As an Amazon Associate, this site earns a commission from Amazon sales.











July 9th, 2021

100/200 Group Benchrest Rifles & Loads — The Winning Formula

IBS Group Benchrest Nationals Jeff Stover IBS

The Rifle for Short-Range Benchrest Competition

Hardware Choices: Actions, Stocks, Barrels, Optics and More
Tech Talk by Jeff Stover

This article was prepared by past IBS President Jeff Stover based on results from the 2019 IBS 100/200 Group Nationals held August 12-17, 2019 at the Holton Gun & Bow Club in western Michigan.

Let’s examine the Top Ten rifles from the 2019 IBS Group Nationals in the 10.5-lb Light Varmint Class. We’ll focus on the most popular rifle components — the choices for Actions, Stocks, Barrels, and Scopes.

IBS Group Benchrest Nationals Jeff Stover IBS

IBS short range 100/200 group benchrest
Hall of Famer Jeff Gaidos taking aim at the 2018 IBS Group Nationals. He has a low-profile carbon-fiber stock with a Leupold fixed-power scope.

For some years now, BAT has been the predominant action. This year BAT actions held nearly 100% of the Top Ten places in all the Bag Gun equipment lists. Bruce Thom’s Idaho-crafted actions, except for a couple stray actions in Heavy Bench, swept the top rankings.

IBS Group Benchrest Nationals Jeff Stover IBS

Next, look at barrels. Bartlein or Krieger seem to rule with upstate New York’s venerable Hart barrels as competitive. Shooters tend to go with winners, so Wayne Campbell and Jeff Peinhardt dominate as gunsmiths for the top benchrest shooters.

In stocks there seems to be variety, but there is some commonality. The Scoville and Scarbrough stocks, both Michigan-made, are laminated wood (balsa and other wood) with carbon fiber and wrapped in carbon fiber. The Scoville stock on my 10.5-lb rifle weighs 18 ounces but is full size with a nice long fore-end. Bob Scarbrough makes a very similar product. Both are winners — it’s a choice of Ferrari or Lamborghini. The Roy Hunter and Terry Leonard stocks among these top rifles take a different route to winner’s circle. Both are wood (cedar or other), but super high-tech as they are laminated with carbon fiber. They are beautiful to boot. High-magnification Leupold, March, and Nightforce scopes rule the roost among benchrest optics.

IBS Benchrest rifle stock tuner

IBS benchrest loading table powder

Bullets and Powder

Bullets are important. Really important. A hot bullet gives you “Teen Aggs” and lots of trophies. An average bullet does not. Most of these are 68 grain 6mm boattails. The Peinhardt (StaMoly Precision) bullet is well represented on this list, but some top shooters make their own as you can see. Bullet jackets are likely StaMoly or J4. For powder, nearly everyone shoots Vihtavouri N133 except a few guys running LT30/32 or surplus 8208.

Vihtavuori N 133 N133 powder reloading

IBS Benchrest wailing wall targets

Permalink - Articles, Competition, Gear Review No Comments »
June 6th, 2018

Cool Suhl — Rimfire Benchrest Rig with Home-Built Stock

Suhl 150 IR 50/50 cedar stock

Forum member Evan K. (aka “Katokoch”) has crafted a nice rimfire benchrest rig using a Suhl action fitted into a handsome home-built cedar and carbon fiber stock. This shows what a skilled hobbyist wood-worker can create in his garage. Evan tells us: “Here is my Suhl 150-1 with a factory 1:19″ twist barrel, Leupold 36X scope, Harrell tuner, and my handmade cedar/carbon fiber stock. I started working on the laminate blank a couple years ago and finally finished it earlier this year. I’ve been using it in my IR 50/50 matches this summer. I haven’t shot a 250 with it yet but I know the rifle is very capable — as usual, I am the weak link!”

Suhl 150 IR 50/50 cedar stock

We think Evan did a great job on his stock, though he has limited stock-building experience. Evan explained: “The stock is my first attempt at making a very lightweight laminate and also gluing both vertical and horizontal seams in a blank. The wood is Spanish and Red Cedar and I made the trigger guard and buttplate with carbon fiber too (great use for small scrap pieces). The finish is hand-rubbed spar urethane and the action is semi-glued-in with Devcon 10110 and stainless pillars.”

Suhl 150 IR 50/50 cedar stock

USRA-IR50/50 is a popular .22 rimfire benchrest discipline with three (3) classes: 13.5 lb., 10.5 lb., and 7.5 lb. (Sporter). The matches are shot at 50 yards and 50 meters.

Permalink Competition, Gear Review, Gunsmithing 1 Comment »
October 8th, 2017

F-TR Glamour Gun — Canadian Carbon-Wrapped Stunner

Star Shooter F-TR Carbon Stock Rifle Bipod
Click Image for Large-Screen Version

Here is some serious Sunday “gun glamour” from the folks at Star Shooter Precision, a bipod-builder and stock-maker based in Montreal, Canada. This stunning .308 Win F-TR rifle features a carbon-wrapped Star Shooter stock, angle-adjustable tubular bag-rider, star-shaped escutcheons, and a Kelbly Panda action. Up front is Star Shooter’s signature lightweight bipod.

Click Each Image for Large, Full-Screen Version

Star Shooter F-TR Carbon Stock Rifle Bipod

Star Shooter F-TR Carbon Stock Rifle Bipod

Star Shooter F-TR Carbon Stock Rifle Bipod

Star Shooter F-TR Carbon Stock Rifle Bipod


Star Shooter Montreal Canada Quebec BipodAbout the Rifle Builders
Star Shooter Precision is a company located on the south shore of Montreal, Quebec, Canada. Fred Harvey is the designer. Fred says: “Our goal is to perfect the art of competition shooting the best we can with our custom bipods. The Star Shooter bipod is designed for shooters in F-Class competition, varmint hunting, load testing, tactical shooting and sighting in rifles.”

Star Shooter Montreal Canada Quebec Bipod

Permalink Competition, Gunsmithing 1 Comment »