Over the past 12 months, this article was one of the TOP 20 most-read Daily Bulletin features. We’re reprising it today for those who may have missed it the first time. The above diagram comes from a TiborasurasRex YouTube Video comparing G1 and G7 BC models. CLICK HERE to watch the video.
The better, up-to-date ballistics programs let you select either G1 or G7 Ballistic Coefficient (BC) values when calculating a trajectory. The ballistic coefficient (BC) of a body is a measure of its ability to overcome air resistance in flight. You’ve probably seen that G7 values are numerically lower than G1 values for the same bullet (typically). But that doesn’t mean you should select a G1 value simply because it is higher.
Some readers are not quite sure about the difference between G1 and G7 models. One forum member wrote us: “I went on the JBM Ballistics website to use the web-based Trajectory Calculator and when I got to the part that gives you a choice to choose between G1 and G7 BC, I was stumped. What determines how, or which one to use?”
The simple answer is the G1 value normally works better for shorter flat-based bullets, while the G7 value should work better for longer, boat-tailed bullets.
G1 vs. G7 Ballistic Coefficients — Which Is Right for You?
G1 and G7 refer both refer to aerodynamic drag models based on particular “standard projectile” shapes. The G1 shape looks like a flat-based bullet. The G7 shape is quite different, and better approximates the geometry of a modern long-range bullet. So, when choosing your drag model, G1 is preferable for flat-based bullets, while G7 is ordinarily a “better fit” for longer, boat-tailed bullets.
Drag Models — G7 is better than G1 for Long-Range Bullets
Many ballistics programs still offer only the default G1 drag model. Bryan Litz, author of Applied Ballistics for Long Range Shooting, believes the G7 standard is preferrable for long-range, low-drag bullets: “Part of the reason there is so much ‘slop’ in advertised BCs is because they’re referenced to the G1 standard which is very speed sensitive. The G7 standard is more appropriate for long range bullets. Here’s the results of my testing on two low-drag, long-range boat-tail bullets, so you can see how the G1 and G7 Ballistic coefficients compare:
G1 BCs, averaged between 1500 fps and 3000 fps:
Berger 180 VLD: 0.659 lb/in²
JLK 180: 0.645 lb/in²
The reason the BC for the JLK is less is mostly because the meplat was significantly larger on the particular lot that I tested (0.075″ vs 0.059″; see attached drawings).
For bullets like these, it’s much better to use the G7 standard. The following BCs are referenced to the G7 standard, and are constant for all speeds.
Many modern ballistics programs, including the free online JBM Ballistics Program, are able to use BCs referenced to G7 standards. When available, these BCs are more appropriate for long range bullets, according to Bryan.
[Editor’s NOTE: BCs are normally reported simply as an 0.XXX number. The lb/in² tag applies to all BCs, but is commonly left off for simplicity.]
This article is copyright 2023 AccurateShooter.com. No 3rd Party republication of this article is allowed without advance approval and payment of licensing fees.
Share the post "G1 vs. G7 Ballistic Coefficients — What You Need to Know"
Over the past 12 months, this article was one of the TOP TEN most-read Daily Bulletin features. We’re reprising it today for those who may have missed it the first time. The above diagram comes from a TiborasurasRex YouTube Video comparing G1 and G7 BC models. CLICK HERE to watch the video.
The better, up-to-date ballistics programs let you select either G1 or G7 Ballistic Coefficient (BC) values when calculating a trajectory. The ballistic coefficient (BC) of a body is a measure of its ability to overcome air resistance in flight. You’ve probably seen that G7 values are numerically lower than G1 values for the same bullet (typically). But that doesn’t mean you should select a G1 value simply because it is higher.
Some readers are not quite sure about the difference between G1 and G7 models. One forum member wrote us: “I went on the JBM Ballistics website to use the web-based Trajectory Calculator and when I got to the part that gives you a choice to choose between G1 and G7 BC, I was stumped. What determines how, or which one to use?”
The simple answer is the G1 value normally works better for shorter flat-based bullets, while the G7 value should work better for longer, boat-tailed bullets.
G1 vs. G7 Ballistic Coefficients — Which Is Right for You?
G1 and G7 refer both refer to aerodynamic drag models based on particular “standard projectile” shapes. The G1 shape looks like a flat-based bullet. The G7 shape is quite different, and better approximates the geometry of a modern long-range bullet. So, when choosing your drag model, G1 is preferable for flat-based bullets, while G7 is ordinarily a “better fit” for longer, boat-tailed bullets.
Drag Models — G7 is better than G1 for Long-Range Bullets
Many ballistics programs still offer only the default G1 drag model. Bryan Litz, author of Applied Ballistics for Long Range Shooting, believes the G7 standard is preferable for long-range, low-drag bullets: “Part of the reason there is so much ‘slop’ in advertised BCs is because they’re referenced to the G1 standard which is very speed sensitive. The G7 standard is more appropriate for long range bullets. Here’s the results of my testing on two low-drag, long-range boat-tail bullets, so you can see how the G1 and G7 Ballistic coefficients compare:
G1 BCs, averaged between 1500 fps and 3000 fps:
Berger 180 VLD: 0.659 lb/in²
JLK 180: 0.645 lb/in²
The reason the BC for the JLK is less is mostly because the meplat was significantly larger on the particular lot that I tested (0.075″ vs 0.059″; see attached drawings).
For bullets like these, it’s much better to use the G7 standard. The following BCs are referenced to the G7 standard, and are constant for all speeds.
Many modern ballistics programs, including the free online JBM Ballistics Program, are able to use BCs referenced to G7 standards. When available, these BCs are more appropriate for long range bullets, according to Bryan.
[Editor’s NOTE: BCs are normally reported simply as an 0.XXX number. The lb/in² tag applies to all BCs, but is commonly left off for simplicity.]
Share the post "G1 vs. G7 Ballistic Coefficient Models — What You Need to Know"
Over the past 12 months, this article was one of the TOP TEN most-read Daily Bulletin features. We’re reprising it today for those who may have missed it the first time. The above diagram comes from a TiborasurasRex YouTube Video comparing G1 and G7 BC models. CLICK HERE to watch the video.
The better, up-to-date ballistics programs let you select either G1 or G7 Ballistic Coefficient (BC) values when calculating a trajectory. The ballistic coefficient (BC) of a body is a measure of its ability to overcome air resistance in flight. You’ve probably seen that G7 values are numerically lower than G1 values for the same bullet (typically). But that doesn’t mean you should select a G1 value simply because it is higher.
Some readers are not quite sure about the difference between G1 and G7 models. One forum member wrote us: “I went on the JBM Ballistics website to use the web-based Trajectory Calculator and when I got to the part that gives you a choice to choose between G1 and G7 BC, I was stumped. What determines how, or which one to use?”
The simple answer is the G1 value normally works better for shorter flat-based bullets, while the G7 value should work better for longer, boat-tailed bullets.
G1 vs. G7 Ballistic Coefficients — Which Is Right for You?
G1 and G7 refer both refer to aerodynamic drag models based on particular “standard projectile” shapes. The G1 shape looks like a flat-based bullet. The G7 shape is quite different, and better approximates the geometry of a modern long-range bullet. So, when choosing your drag model, G1 is preferrable for flat-based bullets, while G7 is ordinarily a “better fit” for longer, boat-tailed bullets.
Drag Models — G7 is better than G1 for Long-Range Bullets
Many ballistics programs still offer only the default G1 drag model. Bryan Litz, author of Applied Ballistics for Long Range Shooting, believes the G7 standard is preferrable for long-range, low-drag bullets: “Part of the reason there is so much ‘slop’ in advertised BCs is because they’re referenced to the G1 standard which is very speed sensitive. The G7 standard is more appropriate for long range bullets. Here’s the results of my testing on two low-drag, long-range boat-tail bullets, so you can see how the G1 and G7 Ballistic coefficients compare:
G1 BCs, averaged between 1500 fps and 3000 fps:
Berger 180 VLD: 0.659 lb/in²
JLK 180: 0.645 lb/in²
The reason the BC for the JLK is less is mostly because the meplat was significantly larger on the particular lot that I tested (0.075″ vs 0.059″; see attached drawings).
For bullets like these, it’s much better to use the G7 standard. The following BCs are referenced to the G7 standard, and are constant for all speeds.
Many modern ballistics programs, including the free online JBM Ballistics Program, are able to use BCs referenced to G7 standards. When available, these BCs are more appropriate for long range bullets, according to Bryan.
[Editor’s NOTE: BCs are normally reported simply as an 0.XXX number. The lb/in² tag applies to all BCs, but is commonly left off for simplicity.]
Share the post "G1 vs. G7 Ballistic Coefficient Models — What You Need to Know"
Lapua offers a sophisticated FREE Ballistics App for iOS and Android smartphones and mobile devices. This state-of-the-art App has many great features — much more than you’d expect for a free App. If you do much shooting past 300 yards, or use a wide variety of bullets and/or cartridge types, we recommend you download the App and give it a try. This article, written by a Lapua technician, explains how to use the App. This article is definitely worth reading — there are many important concepts and procedures discussed here that apply to all Ballistics calculators, not just the Lapua App. For more details, read the Lapua Ballistics App User Manual.
Article by Matti Paananen
As smartphones and tablets are constantly developed, ballistic software and Apps are also improving, and with their help our ability to hit targets can improve significantly. This is a short introduction on why and how to use a ballistic calculator, namely the Lapua Ballistics App, and a few pointers that will help you use the App effectively.
Ballistics software and Apps are designed to help shooters and hunters make calculations to hit distant targets or take down game in the field by offering ballistic solutions. Lapua Ballistics is the first App utilizing the 6DOF calculation model.
Toying around with ballistics apps is always fun, but effective use of ballistic software requires general understanding of how they work. The App gets information from the user and by using mathematical formulas it provides the solution that will give the user a solid starting point to hit the target.
However, it is also important to remember that the App can’t think — it only calculates a solution based on your parameters. You will not know the error until you have already fired the shot.
1. SET UP YOUR SCOPE RETICLE AND RIFLE
Scope manufactures use different units per click, so it’s important that you use the correct unit in the App. For example, in your scope, one click can be 0.1 mil, 1/4 MOA, [or 1/8 MOA depending on the model]. You can find this information in your scope manual and also usually from the scope turrets. Setting your scope reticle is very important, partly because if you use the wrong unit in the App, the ballistic solution will not match your scope. To set up your scope reticle in Lapua Ballistics, go to Manage Rifle / Cartridge Data –> Add Rifle Cartridge Data (or choose to edit a Rifle/Cartridge combo you’ve already set up) –> Reticle –>.
Another thing to setup in Lapua Ballistics is your scope height, i.e. Line of Sight to Bore in the Manage Rifle / Cartridge Data window. This is the distance between the center of the scope and the center of the bore. The default height is 45mm but with tactical rifles, the height can be even 70mm. So check! The height is easy to measure with a ruler. Then there’s also the twist rate of your rifle to set up — look it up in the rifle manual, it can also be stamped on the rifle barrel. The rifle twist rate is needed to calculate spin drift and bullet stability. Spin drift should be taken into account with longer distances, and it can be enabled or disabled in Lapua Ballistics.
2. SET UP YOUR BULLET CHOICE
You can add your bullet of choice from the bullet library, where you find all Lapua bullets. It is also possible to add information manually. In this case, you will need bullet weight, the ballistic coefficient BC and muzzle velocity. The Ballistic coefficient can be given in G1 or G7 values. G7 is designed for low-drag bullets with a boat tail and G1 is used for more traditional flat base bullets. Lapua on the other hand uses Doppler radar-based data to calculate a more accurate ballistic trajectory for Lapua bullets by 6DOF model. Anyway, it is good to remember that the ballistic coefficient changes with velocity, so all changes in a flight path cannot be predicted.
The following thing you will need to set up is the bullet’s actual muzzle velocity. You can reverse engineer the number based on your drop or by using a chronograph. It is good to remember that more rounds you shoot, the better average velocity you will get.
Because temperature affects muzzle velocity, it would be good to shoot velocities in different temperatures and write them down. Those notes can be used with Lapua Ballistics as it is possible to set up the powder temperature variation in the App.
3. SET UP WEATHER CONDITIONS
Lapua Ballistics has settings for temperature, air pressure, and humidity. All these affect the ballistic solution and the chance to hit the target. In a nutshell, temperature affects the powder’s burn speed and in that way the bullet velocity. Air pressure and humidity also affect bullet drag.
If you are shooting approximately on sea level, you do not need to change air pressure values, but if you are shooting or hunting in mountain areas or where there is lot of elevation difference, you might want to check the air pressure. On sea level, the atmospheric pressure is 1013 hPa. The higher you go, the less air pressure you will have and thus less bullet drag. Some like to use handheld weather and wind meters that have a function to get actual air pressure and humidity, however the Get Current Weather function in Lapua Ballistics will give you the air pressure reading from your local and most close weather station, provided that your app is allowed to use your location data.
Temperature is an important variable. To understand how velocity change in different temperatures, only way is to shoot and keep notes. Some ballistic software and apps have values for muzzle velocity in different temperatures. The user needs to input muzzle velocity in different temperatures in order to software to calculate the effect. More velocities in different temperatures the user adds, the more accurate the calculation will be.
4. SET UP A BALLISTIC SOLUTION
After we have set up our own rifle / cartridge data, there are few things that need to be taken into account when shooting: the distance to the target, the wind and our shooting skills. Distance can be measured for example with a laser rangefinder and then put in. Wind can also be measured with a wind gauge but it is important to remember that the wind in the target area can be very different from that in the shooting position. Lapua Ballistics gives a ballistic solution based on stationary wind, so in the end, the shooter’s task is to estimate how much the wind factor will be.
It’s good to remember that Lapua Ballistics is a starting point and designed to assist the shooter. Software and apps have ways of helping us adjust the sight and predict the ballistic solution but they will not replace the shooter. We still have to pull the trigger and record our range data. By keeping good range notes and with the support of good ballistic software like Lapua Ballistics, we should be able hit in all environments.
Watch Video for Explanation of Lapua Ballistics App Features
Article Find by EdLongrange. We welcome reader submissions
Share the post "How to Use Lapua’s Advanced FREE Ballistics App"
Nosler has introduced a new line of RDF™ (Reduced Drag Factor) bullets that feature very high BCs, hybrid-type ogives, and tight, factory-closed meplats. Based on initial specs, Nosler’s new RDF bullets should be very competitive match projectiles for their respective bullet weights. Nosler claims its new RDF bullets have “the highest BCs and smallest, most consistent meplats of any hollow-point match bullet line on the market.” RDF projectiles will be initially offered in four calibers: .224, 6mm (.243), 6.5 mm (.264), and .308.
NEW Nosler RDF Bullets:
· 22 Cal 70 grain — G1 Ballistic Coefficient 0.416 | G7 Ballistic Coefficient 0.211
· 6mm 105 grain — G1 Ballistic Coefficient 0.571 | G7 Ballistic Coefficient 0.280
· 6.5mm 140 grain — BC field verification in process
· 30 Cal 175 grain — G1 Ballistic Coefficient 0.536 | G7 Ballistic Coefficient 0.270
High-BC RDF Bullets Feature Compound (Hybrid-type) Ogive Profiles
Nosler designed RDF bullets to have very high BCs for flatter trajectories and reduced wind drift. Nosler achieved high BCs by adopting a modern hybrid-type compound ogive, which bridges traditional tangent and secant bullet shapes. Another benefit of the compound (hybrid-type) ogive, is that this shape is normally less sensitive to bullet seating depth than a pure VLD-style, secant ogive shape. That allows hand-loaders to seat off the lands and still get excellent accuracy, which can be maintained even as the throat moves out over time. RDF bullets also feature a long boat-tail for aerodynamic efficiency.
Factory-Closed Meplats — No More Trimming and Pointing Tips
Compared to conventional match bullets, Nosler’s RDF bullets look quite different because the tips have been tightly closed up at the factory. Nosler claims a a 40% average reduction in meplat size vs. conventional hollow-point bullets. With Nosler doing the work on the tips, hand-loaders no longer need to point and trim tips, a laborious task done to improve BC and, more importantly, to make BCs more consistent for every bullet in the box. Consistent BC translates to reduced vertical spread at long range.
John Nosler Talks about RDF Bullets:
“Long-range competitive shooting [is] one of the fastest-growing shooting activities in the world, and quality bullets are the cornerstone of the sport” said John Nosler, Executive V.P. for the company. “Our engineers were challenged with delivering a bullet that would drastically reduce aerodynamic drag and increase ballistic consistency, providing shooters with an indisputable advantage. What we achieved is a leap in match bullet technology….”
Share the post "Nosler Introduces High-BC, Closed-Meplat RDF Match Bullets"
Lapua, maker of premium brass, bullets, and loaded ammo, has released a new, state-of-the-art Ballistics program that runs on smartphones and mobile devices. The all-new Lapua Ballistics Mobile App is the first mobile ballistics app utilizing the 6DOF calculation model. 6DOF refers to “Six Degrees of Freedom”, referring to the multiple variables the software calculates. As explained below, a 6DOF solver can account for 3 components of movement PLUS 3 components of rotation. Of course, as with other ballistics software, the Lapua Mobile App looks at Bullet BC, velocity, and cross-wind effects. This software can also account for subtle, extreme long range factors such as the Coriolis Effect.
Notably, the new Lapua Ballistics App includes a library of up-to-date bullet profiles based on extensive field tests with Doppler Radar. Having an ultra-sophisticated 6DOF solver combined with Doppler Radar data makes the Lapua Mobile App one of the most accurate ballistics Apps on the market. Lapua Ballistics offers the latest, Doppler-proven Lapua cartridge and bullet data for you to combine with your firearm and local weather information. The App also includes the option to define custom bullets.
The Lapua Ballistics App is available for Android and iOS smart phones and mobile devices free of charge. For more info, visit www.lapua.com/lapuaballisticsapp.
6DOF, the most accurate calculation method. Lapua cartridge / bullet information. Distance, wind speed and angle. outputs numerical, reticle, table and graph views, metric and imperial values. Set Point Blank-range to different sight-in distances and impact windows. Define custom bullets ( BC G1 or G7 and Siacci method), Pre-set max 4 powder temperature.Sight-in-POI, Coriolis calculation
Share the post "Lapua Releases FREE Advanced 6DOF Ballistics Mobile APP"
Berger has released two important informational updates for its line-up of bullets. First, the Ballistics Coefficients (BCs) have been updated for the vast majority of bullets Berger sells. In addition, G7 model BCs are being provided for most of the bullets. You will want to use the updated BC data, which is based on actual testing of recent production lots of bullets.
Second, Berger is now providing a dual twist-rate recommendation for most bullets. Berger is now lists a “minimum” barrel twist rate as well as an “optimal” twist rate. To get maximum long-range performance from your bullets, use a barrel with the “optimal” rate of twist.
CLICK HERE for the latest Berger Quick Reference Sheets with updated BCs and new Optimal Twist Rates. Eric Stecker, Berger President says: “We have tested every lot of bullets produced in the last several years to bring you these updated numbers for all of our bullets.”
Ballistic Coeffificent (BC) Updates with G7 Data
Berger notes: “We have updated all of our Ballistic Coefficients to be even more accurate.
Prior to 2008, all of Berger Bullets’ BCs were calculated using a computer prediction. Early in 2009, we began measuring BCs with live-fire testing. As a result, Berger’s BCs were updated and G7 BCs were also made available. This represented a dramatic improvement in the accuracy of performance data at that time. Since 2009, the BCs assessed for Berger Bullets have not been updated. As part of our ongoing effort to provide shooters with the best information possible, Berger has been testing every lot of bullets produced for the last several years. The result is updated and highly accurate running averages of BCs for recent production lots.
Here are some of the Updated BC Values for popular Berger Target (Match) Bullets:
G7 Form Factor Addition
Berger also added the G7 form factor to the Ballistics Quick Reference Sheet. The analysis of form factors can be very useful when considering a bullet’s long range performance potential. Going by BC alone can be deceptive since BC includes the weight and caliber of the bullet. Form factor indicates how much drag the bullet has, which is a very important consideration for all bullets of all calibers.
NEW Dual Twist-Rate Recommendations
Recommended twist rates for bullets are commonly listed as a single value, such as 1:12” (one rotation in 12″ of barrel travel). This may be overly simplistic. There is a big gray area of marginal stability in which bullets can fly with good accuracy, but with a reduced (i.e. sub-optimal) Ballistic Coefficient. Recognizing this reality, Berger is now listing two twist rates for each bullet it makes. The first is the minimum twist needed for good accuracy, which Berger has always recommended. The second is the new optimal twist rate, which is the twist that will stabilize the bullet to a level which achieves its full performance (BC) potential. CLICK HERE For more information.
Share the post "Berger Updates Bullet BC Data and Recommended Twist Rates"
The better, up-to-date ballistics programs let you select either G1 or G7 Ballistic Coefficient (BC) values when calculating a trajectory. The ballistic coefficient (BC) of a body is a measure of its ability to overcome air resistance in flight. You’ve probably seen that G7 values are numerically lower than G1 values for the same bullet (typically). But that doesn’t mean you should select a G1 value simply because it is higher.
Some readers are not quite sure about the difference between G1 and G7 models. One forum member wrote us: “I went on the JBM Ballistics website to use the web-based Trajectory Calculator and when I got to the part that gives you a choice to choose between G1 and G7 BC, I was stumped. What determines how, or which one to use?”
The simple answer to that is the G1 value normally works better for shorter flat-based bullets, while the G7 value should work better for longer, boat-tailed bullets.
G1 vs. G7 Ballistic Coefficients — Which Is Right for You?
G1 and G7 refer both refer to aerodynamic drag models based on particular “standard projectile” shapes. The G1 shape looks like a flat-based bullet. The G7 shape is quite different, and better approximates the geometry of a modern long-range bullet. So, when choosing your drag model, G1 is preferrable for flat-based bullets, while G7 is ordinarily a “better fit” for longer, boat-tailed bullets.
Drag Models — G7 is better than G1 for Long-Range Bullets
Many ballistics programs still offer only the default G1 drag model. Bryan Litz, author of Applied Ballistics for Long Range Shooting, believes the G7 standard is preferrable for long-range, low-drag bullets: “Part of the reason there is so much ‘slop’ in advertised BCs is because they’re referenced to the G1 standard which is very speed sensitive. The G7 standard is more appropriate for long range bullets. Here’s the results of my testing on two low-drag, long-range boat-tail bullets, so you can see how the G1 and G7 Ballistic coefficients compare:
G1 BCs, averaged between 1500 fps and 3000 fps:
Berger 180 VLD: 0.659 lb/in²
JLK 180: 0.645 lb/in²
The reason the BC for the JLK is less is mostly because the meplat was significantly larger on the particular lot that I tested (0.075″ vs 0.059″; see attached drawings).
For bullets like these, it’s much better to use the G7 standard. The following BCs are referenced to the G7 standard, and are constant for all speeds.
Many modern ballistics programs, including the free online JBM Ballistics Program, are able to use BCs referenced to G7 standards. When available, these BCs are more appropriate for long range bullets, according to Bryan.
[Editor’s NOTE: BCs are normally reported simply as an 0.XXX number. The lb/in² tag applies to all BCs, but is commonly left off for simplicity.]
Share the post "Coefficient Conundrum: G1 vs. G7, Which BC Should You Use"
How do you build better (more precise) ammo drop tables? With radar, that’s how. Barnes Bullets is using Doppler Radar to develop the drop tables for its new Precision Match line of factory ammunition. The Doppler radar allows Barnes to determine actual velocities at hundreds of points along a bullet’s flight path. This provides a more complete view of the ballistics “behavior” of the bullet, particularly at long range. Using Doppler radar, Barnes has learned that neither the G1 nor G7 BC models are perfect. Barnes essentially builds a custom drag curve for each bullet using Doppler radar findings.
Use of Doppler Radar to Generate Trajectory Solutions
by Barnes Bullets, LLC
Typical trajectory tables are generated by measuring only two values: muzzle velocity, and either time-of-flight to a downrange target, or a second downrange velocity. Depending on the test facility where this data is gathered, that downrange target or chronograph may only be 100 to 300 yards from the muzzle. These values are used to calculate the Ballistic Coefficient (BC value) of the bullet, and the BC value is then referenced to a standardized drag curve such as G1 or G7 to generate the trajectory table.
This approach works reasonably well for the distances encountered in most hunting and target shooting conditions, but breaks down rapidly for long range work. It’s really an archaic approach based on artillery firings conducted in the late 1800s and computational techniques developed before the advent of modern computers.
There is a better approach which has been utilized by modern militaries around the world for many years to generate very precise firing solutions. Due to the sizeable investment required, it has been slow to make its way into the commercial market. This modern approach is to use a Doppler radar system to gather thousands of data points as a bullet flies downrange. This radar data is used to generate a bullet specific drag curve, and then fed into a modern 6 Degree of Freedom (DOF) [ballistics software program] to generate precise firing solutions and greatly increase first-round hit probability. (The 6 DOF software accounts for x, y, and z position along with the bullet’s pitch, yaw, and roll rates.)
Barnes has invested heavily in this modern approach. Our Doppler radar system can track bullets out to 1500 meters, recording the velocity and time of flight of that bullet every few feet along the flight path. Consider the graph below showing a bullet specific drag curve referenced to the more common G1 and G7 curves:
Neither of the standard curves is a particularly good match to our test bullet. In the legacy approach to generating a downrange trajectory table, the BC value is in effect a multiplier or a fudge factor that’s used to shift the drag curve of the test bullet to try and approximate one of the standard curves. This leads to heated arguments as to which of the standardized drag curves is a better fit, or if multiple BC values should be used to better approximate the standard curve (e.g., use one BC value when the velocity is between Mach 1 and Mach 2, and a different BC value when the velocity is between Mach 2 and Mach 3.) Barnes’ approach to creating trajectory tables is to generate bullet-specific drag curves, and use that data directly in a modern, state-of-the-art, 6 DOF ballistics program called Prodas to generate the firing solution.
Story tip from EdLongrange. We welcome reader submissions.
Share the post "Barnes Calculates Ballistics Using Doppler Radar Speed Data"
Applied Ballistics has just released a fully upgraded version of its popular Tactical App for Android devices. Bryan Litz tells us: “AB Tactical has received a major overhaul (including a new Bullet Library with over 420 options). The upgrade will require that you uninstall the previous version that you have of the application and then install this new version. This is due to the complete re-write of the internal database handling.” NOTE: You need to record your gun-specific data before you install the new version. Details of the updated AB Tactical App are featured in the new 19-page USER Manual.
NOTE: This upgrade is for the Applied Ballistics Tactical Version only. There is no iPhone version of this App, and this is not the standard app that can be purchased from Google Play, or iTunes.
The new version of AB Tactical has a host of important enhancements:
Following Sierra’s introduction of Tipped MatchKing (TMK) bullets, Bryan Litz of Applied Ballistics LLC has received many requests to determine the Ballistic Coefficient (BC) of these bullets through testing. Below are Litz’s findings for four out of the six bullets he has able to acquire and test so far.
As you can see from the above table, when Sierra’s G1 BC is averaged for all speed ranges (which is representative of long range shooting) the results closely match the Applied Ballistics’ measurements of the same bullets, averaged from 3000 to 1500 FPS. The G7 BC doesn’t suffer nearly the velocity sensitivity as G1 and should be used for modern long range bullets when possible. Bryan tells us: “When I get the .22 caliber 77gr, and the .308 caliber 168gr tested, I’ll update the table.”
How do these Tipped MatchKings compare to standard MatchKings? According to Bryan’s measurements, here are some comparisons:
The 69gr TMK BC is +8% compared to the 69gr SMK
The 125gr TMK BC is -5% compared to the 125gr SMK (Litz believes this SMK was ‘pointed’)
The 155gr TMK BC is identical to that of the 155gr SMK (#2156, which is also pointed)
The 175gr TMK BC is +10% compared to the 175gr SMK
Bryan provided this additional advice for users of Ballistics programs: “Sierra’s stated BCs are measured by live fire, and are typically pretty accurate if the velocity bands are properly observed (7mm being the exception). A common error is to look at the BC that Sierra gives for your MV and just use that. Doing so overestimates the performance of the bullets over long range, and will cause you to hit low compared to your trajectory predictions.”
Share the post "Litz Field-Tests BCs of Sierra Tipped MatchKings"
Applied Ballistics LLC has launched a completely updated website with many new features including an archive of FREE articles plus a full-featured online ballistics calculator. If you are interested in precision shooting, you should visit the “new and improved” Applied Ballistics website. Browse through the new content and try out the advanced Ballistics Calculator.
NEW Online Ballistics Calculator
There are many free online ballistics calculators, but the new Applied Ballistics web utility goes far beyond other web-based options. Bryan Litz states: “No ballistic solution can be more accurate than its inputs”. Accordingly, Applied Ballistics offers the most reliable BC data available — a built-in library of measured G1 and G7 BCs for over 200 bullets. The Online Ballistics Calculator also allows you to “offload” your results for use in the field in two ways. First, you can save a file for transfer to an Applied Ballistics Kestrel. (This process is supported with a ‘save profile’ option from the output page.) Alternatively, you can send the ballistics profile to Accuracy First DG to have a whiz wheel created.
The Online Ballistics Calculator has many “advanced” features. For example, you can enter sight scale factors to account for scopes which don’t track perfectly true, and also zero offsets which allows you to compensate for imperfect zeros. In addition, this is the first online ballistics program to provide dynamic WEZ (Weapon Employment Zone) analysis. This WEZ feature gives users the ability to calculate hit percentage on targets at a variety of ranges (and in various environments).
Bullet Data Files
The new website provides a number of detailed bullet data files. These data files include geometric dimensions, drag/BC data at multiple velocities, and detailed stability maps. The information is based on direct measurements and live fire testing conducted by Applied Ballistics.
Digital Media
The new Applied Ballistics website features a “digital library” of authoritative articles in PDF and eReader (Kindle, Nook) formats. You can download these FREE articles by clicking on the “Recreational” and “Professional” tabs at the top of Applied Ballistics Home Page, and then selecting “Recreational Articles” or “Professional Articles” from the pull-down menus.
Sample Ballistics Article Gyroscopic (Spin) Drift and Coriolis Effect
Most long range shooters are aware of the effects of gravity, air resistance (drag), and wind vectors on their bullets’ trajectory. Gravity, drag, and wind are the major forces acting on a bullet in flight, but they’re not the only forces. In this article, Bryan Litz explains some of the more subtle forces that influence a bullet’s flight.
Sample Professional Article 300 Winchester Magnum vs. 338 Lapua Magnum WEZ Analysis
The specific intent of this Weapon Employment Zone (WEZ) report is to compare the ballistic performance of the 300 Winchester Magnum to the 338 Lapua Magnum with several available ammunition types. Understanding how these weapons compare in terms of hit percentage is important in the context of modern military applications.
Special Projects
Applied Ballistics is involved in some advanced, special projects. The new website showcases some of these high end ballistics solutions. Bryan Litz notes: “We have an active ballistics laboratory, highly capable contractors and industry partners who all contribute to provide practical and accurate solutions for a range of recreational and professional applications.”
Share the post "New Applied Ballistics Site Has Ballistics Calculator and More…"
The better, up-to-date ballistics programs let you select either G1 or G7 Ballistic Coefficient (BC) values when calculating a trajectory. The ballistic coefficient (BC) of a body is a measure of its ability to overcome air resistance in flight. You’ve probably seen that G7 values are numerically lower than G1 values for the same bullet (typically). But that doesn’t mean you should select a G1 value simply because it is higher.
Drag Models — G7 is better than G1 for Long-Range Bullets
Drag Models — G7 is better than G1 for Long-Range Bullets
The better, up-to-date ballistics programs let you select either G1 or G7 Ballistic Coefficient (BC) values when calculating a trajectory. The ballistic coefficient (BC) of a body is a measure of its ability to overcome air resistance in flight. You’ve probably seen that G7 values are numerically lower than G1 values for the same bullet (typically). But that doesn’t mean you should select a G1 value simply because it is higher.
This approach works reasonably well for the distances encountered in most hunting and target shooting conditions, but breaks down rapidly for long range work. It’s really an archaic approach based on artillery firings conducted in the late 1800s and computational techniques developed before the advent of modern computers.
