Does your Black Rifle have a sloppy upper/lower fit? That can be annoying; what’s more, loose fit can limit accuracy potential. Here’s a clever solution for poor-fitting AR-15 and AR-10 upper and lower receivers. The new JP MicroFit takedown pins can improve even the sloppiest ARs, providing a rock-solid upper/lower receiver fit.
MicroFit pins come in three sizes and two types: standard (“mean”), oversized, and undersized, with types for both front and rear of the receivers. The mean pins match standard takedown pin sizes while the over- and under-sized vary by slightly more than .001″ (+/-) from the standard diameter. NOTE: Although most poor-fitting receivers are loose, some are too tight. Very tight receivers, such as post-Cerakote, can be remedied with the undersized pins.
Shown is JP Enterprises’ PSC-12™ upper assembly with LRP-07™ lower assembly.
“An AR with a loose upper/lower receiver… will not reach its accuracy potential. That was the goal with our original JP Tension Pin, but MicroFit™ pins provide the same result without tool-assisted takedown. The MicroFit pins require no modification to the receiver. They simply replace your current pins”, stated JP Enterprises founder John Paul.
JP’s MicroFit pins feature a polished black finish with a hard, durable QPQ coating. This provides smooth insertion/removal plus excellent corrosion resistance. All pins feature a two-faceted punch or bullet capturing recess. This allows the user to apply force to the pins safely without risking scratching the receiver. JP’s MicroFit pins are sold as both as individual pins and as replacement sets.
Share the post "MicroFit Takedown Pins for AR-Platform Rifles"
Do you own an AR-platform pistol, or are you considering purchasing one? Then you should read the Special Notice issued on 12/18/2020 by the Bureau of Alcohol, Tobacco, Firearms and Explosives (“ATF”) concerning features of these firearms. Basically, the ATF is considering reclassifying many of these guns as “short-barreled rifles” because the attached braces effectively function like a rifle buttstock. For decades short-barreled rifles have been a registered item under ATF rules requiring an application and tax stamp. The ATF is now looking at multiple factors to consider the status of AR Pistols. These factors are listed in the ATF’s recent Special Notice: Objective Factors for Classifying Weapons with “Stabilizing Braces”.
Here is text taken from the ATF’s notice in the Federal Register. Take heed — this is only a partial section of the document. You should read theFULL DOCUMENT (PDF Version).
ATF has observed that the development and production of firearms with arm braces has become more prevalent in the firearms industry and, relatedly, that requests for classifications for this kind of firearm design have also increased. Therefore, ATF is publishing this notice to aid the firearms industry and public in understanding the objective design features that FATD (Firearms and Ammunition Technology Division) considers when evaluating firearm samples submitted with a stabilizing brace or similar attachment.
The objective design features ATF considers in determining whether a weapon with an attached “stabilizing brace” has been “designed or redesigned, made or remade, and intended to be fired from the shoulder” include, but are not limited to:
Type and Caliber. The type and caliber of firearm to which the stabilizing brace or similar item is installed. A large caliber firearm that is impractical to fire with one hand because of recoil or other factors, even with an arm brace, is likely to be considered a rifle or shotgun. Weight and Length. The weight and length of the firearm used with the stabilizing brace. A firearm that is so heavy that it is impractical to fire or aim with one hand, or so long that it is difficult to balance the firearm to fire with one hand, is likely to be considered a rifle or shotgun. Length of Pull. The “length of pull” refers to the distance from the trigger to the point at which a stock meets the shoulder. This is a measurement for rifles and shotguns used to accommodate shooters of different sizes. Because an arm brace need only reach the forearm, the distance between the trigger and the back of the brace is generally expected to be shorter than the distance between the trigger and the back of a stock on a weapon designed and intended to be fired from the shoulder. This measurement is not necessarily determinative of the intent of the manufacturer but is used in making an evaluation of the firearm. If a brace is of a length that makes it impractical to attach to the shooter’s wrist or forearm, then that may demonstrate that it is not designed as brace but rather for shoulder fire. Attachment Method. The method of attachment of the stabilizing brace, to include modified stock attachments, extended receiver extensions, and the use of spacers. These items extend the distance between the trigger and the part of the weapon that contacts the shooter, whether it is a stock or stabilizing brace. Use of these items indicates that the weapon is designed and intended to be fired from the shoulder because they extend a stabilizing brace beyond a point that is useful for something other than shoulder support. Stabilizing Brace Design Features. The objective design features of the attached stabilizing brace itself are relevant to the classification of the assembled weapon, and include:
— The comparative function of the attachment when utilized as a stabilizing brace compared to its alternate use as a shouldering device;
— The design of the stabilizing brace compared to known shoulder stock designs;
— The amount of rear contact surface area of the stabilizing brace that can be used in shouldering the weapon as compared to the surface area necessary for use as a stabilizing brace;
— The material used to make the attachment that indicates whether the brace is designed and intended to be pressed against the shoulder for support, or actually used on the arm;
— Any shared or interchangeable parts with known shoulder stocks; and
— Any other feature of the brace that improves the weapon’s effectiveness from the shoulder-firing position without providing a corresponding benefit to the effectiveness of the stability and support provided by the brace’s use on the arm.
Aim Point. Appropriate aim point when utilizing the attachment as a stabilizing brace. If the aim point when using the arm brace attachment results in an upward or downward trajectory that could not accurately hit a target, this may indicate the attachment was not designed as a stabilizing brace. Secondary Grip. The presence of a secondary grip may indicate that the weapon is not a “pistol” because it is not designed to be held and fired by one hand. Sights and Scopes. Incorporation of sights or scopes that possess eye relief incompatible with one-handed firing may indicate that the weapon is not a “pistol” because they are designed to be used from a shoulder-fire position and are incompatible for the single-handed shooting that arm braces are designed and intended. Peripheral Accessories. Installation of peripheral accessories commonly found on rifles or shotguns that may indicate that the firearm is not designed and intended to be held and fired with one hand. This includes, but is not limited to, the installation of bipods/monopods that improve the accuracy of heavy weapons designed and intended to be fired from the shoulder; or the inclusion of a magazine or drum that accepts so many cartridges that it increases the overall weight of the firearm to a degree that it is impractical to fire the weapon with one hand even with the assistance of a stabilizing brace.
The ATF concludes: “These factors are based on known stabilizing braces and similar attachments. No single factor or combination of factors is necessarily dispositive, and FATD examines each weapon holistically on a case-by-case basis. …. Moreover, in addition to the objective design features of a submitted sample, FATD also considers the marketing of both the item and the firearm to which it is attached, compared to the manufacturer’s stated intent when submitting an item.”
AR-Platform Pistols — Current Options on the Market
If you are interested in learning more about AR-platform pistols with short barrels, PewPewTactical.com has published a useful article entitled: Six Best AR-15 Pistols [2020 Complete & Build List]. That article quickly covers the legal status of such firearms, at least before the recent ATF Guidance document:
So, what exactly is an AR pistol? If you want the complex legal definition of a pistol Check ATF’s Website.
“The short version is: An AR Pistol is an AR-15 that was built from the start to be a pistol — it also has a barrel less than 16 inches in length and does not have a stock. Generally, an AR-15 Pistol will have a stabilizing brace instead of a stock, but that isn’t required.”
ATF Changes May be Coming — And You Must Consider State Laws As Well
However, PewPewTActical notes that: “The ATF is reevaluating its stance on stabilizing braces. Pew Pew Tactical is monitoring the situation and will update our readers if there are any legal changes in the future.” And… the article further cautions: “Double check your state law before embarking on this kind of build, what federally qualifies as a ‘firearm’ or ‘pistol’ might be an ‘assault pistol’ in your state.” SOURCE: PewPewTactical.com
Share the post "ATF Issues Notice Regarding AR Pistols — Factors to Consider"
AR-platform rifles can be maintenance-intensive beasts. But some AR owners make the situation worse by not regularly cleaning important small parts, or by using too much oily/greasy lubricants in the wrong places. A properly maintained and lubricated AR15 can shoot hundreds of rounds (between cleanings) without a problem. If you learn where (and where not) to apply lubricant, you’ll find that your AR will run more reliably and the task of cleaning the bolt and bolt carrier will be less of a burden.
Here is a good video that explains AR-15 Cleaning and Maintenance. In this 30-minute NSSF video, Gunsite Academy instructor and gunsmith Cory Trapp discusses the proper way to clean and maintain the AR-15 carbine. Very knowledgeable, Trapp provides rock-solid advice for AR owners. Along with cleaning procedures, this video explains how to inspect key components and how to function-test your AR before each shooting session.
If you want to keep your black rifle running smoothly and reliably, you must clean it regularly and follow the correct maintenance procedures. Here’s another good video that explains how to properly disassemble and clean AR-platform rifles.
Take-Down and Full Cleaning of AR15 by Jerry Miculek
Here ace shooter Jerry Miculek takes down and cleans an AR-platform rifle belonging to his daughter Lena. This is a good video because Lena’s rifle was “run hard and packed up dirty” so you can see where carbon and grease build up. This 35-minute video is very thorough. Jerry is one of the nation’s top action carbine shooters, so listen carefully to his advice on cleaning and lubrication.
Share the post "How to Clean and Maintain Your AR-Platform Rifles"
In these trying times, with violence in our cities, and the Democratic Presidential candidate calling for the outright banning of mag-fed, semi-auto rifles, we know that many readers are seeking to purchase defensive firearms (while a citizen still can). If you are looking for a black rifle and/or a defensive pistol, check out Palmetto State Armory (PSA). This company, one of American’s largest Black Rifle retailers, maintains a large inventory of complete ARs, AR lowers, AR uppers, and handguns — all at very competitive prices. PSA also sells triggers and optics. And yes, PSA has ammunition in stock at fair prices.
Right now PSA is running a big Labor Day Sale. The sale has started, so you can enjoy significant savings for the next few days.
Black Rifles and Rifle Components on Sale
Whether you want a complete AR-platform rifle, a complete upper, or components for uppers and lowers, PSA has what you need. PSA also carries aftermarket triggers, sights, magazines, and other Black Rifle accessories. Here are some of the complete rifles, uppers, and lowers currently on sale at PSA. CLICK HERE for AR-Platform rifles, components, and accessories
Handguns on SALE at PSA
With the record-breaking volume of gun sales in recent months, many smaller gunshops have very limited inventory of handguns, particulary compact pistols suitable for CCW. However, PSA has a large supply of pistols, including popular carry guns from S&W, Ruger, Springfield Armory and other leading brands. Here’s a small sample of handguns in stock today at PSA.
PSA Ammunition on SALE
This is a small sample of the ammunition available now. This is in-stock now, ready to ship. Go to PSA’s Ammo Page to find other cartridge types on sale, including .40 SW, .357 Magnum, .308 Win, and .22 LR.
Share the post "Big Labor Day Weekend Sale at Palmetto State Armory"
Many of our readers have never had a chance to shoot much past 600 yards. How far away does a 1000-yard+ target really seem to the naked eye? Well this short video answers that question. Gorilla Ammo, the video’s producers, used a camera-carrying aerial drone to fly downrange from the firing line all the way out to 1122 yards (and back again). Watch the drone footage at 0:00-0:07 and especially 0:48-1:03. The “bird’s-eye view” really gives you a sense of the distance. The “fly-back” at 0:48-1:03 time-mark is what makes this video worth watching.
The video features prone shooting at steel targets placed at 750 and 1122 yards. We do apologize for the lame, “oh so serious” voice-over which attempts to make this rather ordinary range session seem like some kind of life-changing experience. (Frankly, you may just want to turn the sound off — it’s that annoying.) It’s really not that big a deal to hit steel at 750 yards with a quality AR-15, chambered in .223 Rem, shooting Sierra 77 grain MatchKings.
Hitting Steel at 1122 Yards with 2540 FPS Ammo Can Be Challenging
The 1122-yard hits are a bit more impressive. Gorilla Ammo lists a relatively sedate 2540 fps Muzzle Velocity for its .223 Rem 77gr SMK ammunition. According to JBM Ballistics, at 1125 yards, that 2540 fps load has 68.3 MOA of drop from a 100-yard zero (firing at sea level and 80° F ambient). Morever the bullet goes trans-sonic around 750 yards (losing stability) and is traveling just 933 fps at impact. And the wind’s the killer — at 1125 yards, with this bullet/load, a mere 2 mph, full-value wind change can move the Point of Impact over three feet!
Share the post "Eye in the Sky — Drone View of 1122-Yard Shooting Session"
AR-platform rifles are fun and versatile, but the standard, mil-spec triggers leave much to be desired. They tend to be gritty, with creep and heavy pull weight. One of the easiest, most effective AR upgrades is a trigger group swap. An improved fire control group makes a huge difference. There are many aftermarket trigger options for the AR platform rifles. Choose single-stage or two-stage, either standard trigger assembly or unitized “drop-in” trigger, such as those made by Timney or Triggertech.
When upgraded with a precision trigger and match barrel, AR-platform rigs work great in NRA High Power competitions (Photo from NRA Blog, at Camp Perry).
Two-Stage vs. Single-Stage Triggers
Two-stage triggers have two separate movements. The first stage offers a light, spring-loaded pressure that works against the shooter’s pull until stopping at the second stage – this is called “take-up”. If there is no spring pressure, it is known as “slack”. Should the shooter continue to pull the trigger once he’s arrived at the second stage, the mechanism will operate like a single-stage trigger from there until engaging the sear and firing the gun. Some shooters prefer a two-stage trigger because it allows a mental preparation (first stage) before the final decision to “break the shot”.
Single-stage triggers feature no take-up or slack, as they begin engaging the sear as soon as the shooter begins pulling the trigger. Some competitive shooters prefer the two-stage trigger because of the feedback it provides during its first stage, while other shooters, including those using their rifle in tactical scenarios, may want the surety of a single-stage trigger, ready to engage and fire once their finger is inside the trigger guard. Regardless of preference, a good trigger will feature minimal creep and should be free of grittiness, providing a smooth, even break.
Drop-In Trigger Assembly vs. Standard Trigger Group
Once you decide between a single-stage or two-stage trigger, you can choose between standard and drop-in trigger groups. Standard trigger groups feature all the fire control group parts separated, and need to be pieced together and installed much like a mil-spec trigger, while drop-in trigger are pre-assembled and contained within a casing that simply drops in to the receiver and accepts the pins, hence the name.
After-Market Trigger Comparison
Some shooters prefer drop-in triggers due to the ease of installation, while others opt for standard groups so they can access the components individually for cleaning adjustment or replacement. If one piece of a drop-in trigger fails, you’ll need to either replace the entire unit or send it to the manufacturer for repair, whereas you may be able to simply replace the broken component of a standard trigger without needing a whole new trigger set.
Trigger Terminology — “Creep”, “Stacking”, “Overtravel”
“Creep” or “travel” is the distance the trigger moves between the end of take-up and when the trigger breaks to fire the fun. Too much creep can affect accuracy, but no creep can be unsafe, as the shooter may not be prepared to fire. “Stacking” occurs when the trigger weight actually increases during travel — this shouldn’t happen. Lastly, “overtravel” is the distance the trigger continues moving back after the gun fires.
This article is based on a longer story in the NRA Blog.
Share the post "Trigger Tech: Trigger Options for AR-Platform Rifles"
Many of our readers use AR-type rifles for Service Rifle matches, varmint hunting, 3-Gun competition, or defensive use. AR-platform rifles can be configured in a multitude of ways to suit the application. But if you plan to put together your own purpose-built AR rifle, how do you get started?
For AR Do-It-Yourselfers, we suggest reading Glen Zedicker’s book, the Competitive AR-15 Builders Guide. Following on Zedicker’s The Competitive AR15: Ultimate Technical Guide, the Builders Guide provides step-by-step instructions that will help non-professional “home builders” assemble a competitive match or varmint rifle. This book isn’t for everyone — you need some basic gun assembly experience and an aptitude for tools. But the AR-15 Builders’ Guide provides a complete list of the tools you’ll need for the job, and Zedicker outlines all the procedures to build an AR-15 from start to finish.
One of our Forum members who purchased the AR-15 Builders Guide confirms it is a great resource: “Much like any of the books Mr. Zediker puts out this one is well thought-out and is a no nonsense approach to AR building. I can not stress how helpful this book is from beginner to expert level.”
Along with assembly methods, this book covers parts selection and preparation, not just hammers and pins. Creedmoor Sports explains: “Knowing how to get what you want, and be happy with the result, is truly the focus of this book. Doing it yourself gives you a huge advantage. The build will honestly have been done right, and you’ll know it! Little problems will have been fixed, function and performance enhancements will have been made, and the result is you’ll have a custom-grade rifle without paying custom-builder prices.” Other good resources for AR projects is Gunsmithing the AR: The Bench Manual, and the Building Your AR from Scratch DVD.
Share the post "Zediker Book Helps with Build-You-Own AR-15 Projects"
Looking to shoot an AR-platform rifle out past 500 yards? Then you should read two articles by AR guru Glen Zediker. Author of The New Competitive AR-15 and The Competitive AR15 Builders Guide, Zediker is an expert when it comes to AR-platform rifles. Glen believes ARs have excellent long-range capability, provided they are built to high standards, with good barrels.
Glen says: “a properly configured AR-15 is easily capable of good performance at 500+ yards. Good performance means it can hit a 1-foot-square target all the time. Competitive shooters can cut that standard in nearly half (the X-Ring on an MR1 600-yard NRA High Power Rifle target is 6 inches, and high X-counts are commonplace among more skilled shooters).”
Published in the Cheaper than Dirt Shooter’s Log, Zediker’s articles first cover the history of the AR-15, and then explain how AR-platform accuracy can be optimized. Part One reviews the AR’s development as an accurate firearm, tracing its evolution from a Vietnam-era combat weapon to what is now a favored target rifle of High Power competitors. READ PART ONE.
Part Two discusses the specifics that make an AR accurate at 500 yards and beyond. Zediker talks about barrel configuration (profile and twist rate), bullet selection, floating handguards, and proper mounting of optics or iron sights. READ PART TWO.
Barrel Twist Rate
To stabilize anything longer than a 68- or 69-grain bullet, the barrel twist rate must be — at minimum– 1-in-8. Twist rates reflect how far the bullet travels along the lands or rifling to make one complete revolution. So, 1-in-8 (or 1-8, 1:8) means “one turn in eight inches.” I think it’s better to go a little faster in twist. There is nothing wrong with a 1:7 twist. The 90-grain bullets require a 1:6.5, and that is getting on the quick side. If you want to shoot Sierra 77s or equivalent, and certainly anything longer, 1:8 is necessary. By the way, it is bullet length, not weight, which constitutes the necessary twist rate to launch a stable bullet.
Optics Mounting
Correct optical sight positioning can be a challenge. With a flattop upper, I need a good inch additional forward extension at the muzzle side of the upper for the sight mount bases to avoid holding my head “back” to get the optimal view through the scope. A longer rail piece is necessary for my builds as a result.
Buttstock Length and Adjustment
An adjustable buttstock is valuable, and even more valuable if it’s well-designed. Mostly, a standard stock is too short, and the cheek area sits too low. Adding length helps a lot by itself. There are assemblies that replace the standard buttplate to allow for length and, usually, height and rotation adjustments for the buttpad. An elevation-adjustable cheekpiece is a big help to attain a solid position.
Share the post "Zediker Examines Long Range Shooting with AR-Platform Rifles"
Ever wondered how the parts inside an AR15 work together? Just exactly how does the reciprocating bolt carrier feed rounds from the magazine? How do the elements in the trigger group work and reset after each shot? How does the gas system bleed gas from the barrel and operate the bolt carrier? These and other questions are answered in this eye-opening video from 45Snipers. Using “cutaway” 3D computer animation, this 5-minute video shows all features of an AR15 inside and out. This fascinating firearms animation allows the viewer to look inside the upper and lower receivers, into the bolt carrier, chamber, barrel, and magazine.
This video starts off slow and has annoying background music, but it is well worth watching if you own or shoot any AR-platform rifle. It illustrates all the key operations during the charging, loading, firing, and ejection processes. The cutaway animation shows how rounds are stripped from the magazine and then chambered. It then shows how every part of the trigger group works, and how the firing pin strikes the primer. You can even watch the bullet move down the barrel before the empty shell casing is removed from the chamber and tossed out the ejection port. Here are sample frames from the video:
Video find by Grant Ubl. We welcome reader submissions.
Share the post "AR15 3D Animation — See How an AR Really Works"
ARs in PRS? Yes PRS has a “Gas Gun” division. And frankly, shooting a PRS match is one of the most fun and challenging things you can do with your Black Rifle (Beto O’Rourke notwithstanding). Since the early days of the PRS, Gas Gun shooters have wanted to play. Recognizing the interest among semi-auto shooters, the PRS now offers a Gas Gun Series for semi-auto rifles such as AR15s and AR10s. The Gas Gun Series started in 2017, and has quickly become quite popular.
Photo Credit Michael Cage.
Gas Guns to 800 yards — Yes there are targets down there somewhere.
PRS Gas Gun Series Rules
For the new PRS “Gasser” Competition, the PRS developed rules on gun types, scoring, match timing, penalties, safety and other key topics. CLICK HERE for Full PRS Gas Gun Series Rules.
Open Division: Open Division rifles will not exceed a caliber of .30 or a velocity of 3,200fps. A match DQ will result any rounds over the speed limit of 3,200 fps (+/- 32 fps for environmental factors and equipment discrepancies). Match Officials may request at any point during a match that a competitor fire their rifle through chronograph. If the bullet exceeds the 3,200 fps speed limit, the shooter will receive an automatic match DQ. [“For Ammo in Open Class, 6mm and 6.5mm Creedmoor are popular.” — John Parker, SSUSA]
Tactical Division: Tactical Division: Intended to allow competitors the opportunity tocompete using traditional military and law enforcement caliber. This promotesActive Duty military and law enforcement competitors use of their Service and Department issued rifles. Tactical Light Division rifles are restricted to 5.56 NATO/.223 Remington and 7.62 NATO/.308 Winchester calibers only. .223 Bullet weight cannot exceed 77 grains and muzzle velocity cannot exceed 3,000 fps, .308 bullet weight cannot exceed 178 grains and muzzle velocity cannot exceed 2,800 fps. No modified wildcat rounds permitted to shoot in the Tactical Divisions. Tactical Division shooters will shoot the exact same COF as Open Division shooters. [NOTE: This division now replaces the previous Tactical Light and Tactical Heavy divisions.]
Scoring and Penalties
The Gas Gun Series utilizes a time plus penalty based scoring system for all match scoring. This means your score is your total combined time on all stages plus any penalties you may have accrued.
Stage Course of Fire and Targets
No more than 50% of the stages at a match can utilize an unlimited round count. At least 25% of the targets in Gas Gun Series match must be 2 MOA or smaller. Maximum distance is 800 yards.
The preferred rifle color choice at the first PRS “Gasser” Match was definitely black…
Gas Gun Match Loads — Short Range vs. Long Range
“The .223/5.56 [Tactical Light] guns had some lag time waiting on shot impacts. I believe the long-term solution may be to find a light and fast load for closer stages for near-instant reaction time and use a heavy load for the long shots to see splash and get the target to move a little more.” — Sean Murphy, Nightforce
Gear Options for PRS Gas Guns
There are many buttstock options for ARs. For the PRS game, we like the Magpul PRS stock. This features a quick-adjustable cheek-piece and butt-plate — allowing you to easily adapt head position and LOP for your discipline of the day. (You may want a different LOP for prone shooting vs. bench shooting). The Magpul stock works well in a rear bag.
We recommend something like the Blackhawk grip which is more comfortable than the typical grips supplied by most black rifle makers. Up front, you’ll want a handguard with adaptability. Shown is a handguard with Picatinny rails on top and on both sides, affording lots of options. We might move one of the rails to the bottom, however, so it could be used for a bipod mount.
Add Your Favorite Premium Barrel:
PRS with a Gas Gun — Gavin Gear’s Experience
Thinking of trying out the Precision Rifle Series, starting off with a gas gun? Well Gavin Gear of UltimateReloader.com did just that, competing in his first-ever PRS match up in Washington State. With its timed stages (some just 90 seconds long), Gavin learned that PRS is about speed as well as accuracy. As a PRS newbie, Gavin found the competition fun but challenging. Gavin’s account of his experiences, set forth in two articles with accompanying videos, will help other novice PRS competitors prepare for PRS-type matches and assemble the right equipment.
This video has cool Aerial Drone footage, and in-depth explanation of stages:
Gavin enjoyed his first match: “Overall, the match was more fun and more laid back than I thought it would be. The guys in our squad were all really helpful, and even loaned me gear to try out when they noticed my gear wasn’t right for a particular shooting activity. One such case was when Ken Gustafson (of KYL Gear) offered to loan me one of the bags he had made. Below you can see me shooting off the infamous unstable tippy tank trap with a KYL Gear bag, and I’ll have to say [the bag] was amazing. It helped me lock down my rifle and get on target. What a great feeling!”
Share the post "Sunday Gunday: AR-Platform Rifles for PRS Gas Gun Series"
Chalk up a legal victory for the gun industry. The U.S. District Court (Southern District of Ohio) has dismissed, with prejudice, the Primus Group v. Smith & Wesson, et al lawsuit. The decision was delivered October 9, eliminating the plaintiff’s claims against several prominent AR-15 firearms manufacturers, including Smith & Wesson, Remington Arms Company, SIG Sauer, Sturm, Ruger & Company, Colt Manufacturing, and Armalite.
“This decision by the federal judge to dismiss with prejudice this frivolous case is pleasing, if not unexpected,” said Lawrence G. Keane, NSSF Senior Vice President of Government Relations and Public Affairs and General Counsel. “These are lawful and federally-regulated AR-15 modern sporting rifle manufacturers that make semiautomatic rifles for lawful purposes. The judge was absolutely correct to assert that the proper venue to establish public firearms policy is through the legislature and not the courts.”
Primus Group, LLC, is a small entity in Columbus, Ohio with a vague business model. The limited liability company filed suit after the tragic murders in El Paso and Dayton, Ohio. They claimed racketeering, intentional misrepresentation claims, and “a clear and present danger” of all American lives due to “assault weapons”. The modern sporting rifles manufactured and sold by the companies named as defendants are semi-automatic rifles, meaning one round is fired for each trigger pull.
The court found the plaintiffs had no standing to bring the case against the defendants. This decision rightfully asserts that those who purposefully and criminally misuse firearms are the ones who are responsible for those crimes. It further affirms that activist lawsuits to prompt judicial action are not the proper avenue to establish policy.
Share the post "Federal District Court Dismisses Suit Against AR-15 Makers"
Walmart is yielding to anti-gun forces one step at a time. First the national retail chain stopped selling handguns in 1993. Next in 2015, Walmart stopped selling “black rifles” — AR-15 platform firearms. Then in 2018 Walmart raised the age for gun purchases from 18 to 21. And the latest restrictions involve ammunition. Walmart announced it would not longer sell ANY pistol ammunition. And Walmart now won’t sell .223 Rem (5.56×45) ammunition commonly used in ARs and “modern sporting rifles”. What comes next? If a criminal uses a shotgun in a multiple-death incident, will Walmart stop selling shotguns?
1993 — Walmart halts sales of all handguns.
2015 — Walmart halts sales of AR-15 type rifles.
2018 — Walmart raises minimum age for firearm purchase from 18 to 21 years.
2019 — Walmart halts sales of all pistol ammunition.
2019 — Walmart halts sales of all .223 Rem (5.56×45) ammunition.
Walmart has been steadily rolling back its support of the Second Amendment since 1993 when it stopped the sale of all handguns in every state except Alaska. Then, in 2015 it ended the sale of AR-15 style MSR rifles, and any toy or airgun resembling any “military-style rifle used in mass shootings”. Last year, Walmart raised the minimum age for gun purchases from 18 to 21, two weeks after the Parkland, Florida school shooting. And Walmart rolled out another set of restrictions after the recent shooting at a Walmart Super Center in El Paso, Texas.
“Walmart may not sell the ammo you need, and more companies beholden to the pressure of the vocal minority may follow suit. Effectively, Walmart has been bullied into kowtowing to the social justice warriors, and woke-ninjas in the vocal minority.” — Midsouth Blog
In a memo to employees, Walmart CEO, Doug McMillon, stated: “After selling through our current inventory commitments, we will discontinue sales of short-barrel rifle ammunition such as the .223 caliber and 5.56 caliber that, while commonly used in some hunting rifles, can also be used in large capacity clips on military-style weapons.”
Walmart has also stated that it will no longer sell handgun ammo. McMillon previously said Walmart was responsible for 2% of firearm sales in the U.S. and 20% of ammunition sales. Walmart expects its share of ammunition sales to drop to between 6% and 9% as a result of the newly-announced changes. The company will continue to sell shotguns and rifles [But for how long? — Editor].
“In a complex situation lacking a simple solution, we are trying to take constructive steps to reduce the risk that events like these will happen again,” McMillon said in a memo. “The status quo is unacceptable.” In this 2015 video, McMillon explained the decision to stop selling AR-platform rifles.
Changes to Walmart Gun Carry Policies
Another rider on the new Walmart policy affects customers who open-carry in their stores. If shoppers openly carry guns into Walmart stores going forward, store managers may ask the shopper to leave and safely secure their gun in their vehicle before returning to the store. “The policies will vary by location, however, and shoppers who are openly carrying guns may not always be asked to leave the store,” a Walmart spokesman said.
“As long as a Hornady is at Hornady, we will never sell direct to Walmart. They are no friend of the industry.” — Jason Hornady, 2007
Walmart CEO Calls for More Gun Control
“We encourage our nation’s leaders to move forward and strengthen background checks and to remove weapons from those who have been determined to pose an imminent danger,” McMillon said. “We do not sell military-style rifles, and we believe the re-authorization of the Assault Weapons Ban should be debated to determine its effectiveness.”
Commentary from Midsouth Shooters
Walmart may not sell the ammo you need, and more companies beholden to the pressure of the vocal minority may follow suit. Midsouth will continue to sell the ammunition and reloading supplies you need, regardless. Our Second Amendment right is a sacred right, and for you to protect your family with the tools available, you need access to fairly priced ammunition and firearms.
Midsouth Shooters was founded on the tenants of honesty, family, and fairness, rooted in American and God. For a company, or organization, to be swayed by knee-jerk reactions sets a precedent of allowing the mob to dictate overreaching policies which put many in harms way. Effectively, Walmart has been bullied into kowtowing to the social justice warriors, and woke-ninjas in the vocal minority.”
Share the post "Walmart Halts Sales of .223 Rem and Handgun Ammunition"
Many of our readers use AR-type rifles for Service Rifle matches, varmint hunting, 3-Gun competition, or defensive use. AR-platform rifles can be configured in a multitude of ways to suit the application. But if you plan to put together your own purpose-built AR rifle, how do you get started?
“This decision by the federal judge to dismiss with prejudice this frivolous case is pleasing, if not unexpected,” said Lawrence G. Keane, NSSF Senior Vice President of Government Relations and Public Affairs and General Counsel. “These are lawful and federally-regulated AR-15 modern sporting rifle manufacturers that make semiautomatic rifles for lawful purposes. The judge was absolutely correct to assert that the proper venue to establish public firearms policy is through the legislature and not the courts.”
