Do you own an RCBS electronic powder dispenser? If you do, take the time to watch this ChargeMaster Tuning video from 8541 Tactical. This nine-minute video demonstrates how to re-program your Chargemaster to “tune” the dispensing process. The video shows the exact programming procedures to follow, step-by-step. Some folks want a faster powder flow — others tune their machines for a more reliable drop (with fewer over-runs). One cheap and popular modification is to insert a 1″-long section of a McDonald’s straw in the ChargeMaster’s silver dispensing tube. This works surprisingly well to smooth kernel drop and prevent “clumping” that can cause an over-charge. The McDonald’s straw MOD is demonstrated in this video, starting at the 6:22 mark.
Large-Diameter Dispensing Tube Mod
Many folks have had success with the McDonald’s straw modification demonstrated in the above video. However, some folks would like to get even better flow performance (with virtually no clumping). Forum Member Frank B. has come up with a new option using a brass hose fitting with a large outside diameter. The hose fitting (with tape wrapped around the barbed nose section) is placed inside the RCBS dispensing tube (be sure to have some kind of wrap — you don’t want metal-on-metal). Here’s how the unit looks installed:
Frank tells us: “I have found a cure for the over-throw problem. It is a simple 1/4″ barbed hose nipple. I wrapped a couple layers of tape around the barbed end for a snug fit. With this in place, I have thrown 100+ charges of Varget without a single overthrow. The ID of the barbed end needs to be approximately 3/16″ to feed a steady flow. This works because of the larger ID at the drop.”
Frank adds: “You can see in the photo that the powder is not stacking up. You can watch it drop one grain at a time. Hope this will take the aggravation out of your case charging.” For best performance with this brass fitting MOD, we recommend de-burring and smoothing out the front edge of the brass fitting over which the kernels drop.
Brass fitting mod suggested by Boyd Allen. We welcome reader submissions.
Share the post "Tune and Tweak Your ChargeMaster for Better Performance"
At the request of our readers, we have launched a new “Deals of the Week” feature. If this proves popular, we’ll try to run this every Monday. Here are some of the best deals on hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Sportsmans Superstore — .30-06 Ruger American Rifle, $299.99
Want a quality deer rifle for under three hundred bucks? Look no further. Here’s an awesome deal for the hunting season. This long-action .30-06 Ruger American Rifle costs just $299.99 this week. If you prefer a short action, Sportsmans Outdoors Superstore has the same rifle in .308 Win for $319.41 (camo stock) or $339.88 (black stock).
2. Bruno Shooters Supply — Leupold Competition Scopes $999.99
Here’s a good deal for benchrest shooters. Bruno’s is offering Leupold 35X and 40X Competition Series scopes for $999.99. That’s $100.00 less than we’ve seen anywhere else currently. And, for a limited time, Bruno’s is offering free shipping on Leupold scopes. Other Leupold scopes are 5% off regular prices while this sale is in effect.
3. Burris – $100 Off Burris Eliminator III LaserScope
Now through December 31st (2015), you can get $100 back on any Eliminator III with a mail-in rebate. The Burris Eliminator III combines a medium-powder zoom scope with a built-in laser rangefinder. We’ve used an Eliminator and it ranged successfully on steel plates out to 600 yards. We think this is a good product for a varmint hunter — it quickly returns yardages and shows the correct hold-over with an illuminated dot. Just put the dot on the target and “send it”. CLICK HERE for Rebate FORM.
4. Cabelas — FREE Shipping on orders of $99 or more
For the next two days, through midnight on 11/3/2015, Cabela’s is offering FREE Shipping on orders of $99.00 or more. Yes this applies to ammo sales as well (though not to firearms or hazmat items). To qualify, use code “115HOT” during checkout. NOTE: Shipping charges may apply to large or heavy items. Act quickly, this offer expires soon.
5. Midsouth Shooters Supply — Hornady Progressive Press on Sale
The Hornady Lock-N-Load AP Progessive Press is on sale at Midsouth this week for $389.99. That’s $70.00 off the regular price. To further sweeten this deal, press purchasers can get 500 free bullets through Hornady’s “Get Loaded” promotion. We have used this press. It is strong and reliable. We favor Hornady’s easy-to-adjust, rotary-type powder measure over Dillon’s sliding-bar system.
Like the RCBS ChargeMaster, this Lyman Gen6 Powder System will automatically dispense and weigh powder charges. This unit features a touch screen, rapid warm-up, anti-static/anti-drift technology, and electronic shielding to resist interference from other electronic devices. It’s a good deal at $202.49.
7. Amazon.com — Lee Universal Shell Holder Set
Every hand-loader needs one of these Lee Universal Shell Holder Sets. The kit contains 11 shell-holders for most popular rifle and pistol cartridge types. This editor bought one of these kits 25 years ago, and I still use it every week. Even if you prefer more expensive Redding shell-holders, this 11-piece kit serves as a valuable back-up. Right now the Shell Holder Set is on sale at Amazon.com for $26.99, with free shipping on orders over $35.00. Get two kits and they’ll ship for free.
Share the post "Bargain Finder 7: AccurateShooter’s Deals of the Week"
Here’s a clever, easy modification for your RCBS ChargeMaster electronic powder dispenser. Many folks use a McDonald’s straw to smooth kernel flow out of the dispensing tube. Forum member Mike S. (aka in2deep) found that, even with a straw in place, he sometimes got clumps, which dropped 5-6 kernels at once, throwing off his dispensed weight.
Mike looked at the situation and ingeniously decided to trim the straw into little v-shaped arms or prongs. This helps to break up the clumps, so the kernels flow out the end of the tube more consistently during the dispense cycle. Mike writes:
Soda Straw Modification
This is a further tweak of the popular soda straw modification as the original mod would still allow Varget powder to collect in the straw and dump sometimes as many as 6 or 8 or even more extra kernels in the pan. It would sometimes signal an overcharge, but even when it didn’t there could be as many as 6+ kernels too high or too low (total spread of 12+).
The little arms (prongs) on the straw tend to separate the kernels into groups of 1 or 2 or 3 and prevents piling and many times the throw is now within 1 or 2 kernels of the desired weight.
Straw Cutting Tips — Mike found the shape/angle of the “arms” is very important. If the cuts are too fine or too course it allows the kernels to collect almost like before but the illustrated angle seems to allow an average of only 2 or 3 kernels per trickle input from the machine. This means that more charges are much closer to the actual desired weight and max kernel variances will be cut in less than half and there will be almost no overthrows.
Credit Boyd Allen for sourcing this tip.
Share the post "Bench Hacks 101: Modified Straw Trick for ChargeMasters"
While many folks enjoy the convenience of an electronic powder scale/dispenser such as the RCBS Chargemaster, some hand-loaders still prefer to use a traditional balance beam. Balance beam scales are simple, compact, and don’t suffer from electronic “glitches”. Morever, even if you use a digital dispenser at home, when you’re doing load development at the range, a balance-beam scale may be more convenient. A scale doesn’t require electrical power, so you don’t need to bring battery packs or string long power cables. Just bring some kind of box to shelter your beam scale from the wind.
While designs like the RCBS 10-10 are decent performers as built, they can be made much more precise (and repeatable), by “tuning” of key parts. Forum member Scott Parker optimizes a variety of popular beam scales, including the Ohaus 10-10 (USA-made model), RCBS 10-10 (USA-made model), RCBS 5-10, Lyman M5, Lyman D5, and others. You send Scott your scale, he tunes the key components, tests for precision and repeatability, and ships it back to you. The price is very affordable ($65.00 including shipping in USA).
Scott tells us: “I have tuned several 10-10s. They all have turned out very sensitive, consistent and hold linearity like a dream. If only they came that way from the factory. The sensitivity after tuning is such that one kernel of powder registers a poise beam deflection. For repeatability, I remove the pan and replace it for the zero 10 times. The zero line and the poise beam balance line must coincide for each of those 10 tries. I then set the poises to read 250.0 grains. I remove and replace the pan 10 times with the calibration weight. For linearity, the poise beam balance line and the zero line should coincide within the line width. This is roughly one half a kernel of powder. For repeatability, the poise beam balance line must return to that same balance point ten times. I then adjust the poises back to zero and recheck the zero. I have a master’s degree in chemistry, thus I am very familiar with laboratory balances. Email me at vld223 [at] yahoo.com or give me a call at (661) 364-1199.”
The video above, created by British shooter Mark (aka 1967spud), shows a 10-10 beam scale that has been “tuned” by Scott Parker. In the video, you can see that the 10-10 scale is now sensitive to one (1) kernel of powder. Mark also demonstrates the’s scale’s repeatability by lifting and replacing a pan multiple times. You can contact Mark via his website, www.1967spud.com. To enquire about balance-beam scale tuning, call Scott Parker at (661) 364-1199, or send email to: vld223 [at] Yahoo.com.
Video tip from Boyd Allen. We welcome reader submissions.
Share the post "Tuning Balance Beam Scales for Precision and Repeatability"
Bullets.com has launched a huge closeout on its entire RCBS inventory. Here’s a great opportunity to save big bucks on high-quality RCBS tools and reloading accessories, including RCBS Chargemasters and even RCBS Rockchucker presses. The folks at Bullets.com report: “We have slashed prices to levels at or below cost on hundreds of items.” Guys — take note: this is a unique opportunity to pick up some great gear at truly rock-bottom prices. In fact the deals are so good that your Editor plans to purchase a couple presses, a powder measure stand, and some accessories for my RCBS 2000 progressive press. I really don’t think you can beat these prices… and remember this is an inventory close-out sale, limited to stock on hand. When it’s gone, it’s gone. So don’t say we didn’t warn you!
Closeout items include: Reloading Presses
Electronic Powder Measures
Reloading Kits
Digital and Beam Scales
Tumblers
Ultrasonic Cleaners
Sizing and Seating Dies
Shell Holders
Bullet Casting Kits
Case Prep Tools and much more.
Here Are Some of the RCBS Presses on Sale:
Get RCBS Factory Rebates
In connection with this Bullets.com SALE, you can save even more with RCBS factory rebates. If you spend $50.00 you can get a $10.00 rebate. If you spend at least $300.00 on RCBS products you can save $50.00. These rebates are good through 12/31/2014. CLICK HERE for details.
Click for Detals
Share the post "Huge Inventory Reduction Sale of RCBS Products at Bullets.com"
If you own an RCBS ChargeMaster 1500 electronic powder scale/dispenser, or are thinking about purchasing one, here are a few tips that can cut your loading times and eliminate some petty annoyances.
Mute That Annoying Beep
Some ChargeMaster users complain about the loud beep at the end of each cycle. There’s a simple way to silence the beep — and you don’t have to cut any wires or permanently disable the speaker. To mute the beep, simply hold down the Zero button until “beep off” displays. Repeat this procedure to restore the beep function.
Activating the Auto-Dispense Mode
You can set the ChargeMaster to automatically dispense your pre-programmed charge as soon as you put the pan back on the scale. Simply press and hold the “Enter” button. The code “Auto” should then appear on the display. At this point, push “Disp” to dispense the first charge. When you replace the pan, the unit will automatically dispense the same charge. For some people this is an added convenience. You can always go back to the default manual dispense method by changing the dispense mode using the “Enter” button again.
Use a McDonald’s Straw to Reduce Over-Throws
Jaco Brink provided another useful tip to avoid “over-throws” (excess charge weight): “The RCBS employee advised me to take a McDonald’s straw (because it is thicker than a normal straw), cut off about a half inch piece and put it into the tube where the powder exits. This caused the last part of an extruded powder to cluster less, and reduced the amount of overthrows dramatically.”
Instructional Video
The video below shows how to set up and calibrate a Chargemaster 1500. Be sure to level the unit carefully, both left to right and front to back. Starting at the 1:44 mark in the video you can see the unit dispense a 50-grain charge in 30 seconds. The slow, final trickle stage takes about half of the total time.
How to Shorten Dispensing Times
The last tip is for advanced users only. You can alter the programming settings to speed up powder dispensing dramatically. One user reported that, by re-programming his machine, his cut his dispensing time for a 30-grain load from 22 to 13 seconds “with no overthrows”. WARNING: once you change the parameters, there is no “restore” command to set everything back to the defaults. So proceed carefully. The speed enhancement procedure is described on the pages linked below:
Polish off your credit cards boys and girls, the big Brownells Black Friday Sale begins at 12:01 am on Thanksgiving Day, November 28, 2013. You’ll find great bargains on gun parts and accessories, as well as reloading gear and gunsmithing tools. (Brownells is the world’s largest supplier of gun accessories and gunsmithing tools) The special sale prices start on November 28th and continue through the weekend — you have until 11:59 pm CST on December 2, 2013 to grab these Brownells bargains.
Here Are Some Currently-Featured Sale Items at Brownells.
Prices May Go Even Lower When the Sale Commences Tomorrow:
Share the post "Brownells Black Friday Sale Kicks Off Tomorrow (Thanksgiving)"
If you own an RCBS ChargeMaster 1500 electronic powder scale/dispenser, or are thinking about purchasing one, here are a few tips that can cut your loading times and eliminate some petty annoyances.
Mute That Annoying Beep
Some ChargeMaster users complain about the loud beep at the end of each cycle. There’s a simple way to silence the beep — and you don’t have to cut any wires or permanently disable the speaker. To mute the beep, simply hold down the Zero button until “beep off” displays. Repeat this procedure to restore the beep function.
Activating the Auto-Dispense Mode
You can set the ChargeMaster to automatically dispense your pre-programmed charge as soon as you put the pan back on the scale. Simply press and hold the “Enter” button. The code “Auto” should then appear on the display. At this point, push “Disp” to dispense the first charge. When you replace the pan, the unit will automatically dispense the same charge. For some people this is an added convenience. You can always go back to the default manual dispense method by changing the dispense mode using the “Enter” button again.
Use a McDonald’s Straw to Reduce Over-Throws
Jaco Brink provided another useful tip to avoid “over-throws” (excess charge weight): “The RCBS employee advised me to take a McDonnell’s straw (because it is thicker than a normal straw), cut off about a half inch piece and put it into the tube where the powder exits. This caused the last part of an extruded powder to cluster less, and reduced the amount of overthrows dramatically.”
Instructional Video
The video below shows how to set up and calibrate a Chargemaster 1500. Be sure to level the unit carefully, both left to right and front to back. Starting at the 1:44 mark in the video you can see the unit dispense a 50-grain charge in 30 seconds. The slow, final trickle stage takes about half of the total time.
How to Shorten Dispensing Times
The last tip is for advanced users only. You can alter the programming settings to speed up powder dispensing dramatically. One user reported that, by re-programming his machine, his cut his dispensing time for a 30-grain load from 22 to 13 seconds “with no overthrows”. WARNING: once you change the parameters, there is no “restore” command to set everything back to the defaults. So proceed carefully. The speed enhancement procedure is described on the pages linked below:
The Hornady Lock N Load AutoCharge Electronic Scale/Dispenser is now on sale for under $200.00. Grafs.com has the Hornady AutoCharge for $194.99 (with $5.95 flat sh/h) and Amazon.com offers the AutoCharge for $195.00 with FREE ‘Super-Saver’ shipping. If you are looking for an affordable combination digital scale and powder dispenser, this is very attractive pricing. By comparison, the RCBS ChargeMaster is currently on sale for $299.99 at Sinclair International. So you can save at least $105.00 by buying RED instead of GREEN.
While we have a lot of positive experience with the RCBS Chargemaster, we haven’t done any long-term testing of the Hornady AutoCharge. However, user reviews have generally been positive. We suggest you do your own research and then make your own decision. Both the Hornady LnL AutoCharge and RCBS ChargeMaster offer load precision to ±0.1 grains. Both the Hornady Autocharge and the RCBS ChargeMaster are sold with a one-year manufacturers warranty.
Features and Specifications:
Scale capacity of 1000 grains
Easy-to-operate keypad
Large backlit display
Automatic and manual dispense options
Trickle function
Three speed settings
Easy Outflow Powder Drain
Overcharge protection
One-year manufactuer’s warranty
This Youtube video shows the Hornady Lock-N-Load AutoCharge in action.
If you want to learn more about the Hornady AutoCharge, there is a detailed review in Shooting.com.au, a popular Aussie gun forum. This product review features actual test results along with lots of sharp, jumbo-sized photos. Here is the summary of the reviewer’s test results: “Weighing [20 charges of a stick powder] on a Redding beam scale (the only other scale I have) showed that 12 were spot on and the remainder we fairly equally split between 0.1 grain under and 0.1 grain over according to this scale. I consider this to be more than adequate for me.”
The RCBS ChargeMaster Combo Electronic Scale/Dispenser is very popular with reloaders. The units we use have dispensed loads faithfully (and accurately) for many seasons. We rarely, if ever, mess around with manual powder measures anymore. If you haven’t bought a ChargeMaster yet because the price (typically about $349.00) has been out of reach, now you’re in luck. Midsouth Shooters Supply has discounted the ChargeMaster to exactly $300.00. That qualifies for a $50 off rebate from RCBS. When you figure in the $50 Manufacturer’s Rebate, your final price (not including shipping) is just $250.00. That’s a good deal. But just to be clear — you still have to pay shipping!
How to Claim Your $50.00 Mail-In Rebate
You can get $50.00 cash back from RCBS. You need to have purchased at least $300.00 in 2012 RCBS “Product” to qualify for the RCBS $50.00 mail-in rebate. With the rebate you get $50.00 back directly from RCBS. This lowers the effective price of a new ChargeMaster to $250.00 (before shipping and after rebate). Purchases must be made between 1/1/2012 and 12/31/2012 and the rebate form and supporting materials must be received no later than 1/31/2013.
Share the post "How to Get an RCBS ChargeMaster for $250.00 (After Rebate)"
Hey folks, here’s a very good deal if you want a combo electronic powder dispenser/scale. The Hornady Lock-N-Load AutoCharge typically retails for around $240 (currently it’s $229.99 at Cabelas and $249.99 at MidwayUSA). Right now, ManVentureOutpost.com has the AutoCharge for just $186.01 (plus shipping). That’s over $50 off typical retail. NOTE: You MUST use Coupon Code SPR2012 during checkout to get that $186.01 price. Act quickly — supplies are limited at that price.
3/5/2012 UPDATE — ManVentureOutpost.com Sold Out of this item, which is now back-ordered. ManVenture is still (apparently) honoring the $186.01 price (with SPR2012 Coupon Code).
Hornady AutoCharge Is Much Less Expensive than RCBS ChargeMaster
That price for the Hornady unit is about $155.00 less than typical pricing for the RCBS Chargemaster (Sinclair sells the Chargemaster for $340.99 plus shipping). For most tasks the Hornady performs quite well. However, RCBS ChargeMaster fans will be quick to note that there has been more accumulated knowledge on tweaking the RCBS machine. But if you want a bargain, consider the “red option” — the Hornady AutoCharge.
This Youtube video shows the Hornady Lock-N-Load AutoCharge in action.
If you want to learn more about the Hornady AutoCharge, there is a detailed review in Shooting.com.au, a popular Aussie gun forum. This product review features actual test results along with lots of sharp, jumbo-sized photos. Here is the summary of the reviewer’s test results: “Weighing [20 charges of a stick powder] on a Redding beam scale (the only other scale I have) showed that 12 were spot on and the remainder we fairly equally split between 0.1 grain under and 0.1 grain over according to this scale. I consider this to be more than adequate for me.”
RCBS Chargemaster 1500 Electronic Powder Dispensers are normally quite accurate. However, build-up of static electricity can cause some issues, such as kernels of powder clumping together. Nat Lambert found that reducing static charges can “cure” the clumping problem: “Discharge the static in your machine and you won’t have those clumps. Either use static wipes inside and out on your machine or use a Zerostat. It will make a huge diference. Walmart has the anti-static wipes in the computer section.”
Forum member J. Cummings reports: “My Chargemaster drifted due to static electricity after a thunderstorm. I contacted RCBS. They told me to turn it off, wipe it down with an anti-static cloth then try it. That was more than six months ago. It has worked fine ever since.” Forum member Harvey concurs: “As long as I use the static dryer sheets my Chargemaster VERY RARELY will drift. [If it drifts now] it’s usually me breathing hard or moving things like seating bullets or bumping the bench with my knees. I had problems until I used the sheets and ran pieces thru the tube on a pipe cleaner.”
Others have found that they can reduce the clumping problem by prepping the inside of the dispensing tube, by removing burrs and rough spots. Milanuk has a very simple solution: “Stick a one-inch piece of drinking straw in the discharge tube; tape it in place. Clumping problem solved.” Below is a commercial anti-static cloth. You can also use the “anti-cling” fabric pieces used with clothes dryers.
Share the post "Eliminate Static for Better RCBS ChargeMaster Performance"
Here’s a clever, easy modification for your RCBS ChargeMaster electronic powder dispenser. Many folks use a McDonald’s straw to smooth kernel flow out of the dispensing tube. Forum member Mike S. (aka in2deep) found that, even with a straw in place, he sometimes got clumps, which dropped 5-6 kernels at once, throwing off his dispensed weight.
If you own an RCBS ChargeMaster 1500 electronic powder scale/dispenser, or are thinking about purchasing one, here are a few tips that can cut your loading times and eliminate some petty annoyances.
The Hornady Lock N Load AutoCharge Electronic Scale/Dispenser is now on sale for under $200.00. 
RCBS Chargemaster 1500 Electronic Powder Dispensers are normally quite accurate. However, build-up of static electricity can cause some issues, such as kernels of powder clumping together. Nat Lambert found that reducing static charges can “cure” the clumping problem: “Discharge the static in your machine and you won’t have those clumps. Either use static wipes inside and out on your machine or use a Zerostat. It will make a huge diference. Walmart has the anti-static wipes in the computer section.” 
