Stolle Panda Drop Port Conversion by S&S Precision Rifles
The Drop Port is a great feature for benchrest shooters. You can run a bolt without an ejector, yet your cartridge will extract smoothly and reliably each time you pull the bolt back. Stiller’s Precision Firearms pioneered the Drop Port design, and Jerry Stiller offers this as a popular option with his Cobra, Viper, Python, D-Back, and Diamondback actions. The Drop Port is amazing in its simplicity (watch video below). As you pull the bolt rearwards, the fired case slides downward into a funnel. As it tilts nose-down, the case rotates free of the six-o’clock extractor, falls nose first down the funnel, and finally exits through a hole in the bottom of the stock. Gravity does all the work.
S&S Panda Drop Port Conversion
Until recently, if you wanted a Drop Port, your only option was to purchase a Stiller action or engineer a conversion yourself. Now the owners of Kelbly Panda actions can enjoy drop-port functionality via a conversion performed by S&S Precision Rifles in Texas. The folks at S&S will mill a slot in the bottom of your action, and then install a drop funnel in your stock. The conversion work is done so well you’d think the Pandas were originally made as Drop Ports by Kelbly. Drop Port conversions will be available for popular small match cartridges including 22 PPC, 6 PPC, 6mmBR, 6BRX, 6 Dasher, 6.5 Grendel, and 30 BR (plus other wildcats in the BR family).
Conversion Will Be Costly — New Actions Are Best Candidates
This conversion will not be cheap. Because Drop Ports require a six o’clock extractor, you’ll probably need a replacement bolt for your Panda. S&S is in discussion with Pacific Tool & Gauge to provide these bolts. You can probably resell your existing bolt, but the upfront conversion cost could approach $400 with new bolt and labor. S&S hopes to announce firm pricing in 4-6 weeks. Don “Stick” Starks, S&S’s lead gunsmith, also cautions that this conversion is most cost-effective with Panda actions that have not yet been installed, or which are set up with pillars (as opposed to glue-ins). Stick explained: “If your Panda is already glued in, then we have to remove the action, mill the port, install the funnel, and then re-bed the whole thing. That’s going to substantially increase your cost. It’s more logical to do this on a Panda that has not yet be put in a rifle.”
In the video above, you can watch S&S Precision convert a Stolle Panda action to a Drop Port, and then see how the converted Panda functions. The rifle is a 30BR owned by FORUM member Truckincars, who also created the video.
Kelbly’s reports: “The new Atlas action is a Remington 700 clone made to benchrest standards. The action body is made of 416RS stainless steel. Bolts are made of 4140 alloy steel on the body and stainless steel on bolt handle. The Atlas action will come standard as a single-shot with trigger bracket for Rem-style triggers, aluminum bolt shroud, cone bolt on 222, PPC, and 308, flat bolt on .532 bolt face, and top safety cutout. The headspace is .692 without recoil lug. The thread will be 1 1/16 x 18 tpi.”
Reloading Tools & Components:
