Smith & Wesson has introduced a new, affordable .22 LR (rimfire) target pistol, the SW22 Victory. The new SW22 Victory is a fixed barrel, enclosed hammer, blow-back semi-auto design. In profile it looks similar to a Ruger Mark III, but with a more vertical grip angle. Interestingly, the 5.5″-long “match-grade” bull barrel can be removed with a simple one-screw takedown system. S&W claims the new SW22 Victory is very accurate — we hope to test one soon and verify those claims.
See the Features of NEW SW22 Victory™ Pistol:
The SW22 Victory comes standard with a fiber optic front sight and an adjustable green fiber optic rear sight. Though not shown in the top photo, the SW22 ships with a Picatinny-style top rail for easy mounting of optics. (We commend S&W for providing a factory rail option). Fire controls on the pistol include alloy trigger with adjustable trigger stop, single-sided thumb safety, slide stop, and magazine release. The SW22 Victory’s unloaded weight is 37.4 ounces. OAL is 9.2 inches, and the pistol is fairly slim at 1.3 inches width. MSRP is $409.00 with two (2) 10-round mags.
“The SW22 Victory was designed to fill a need for a highly versatile, accurate and affordable .22 LR target pistol,” said Jan Mladek, General Manager of the Smith & Wesson brand. “Whether it is a new shooter learning the fundamentals of handgun marksmanship or the experienced target shooter who is trying to reach the next level of proficiency, the SW22 will deliver many personal victories along with years of shooting enjoyment.”
What kind of case lubricant do you use. If you’re like most hand-loaders, you prefer some kind of thin, spray-on lube. Our friend Gavin Gear of UltimateReloader.com surveyed his readers, with the results displayed in the chart below. Thin spray-type lubes took the top spot, followed by waxy-type lubes.* CLICK HERE to Vote in the Case Lube Poll.
Gavin explains: “Over the years, I’ve talked quite a bit about different case lube products and techniques for both rifle and pistol reloading. Depending on your goals, the cartridge being reloaded, and what you have on-hand, your options will typically be honed down to a few ‘best options’. But the more you talk with seasoned reloaders, the more options you’ll discover.”
Synthetic Motor Oil for Special Tasks
One new lubrication option Gavin has tried is synthetic motor oil “I’ve started using another product for rifle case lube: synthetic motor oil. In particular, I’ve been using this oil to ‘prime’ rifle sizing dies when starting a loading session. This priming combined with fresh spray lube (Dillon DCL recently) has been a good combination for .223/5.56 and .308/7.62x51mm loading sessions.
I just pour a bit of synthetic motor oil into the quart jug cap, dip my finger into the cap, and apply about one drop to the outside of the case with my fingers. I then dip the end of a Q-Tip into the oil cap (just a drop applied), and roll the end of the Q-Tip between my fingers. The Q-Tip is then ‘rolled’ inside the case mouth to provide lube for the expander ball. I’m wondering how many thousands of applications I could get out of one quart of motor oil!
*This Editor’s own perference follow this ranking. For regular case-sizing with benchrest cases (and close-fitting dies), I use Ballistol aerosol (active ingredient is mineral oil). Not chalky or gummy, Ballistol is very, very slippery. A thin sheen lubricates extremely well yet wipes off easily. For heavy case-forming duties I use Imperial Die Wax.
Clean and Lube
One advantage of Ballistol is that, wiped on a patch, it will remove carbon residue from case necks. That way you can clean and lube your case in one step before running your case into the Full-length sizing dies. Just spray a little on a cotton patch. After cleaning the case-neck flip the patch over and lube the case body.
The National Shooting Sports Foundation (NSSF) has responded to President Obama’s proposed Executive Actions concerning gun ownership and firearms transfers. The NSSF stated: “We all share the goal of reducing the intentional misuse of guns and enhancing the safety of our communities. As the trade association for the firearms and ammunition industry, the National Shooting Sports Foundation (NSSF) will carefully review all aspects of the executive actions that President Obama announced today. Much remains to be spelled out. In the interim we have some initial reactions:”
We support further resources being allocated to staffing and increasing operational hours for the FBI’s National Instant Criminal Background Check System (NICS) to make the system more efficient and responsive.
We represent Federal Firearms Licensees (FFLs). The criteria for what will constitute being “engaged in the business” going forward needs considerable clarification and raises questions about enforceability.
The number of firearms lost or stolen while in transit to or from FFLs is less than 0.15 percent of the number manufactured and imported in a given year. In these rare occurrences, FFLs already actively participate in ATF’s long-standing voluntary reporting program and FFLs and common carriers work closely with ATF to investigate them. Proposals to make a shipping FFL responsible for tracking and reporting firearms no longer in their inventories, after the legal title has been transferred to the purchaser, are misdirected, as the receiving FFL is in the best position to know if it receives its shipment.
We have long called for the effective enforcement of the numerous laws already on the books regarding the criminal misuse of firearms and would encourage the administration to carry through on this directive.
NSSF has been working actively since early 2013 through our FixNICS initiative to encourage states to report all appropriate adjudicated mental health records to NICS and has succeeded in getting legislation passed in more than a dozen states. We welcome the administration’s attention to this issue.
With regard to the development of “smart-gun” technology, the industry has never opposed its development. How additional government research into this technology would advance it is unclear. Law enforcement agencies and consumers themselves will have to make the determination whether acquisition of firearms with this technology “would be consistent with operational needs,” as the White House itself states. We would continue to oppose mandates for this technology, particularly since there are well proven existing methods to secure firearms, and firearms accidents are at historic low levels.
NSSF will have additional responses in the days, weeks and months ahead, especially as federal departments and agencies begin the work of carrying out the executive orders.
You can see scores of new-for-2016 products in the free January digital edition of Shooting Industry magazine. The new product offerings are found in a 28-page feature article starting on page 76 and ending on page 104. In those pages you’ll find new items from leading companies such as: Alliant, Browning, Hodgdon, Hornady, Lyman, Nikon, Ruger, Vortex, and Weaver Optics.
Important New Products
You can also see the new products in Shooting Industry magazine’s regular website, on the New Product Showcase Page. As a teaser, here are three new products from that page — new Alliant Reloder 16 powder, a new Bench-top primer tool from Lee, and a handy Lyman maintenance mat. We are VERY interested in new Reloder 16 propellant. Alliant says RL16 has a burn rate similar to H4350/IMR4350, which would make RL16 ideal for many popular match cartridges.
NEW Product — Alliant Reloder 16 Powder
Alliant Powder Reloder 16 is a propellant that performs consistently across temperature extremes. Its burn rate is slightly faster than Reloder 17’s — well within the 4350 burn speed band. This makes it ideal for traditional hunting cartridges as the .30-06 and .270 Win. It will work as well with 6.5mm target loads and tactical applications where temperature stability is required. The Alliant Powder Reloder 16 contains a de-coppering additive but no toxic DNT or DBP.
NEW Product — Lee Auto Bench Prime
The new Auto Bench Prime from Lee Precision is an easy-to-use bench-mounted priming tool with a large lever that provides good “feel” with plenty of mechanical advantage. The symmetrical design allows for right- or left-hand operation. The Auto Bench Prime includes priming assemblies for large and small primers and a folding tray with a built-in primer-flipping feature. This allows direct filling from large primer boxes. The unit uses special, but inexpensive priming tool shell holders.
NEW Product — Lyman Maintenance Mat
The new Essential Rifle Maintenance Mat from Lyman Products is a smart item that any gun-owner can use. This 10″ x 36″ cleaning/assembly mat features small compartments for tools, parts, and cleaning item. The mat’s firm yet cushioned synthetic rubber surface protects your firearms. The Mainteance Mat’s molded-in compartments keep small parts and screws handy, yet out of the way. The Lyman mat is chemically resistant and cleans up easily.
Here’s big news for target shooters (especially benchresters). There’s a new, premium fixed-power scope option with ED glass. Nightforce Optics just introduced its 42 x 44mm fixed-power competition scope. This 20.7 ounce lightweight is a “clean-slate” design, all new from the ground up. Clicks are 1/8 MOA (0.125″ at 100 yards), while the side-focus parallax control adjusts all the way down to 10 meters. Two glass-etched reticle designs are offered: CTR-2™ and CTR-3™.
Nightforce is proud of the engineering that went into this new optic: “By eliminating the inherent weight of a variable-power mechanism, we were able to build the Competition™ 42 x 44mm at just 20.7 ounces without sacrificing the stunning images produced by ED glass and the robust mechanics for which we are known.” MSRP for this new scope is $1795.00, but expect the “street price” to be lower.
Nightforce tells us that the 42X Competition was built strong to handle the recoil of the large cartridges used in F-Class and 1000-yard benchrest. In addition, new 42X Comp scope will focus sharply from infinity all the way down to 10 meters, making it an excellent choice for short-range rimfire and air gun competitions, as well as long-range target applications. Other scope features include: high-visibility engraving and fast-focus eyepiece. The scope ships with a screw-in sunshade, plus objective and eyepiece lens covers. Nightforce says: “ED glass provides exceptional resolving power and color contrast [and the] 44 mm objective lens gives excellent light transmission without adding unnecessary weight.” For more information call (208) 476-9814 or visit NightforceOptics.com.
Story tip from EdLongrange. We welcome submissions.
Our friend Vince Bottomley of TargetShooter.co.uk recently reviewed the new Phoenix “over-the-top” tactical bipod. The innovative Phoenix bipod fits to a Picatinny-type rail on the TOP of a handguard. A cross-over bridge carries the legs out wide to the sides. This suspends the rifle’s weight BELOW the bipod mount for a lower perceived center of gravity. The “suspension” design really works. With this low COG system, according to Vince, the suspended rifle sort of acts like a “pendulum”, making for a steadier hold. You can rotate (cant) the rifle slightly to match the horizon line without having the rifle flop from side to side as with conventional bottom-mounted or spigot-mounted bipods.
The Phoenix is very stable according to Vince. That comes from the wide wheelbase as well as the oversized, skid-type feet on the Phoenix. Take a look at this photo below. This shows an Atlas bipod mounted on the Lower Pic-rail, with the big Phoenix mounted forward, on the top Pic-rail. Notice the vast difference in span. The legs of the Phoenix extend out much further, for true “wide-track stability”.
Compare the Wide-Track Phoenix with the Atlas Bipod — Quite a Difference!:
Vince was impressed with the Phoenix Bipod in use: “It’s just so solid…The large feet swivel to conform with the ground you’re shooting off and the two-part sliding legs will add another three inches to the height and a further four inches to the span, making 16 inches in total. At the lowest height, with the bi-pod mounted on my AX chassis top Pic-rail, the barrel is a mere six inches off the ground – lower than my Atlas, though of course I can swivel the legs forward on the Atlas to make it a similar height. The sliding leg arrangement is nicely done, offering very positive push-button ‘lock-steps’ every half an inch or so.” The Phoenix Bipod costs £220 (about $293.00 USD) including the adapter. For more information, visit PhoenixTactical.co.uk.
Vince Compares Phoenix with with Four Other Bipod Types
Vince’s review is well worth reading because he compares the Phoenix with a variety of other tactical bipods including the Atlas bipod, LRA bipod, Mystic Precision bipod, and the SAKO TRG-rifle accessory bipod. Vince identifies the key features a field bipod should provide and then explains how the Phoenix stacks up compared to these other designs.
The creators of the Firearms Guide DVDs have launched a huge online database for firearms. This new, subscription-based web resource, Firearmsguide.com, includes over 61,000 firearm types from 902 manufacturers. It’s easy to find just about any gun — search by manufacturer or other variables such as caliber, action type, country of origin, and vintage. In addition, the gun entries are cross-linked to a large ammunition database so you can find factory ammo for any type of firearm.
You Can Search for 61,000+ Guns Using 14 Variables:
Think of this as a digital encyclopedia of guns — the mother of all gun reference guides. The sheer amount of information (text, photos, and schematics) is mind-boggling. Firearmsguide.com currently covers 61,000 models of rifles, pistols, shotguns, air rifles, and air pistols from 50 different countries. Subscription plans start at $49.95 per year.
This new database is a gold mine for gun collectors and gunsmiths. For most of the firearm entries, there are full specifications and up to 12 high-rez color photos. In addition, the database features 5500 printable schematics along with parts lists. Collectors will appreciate the inclusion of gun values for both modern and vintage firearms.
At the request of our readers, we have launched a “Deals of the Week” feature. Every Monday morning we offer our Bargain Selections. Here are some of the best deals on hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. 6mmAR.com — Easy-Change Front Bag-Rider for ARs
Here’s a great product from our friend Robert Whitley at 6mmAR.com. This new device is a 3″-wide, flat-bottomed, front bag-rider that mounts to your AR in seconds, without tools. The bag-rider (aka “sled”) really works — stabilizing your AR when shooting from a front pedestal rest. We recommend using the front sled during load development and whenever shooting from the bench. The bag-rider attaches to your AR’s handguard with a Velcro strap, indexing on the bipod stud. Right now the Easy-Change Bag-Rider has an introductory price of $55.00. If you own an AR, you should get one.
2. Target Sports — Federal .22 LR Ammo, 325 Rounds for $24.90
Need good quality rimfire ammo at a low price? This TargetSportsUSA.com deal — 325 rounds for $24.90 — is a very good value. We’re pleased to see rimfire ammo prices become affordable again. Purchases are limited to five (5) 325-round boxes per customer. This is better than most “bulk-box” rimfire ammo. Another good deal right now is the Federal AutoMatch Bulk Pack, 325 rounds for $20.99 at Natchez Shooters Supply (but you are limited to two boxes).
3. Precision Reloading — Forster 2-Die Sets with Ultra Seater
Precision Reloading has Forster two-die reloading sets on clearance now. For $75-$80 per set you can get a precision full-length sizing die plus an Ultra micrometer-top seater. These are good dies — your Editor uses these very same dies for my .223 Rem reloading. Die sets for numerous popular chamberings are on sale now including: 220 Swift, 222 Rem, 22 PPC, 6mmx45, 6mm PPC, 6mm Rem, 243 WSSM, 257 Roberts, 25 WSSM, 7mm BR Rem, 280 Rem, 7mm WSM, 7×57 Mauser, 7mm RUM, 303 British, 30-378 Wby and more.
4. Home Depot — 72″ Wood Workbench for $70.25
This patented Home Depot workbench assembles in a few minutes. Simply unfold the legs, pop in the shelf, and you are ready to start your project. Made from Premium 2×4 Hemlock fastened with glue and screws, this workbench is a great value. The bench (72″ wide x 35″ high x 22″ deep) can easily be stored when not in use. NOTE: The wood is unfinished (can be painted or stained).
5. CDNN Sports — 1911-Type .22 LR Target Pistol
Everyone should have an accurate .22 LR target pistol. This German-made GSG 1911 22LR pistol shares the look, feel, and ergonomics of J.M. Browning’s classic model 1911 so it’s good for cross-training. We’ve tried this pistol and the trigger is pretty darn good — though don’t expect it be be as nice as a S&W Model 41. But consider that the GSG costs just $249.99. By contrast, MSRP on a new Model 41 is a steep $1369.00. For cross-training and target work the GSG is a very good value.
6. Stocky’s Stocks — Composite Stock with Bedding Block
Here’s a killer deal on a versatile Stocky’s Long Range Stock with aluminum V-block bedding system. For just $199.99, order this for Rem/Rem Clone long actions or short actions, with either narrow or wide (varmint/tactical) barrel channel. This would be a good choice for a varmint rifle. This is also offered with a matte black, tan, or olive baked-on textured finish for $229.97.
7. Natchez — Nikon Hunting Scopes on Close-out
Natchez Shooters Supplies is running a big sale on Nikon optics with Camo finishes. Prices have been reduced as much as 43%. If you’re looking for an inexpensive, name-brand optic for your hunting or varmint rifle, check out these Nikon bargains. This scopes all carry full Nikon factory warranty.
8. Amazon – Frankford Arsenal Master Tumbler Kit
This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $64.40 with free shipping, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish.
Hey guys, you’ll probably want to download this new Powder Burn Rate Chart issued by Hodgdon/IMR. This new table shows the latest IMR powders including the Enduron series (IMR 4166, 4451, 4955, 7977), shown in green below. This chart provides useful information for all hand-loaders. When doing load development, and testing one powder versus another, it’s generally wise to choose propellants that share the same relative burn rate, as least for starters. NOTE: Hodgdon powders are shown in blue, while IMR standard powders are shown in yellow. DOWNLOAD Chart HERE.
If you have ever turned a large quantity of case-necks using power assist, you know that a carbide mandrel can make the job go easier, with better end results. In our experience, when using carbide mandrels (as opposed to ordinary steel), the cases move more smoothly with less heat build-up. Pat Reagin of PMA Tool explains why carbide neck-turning mandrels work better:
Carbide offers several advantages over conventional steel and stainless steel when making any tooling, specifically neck-turning mandrels:
Dimensional Stability — Carbide maintains its dimensions indefinitely during heating and cooling. This eliminates the need to allow the mandrel time to cool every few cases.
Coefficient of Friction and Wear-Resistance — Carbide exhibits a low coefficient of friction value as compared to all steels and wears up to 100 times longer. This reduces (but does not eliminate) the amount of lubricant required.
Galling Resistance — Carbide has exceptional resistance to galling and welding at the surface. This basically eliminates the chance of getting a case stuck on a mandrel due to insufficient lubrication.
Given the benefits of carbide neck-turner mandrels, you may be asking “where can I get one?” Sinclair Int’l offers carbide mandrels for Sinclair neck-turners for $49.99, in a full range of calibers: 17, 20, 22, 6mm, 25, 6.5mm, 270, 30, and 338.
$49.95 Carbide Mandrels from PMA Tool
PMA Tools now also offers carbide mandrels in a full variety of sizes. At $49.95 each, PMA’s carbide mandrels are priced competitively with Sinclair’s mandrels. PMA offers carbide mandrels in .17, .20, .22, 6mm, 6.5mm, 7mm and .30-caliber. These will work with Sinclair Int’l and 21st Century neck-turners, as well as PMA neck-turners. PMA tells us: “We now have carbide neck-turning mandrels in stock. These mandrels are made with high-tech CNC grinding-machinery, and should give you excellent results. We hope to be add other larger-caliber carbide mandrels to our lineup in the future.”
Synthetic Motor Oil for Special Tasks
Here’s big news for target shooters (especially benchresters). There’s a new, premium fixed-power scope option with ED glass. 
$49.95 Carbide Mandrels from PMA Tool
