New Nightforce 15-55x52mm Competition Scope — Field Report by Darrell Buell
A few weeks ago at SHOT Show, Nightforce Optics introduced a new Competition Scope. When Nightforce heard about the upcoming U.S. Team practice session in Phoenix, the optics-maker overnighted us two prototype Comp Scopes to wring out under match conditions.
From the start, we were impressed by these new 15-55X Competition Scopes. Darrell mounted one on his personal competition rifle, and the other on a mocked-up action, so people could hold it up safely in a steady fashion behind the firing line. The new scopes acted like magnets, drawing people from all over the Berger SW Long Range Nationals to check them out.
The new Competition Scope is a 15-55x52mm. The new scope’s ED (extra-low dispersion) glass yields outstanding resolution. Remarkably, the resolution in the Competition scopes is even slightly better than the Nightforce 12-42x56mm NXS, with its larger 56mm objective lens. The color is definitely ‘crisper’ as well. Not surprisingly, the image quality is what most people noted first (see through-the-lens photo at right). The glass is great, and Nightforce included other thoughtful features as well. First is the side parallax adjustment that competitors have been wanting for years (this is one of the draws for the NXS scope in competition). The higher zoom range (with 55X power on tap), and the 60 MOA of vertical travel is also a much-asked-for (and useful) feature.
In competition, the high-quality glass in the new Comp Scopes proved very beneficial. The Berger SW LR Nationals took place in Phoenix, in February, so conditions ranged from cold and windy, to warmer with moderate mirage. In some of the heavier mirage conditions (not massive mirage, by any means, but enough that the magnification on a 12-42X NXS would probably have been turned down to 32-35 power), the Competition Nightforce stayed at 45 power and above. The turrets were the usual Nightforce precision, good defined, tactile adjustment clicks (5 MOA per revolution). The only improvement there would be to have the windage turrets adjust in ¼ MOA clicks (yielding 10 MOA per revolution), which Nightforce assures us that will be done for the Team scopes. [Current production 15-55X Competition Scopes have 1/8 MOA windage clicks.]
The Team’s response to the prototype scopes was overwhelmingly positive. Nightforce has generously agreed to provide 10 new Competition scopes for the USA F-Class Team competing in South Africa next month. The Bloemfontein Range will be an excellent test of the new 15-55X scope’s capabilities!
Visit to Nightforce Production Center in Idaho
The prototype scopes had to be returned to Nightforce, and as it wasn’t much of a detour, Team Captain Darrell Buell paid a visit to Nightforce’s Orofino, Idaho production facility. Nightforce rolled out the welcome mat, providing not only a highly detailed tour of the location, but also the opportunity to say a few words in front of a meeting of all of the day shift and evening shift staff. It was good fun for everyone, the staff seemed genuinely fascinated by what the Team was doing with their scopes all over the world, and Darrell was equally interested in the attention and quality that was invested by the staff there in each scope produced.
During the tour Nightforce provided a convincing demonstration of the rugged durability of NF optics. Each assembly station had a steel pillar fixture near the bench; the pillars were covered in a thin layer of rubber padding. As a scope was completed, the technician would grasp it by the ocular end, and strike the objective end (quite sharply) on the rubber-coated pillar three times. The scope would then be placed back on a optical test stand, and the image checked for shifting. This ‘strike test’ was then repeated three additional times (with associated checks), so that the top, bottom, left side, and right side were all tested and checked.
At SHOT Show we checked out the all-new, side-focus 15-55x52mm Competition™ Scope from Nightforce Optics. This comes in both Silver finish and Matte Black. The black version looks like an NXS. The silver looks good but the finish is pretty shiny and contrasts with the black controls (some folks will like that, others won’t). We worked the knobs and side-parallax controls. The clicks are positive and the dial resistance seems just about right (very similar to an NXS). The ED (low-dispersion) glass in the new 15-55X provides high contrast, low chromatic aberration, and 92% light transmission. And this scope is a LOT lighter than the current 12-42x56mm — nearly half a pound less! The new 15-55x52mm sells for $2231.00.
Watch Video to See NF 15-55x52mm Competition Scope (and B.E.A.S.T. sneak preview.)
The big news is that, with a weight of just 27.8 ounces, the new 15-55X Nightforce Competition Scope is 24% lighter than the NF 12-42×56 Benchrest model, and 20% lighter than the NF 12-42×56 NXS. Like the NXS series, the new Competition scope offers side parallax adjustment; and, it will focus from 25 yards to infinity, making it suitable for rimfire and airgun shooting as well as centerfire competition. The turrets provide positive and repeatable .125 MOA (eighth-minute-of-angle) clicks. Each rotation provides 5 MOA of adjustment. And we’re pleased to see that the Competition Scope offers a full 60 MOA of travel — for both windage and elevation. That’s impressive. We’re pleased to see the new scope offers a fast-focus, European-style diopter eyepiece (photo below right). Two reticles will be offered initially: the CTR-1 (fine crosshair with target dot) and DDR (double dot with hold markers). You can see the reticles in the video above.
Thankfully, you won’t have to wait long to get a 15-55x52mm Comp Scope. Nightforce says it will start shipping in mid-February. CLICK HERE for more information.
Share the post "First Look: NEW Nightforce 15-55x52mm Competition Scope"
Nightforce Optics has just announced an all-new, side-focus 15-55x52mm Competition™ Scope. It looks very impressive. The ED (low-dispersion) glass in the new 15-55X provides high contrast, low chromatic aberration, and 92% light transmission. And this scope is a LOT lighter than the current 12-42x56mm — that will help guys make weight. We’re pleased to see the new scope offers a fast-focus, European-style eyepiece. Two reticles will be offered initially: the CTR-1 and DDR (shown below). The big question is “how much will it cost?”. A Nightforce dealer told us that Minimum Advertised Price (MAP) will be $2231.00. We’ll run a full report on this scope when we get our hands on it at SHOT Show.
The big news is that, with a weight of just 27.8 ounces, the new 15-55X Nightforce Competition Scope is 24% lighter than the NF 12-42×56 Benchrest model, and 20% lighter than the NF 12-42×56 NXS. Like the NXS series, the new Competition scope offers side parallax adjustment; and, it will focus from 25 yards to infinity, making it suitable for rimfire and airgun shooting as well as centerfire competition. The turrets provide positive and repeatable .125 MOA (eighth-minute-of-angle) clicks. Each rotation provides 5 MOA of adjustment. And we’re pleased to see that the Competition Scope offers a full 60 MOA of travel — for both windage and elevation. That’s impressive. CLICK HERE for more information.
Share the post "NEW Nightforce 15-55x52mm Side-Focus Competition Scope"
Nightforce Benchrest Model vs. NXS by Jason Baney, AccurateShooter.com Asst. Editor
Anyone who has considered purchasing a Nightforce scope inevitably asks: “Which one best suits my application — NXS or Benchrest model?” Shooters also ask: “Why is there such a price difference between the NXS and Benchrest (BR) models?” This article compares the features of the two models (NXS and BR), and provides some guidelines for choosing the right Nightforce scope for your needs.
The NXS line is priced a bit higher, costing about 40% more than the comparable Benchrest model. NXS scopes are also a bit more robust, and feature a side parallax adjustment (side-focus), whereas the BR scopes have an adjustable front objective for correcting parallax. Another main difference is click value, as the BR scopes have 1/8 MOA clicks while the NXS scopes currently feature 1/4 MOA clicks. The “zero-stop” feature is something to consider as well, as it is only available on the NXS models and allows the shooter to quickly spin the elevation turret back down to a close range zero, usually 100 yards, without counting clicks.
Click Value: 1/4 MOA vs. 1/8 MOA
The tighter 1/8 MOA click value is generally more desirable for long range shooting as eighth-minute clicks allow the shooter to adjust Point of Impact more precisely than quarter-minute clicks. The 1/4 MOA clicks are worth about 2.6″ at 1000 yards, while a 1/8 MOA click will move your POI only 1.3″ at 1000. It is easy to see why the 1/8 MOA click value may be preferable when trying to dial in on a 3-5 inch X-Ring or 10-Ring. This is one reason why so many F-Classers favor eighth-minute clicks. The F-Class X-ring is just 5″ in diameter.
If you wanted 1/8 MOA clicks, it used to be that you had to choose the Nightforce BR model. That has changed. Nightforce now offers 8-32X and 12-42X NXS models with 1/8 MOA clicks. The 1/8 MOA-click NXS lineup is ideal for those who prefer side-parallax control AND more precise click values. Another consideration regarding click value is the availability of milrad clicks. “Mil” clicks are desirable when the scope has a mildot or MLR reticle, or similar reticle based on a milradian scale. Mil clicks are only available on NXS scopes at this time.
Ruggedness — NXS has the Edge Durability is not usually an issue with target shooters as the scope will mainly be used in benign environment on a fixed-distance range. So, as long as a scope tracks and performs reliably, most target shooters won’t fret about durability. For those that may use their rifles in a tactical or field situation, or when hunting, the added robustness of the NXS scope may prove quite important. Now the BR scopes are no slouch as far as durability compared to similar scopes, but, in my experience, they cannot take quite the abuse that the NXS scopes can.
Side-Focus Parallax vs. Front Adjustable Objective
As far as the side parallax adjust vs. adjustable objective, this usually boils down to personal preference. The side-focus parallax adjustment NXS model fits one additional focus lens in the scope body — a lens not required in the front-adjusting Benchrest model. According to Nightforce, this one extra lens in the NXS can reduce potential light transmission by 1.0 to 1.5 percent in the NXS compared to the BR model. However, most human eyes will not notice the difference, and overall resolution should be virtually the same. The side-focus NXS models will be much more convenient from a prone position than will the BR scopes as it is not necessary to reach out of position to correct parallax. The BR scopes tend to be more convenient in fixed distance environments like benchrest or F-class, where there tends to be multiple shots at a similar distance, or there is plenty of time to adjust parallax. Compared to the NXS models, the BR scopes use more movement to produce the same amount of parallax adjustment — so you can say the BR offers “finer” adjustment. By contrast, the NXS side-focus delivers a coarser yet quicker adjustment requiring less movement to “dial-in” minimal parallax.
Zero-Stop Feature on NXS Only Another point of consideration is the availability of a “zero-stop.” This is particularly useful in the same situations that the NXS scopes make the most sense. Namely, tactical or field situations where there may be stress combined with longer shots where dialing the turrets is required. The zero stop allows the shooter to set a stop point, usually a 100-yard zero. Then no matter where the turret is positioned in its span of travel, the zero can be quickly re-established by spinning the turret down until it stops at the pre-set zero.
At present, the Zero-stop is available on all Nightforce variable NXS models except the 12-42×56. So you CAN get the zero-stop on the 8-32 NXS, but not the 12-42 NXS.
CONCLUSION
With the new 1/8 MOA NXS models now available, the decision on which Nightforce scope to buy, will come down to focus/parallax adjustment, field hardiness, and price. Though it may still be a hard decision in certain situations, hopefully this discussion has made the decision a bit easier. All in all, Nightforce scopes are a great value and they offer enough choices to satisfy nearly all shooting situations. Nightforce Scopes can be purchased through EuroOptic.com and other Nightforce dealers.
Share the post "Nightforce NXS vs. Benchrest Model — Which is Best for You?"
Nightforce Optics, Inc. (Nightforce), has completely redesigned and updated its website. Visit www.NightforceOptics.com to check out the new look and new features. The new site includes easier navigation, extensive product information, and a number of helpful tutorial features. NightforceOptics.com also includes photo galleries, product specs, and a global dealer locator.
New Site Offers Video Tutorials, Plus Interactive Reticle Calculator
The redesigned site includes detailed information on the products, reticles and technology. For example, the online Velocity™ Reticle Calculator allows the shooter to interactively explore the application and performance of the unique Nightforce Velocity™ 1000 and Velocity™ 600 reticles, relative to their own rifle’s ballistic profile. Visitors will find several tutorial videos, such as the one explaining the Nightforce ZeroStop™ system on the elevation turret. This allows the shooter to instantly return to his chosen zero point, no matter how many adjustments in elevation have been made. The site also conveys a wide range of general riflescope knowledge and information to help shooters hone their long-range skills.
“Delivering as much information to our customers as possible, within a visually appealing and useful environment, was our goal for the new website,” said Terry L. Eby, marketing project manager for Nightforce. “We will continue to add new information to the site that will help Nightforce customers[.]”
Share the post "Nightforce Optics Launches Upgraded, Redesigned Website"
Nightforce Optics has enhanced their elevation adjustments in this year’s lineup of high-magnification Nightforce scopes. Now you can get DOUBLE the elevation travel with a SINGLE TURN of the elevation knob. For an NXS with 1/4-MOA clicks, this means you can get a full 20 MOA of elevation travel with a single turn of the knob.
Bravo, Nightforce — this simple enhancement can make a BIG difference in the field. With most “high-performance” calibers, 20 MOA will get you to 700 yards or beyond. This means that the varminter can zero at all likely hunting yardages within the same revolution of the turret. That makes life much simpler, and reduces the chance of being way off in your elevation. No more confusion about which revolution you’re on….
Likewise, a tactical shooter, moving from near to far targets and back again, can likely stay on the same revolution at most target yardages. Even if you shoot out to 1000 yards, you will be able to get all the way out to 1K within two complete revolutions. This upgrade — doubling the elevation travel in each turret revolution — gives Nightforce scopes practical performance (inside 700 yards) similar to much more expensive scopes fitted with a single-turn or double-turn elevation systems (such as the U.S. Optics EREK knob). The new high-speed adjustment system will be offered in Nightforce’s 15x, 22x, 32x, and 42x series of scopes. Anticipated delivery date for scopes with the high-speed adjustment is May, 2010.
What About Retro-fitting Older NF Scopes?
Nightforce plans to provide an upgrade path for existing Nightforce scopes “eventually, but not right away”. The upgrade would allow installation of the “high-speed adjustment” system on older NF scopes. We don’t have any more specifics. Nightforce has NOT revealed how much the high-speed conversion would cost or when it might be available for pre-2010 scopes.
Share the post "Nightforce Adds High-Speed Elevation Adjustments for 2010"
LINK: Nightforce NXS vs. Benchrest Model Compared
OK, what really are the differences between Nightforces NXS and Benchrest models… beyond the obvious? In this informative video, Nightforce Exec Kyle Brown provides definitive answers.
Share the post "Greatest Hits: Nightforce NXS vs. Nightforce BR Model"
Nightforce Benchrest and NXS scopes are very popular among our readers. The Nightforce 12-42×56 BR model is the scope of choice for top F-Class and 1000-yard shooters. It offers sharp glass, big-time magnification, precision parallax control (via a rotating front objective), plus a wide choice of reticles. The NXS offers these same qualities, but it uses a side-parallax adjustment. Many shooters building their first long-range rifle ask: “Which should I get–the Nightforce BR model or the NXS?” Nightforce Sales Manager Kyle Brown helps answer that question in the video below. Kyle explains the major (and minor) differences between the BR and NXS scope lines. You’ll find this video very informative.
New First Focal Plane 3.5-15×50 F1 Scope
The new NXS 3.5-15×50 F1 was created at the request of U.S. military and other professional sharpshooters. They wanted a rugged scope that offers a choice of elevation/windage click values, plus a ranging reticle in the First Focal Plane (FFP). A reticle located in the first focal plane remains in the exact same ratio to the target across the scope’s entire magnification range. The FFP design (designated by “F1″) is optimal for rangefinding purposes, since the reticle’s markings remain consistent relative to target size at all magnification settings. The 3.5-15×50 F1 scope will be offered with three click-value options: 1/4 MOA, 0.1 Mil Radians, or 1.0 MOA elevation + 0.5 MOA windage clicks.
HOT NEWS: If you like the NXS 3.5-15×50 F1, take note that a Nightforce 5.5-22×56 FFP NXS is coming in the fall of 2009. Plus Kyle told us that the Nightforce Compacts and First Focal Plane scopes now have their scope bodies (main tubes) crafted in Idaho. So, you’ll notice that they are now stamped “Made in USA”.
New Ballistic-Compensating Reticles Offered for 2009
Nightforce will offer a variety of NEW ballistic reticles that provide “hold-over” hashmarks corresponding to the trajectories of popular hunting rounds. With these new christmas-tree style reticles, hunters and varminters can rapidly adjust to different ranges without cranking-in elevation with the top turret. The reticles also include horizontal hash marks corresponding to calculated wind drift in mph (not MOA or mils). There are three basic options, one each for low, medium, and high velocity cartridges. In addition, Nightforce may offer Horus ballistic-compensating reticles, and possibly the Holland ART reticle, later in the spring of 2009.
New Ring-Top Bubble Level and Level/ADI
Nightforce has introduced the Top of Ring Bubble Level, a low-profile level built directly into the top half of a scope ring. This fits in place of the upper half of a Nightforce Ring (e.g. Unimount, Direct Mount, and Nightforce Mil-Spec). Like other anti-cant devices, the NF bubble level helps the shooter avoid canting his rifle left or right, which can throw off the shot significantly at long ranges. The level also helps ensure your reticle is plumb when mounting the scope.
The Top of Ring Bubble Level is available in three versions: 1) Ring Level alone; 2) Ring level with integrated mount for the Nightforce ADI (Angle Degree Indicator); 3) Ring level with mount plus ADI unit (complete system). You’ll want the ADI if you often have to make shots at steep angles. Calibrated in degrees, the ADI instantly gives the shooter the up or down angle for the shot. Plug that number into a ballistics calculator (or angle drop chart) and you’ve got your corrected drop for the true range to the target.
We definitely recommend an ADI for hunting, and for competition disciplines where up/down angle shots are required. The ADI is simple, robust, and requires no batteries. Mounting the ADI directly to the scope ring is the slickest installation yet for this useful device. This mounting set-up was a collaboration between Shawn Carlock (Defensive Edge), Ward Brian (Sniper Tools ACI), and Nightforce.
For more info, contact Nightforce Optics, Inc., 1040 Hazen Lane, Orofino, ID 83544, tel (208) 476-9814, or visit NightforceOptics.com
Share the post "SHOT Show Report: News from Nightforce"
The new Competition Scope is a 15-55x52mm. The new scope’s ED (extra-low dispersion) glass yields outstanding resolution. Remarkably, the resolution in the Competition scopes is even slightly better than the Nightforce 12-42x56mm NXS, with its larger 56mm objective lens. The color is definitely ‘crisper’ as well. Not surprisingly, the image quality is what most people noted first (see through-the-lens photo at right). The glass is great, and Nightforce included other thoughtful features as well. First is the side parallax adjustment that competitors have been wanting for years (this is one of the draws for the NXS scope in competition). The higher zoom range (with 55X power on tap), and the 60 MOA of vertical travel is also a much-asked-for (and useful) feature.
At SHOT Show we checked out the all-new, side-focus 
Durability is not usually an issue with target shooters as the scope will mainly be used in benign environment on a fixed-distance range. So, as long as a scope tracks and performs reliably, most target shooters won’t fret about durability. For those that may use their rifles in a tactical or field situation, or when hunting, the added robustness of the NXS scope may prove quite important. Now the BR scopes are no slouch as far as durability compared to similar scopes, but, in my experience, they cannot take quite the abuse that the NXS scopes can.
Another point of consideration is the availability of a “zero-stop.” This is particularly useful in the same situations that the NXS scopes make the most sense. Namely, tactical or field situations where there may be stress combined with longer shots where dialing the turrets is required. The zero stop allows the shooter to set a stop point, usually a 100-yard zero. Then no matter where the turret is positioned in its span of travel, the zero can be quickly re-established by spinning the turret down until it stops at the pre-set zero.
Nightforce Optics, Inc. (Nightforce), has completely redesigned and updated its website. Visit 
New Ring-Top Bubble Level and Level/ADI
