fall of this year (2019), Lapua will open a second USA Lapua Rimfire Test Center at the Cardinal Shooting Center in Marengo, Ohio. The new Test Center will offer rimfire shooters the opportunity to match individual lots of Lapua ammo to their match rifles and pistols. All of the capabilities of the new test center will replicate Lapua’s current USA Rimfire Test Center in Mesa, Arizona.
Patterned after the world-renowned Lapua Test Center in Germany, the new Ohio center affords shooters the opportunity to test different types and lots of Lapua ammunition, in their own firearms, under tightly controlled conditions. At the heart of each operation is the 100 meter test range. Fully instrumented, with state of the art Meyton/Bollman electronic targeting systems, the centers can record ammo accuracy at both 50 and 100 meters with a single string. Customers have the option to send their rifles in for testing or schedule an onsite appointment. Customers interested in testing at either USA Lapua Rimfire Test locations (Arizona or Ohio), should call (480) 898-2731 or email rimfiretest@capstonepg.com .
Lapua Hires Ace Smallbore Shooter to Manage New Testing Facility
Lapua has appointed Luke Johnson as manager of the new Rimfire Test Center. Johnson, a native of Marysville, PA, is a long-time competitive shooter and hunter. Luke recently became the NRA Smallbore Silhouette Standard Rifle National Champion and he was a USA Junior National Champion in 50m rifle. At the University of Alaska-Fairbanks, Luke was a 4-year letterman for the University’s D1 Rifle Team.
Luke says, “I’m excited to join the crew at the new Lapua testing center in Ohio. I have trusted Lapua for many years in my own competitive experiences and look forward to helping others improve their performance and confidence. The new test center will open up more opportunities for competitors to use Lapua ammunition.”
“We’re very fortunate to have Luke join the Capstone family in this very important role. We’ve watched Luke for many years in his competitive shooting, and while that was a key in his selection to this position, his people skills are even greater. His outgoing personality and eagerness to help others excel are exactly the qualities we sought in filling this new position,” stated Adam Braverman, Capstone Precision Group Director of Sales & Marketing.
About Capstone Precision Group
Capstone Precision Group produces Berger Bullets and Ammunition, and is the exclusive distributor of Lapua components and ammunition, Vihtavuori Powders, and SK Rimfire ammunition. Capstone Precision Group is a Part of Nammo Group. For more information, visit Capstonepg.com.
Is a ZERO extreme spread possible? Yes. Lou Murdica proved that, with AMP-annealed cases, and advanced reloading methods, you can achieve the exact same muzzle velocity — 2924 FPS for two shots in a row. Oh, and the accuracy wasn’t too bad either. Shooting in a tunnel with an F-Open rig on the bench, Lou put two rounds within 0.1 inch. Note, the rounds were fired with the wood-stocked F-Open/Benchrest rifle on the left, not the Rail Gun on the right. The full annealing and reloading process is shown in the video below:
See Complete Testing and Reloading Process in 3-minute Video!
We highly recommend you watch this video ALL the way through, and then watch it again. You will see one of the best shooters in the world loading precision ammo. Lou is a world-class short-range benchrest, long-range benchrest, and F-Class shooter. In this video you can see Lou load a cartridge start to finish, beginning with annealing using a computer-controlled AMP induction annealing machine.
After firing, the 6.5 Creedmoor case was annealed with the AMP induction annealer.
Here is Lou Murdica’s Reloading Procedure Used in this Test:
1. Anneal 6.5 Creedmoor cartridge in AMP Mk II Annealer.
2. Lubricate case with Imperial Case Wax.
3. Full-length size case with Redding FL bushing die in single-stage RCBS Big Max Press.
4. Apply Moly dry lube to inside of case-neck with brush.
After FL Sizing, and before bullet seating, Murdica applies dry Moly lube inside the case-neck.
5. Seat Primer with Bald Eagle Precision Primer Press.
6. Throw charge to within 1 kernel with Auto-Trickler System and Force Restoration Lab Scale.
7. Drop charge in case with precision funnel.
8. Seat bullet with hand die and Sinclair Arbor Press.
Two Rounds, Same Case, Both with Exact Same Velocity — 2924 FPS
If you watch the video, you can see that, for the second 6.5 Creedmoor round, the velocity is 2924 FPS. That is exactly the same velocity as shot number 1. So the two-shot Extreme Spread (ES) is Zero. The second shot was 0.1″ from shot number one — pretty close to one hole. Lou was using Vihtavuori powder and Berger AR bullets. On the screen, Oehler Ballistic Instrumentation software displays bullet velocities and impact locations using inputs from chronograph and acoustic target sensors.
Credit Boyd Allen for identifying Oehler System and RCBS Big Max Press.
Did you know that there’s a free online resource that provides key data for thousands of bullet designs? The ShootForum Bullet Database provides profiles with weight, length, SD, and Ballistic Coefficient for nearly 3900 bullet types from all the major manufacturers. You can access all this info for free. This is a great place to start when you’re considering bullet options for a new rifle, or a new chambering for an existing rifle. To be fair, not all the latest, greatest match bullets are listed here. Could the database benefit from updates — yes, but it is still a great info source. You should definitely bookmark this resource for easy access in the future.
The massive ShootForum.com Bullet Database includes over 3900 bullet designs in all. We counted nearly 200 different 6mm bullets! The bullet info comes from the makers of QuickLOAD Software. Access to the online database is FREE. Most database entries include Caliber, Manufacturer, Stated Bullet Weight, True Bullet Weight, Length, Sectional Density (SD), and Ballistic Coefficient. In many cases multiple BCs are provided for different velocity ranges. Having bullet length lets you know right away if your cartridge/bullet combo can fit your magazine.
The database is great if you’re looking for an unusual caliber, or you want a non-standard bullet diameter to fit a barrel that is tighter or looser than spec. You’ll find the popular jacketed bullets from major makers, plus solids, plated bullets, and even cast bullets. For those who don’t already own QuickLOAD software, this is a great resource, providing access to a wealth of bullet information.
Impressive engraving by Jesse Kaufmann. Note how the scope rings have been engraved to perfectly match the engraving pattern on the Remington 547 action.
Who says fine craftsmanship is dead? There’s a fellow up in South Dakota, Jesse Kaufmann, who produces some of the most handsome engraving we’ve seen. Jesse, who operates Black Hills Gunstocks and Engraving LLC, is a true master at metal engraving and he also does superb stock checkering. Here are some examples of Jesse’s engraving work:
About Jesse Kaufmann, Master Engraver
Jesse Kaufmann was a professional stockmaker for Dakota Arms for over a decade. In 2009, he was inducted in the American Custom Gunmakers Guild as a checkering specialist. In January 2017, Jesse was awarded his Master Engraver certification by the Firearms Engravers Guild of America. With his broad skill set, Jesse is able to offer his clients a unique and complete package of stock work, finish, checkering, and engraving for a custom package that is all completed under one roof by his own hands.
Jesse Kaufmann’s work has been featured in American Rifleman, American Hunter, FEGA’s The Engraver, Sports Afield, Waidmannsheil Journal of German Gun Collectors Assn., Gun Digest 71st Edition, Modern Custom Guns Volume 2, Dangerous Game Rifles 2d. Edition. For more info, visit BlackHillsgunstocksandengraving.com, email blackhillsgunstocks [at] gmail.com, or call Jesse at (605) 499-9090.
A 43-Year Heritage of Excellence
Remember, those plastic-shelled cases with foam interiors are for transport, not for long-term storage. Don’t repeat the mistake of a wealthy gun collector I know. He stored four valuable Colt Single Action Army (SAA) revolvers in individual foam-padded cases, and locked these away in his gun safe. A year later, every one of his precious SAAs had rusted, some badly.
Here’s one VITAL bit of advice for using these bags. Be absolutely sure, before you seal up the bags, that your guns are DRY and that all metal surfaces have been coated with an effective anti-corrosive, such as BoeShield T9 or Eezox. Brownells’ storage bags are inexpensive. A 
About Jesse Kaufmann, Master Engraver
