The FBI released its annual Crime in the United States report on November 10, 2014. This study revealed that, in 2013, the USA violent crime rate fell another 5.1 percent from 2012, so it is now at its lowest level since 1978. Moreover, the murder and manslaughter rate fell 4.4 percent, dropping to the lowest level since 1968.
This is very good news. From a public policy perspective, this is very important data that should help inform decision-making. The NSSF urges gun-owners to cite these statistics when unreasonable or irrational new gun control laws are proposed.
More Guns, Less Crime
While the crime rate has been dropping steadily for more than 20 years, the number of firearms in the hands of law-abiding Americans has been rising dramatically. So, statistics prove that we really have witnessed “more guns, less crime”. Earlier this year, the NSSF released a video that demonstrates this point very effectively:
63% of Americans Believe Gun in Home Increases Safety
A new Gallup survey released last week that found 63 percent of Americans believe that having a gun in the house makes it a safer place, a doubling of that number since 2000. The fact that more than six out of ten Americans have reached this conclusion demonstrates that the majority of Americans appreciate their Second Amendment rights to defend home and family.
What Counts as “Violent Crime”?
In the FBI’s Uniform Crime Reporting (UCR) Program, violent crime is composed of four offenses: murder and nonnegligent manslaughter, rape, robbery, and aggravated assault. Violent crimes are defined in the UCR Program as those offenses which involve force or threat of force.
Long-Term USA Crime Trends
In 2013, an estimated 1,163,146 violent crimes occurred nationwide, a decrease of 4.4 percent from the 2012 estimate. When considering 5- and 10-year trends, the 2013 estimated violent crime total was 12.3 percent below the 2009 level and 14.5 percent below the 2004 level. There were an estimated 367.9 violent crimes per 100,000 inhabitants in 2013, a rate that declined 5.1 percent when compared with the 2012 estimated rate.
Snow is already on the ground in many Northern states. But hunting season is still open in some areas. So, that’s your excuse to buy a nice, new Howa hunting rifle with a special full hydro-dip winter camo covering. Right now, Legacy Sports International is offering the Howa Hogue Snowking combo, and the Howa Blackhawk Talon Snowking combo. These exclusive models have been extremely popular when offered in the past.
Howa Snowking models feature a Howa 1500 action with 22″ barrel, fitted in either Hogue or Blawkhawk Talon stocks covered with King’s Snow Camo designs. The Howa Hogue Snowking combo comes with a Nikko Stirling Gameking 4-16x44mm Mil-Dot scope, and King’s Snow Camo Hogue over-molded synthetic stock. The Howa Blackhawk Talon Snowking combo comes with the same Nikko 4-16x44mm Mil-Dot scope but with a King’s Snow Camo Blackhawk Talon stock. Available chamberings are: .223 Rem, .243 Win, .22-250, .308 Win. If you want one of these special edition Howas, order through Bill Hicks Company, 1-800-223-0702.
Packages Include:
– Howa rifle with new HACT™ 2-Stage Trigger System.
– BLACKHAWK® Talon™ OR Hogue® Overmolded™ Stock in Kings® Snow Shadow™ Camo.
– Color Matched Nikko Stirling Gameking 4-16×44 scope with LRX Range-finding Reticle.
– Color Matched Scope, Rings and One Piece Base (Mounted and Bore Sighted before shipping).
Our friend (and ace benchrest shooter) Lou Murdica recently tested some prototype Accurate LT-30 powder from Western Powders. This is a new formulation similar to LT-32, but with a slightly faster burn rate. That makes LT-30 ideal for the 30 BR and other cartridges that presently work well with Hodgdon H4198. Lou tells us: “At a 100/200-yard group benchrest match in Phoenix this weekend, I shot the new LT-30 powder in a 30BR. I used Berger 115gr bullets in a rifle with a Shilen barrel. This powder is just like the LT-32 powder… just a little faster.”
Lou added that, in the 30 BR, this powder delivers accuracy similar to Hodgdon H4198, but 30 BR loads with match bullets can be pushed up to 200 FPS faster without apparent pressure issues. That’s significant. Lou posted some targets which do indicate that LT-30 offers excellent accuracy. Here are 5-shot groups shot with Berger 115s and LT-30 powder:
Western Powders has not yet announced an “arrival date” for LT-30, so we can’t tell you when you will see LT-30 at retail powder vendors. It appears this new propellant will go into production in the near future, though LT-30 is not yet listed on the Accurate Powders website.
Accurate’s New LT-30 Powder Is Like LT-32 but a Little Bit Faster…
LT-32 is a fine-grained extruded powder that was developed for 6mm PPC benchrest competitors. Already a proven match winner, LT-32′s excellent shot-to-shot consistency and low standard deviation (SD) make this a very good choice for competitive benchrest shooting. Due to its small grain size, LT-32 flows like a spherical powder and allows for very precise hand-loading. It also offers impressive accuracy in varmint and tactical cartridges, including the .223 Rem, and 20 Tactical. If you haven’t tried LT-32 in your PPC or varmint cartridges yet, you should give it a try. LT-32 is one of the most accurate powders on the market, when used with appropriate bullet/cartridge combos.
Looking to shoot an AR-platform rifle out past 500 yards? Then you should read two recent articles by AR guru Glen Zediker. Author of The New Competitive AR-15 and The Competitive AR15 Builders Guide, Zediker is an expert when it comes to AR-platform rifles — he knows as much as any guy around. Glen believes ARs have excellent long-range capability, provided they are built to high standards, with good barrels. Glen says: “a properly configured AR-15 is easily capable of good performance at 500+ yards. Good performance means it can hit a 1-foot-square target all the time. Competitive shooters can cut that standard in nearly half (the X-Ring on an MR1 600-yard NRA High Power Rifle target is 6 inches, and high X-counts are commonplace among more skilled shooters).”
Published in the Cheaper than Dirt Shooter’s Log, Zediker’s pair of articles cover the history and upgrading of the AR-15. Part One reviews the AR’s development as an accurate firearm, tracing its evolution from a Vietnam-era combat weapon to what is now a favored target rifle of High Power competitors. READ PART ONE.
Part Two discusses the specifics that make an AR accurate at 500 yards and beyond. Zediker talks about barrel configuration (profile and twist rate), bullet selection, floating handguards, and proper mounting of optics or iron sights. READ PART TWO.
Barrel Twist Rate
To stabilize anything longer than a 68- or 69-grain bullet, the barrel twist rate must be — at minimum– 1-in-8. Twist rates reflect how far the bullet travels along the lands or rifling to make one complete revolution. So, 1-in-8 (or 1-8, 1:8) means “one turn in eight inches.” I think it’s better to go a little faster in twist. There is nothing wrong with a 1:7 twist. The 90-grain bullets require a 1:6.5, and that is getting on the quick side. If you want to shoot Sierra 77s or equivalent, and certainly anything longer, 1:8 is necessary. By the way, it is bullet length, not weight, which constitutes the necessary twist rate to launch a stable bullet.
Optics Mounting
Correct optical sight positioning can be a challenge. With a flattop upper, I need a good inch additional forward extension at the muzzle side of the upper for the sight mount bases to avoid holding my head “back” to get the optimal view through the scope. A longer rail piece is necessary for my builds as a result.
Buttstock Length and Adjustment
An adjustable buttstock is valuable, and even more valuable if it’s well-designed. Mostly, a standard stock is too short, and the cheek area sits too low. Adding length helps a lot by itself. There are assemblies that replace the standard buttplate to allow for length and, usually, height and rotation adjustments for the buttpad. An elevation-adjustable cheekpiece is a big help to attain a solid position.
On the 11th hour, of the 11th day, of the 11th month of 1918, bugle calls signaled the ‘cease fire’ ending the First World War. (The official Armistice was signed earlier that morning.) To those who endured it, WWI was the “Great War”, “the War to End All Wars.” Tragically, an even greater conflict consumed the world just two decades later.
Today, 96 years after the end of WWI, Americans mark the anniversary of the WWI Armistice as “Veterans Day”. In Canada it is known as Remembrance Day. On this solemn occasion we honor all those who have served in the military in times of war and peace.
While more WWII veterans pass away each year, there are still over 23 million veterans in the United States. Take time today to honor those soldiers, sailors, and airmen who have served their nation with pride. Today we remember that… “All gave some, and some gave all.”
Former Secretary of Veterans Affairs Dr. James Peake asked Americans to recognize the nation’s 23.4 million living veterans and the generations before them who fought to protect freedom and democracy: “While our foremost thoughts are with those in distant war zones today, Veterans Day is an opportunity for Americans to pay their respects to all who answered the nation’s call to military service.”
On Veterans Day we especially need to remember the seriously wounded combat veterans. These men and women summon great courage every day to overcome the lasting injuries they suffered in battle. Some of these soldiers have lost limbs, yet volunteered to return to combat duty. That is dedication beyond measure.
National Veterans Day Ceremony
The Veterans Day National Ceremony is held each year on November 11th at Arlington National Cemetery. The ceremony commences precisely at 11:00 a.m. with a wreath laying at the Tomb of the Unknowns and continues inside the Memorial Amphitheater with a parade of colors by veterans’ organizations and remarks from dignitaries. The ceremony is intended to honor and thank all who served in the United States Armed Forces. Major regional ceremonies are also held throughout the country. CLICK HERE for list of regional Veterans’ Day events.
A Negligent Shooter Gets Lucky
Here we have a story so filled with negligent acts that I can only marvel that the shooter survived the experience. The photo and narrative were provided by the gunsmith who took in the repair job, my comments are in italics. It’s worth reading, we can’t get enough safety warnings in our hobby. — GS Arizona, Riflemans Journal
Below is a sectioned barrel showing an 80gr Sierra that was fired in a .223 bolt action with a cleaning rod in the bore. Both the bullet and the rod are still in the bore.
This article originally appeared in the Riflemans Journal website.
Description of Incident (with Commentary)
The shooter had a stuck case in his .223 chamber. The stuck case was actually a loaded round that didn’t fire. It wouldn’t extract because it was a .222 case that got mixed in with his .223 brass. [He had loaded the wrong brass.] I saw the loaded round with an 80gr bullet in it and a light primer strike. Negligent Act #1: Wrong brass was mixed in with the brass being reloaded.
The shooter removed the stuck case with a 3-piece aluminum rod. Negligent Act #2: Hammering out a loaded round with a cleaning rod. People have been killed doing this as the round can fire and drive the cleaning rod right into you. I remember one such incident about 5 years ago, the shooter was pounding out a stuck round, the cleaning rod went right through him, he didn’t survive.
The shooter didn’t notice only two segments of the cleaning rod came out when he removed it. Negligent Act #3: If you put anything at all down the barrel of a rifle you’d better make darn sure you got it all out before doing anything else!
He then chambered another round and fired it. Negligent act #4: If you’ve had a barrel obstruction of any kind, and if you’ve put something in the barrel, look through the barrel before proceeding! Within the past two years I know of an incident in which a benchrest shooter was killed in exactly this manner. The pressure built up and the rifle bolt came out of the receiver and into his chest.
The shooter is ‘OK’, but did not escape unscathed. He said there was a huge explosion and after regaining his senses found he was bleeding heavily from his forehead. The blood was thick enough that it ran in his eyes and he couldn’t see. In his words “I thought I was going to die”.
He has what looks like a pretty deep cut about an inch long on the side of his head, right in line with his right eye starting where the eye socket turns out to the side of the skull. And no telling what he’s got in the way of brass particles embedded in his forehead.
He was shooting on private property, and was alone when this happened. Negligent Act #5: Don’t shoot alone! Accidents happen, this is just one more example. If we could predict accidents, we wouldn’t have them. Always shoot with at least one other person.
He managed to get the bleeding stopped, or at least under control, packed his car and drove himself home without seeking immediate medical attention. Negligent Act #6: This one could have cost him his life after being lucky enough to survive the incident. There’s no way to know what’s happened just after an incident like this. He should have been at a hospital getting checked for shrapnel in the head.
The rod and slug could not be driven out. Since the barrel had a high round count there was no point in trying to salvage it. Note that the aluminum rod is expanded to a tight fit in the bore for the first couple inches. The base of the bullet is a little over 2″ from the mouth of the chamber.
What we’ve seen here is negligence and an absolute indifference to the established rules of safe reloading and gun handling, from start to finish, capped off with the shooter’s foolish avoidance of medical treatment. This shooter is lucky to be alive, but he’s surely used up all his luck. Don’t assume you’ll be so fortunate.
Today marks the 239th anniversary of the founding of the U.S. Marine Corps. At Tun Tavern in Philadelphia on November 10, 1775, the Marine Corps was formed. At a ceremony marking the Marine’s “birthday”, (held at the Marine Corp Air Station in Yuma, AZ), Cpl. Uriel Avendano provided perspective: “The word Marine spans time, places, people, personalities and exploits. The faces of the Marines of the past tell the story of a tough, disciplined and proud people who loved the challenge and gave nothing but their best. Today the uniform has changed, but the motives remain the same… [O]ur duty remains the same. We are ready for anything, at any time and in any place.”
One of the most unique and exotic rifles in the NRA Museum is the Szecsei & Fuchs Double Barrel Bolt Action Rifle. “This is the … most substantial bolt action rifle ever made,” said NRA Museums Senior Curator Philip Schreier. This unique double-barrel bolt-action rifle loads two cartridges at the same time. It is the world’s only repeating double rifle design. Incorporating titanium components to reduce weight, this .416 Remington Magnum rifle has an eight-shot capacity, feeding from a beautifully engraved massive magazine assembly mounted under the receiver. Hungarian inventor Joseph Szecsei developed this innovative design after being charged simultaneously by three elephants in 1989.
An engineering tour de force, this elaborately engraved rifle is also a work of art. On the action, and bottom metal are engraved images of the “Big Five” African game species: elephant, cape buffalo, rhino, lion, and leopard. This rifle was recently featured on Curator’s Corner on the Outdoor Channel, and it now resides behind glass in the Robert E. Peterson Collection at the NRA Museum.
This amazing twin-barreled bolt-gun has a closing mechanism that locks two separate bolt bodies into the chambers of the right and left barrels. Yes there are two firing pins, two ejectors, two extractors, and two triggers. We’re not sure how one jumbo camming system closes two bolts — Perhaps one of our gunsmith readers can explain how this system works.
This Rifle Has TWO Barrels and TWO Bolts
Just $78,000 at “Half-off Pricing”
Shown here (above and below) is another Szecsei & Fuchs double bolt rifle chambered in .416 Remington. This example, without the “Big Five” animal engravings, sold a few years back on Gunbroker.com for $78,000. That astronomical sum is just half the original cost, according to the seller. This amazing double safari rifle has 22″ barrels and weighs 11.5 pounds.
Do-It-Yourself Joystick Rest — Jeff’s Labor of Love
Quite a few competitors chamber their own barrels, and a few construct their own stocks. But Jeff Godfrey takes the prize for do-it-yourself audacity — he built his own co-axial front rest from scratch. Sam Hall provides this report:
“Jeff, one of Piedmont Gun Club’s regulars, is a talented fabricator. He made one of the smoothest joystick rests that I have ever laid my hands on. Jeff’s home-built coaxial rest rivals the Farley and Seb Max. It will also handle a wide fore-end Heavy Gun. Constructing virtually every part of this rest from scratch, Jeff made his own co-axial to save money. You have to admire his ingenuity and his dedication. Jeff says it took him over 100 hours to make. He said there would be no way he could make another one for profit!”
Stiller’s Precision Firearms is now offering its new line of rear lug, benchrest-grade rimfire actions, the 2500X (single-shot) and the 2500XS (sporter class mag-fed). These actions have already performed superbly in competition (see below). These actions represent the state-of-the-art in rimfire receivers. Top rimfire benchrest shooters are building rifles around the new Stiller actions and the results have been very promising. These actions offer true benchrest-grade manufacturing tolerances plus a superior firing pin system that should allow greater shot-to-shot consistency. Expect fewer unexplained fliers with these Stiller actions compared with older, factory-based actions (such as the Rem 40X).
Stiller 2500X Rimfire Action
The 2500X is Stiller’s new rear lug rimfire benchrest action. This features an Anschutz-style loading ramp, center recoil slot, side bolt release, and a unique shroud/firing pin system for perfect alignment (and more consistent ignition). Unlike many rimfire actions, the 2500X has a trigger hanger for easy trigger maintenance. The 2500X’s body and bolt are crafted from 416R stainless steel with a nitride finish for smooth and trouble-free operation. The outside is OD ground after nitriding for precise tolerances and a distinctive two-tone look.
Stiller 2500SX Rimfire Sporter Action
The 2500XS is a rear lug rimfire benchrest action for the Sporter Class. The “XS” model features a Sako magazine and easy-to-use loading ramp. Like the 2500X, the “XS” has an advanced shroud/firing pin system, plus a trigger hanger for easy trigger maintenance. The bolt and body are nitrided, 416R stainless OD ground for a dimensionally precise, two-tone finish. This lightweight action is specifically designed for IR50/50 sporter class benchrest. It comes with one (1) magazine.
Proof of Performance — 2500X Action Shoots 250-25X
Mike Kuklis’s new rimfire BR rifle built on a Stiller 2500X action delivered an impressive 250-25X in competition last week. Mike drilled this superb 250-25X card at the Tuckertown BR Barn on the way to a 1000-86X match win. Credit J. Miller for the photos from Benchrest Central.
Product Tip from EdLongrange. We welcome reader submissions.
More Guns, Less Crime
Our friend (and ace benchrest shooter) Lou Murdica recently tested some prototype Accurate LT-30 powder from 
Accurate’s New LT-30 Powder Is Like LT-32 but a Little Bit Faster…
On the 11th hour, of the 11th day, of the 11th month of 1918, bugle calls signaled the ‘cease fire’ ending the First World War. (The official Armistice was signed earlier that morning.) To those who endured it, WWI was the “Great War”, “the War to End All Wars.” Tragically, an even greater conflict consumed the world just two decades later.
This amazing twin-barreled bolt-gun has a closing mechanism that locks two separate bolt bodies into the chambers of the right and left barrels. Yes there are two firing pins, two ejectors, two extractors, and two triggers. We’re not sure how one jumbo camming system closes two bolts — Perhaps one of our gunsmith readers can explain how this system works.
Do-It-Yourself Joystick Rest — Jeff’s Labor of Love
