The Visalia Sportsman’s Association Dale Wimp Shooting Range — a great place to shoot.
Report by Boyd Allen | Photos and video by Pete Kitrinos
The IBS is in the West! The first International Benchrest Shooters (IBS) match at the Visalia, CA range was held over the recent Labor Day Weekend. Despite scorching 106° heat, many of the West’s top short-range benchrest shooters assembled for the first IBS-sanctioned match (after a 30-year history with the NBRSA) at the Visalia range. The mix of shooters included at least one Benchrest Hall of Fame member, as well as NBRSA record holders. Competitors were happy to return to Visalia, which had been closed for seven months while range improvements were made (some parts of the East berm were still under construction). With only two ranges in the entire state holding short range group matches, the temporary loss of Visalia had a significant impact. It was time to get back to business — the business of shooting tiny groups.
This video includes Aerial Drone footage of the range — worth watching!
Surrounded by fields, the Visalia Range is located in California’s Central Valley, a rich agricultural area.
For about thirty years the California 3-Gun Benchrest Championship match has been held at the Visalia Sportsman’s Association Dale Wimp Range over Labor Day weekend. For all those years, the matches have been put on by local shooter and current club president Dennis Thornbury. During a good part of that time, he has also managed to keep his name in the NBRSA record book, and pick up four Benchrest Hall of Fame points, as well as having recently done a tour as NBRSA president. This year’s match is sanctioned by the IBS, a first at Visalia.
Don “The Pumpkin” Nielson used an action he fabricated, a “fat bolt” aluminum 3-lug with steel insert.
Dennis Thornbury has been putting on registered matches at the Visalia range for 30 years. He holds an NBRSA record, and has 4 Hall of Fame points.
The format: On Saturday competitors shot 100 yards all day, Sporter in the morning, Light Varmint in the afternoon. The following day the morning competition was Heavy Varmint at 100 and at lunch the targets were moved to 200 yards with Heavy Varmint being shot that afternoon. On Monday, Labor Day, at 200 yards, Light Varmint was shot in the morning and Sporter in the afternoon. All three days consisted of five, 5-shot matches in the morning and five more in the afternoon.
Morning, Day 1 — Very few “daisy wheels”. This has been the trend for many years at this range.
Getting down to business. Shown, from right to left: Henry Pinkney, Joe Stanovich, Steve Epstein, Keith Cottrell (face obscured), Jim Nicolas (standing).
Sunday Top Shots: Jack Childers, Keith Cottrell, John Pierce, Lester Bruno, Dennis Thornbury, and Don Nielson. (Yes that’s a corn field in the background):
With the big temp changes between morning and afternoon, competitors were chasing powder loads all weekend. Small groups were hard to find, so only three “screamers” were recorded all weekend, and no teen Aggs. With the oppressive heat, attrition was also a factor: “We started with 30 shooters, and ended with just 21 competitors”.
Temperatures were in the triple digits for Saturday and Sunday, backing off to the high 90s on Monday. High humidity made it feel even hotter — heat stress was a definite issue. Even the rifles seemed to be at less than their best, causing very light wind conditions to produce Aggregates that were larger than the observed wind conditions would lead one to expect. Wind was generally light and switchy. Lighter mornings with wind increasing slightly through the days. Sunday saw more wind than the other two days after ten o’clock or so.
Loading benches with the usual clutter. Note the LabRadar chronograph on a bench at the firing line. Lawrence Weisdorn tracked his velocities during the match to know when a powder charge adjustment was needed.
Top Shooters: The Top Five in the 3-Gun (HV, LV, and Sporter) Championship were: Keith Cottrell (.2534), John Pierce (.2695), Dennis Thornbury (.2714), Art Kawai (.2885), and Rich Shaw (.3016). Winners of the Class Grand Aggs were Dennis Thornbury (HV .2424), Lester Bruno (LV .2400), and Keith Cottrell (Sporter .2395). CLICK HERE for full Match Results.
Equipment List for Top Five Shooters
You can use a LabRadar during competition. This was Lawrence Weisdorn’s set-up at Visalia.
Benchrest Technique — How to Shoot at Visalia
This range is built a bit like a large bathtub, dug into a flat field with the excavated earth thrown up in steep berms on three sides. This configuration and the usual lack of strong winds creates a lot of thermal-generated switchiness with flags changing direction often and very little agreement within any shooter’s set. This places a high premium on visual memory and the ability to judge equivalent conditions, because duplicates are almost never seen. Although the opportunity to run groups can happen, this is mostly a “pickers” range, which places a high premium on visual memory.
Facilities at Visalia Sportsman’s Association Range
There are 28 monolithic, steel-reinforced, concrete benches (poured in place, base and top all one pour). The reloading area is behind the benches with most of it on the same level as the benches. There are permanent (fixed position) tables that have laminate tops, except for where the range house sits, mid-range, with a “wailing wall” along its east and north sides. The direction of fire is north. The benches are under a slightly pitched metal roof that has recently been extended so that it has a good amount of overhang in front of the benches. Electricity is available in the reloading area and there are a few electrical outlets in the parking lot for RVs. There are both steps and a wheelchair ramp connecting parking lot to the reloading level and the shooting level.
Field of (Benchrest) Dreams — Precision Shooting Among the California Corn Fields.
Fit, capable, self-assured young women hunting in the Texas backcountry. What’s not to like? This is what’s offered by Extreme Huntress, a TV series that pits six lady competitors in a season-long shooting and hunting competition. It’s like a ladies-only version of Top Shot, but with a focus on hunting skills. Twenty-Six six-minute episodes are now available online at GetZone.com. Each episode features a game hunt, skills event, or competitor profile.
Twenty-Six short episode are available online right now on GetZone.com:
The 9th season of Extreme Huntress (2018) premiered on GetZone.com on September 15, 2017. A ton of 2018 content is online now — 26 six-minute episodes. This interactive, online competition series showcases female shooters and huntresses who compete head-to-head in hunting and skills challenges. According to its producers: “Extreme Huntress™ is about preserving our outdoor heritage and creating positive role models for women in the shooting and hunting sports.”
Held at YO Ranch Headquarters in Texas, the Extreme Huntress Competition takes nine months for the contestants to complete. Viewers can vote for their favorite competitor at www.ExtremeHuntress.com. The winner of the 2017 Extreme Huntress Competition is announced at the Dallas Safari Club.
Check out that bolt assembly. It features a fluted stainless bolt body, laser-engraved Titanium shroud, and Titanium dragon-scale bolt knob with polished stainless handle.
You haven’t seen a Ruger Precision Rifle (RPR) like this before. Forum member TerryH has customized his Second-Gen 6.5 Creedmoor RPR with a wicked purple finish, snazzy stainless/titanium bolt, and slick HDPE (polymer) bag-riders front and rear. The mods on this Hot Rod Ruger don’t stop there. Terry added a Seekins hand rail, Timney trigger, ergonomic grip, and more…
For his Hot Rod Ruger, Terry has the right skill set, learned on the job: “I work in a body shop and have pretty much custom-painted all my stuff for many years. For this 6.5 CM RPR, colors of choice are House of Kolor PBC-65 Passion Purple and black covered with Cerakote MC-161 matte clear.” Terry even painted his Bald Eagle rest purple to match his Hot Rod RPR.
Terry reports: “I’m shooting an RPR in 6.5 CM. It has a Patriot Valley Arms 26″ barrel. Josh at PVA is making a thread protector for me so I can remove the Mad Scientist brake. The butt stock has a V-Tab adjustable butt plate and Wiebad check rest pad. Glass is a currently a Vortex Gen I PST 6-24x50mm but I have a Golden Eagle on layaway”. To learn more about this rifle or ask TerryH questions about the build, visit this Shooters’ FORUM THREAD.
Ruger Precision Rifle Modifications: Chassis and Hanguards Painted Passion Purple
Patriot Valley Arms 26″ Barrel with Brake
Timney Trigger with Ambi Safety
Custom HDPE (Polymer) Bag-Riders front and Rear
V-Tab adjustable butt plate and Wiebad cheek-pad
Seekins Rail
Good Accuracy with Factory Ammunition
Terry reports: “The RPR is shooting .3 MOA @ 100 with factory Fed American Eagle 140s.” Terry plans to start handloading for the rifle with the goal of shooting F-Class matches next year: “I’ve successfully shot steel out to 1140 yards on the range but [I don’t know] if that will actually translate well in a match. I’m committed to practicing as much as I can and starting to shoot some matches in 2018.”
Front and Rear Bag-Riders with Protektor Rear Bag and Upgraded Bald Eagle Rest
Terry has engineered a slick set-up for F-Open competition and load testing. Up front is a Bald Eagle rest upgraded with windage knob mod, stainless F-Class feet, and longer adjusters. Terry also “changed the hardware to all stainless and added a couple of levels”. In the rear, Terry runs a Protektor Doctor rear bag with 1″ ear spacing.
The really impressive additions are custom HDPE bag-riders Terry crafted himself: “I realized that the butt stock wasn’t going to cut it on the rear bag and even though I got the 2 1/4″ front bag and the Seekins rail is 2″ wide and flat that it wasn’t as stable or smooth as I’d like.” So Terry made his own front and rear bag-riders from HDPE, a material similar to Delrin. Currently the front unit is 2.25″ wide, but Terry will be changing that to a 3″-wide front sled: “I decided that I’d get a 3″-wide front bag and mill a new front bag-rider. I’m going to recess the center to fit around the hand guard and I’ll mill a recess on the bottom of that one.”
Shown below is the Hot Rod Ruger before Terry added the HPDE Bag-Riders front and rear. Terry says the rifle now handles much better with the bag riders, and he plans to upsize the front sled to 3″ width.
Bling’s the Thing. Below is the Hot Rod Ruger’s bolt assembly. It features a custom flat-fluted bolt shaft, laser-engraved Titanium shroud and Titanium dragon-scale knob with polished stainless handle. Terry confesses: “I simply can’t resist anything shiny!”
Proper eye protection is ‘must-have’ gear for shooting sports. In addition to providing reliable impact protection, good shooting glasses should be comfortable, fog-free, and not interfere with your preferred hearing protection. Those who require corrective lenses also need to consider the various options available. In a past episode of their Weekly Gear Review, the 6.5 Guys discuss a variety of shooting glasses they have tried, including examples from DeCot, Oakley, and Wiley-X. Ed and Steve outline the key considerations when choosing eye protection, and then review practical aspects of eyewear design and construction that enhance comfort and functionality in the field.
The 6.5 Guys (Ed and Steve) offer a number of smart tips consider safety eyewear, helping you select the most effective safety glasses at an affordable price. Here are the 6.5 Guys’ KEY Take-aways when choosing shooting glasses, including prescription eyewear:
Key Things To Consider When Choosing Eye Protection
1. Avoid polarized lenses or lenses that reduce light transmission significantly (except for action shooting in very bright conditions with large, close targets).
2. Avoid frame designs that interfere with prone shooting.
3. Avoid designs that easily fog.
4. Avoid frame designs with thicker temples that are uncomfortable to wear underneath hearing protection.
5. Select lenses with an appropriate degree of ballistic protection. CLICK HERE to learn more about eyewear safety standards.
6. When you get your prescription, be sure your ophthalmologist includes the interpupillary distance. This is a critical measurement particularly for heavier prescriptions.
7. If you have a complicated prescription select a vendor who will actually spend time with you to address any concerns.
Safety First — Your Eyes Are Irreplaceable Accurate shooting begins and ends with the human eye. Your career as a marksman could be cut short if you don’t use good eye protection every time you go to the range and/or handle a firearm.
Every year, 1,000,000 people suffer serious eye injuries. Shooting is hazardous; it is estimated that there are 30,000 firearms-related eye injuries each year (if you include paintball sports.) After paintball, general hunting accidents comprise most firearms-related eye injuries.
Quality eye protection need not be expensive. You can find comfortable, ANSI Z87.1-certified shooting glasses for under $10.00.
If you select shooting glasses carefully, and ensure that your eyewear is safety-certified, inexpensive shooting glasses can perform very well. But you need to avoid cheap, soft-plastic lenses that claim “impact resistance” without satisfying a testing standard.
There a number of good rebate programs going on right now, but many of them conclude at the end of October. To take advantage of these deals you’ll need to start your shopping. Here’s are some current Rebate Programs for ammunition, loading equipment, and shooting accessories.
Bet you’ve never seen anything like this before — a “double-decker” indoor shooting range. Lotus Gunworks of Jensen Beach, Florida, operates a super-sized twin-lvel indoor shooting range featuring a two-story-high steel funnel bullet trap. Nicknamed the Lotus 8/11 for the number of steel panels used to create it (eight panels on the bottom slope and 11 panels on the top slope), this version of Action Target’s Total Containment Trap is the first of its kind. “No one has ever seen a range like this before” noted Lotus Gunworks’ Robbie Abell.
Abell came up with the two-story concept when it became clear that the new Lotus building in Jensen Beach was not wide enough for two side-by-side ranges AND a gun store. Necessity was the mother of invention… Lotus wanted at least two ranges, so the only option was to make a double-decker range where both levels shot into the same bullet trap.
Indoor ranges require ventilation to remove potentially hazardous dust and lead particles. The sheer size of the double-decker range presented a unique challenge, but Carey’s Small Arms Range Ventilation installed a system that can completely replace all the range air every 80 seconds.
Other Multi-Level Shooting Ranges
While the Lotus Range may have the first two-story bullet trap, it’s not really the first-ever double-decker indoor shooting range. Other multi-level ranges exist, they just don’t have the giant bullet trap. In fact, some of the multi-level ranges in Europe are bigger and even more sophisticated.
Brünig Indoor facility — Multi-Level Range Underground
Switzerland boats a popular shooting facility built completely underground. The large, deluxe Brünig Indoor facility includes a 300m underground range with multi-level shooting stations.
This video shows centerfire rifle practice on the upper level of one of Brünig Indoor’s shooting tunnels:
Dutch Double-Decker Range
Here’s a Dutch Double-Decker Range. Check out Schietsportvereniging (SSV) Katwijk, a great twin-level range in Holland featuring electronic targets with displays at each shooting station (on both levels):
We’ve seen new shooting disciplines emerge in recent years (3-Gun, PRS, ELR to name a few) and now we’re seeing another trend — shooting matches that combine action shooting with precision Long Range competition. The latest and greatest example of that is the Nosler King of the Range event slated for late October in Oregon. 3-Gun, Long Range, and a combined match title will all be up for grabs in this two-day, combo event. Competitors can shoot either the 3-Gun or Long Range match, or shoot both, going after the title of “King of the Range”.
It is unusual for a 3-Gun action match to be combined with a long-range competition, because few venuea offer the right combination of terrain and facilities for both disciplines. Mason Payer, Nosler Marketing Manager says: “The size and varied terrain of the COSSA park facility [near Bend, OR] presents the opportunity to combine both 3-Gun and Long Range, making this a truly multi-discipline match that will be fun for and challenging for everyone.”
The Nosler King of the Range, presented by MGM Targets and COSSA, will be a combined-match format, spread over two days of competition. Day One will feature 5 or 6 stages of 3-Gun, while Day Two will be comprised of 5-6 stages of Long Range, for both Bolt Guns and Gas Guns.
Nosler King of the Range Course of Fire:
Day 1: Match consists of 5-6 stages of 3-Gun that run anywhere from 30 to 160 seconds.
Day 2: Long Range 5-Stage Match with Bolt Guns out to 1000 yards and Gas Guns out to 800 yards.
NOTE: Separate rifles can be used for the 3-Gun half and the Long Range half.
The Nosler Cup 3GN Long Range Match will be comprised of approximately 10 stages of challenging precision shooting. This will be a standard 3-Gun match running concurrent with the long range match. Ten stages with 6-8 rifle targets per stage, and 4-10 pistol targets on most stages.
The Nosler Cup 3-Gun Match, hosted by COSSA, will be a one-day competition, featuring 5-6 stages of running and gunning. Shooters will have the opportunity to shoot on Saturday OR Sunday (either day).
Nobody likes to spend hours manually chamfering cases and cleaning primer pockets. There are simple hand tools that will perform these tasks, but the process is time-consuming and tedious after a couple dozen cases. To speed up case prep duties, you can get one of the large, powered case prep centers. These function well, but frankly we didn’t want to give up that much precious space on our reloading bench. One good solution is Hornady’s compact Case Prep Trio (item 050160). This triple-threat tool packs a lot of functionality in a small package.
This cleverly-designed powered tool has a small footprint, yet it can perform three tasks as well as much more expensive, tower-style case prep units. The Hornady Case Prep Trio is now $85.99 at Midsouth Shooters Supply. We’ve used this machine and it works well. The only negative is that you will get metal shavings on your bench (unlike some of the larger case prep centers). We’ve seen some guys put a small pan under the power head — then you can just dump the shavings out of the pan.
With three active stations, you can chamfer, deburr and clean primer pockets without having to change tools. The Case Prep Trio ships with inside chamfer, outside chamfer, and deburr tools. You can also use the machine with other optional 8/32 threaded accessories such as primer pocket reamers and case neck brushes. Conveniently, the Case Prep Trio has on-board storage for your tool-heads. User reviews have been very positive.
The 14th annual CMP Western Games and Creedmoor Cup Matches will head back to the Ben Avery Shooting Facility in Phoenix, Arizona next month. The CMP Western Games run October 13-17, 2017, followed by the Creedmoor Cup Matches from October 18-22, 2017. Popular CMP Western Games events will include the Garand, Springfield, Vintage Military, Modern Military, Rimfire Sporter, Carbine and Vintage Sniper matches. The Creedmoor Cup features a 4-Man Team Match, EIC Match and 80-Shot High Power rifle event. The 10-day combined series of vintage and service rifle matches are open to competitors of all ages and experience levels.
High Power Shooting Clinic and SAFS
A CMP Advanced High Power Shooting Clinic will also be held with instructino from some of the nation’s leading High Power Shooter. In addition, a rifle Small Arms Firing School will give participants insight into the fundamentals of marksmanship and competition shooting. Participants are teamed up with experienced CMP Rifle Master Instructors for classroom and hands-on training, with rifles and ammunition provided. Students in the school will also fire in a true M16 EIC Match, observed by instructors on the line.
Try Out CMP’s Traveling Electronic Targets
Competitors at this year’s CMP matches at Ben Avery will also have the opportunity to fire on the CMP’s highpower electronic target system.
The traveling targets, which include precision scoring hardware and software, plus a high-tech wireless monitor system, were used earlier this year with great success at the Oklahoma Games in April and Eastern Games in May. In June, at the outset of the National Matches, the targets made history by recording 36,000 shots during an entire week of successful National Match Course events on the ranges of Camp Perry in Ohio.
The dots and dashes are Morse Code for the shooter’s initials. The wood is Mango with Walnut fore-end wing inlays. The barreled action is an older Anschutz Model 54 that spent years in a prone stock.
Build Report by Doan Trevor
How do you build a stock for the grand-daughter of an award-winning shooter? Over the years I have built five or six rifles for this shooter, and now his grand-daughter had taken an interest in F-Class. He wanted her new rifle to mirror his own F-Class rifle, and he provided me with an old Anschutz Model 54 barreled action. Her new rifle would get her started in rimfire with the possibility of graduating to High Power (centerfire) shooting. The dots and dashes on the sides of the stock are Morse Code for his grand-daughter’s initials — “AMS”.
Rimfire F-Class Stock Design Factors
Typically when I build a rimfire F-Class stock I use the same pattern as I do for High Power stocks. The pattern has evolved from my prone stocks, as it has proven very successful with time. Also, there is a known issue of using wood for a stock in F-Class. The wood needs to be cured, and unfortunately, finding wood in the specific dimension for the stock is near to impossible. Therefore, I inlay pieces in the fore-end making sure that it is straight and on center. Other materials can be used for an F-Class stock, but keeping them straight and centered can be very difficult. Using cured wood during the build process, I continually check the centerline from fore-end to the rear slider, ensuring that the stock stays centered. This helps ensure good tracking and return to point of aim.
Adapting Prone Stock for F-Class Use
There is a current trend of older Palma and prone shooters to convert their rifles for F-TR and F-Open due to eyesight problems and other disabilities. The stocks that they have been using (and loving) can be recycled to their new shooting styles with a few design changes. I have been doing this successfully for the last several years. Whether it be a new shooter or an older one, you can either plan for the future or adapt older equipment so that all can shoot the style that they want. My philosophy in rifle building is to create every rifle with the potential to win a national or world championship. I am proud to say that I have build rifles for Derek Rodgers, Trudie Faye, Lige Harris, Barry Smith, Eric Rhodes, Kent Reeves, Terry Glen and many more award-winning shooters. And I look forward to many more.
What the Heck is .22 LR Rimfire F-Class?
There is no official NRA F-Class rimfire discipline (at least not yet). However, many F-Class shooters (both F-0pen and F-TR) employ .22 LR rifles for low-cost training. For example, James Crofts practices extensively with his 40X rimfire F-TR rig. In addition, many shooting clubs offer F-Class style rimfire fun matches, shot prone with front rest or match bipod. This rifle was built for an F-Class fun match hosted regularly by the Los Angeles Rifle & Revolver Club (LAR&R).
The photo below displays a different Doan Trevor-crafted rifle, a rimfire benchrest rig with Turbo action. This shows how Doan makes the 3-inch-wide fore-end. Outboard left- and right-side wings are bonded to the central stock material, then the wings are carefully shaped for straightness. Getting the geometry “just right” helps the rig track perfectly.
Accurate shooting begins and ends with the human eye. Your career as a marksman could be cut short if you don’t use good eye protection every time you go to the range and/or handle a firearm.
