October 21st, 2017

New Hornady 6.5 PRC — Precision Rifle Cartridge

Hornady 6.5 PRC Precision Rifle Cartridge

Hornady has introduced a new Short Magnum cartridge, the 6.5 PRC (Precision Rifle Cartridge). This will be offered as factory ammo in both a “Match” version (with 147gr ELD) and a “Precision Hunter” version (with 143gr ELD-X bullet). Presumably, in the future, Hornady will offer 6.5 PRC brass separately for hand-loaders, but Hornady has no time-line for brass availability. However, you can get 6.5 PRC brass right now from GA Precision at $86.00 per 100 cases. GA Precision’s George Gardner, who helped develop this cartridge, has posted: “It’s a non-rebated short mag based on a short RCM [Ruger Compact Magnum] case. It has 3-4 grains less capacity than the 6.5 SAUM which nets about 30-50 fps deficit to the SAUM.”

The 6.5 PRC Match seems to be aimed at the PRS crowd and long-range tactical shooters. The product launch photo shows a tactical rifle and steel plate. Hornady says the 6.5 PRC was “designed to achieve the highest levels of accuracy, flat trajectory, and extended range performance in a sensibly-designed compact package. Utilizing moderate powder charges that result in repeatable accuracy, low recoil, and reasonable barrel life, the 6.5 PRC produces high velocities for target shooting with performance well beyond 1000 yards.”

“High Velocities”? Wait a minute — here’s the ballistics chart from Hornady’s 6.5 PRC page. It shows a muzzle velocity of 2910 FPS. That’s not much better than a 6.5 Creedmoor (which can push 140s over 2800 fps), so we wonder about this. You have to ask — what is the point? Is there anything this 6.5 PRC can do that the venerable 6.5-284 can’t do just as well or better — with a standard bolt face?

Hornady 6.5 PRC Precision Rifle Cartridge Hunter ELD-X

New 6.5 PRC Is a Short Magnum Requiring Magnum Bolt Face
Dubbed the “big brother” to the 6.5 Creedmoor, the 6.5 PRC fits in short or medium actions with a standard magnum bolt face (.532”). The case geometry features a long cartridge case neck and 30-degree case shoulder. It sort of looks like a 6.5 Creedmoor on steroids. For its loaded 6.5 PRC Match Ammo, Hornady is showing a 2910 fps Muzzle Velocity with the 147gr ELD Match bullet. That’s not very impressive. Why go to the trouble?

Comment — Does This New 6.5 PRC Cartridge Fill a Need?
Honestly, we don’t get this. If you need more speed than a 6.5 Creedmoor and want to stick with a .264-diameter bullet, then shoot a .260 Rem or 6.5-284 using a standard bolt. This requires a magnum bolt face. The 6.5-284 is a barrel burner; the 6.5 PRC promises to be likewise. On the other hand it may work better than a 6.5-284 in a short-action magazine — that may be what Hornady is thinking…

The 6.5 PRC clearly seems to be targeted at the PRS crowd. But we see many top PRS competitors moving DOWN in cartridge size, rather than up. Many PRS guys have stepped down from the 6.5 Creedmoor to the 6mm Creedmoor, or even a 6mm Dasher. The benefit is less recoil, and cheaper bullets. Are there really many PRS shooters clamoring for a short magnum? We don’t think so.

We’ll see if this new 6.5 PRC cartridge catches on — maybe some PRS guys will want this for long-range side matches. Rifle makers currently chambering the 6.5 PRC include GA Precision, Gunwerks, PROOF Research, Stuteville Precision and Seekins Precision.

6.5 PRC Ammunition for Hunters — Also New for 2018
Hornady will also sell a version of 6.5 PRC ammo design for hunters. The Precision Hunter version, shown below, is loaded with the 143-grain ELD-X Bullet. Again, however, we really don’t know why any hunter would want to shoot this cartridge, when you already have so many good choices, such as the 6.5x55mm Swede, and the original .284 Winchester, both of which can use a standard bolt face.

Hornady 6.5 PRC Precision Rifle Cartridge

If you have a hunting rifle with a magnum-size bolt, why not shoot the 7mm RSAUM or 7mm WSM? Barrel life is not really an issue for hunters, so the smaller case capacity of the 6.5 PRC is not really an advantage. Perhaps the veteran hunters among our readers can enlighten us, using the comments section. Would you build a hunting rifle chambered for the 6.5 PRC?