July 28th, 2021

2021 Mid-Range Champions: Mayhall F-Open and Rutherford F-TR

NRA F-Class F-Open F-TR National Championship Camp Atterbury

The 2021 NRA Mid-Range F-Class Championships are complete, with the Long-Range competition running right now. We commend the new Mid-Range Champions who both shot spectacular matches. Roger Mayhall didn’t drop a point in F-0pen, finishing with 1800-131X to win F-Open. That’s a brilliant performance.

In F-TR division, Drew Rutherford topped a competitive field with 1791-96X. Hail the new Champions!

Roger Mayhall Wins F-Open Mid-Range with Stunning 1800-131X

NRA F-Class F-Open F-TR National Championship Camp Atterbury

NRA F-Class F-Open F-TR National Championship Camp Atterbury6mm Dasher Rifle Takes F-Open Title
Roger shot a 6mm Dasher, a wildcat based on the 6mmBR cartridge. Roger said his rifle was a tack-driver: “I think I owe my gunsmith a beverage or two!” Roger did a superb job of wind-reading to finish 3 days without dropping a point.

On the F-Class Competition Facebook Group, other shooters praised Roger’s amazing 1800-131X performance:

“I’ve known Roger for over 5 years. Great man, always willing to help a fellow shooter. Shooting clean all three days with an incredible X-count. Well done! So much for the claim that a 6mm can’t win an Aggregate!” — Jason Simes

“Good job buddy — I told you those Dashers could shoot. Just outstanding shooting.” — Chris Ford

“Awesome shooting Roger! Chalk up a national championship to the 6mm.” — Dan Bramley

About Roger Mayhall’s Championship-Winning Dasher
Posting on Facebook, Roger wrote: “I’ve had a few people ask about the equipment I used in the Mid-Range at Nationals. Here are the particulars:

The gun was a 6 Dasher, supported by a Defiance Deviant action, Bix ‘N Andy trigger, Alex Wheeler LBR F-Class stock, Sightron SV ED 10-50x60mm scope, Dan Bramley tuner on a 30″ Krieger [1:8″-twist] barrel. Also used were a SEB NEO front rest, Dima Rifle Systems Rear Bag with a Dead Bottom Bag. My load consisted of the 105gr Berger Hybrid in a fire-formed 6BR Lapua case propelled by Varget powder and a CCI 450 primer. Barrel work was done by Dan Bramley[.]”

Drew Rutherford Wins F-TR Mid-Range Championship

NRA F-Class F-Open F-TR National Championship Camp AtterburyDrew Rutherford put on a strong performance to win the F-TR Mid-Range Championship. Rutherford was using Eliseo R1 Tubeguns fitted with SEB JoyPod coaxial bipod. Chassis-maker Gary Eliseo noted: “Congratulations to Drew Rutherford, national midrange FTR champion! Drew used his .223 Rem and .308 Win R1 rifles to win the Mid-Range Championship, well done Drew!”

The Competition Machine (Eliseo) R1 Chassis is a very versatile system. As fitted with rear bag-riders and SEB JoyPods, Drew used his R1s with great success. But the same chassis, less bag-rider and bipod, can be used for “hard-holding” Palma Matches, or even High Power competition.

NRA F-Class F-Open F-TR National Championship Camp Atterbury

2021 NRA F-Open Mid-Range TOP TEN
Mid-Range F-TR National Championship
2021 NRA F-TR Mid-Range TOP TEN
Mid-Range F-TR National Championship


F-Open Mid-Range Full Results | F-TR Mid-Range Full Results



Solomon Sets New Nat’l F-Open 1-Day Record with 600-53X

Finishing second in the F-Open Mid-Range Championship was Bret Solomon with 1798-135X. That was notable because Bret posted the high X-Count, AND set a single-day National Record in the process. Gunsmith Thomas “Speedy” Gonzalez posted: “Congratulations to my friend Bret Solomon on shooting a 200-20X and then setting a new [1-Day] 600-yard National Record of 600-53X at the U.S. F-Class Nationals. Bret was shooting the Lil’ Red Devil in 7mm RSAUM with a new Bartlein 4-groove barrel I forced him to shoot!”

Brett Solomon Lil' Red Devil F-Open Rifle

Here are photos of Bret Solomon’s Lil’ Red Devil rifle as previously featured in our Daily Bulletin.

Brett Solomon Lil' Red Devil F-Open Rifle

Christened the “Little Red Devil” by Speedy, this ruby red, flame maple-stocked beauty is chambered in .284 Winchester. It features a Melonited BAT 3LL action with two bolts (regular and magnum bolt face). The stock is crafted by Will McCloskey using advanced CNC machines, allowing ultra-precise tolerances for improved tracking and perfect geometry.

Torrefied Wood from Yamaha, CNC-Milled to Perfection
This wood is very special — the flame maple was sourced from Yamaha which used a torrefaction process to stabilize the wood and prevent warping. Yamaha’s proprietary ARE process was developed by Yamaha for musical instruments. Speedy explained that Yamaha uses heat and pressure (we think) to stabilize the wood and dampen vibrations. During torrefaction, the sap in the wood actually crystallizes.

F-Open rifle Bret solomon

For this rifle build, the torrefied wood blank was CNC-milled by Will McCloskey to “best-in-industry” tolerances. A special red-tone polyester finish Lee Garver, a noted guitar painter. This very hard, yet glossy finish makes the stock “pretty nearly scratch-proof” according to Speedy.