MasterPiece Arms (MPA) has a new chassis system — the “MPA Matrix”. Derived from the MPA BA Chassis, the MPA Matrix Chassis offers a “multitude of configurations in grips, thumb rests, and trigger finger supports”. MPA claims the grip and hand area has over 100 different variations. The MPA Matrix has a fore-end two inches longer than the standard BA or BA Competition Chassis. Overall, the Matrix is fairly heavy, at 6.4 pounds, and pretty expensive, with a $1250-$1450 MSRP (depending on options). By contrast the MPA BA Hybrid Chassis costs $925.00 and weighs 3.5 pounds (without recoil pad).
CLICK Image for large MPA Matrix Photo:
There are significant design differences between the MPA Matrix and MPA BA Hybrid (below). The Matrix, at 6.4 pounds, is also much heavier than the 3.5-lb BA Hybrid. Given that many PRS/NRL competitors favor heavier rifles for greater stability (and less felt recoil), the Matrix’s extra mass is probably a good thing.
The MPA Matrix features five different grip options (3 swept and 2 vertical), three different thumb-rest designs and four different trigger finger supports. That’s great for shooters who like to keep their thumb forward on the bolt side of the action. However, looking at the chassis, we’re really not sure we like the way the Matrix encircles the grip area. You’ve got hard metal behind the grip. The Matrix appears set up for resting the thumb of the trigger hand alongside the action. That can work for sure, but we think some shooters will prefer a more conventional vertical grip you can wrap your thumb around. A conventional grip will also have recoil cushioning for the web of the hand. See the BA Hybrid chassis for comparison. This Matrix is really VERY different in the grip area. But if you don’t like the Matrix, there are certainly other stock options available.
The new Matrix Chassis is designed for Remington Short Actions and Rem clones. The Matrix does offer good adjustability — the buttstock has an adjustable cheek riser and length of pull adjusts from 13.5 to 14.75 inches. Plus, the recoil pad adjusts for height and cant. You can get either an adjustable rear monopod or a bag-rider configuration. As you’d expect, the MPA Matrix has M-LOK slots along the fore-end sides and barricade stop holes along the bottom.
What was the concept behind the Matrix chassis? MPA’s President, Phil Cashin, states: “One of the things that we have seen in precision rifle shooting over the past couple of years is how many different methods a shooter used to engage a stock or chassis. Due to variations in hand size, finger thickness and length, as well as shooter preference on how they want to engage the chassis or stock, we’ve seen a lot of inconsistencies among the shooters in how they engage the rifle and where they position the pad of the trigger finger with the shoe of the trigger. This inspired us to create a system that would provide a more custom fit procedure for our customers by creating a chassis with more customized configurations.”
The MPA Matrix Chassis (MSRP $1250-$1450) is available in eight Cerakote colors: Graphite Black, Flat Dark Earth, Burnt Bronze, Tungsten, Gunmetal, Sniper Green, NRA Blue, and USMC Red. Custom H Series Cerakote colors are an additional $135, while camo patterns are $450 extra.
How is a modern, metal-chassis rifle built? This very cool video from Masterpiece Arms answers that question. The nicely-edited video shows the creation of a Masterpiece Arms tactical rifle from start to finish. All aspects of the manufacturing process are illustrated: 3D CAD modeling, CNC milling of the chassis, barrel threading/contouring, chamber-reaming, barrel lapping, laser engraving, and stock coating. If you love to see machines at work, you will enjoy this video…
The National Rifle League (NRL) started off sponsoring major centerfire tactical matches, similar to PRS competitions. That proved successful and the NRL added a .22 LR Rimfire series, called NRL22. The NRL22 rimfire discipline has been a success, as rimfire guns are fun to shoot and ammo is very affordable. The most popular NRL22 matches have drawn up to 150 rimfire competitors. Get more info at NRL22.org.
NRL22 is a great way to get into competition shooting with minimal expense. There are Five (5) classes: Open, Base, Ladies, Young Guns (8-16), and Air Rifle. Base Class is for the budget-minded shooter — the combined MSRP of Rifle and Optic may not exceed $1050.00 (so you could spend $550 on a rifle and $500 on a scope for example). That keeps the sport affordable. Open, Youth, and Ladies Classes have no price limits on Rifle and Optic. Visit NRL22.org to find an NRL22 match near you.
The two videos above from Long Range Shooters of Utah feature footage from the January 2019 course of fire from the NRL22 Rimfire Competition Series. Note the snow-capped hills in the lower video. Useful commentary explains how competitors establish their shooting positions.
NRL22 Publishes Monthly Courses of Fire
This video from a Utah NRL22 Match features shooters from each of the four rimfire classes. With the NRL22 program, scores from from local matches like this are ranked against scores from other matches nationwide. In advance of match dates, NRL22.org publishes 5 courses of fire to be used in that month. Each course of fire will always include 2 prone stages, 1 positional, 1 barricade, and a fifth that can be any of those. Details of the course of fire, including target distances, target sizes, time limits, and barricade profiles, are listed at NRL22.org.
Official NRL22 Rimfire Steel Target Package
This video reviews the official NRL22 Rimfire Steel Target Kit. Crafted by JC Steel Targets from AR500 steel, this kit from JC Steel Targets includes 8 hanging targets, 4 KYL (Know Your Limits) targets, plus all needed Hangers. That’s lot of steel and hardware for $329.99.
About NRL22 Tactical/Practical Competition The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
Practical/Tactical fans, mark your calendars. The Precision Rifle EXPO is back for its second year, running September 28-29, 2019 at the Arena Training Facility in Blakely, Georgia. Last year, over 800 attendees came to the two-day event. This year, manufacturers will be showing off actions, optics, ammo, reloading equipment, stocks, chassis, electronics, supporting equipment (bags and tripods), rifles, triggers, suppressors, and much more. There will be training sessions on precision handloading, wind reading, marksmanship, ballistic devices, and introduction to competition.
Video Shows Arena Training Facility And EXPO Live-Fire Demos
The event lets precision rifle enthusiasts connect with top manufacturers, rifle instructors, and leading tactical competitors. You can Pre-Register for $35, or pay $50 at the door Sept. 28-29. Registration includes access to the exhibition tent and the range locations, plus the educational classes for both days.
All Types of Products Will Be on Display
The 2019 Precision Rifle EXPO will present products from dozens of top companies all in one place. This year over 50 companies will be at the EXPO, displaying complete rifles, actions, triggers, stocks, optics, reloading gear, ammo, electronics, rangefinders, chronographs, ear protection, support bags, bipods, tripods, and all manner of accessories.
Video Showcases Last Year’s Precision Rifle EXPO:
Precision Rifle EXPO 2019 Exhibitor List
At the 2019 EXPO, there will be over 50 Exhibitors. On hand will be leading rifle-makers along with producers of chassis, optics, barrels, and stocks. There will also be specialty manufacturers such as AMP Annealing, Kestrel, and Magnetospeed. And the Capstone Group will be there with Berger Bullets, Lapua Brass/Ammo, SK Ammo, and Vihtavuori Powder.
Accurate Ordnance
Alpha Munitions
Annealing Made Perfect AMP
Applied Ballistics
Area 419
Armageddon Gear
Army Sniper Assoc.
Atlas Bipod/AccuShot
BadRock
Barrett
Beretta
Bergara
Berger Bullets
Bore Tech
BraceBuilt
Burris
Cole-TAC
Daniel Defense
Defiance
Devil Dog Arms
Federal
Helix 6 Precision
ISC
Kahles
Kestrel
KG Mada
Kiote
Knights Armament
Lapua
Arena Training Facility — 2300 Acres with Ranges out to 2100m
The 2300-acre Arena Training Facility is a premier shooting facility with multiple shooting ranges from 50m to 2100m. Arena’s 1000-yard covered Known Distance range offers multiple benches, steel and paper targets out to 1000 yards. On Arena’s UKD (unknown distance) range shooters can engage steel out to 2300 yards. This 2100m UKD range boasts a 3-Story Shooting Tower, Air-Conditioned Shoot House, and multiple Positional Challenges.
At last year’s EXPO, Long-Range Clinics were held on the 1000-yard Range:
The Arena Training Facility is located approximately two hours from the Hartsfield Airport in Atlanta, Georgia and is centrally located in the Southeastern USA.
The New 6GT Cartridge for Precision Rifle Competition
Report by Vu Pham
Earlier this year I was ready to build a 6 Dasher when I saw a lot of buzz on the interwebs about a new caliber George Gardner (Owner of GA Precision) and Tom Jacobs (Owner of Vapor Trail Bullets) designed, the 6GT. After some research and talking to George, I ditched the 6mm Dasher build and had GA Precision build me a 6GT on a GAP Templar action I already had in the safe. The reasons to try the 6GT in a new PRS-style rig were as follows:
1. Push a 110-115 grain class bullet at 2880-2930 FPS safely in the Sacramento heat.
2. Achieve a load that is reliable and predictable. The caliber must be easy-to-tune and predictable from barrel to barrel. I don’t want to spend weeks developing a new load each time I spin on a fresh barrel.
3. Be able to run the same mag in all my guns without having to tweak or use mag kits. The round must feed from AICS and AW magazines without major tweaking or hiccups.
4. Get good barrel life. The barrel needs to go 2200-2500 rounds with match-grade reliability and accuracy.
5. Have a competitive cartridge with the least possible recoil without sacrificing too much performance down range, compared to bigger options like the 6mm Creedmoor.
6GT feeding from un-modified magazines has been flawless in all the rifles we tested. The 6GT feeds so well, I sometimes have to do a press check to ensure there is a round in the chamber.
On paper the 6GT seemed like the perfect cartridge for PRS- and NRL-style competition. It has the low recoil of a 6 Dasher, with good feeding and mag compatibility. With the 6GT, a competitor can push 105gr bullets at 3000+ FPS or run heavier bullets at 2800-2900+ FPS.
Knowing that I would initially have to make my own 6GT brass and do quite a bit of load development, I enlisted the help of Dan Bertocchini with CS Tactical. Dan has a lot more experience with wildcats and is the man when it comes to this type of data gathering. He has been running a 6 Dasher for a few years so I was curious how he would compare the 6GT to his 6 Dasher.
Quick Summary: “I am really digging the 6GT and the capabilities it offers. It can launch 103gr Vapor Trails at 3000+ FPS or lob heavy 115gr DTACs in the low-to-mid 2900s comfortably. I think we will see this cartridge go mainstream in PRS/NRL-style competition in 2020.” — Vu Pham
The new 6GT Cartridge Was Tested in Three (3) Tactical Rifles:
Rifle 1: Vu’s 6GT 1.0
Builder: GA Precision
Action: Left Hand GAP Templar (large firing pin)
Barrel: Bartlein 7.7 Twist finished at 26″ with a 419 Hellfire Brake
Stock: KMW Sentinel
Optic: Vortex Razor Gen II 4.5-27x56mm EBR-7C MRAD
Bi-Pod: Harris
Trigger: Timney Calvin Elite
Magazines: AICS and AW
Support Bag: Wiebad Fortune Cookie
Rifle 2: Vu’s 6GT 2.0
Builder: Rubicon Precision
Action: Impact Precision 737
Barrel: Bartlein 7.0 Twist finished at 27″ with a 419 Hellfire Brake
Stock: XLR Industries Envy Chassis
Optic: Vortex Razor Gen II 4.5-27x56mm EBR-7C MRAD
Bi-Pod: Harris with Henderson Arca adapter
Trigger: Trigger Tech Diamond
Magazines: AICS and AW
Support Bag: Wiebad Fortune Cookie
Rifle 3: Dan’s 6GT
Builder: CS Tactical
Chambered by: Rubicon Precision
Action: Lone Peak Arms Fusion
Barrel: Proof 7.0 Twist finished at 28″ with a Muzzle Brake and More Brake
Stock: XLR Industries Envy Chassis
Optic: Minox ZP5 5-25x56mm MR4
Bi-Pod: Arca Cyke Pod (PRS)
Trigger: Trigger Tech Diamond
Magazines: MDT
Support Bag: Armageddon Gear OG Game Changer, Waxed Canvas
Alpha Munitions Pre-Production 6GT Brass George Gardner was kind enough to send us 50 pieces of Pre-Production Alpha 6GT brass for preliminary testing. Like the cases I formed from 6.5×47 Lapua brass, the Alpha 6GT brass will use a small rifle primer. Price from Alpha Munitions should be $1.15 per case, which is on par with Alphan’s other product line.
The first 7000 pieces of Alpha 6GT brass sold before I could even get my hands on any! The bigger batch of production brass is due later this year. To pre-order the brass, CLICK HERE.
The major difference between 6.5×47 Lapua-formed brass and Alpha 6GT brass is the case capacity. Alpha 6GT brass has 1.5 to 1.7 grains more case capacity. When a piece of 6.5×47 Lapua brass is formed into a 6GT, the walls of the case now become the shoulder and part of the neck. In a normal piece of brass, the shoulder and neck are typically thinner because of the thickness of the brass tapering from the body to neck.
While the cartridge design was optimized for Hodgdon Varget, the extra case capacity of the Alpha 6GT brass opens the door to Hodgdon H4350 (my favorite powder) and Alliant Reloder 16.
Test Results with Alpha Munitions 6GT Brass
Initial test results were as expected from a premium brass-maker. Dan and I both got excellent Standard Deviations and Extreme Spreads over my MagnetoSpeed V3 and his LabRadar. This string below was with 112gr Barnes Match Burners and 33.8 grains of Varget. Can’t complain about a 3 FPS Extreme Spread!
Yes, H4350 Works with the Alpha Munitions Brass
Personally, I prefer running Alpha 6GT brass with H4350 rather than Varget pushing a heavier bullet. H4350 burns slower and cleaner which should equate to better barrel life. The Lapua-formed 6GT cases just do not have the capacity to reach the cartridge’s full capability with the slower burning powders.
Is the 6GT cartridge accurate? Definitely. Here is a 5-shot group at 600 yards shot by Dan. This was Alpha 6GT brass, with Hodgdon H4350 pushing Barnes 112gr Match Burner bullets.
And here is a 4-shot, 600-yard group with reformed 6.5×47 Lapua brass, using Varget powder under a Barnes 112gr Match Burner.
6GT Stress Test — Don’t Try this at Home!
Dan and I also did a “destruction test” to see how the Alpha 6GT brass would hold up when competitors push the cartridge to its limits. Please note that this is PRE-PRODUCTION brass and Dan and I probably exceeded max load for the majority of the duration of this test. Using Varget powder, we pushed 115gr DTACs at 2950+ FPS on a pretty hot day. We ran the charge weight up until the bolt was hard to lift.
Using this very hot charge, we were able to get 14 firings before the primer pocket failed. That is pretty solid considering that this brass was a pre-production sample that Alpha said did not meet its primer pocket design requirements. With these results, I think a shooter pushing 110-115 grain class bullets in the low 2900s will get 16 to 20 firings from a piece of brass.
Is the GT here to stay?
All signs are pointing to “Yes”. Dies are readily available from Hornady, RCBS, and Redding. Chamber reamers are being produced by PT&G and JGS that can be purchased through GA Precision.
Alpha Munitions is hard at work getting quality brass to the shooters. Quite a few people have already chambered up 6GT barrels before they even have brass in hand. I think we will see this cartridge go mainstream in PRS/NRL-style competition in 2020. With Alpha Munitions production brass almost ready to hit the shelves, I think we will see a lot more data come in from the field by the end of this year.
The Verdict — The 6GT Is Looking Great So Far
I am really digging the 6GT and the capabilities it offers. It can launch 103gr Vapor Trails at 3000+ FPS or lob heavy 115gr DTACs in the low to mid 2900s comfortably. George Gardner has texted me some pictures of very impressive groups pushing an 115gr DTAC at 3000 FPS with Alliant Reloder 16 (a very temp-stable powder with a burn rate close to H4350). That being said, if a guy wanted to push that type of speed and bullet weight, the 6mm Creedmoor is a better solution in my opinion. So far my “go to” 6GT load is a 112gr Barnes Match Burner at 2900 FPS. My other favorite load is a Hornady 108gr ELDM at 2970 FPS.
I think the down-range performance of the 6GT over a 6mmBR and the 6BR variants will be valuable on those days where shooting conditions are not as perfect. Recoil is about the same as the 6BR variants (6BRA, 6 Dasher etc.), but noticeably less than a 6mm Creedmoor. The extra energy down range will make a spotter’s job a bit easier when targets extend beyond 800 yards.
Forming GT Brass from Lapua 6.5×47
Before the new Alpha Munitions brass was available, I tested the cartridge using 6GT made from parent Lapua 6.5×47 Lapua brass necked-down and reformed. George Gardner walked me through the process of forming 6GT brass out of Lapua 6.5x47L. The process is time-consuming and is a huge PITA even with the correct tools. More detailed instructions can be found on my 6GT thread on the AccurateShooter Forum. READ Forum Thread HERE.
Here is a photo of what the brass looks like going through the forming/trimming process.
Left to right: 6.5×47 Lapua brass, sized with the 6GT bushing die with a .266 bushing, chopped/trimmed and turned, and fired-formed.
The formed-from-Lapua 6GT brass performed well and is a good option if one has the time and desire, but I’ll be moving over to factory Alpha Munitions brass once it is readily available.
6GT Tested at 1000 Yards
After seeing what Tom Jacobs is doing with his benchrest gun running Alpha Munitions brass, there is no doubt the 6GT is plenty capable out to 1000 yards and beyond. I have a feeling the Benchrest and F-Open guys are going to dig this new 6mm cartridge as well, at least for 600 yards. Note, in this photo it appears Shot #5 is under a paster, but that might just be a Ballistic-X software input error, meaning that this is actually a 4-shot group. Either way it is still impressive.
The Vanquish Pro ($109.99 on Amazon) has BlueTooth. The basic model does NOT have Bluetooth.
Many readers use electronic muffs during matches so they can hear range commands. The Howard Light Impact Sport muffs are popular and affordable at around $53.00 on Amazon. Now there is a new alternative from Bushnell/Champion — the Vanquish Series electronic muffs. These feature ultra-fast under 1 millisecond sound compression with HD speakers. The Vanquish Pro and Pro Elite models offer Bluetooth connectivity, so users can take phone calls or listen to music at the range. The Elite models also offer Active Noise Cancellation (ANC). On all Vanquish models, the earpads are a nice soft foam for comfort, and the shell design is angled at the rear to provide more clearance on gunstocks. That’s smart.
Vanquish Muffs Offer Ultra-Fast Reaction Time with less than 1 millisecond Sound Compression:
So far, Vanquish muff users have been impressed. Audio quality is good. The 3X sound amplification on the basic model ($54.00 on Amazon) provides ample volume for conversations (Pro Model goes up to 5X). The ear foam is soft for all-day comfort. Top PRS competitor Bryan Sikes states: “Been a big fan of these new muffs for a while. been using the Vanquish Pros and it’s nice to listen to some Taylor Swift via Bluetooth or take a call if I need to when denting primers. Comfortable and less than half the cost of Sordins.”
Consider Running Plugs Under Muffs
The basic Vanquish Muffs have a 22 NRR (Noise Reduction Rating), same as the Howard Leight Impact Pros. That’s not enough, in our opinion, for sustained multi-hour exposure to firearm noises, particular indoors, or outdoors on a busy firing line. The Vanquish Pro ($109.99 on Amazon) has a better 24 NRR, but we would still recommend using ear-plugs under the muffs, for superior noise reduction. We like the Howard Leight MAX-1 plugs, which offer 33db NRR by themselves.
Do you like the Chris Byrne bench at left? For more details, CLICK HERE.
FREE Bench Plans on the Web
Building your own portable shooting bench is a great do-it-yourself project. You can build a sturdy bench for well under $100 in materials. Compare that to some deluxe factory-built benches which may cost $600.00 or more. You’ll find a wide assortment of home-built shooting bench designs (both portable and fixed) on the internet. Renovation Headquarters has links to FREE Plans and building instructions for fourteen (14) different shooting benches. There are all-wood shooting bench designs as well as benches that combine a wood top with a metal sub-frame or legs.
Heavy Wood Bench That Converts to Three Sections for Transport
In addition to the fourteen benches mentioned above, here is an interesting break-down bench design. Call it a “semi-portable” bench. The legs and frame are made from stout 4×4 post segments so the bench is fairly heavy. However, this bench can break down into three (3) sections for easier transport to and from the range. Dado-cut channels assure proper top alignment. This might be a good choice if you plan a multi-day excursion to a location without fixed benches. This three-leg bench design can be made from easy-to-locate materials. Note: The dimensions of this bench are are larger than typical fixed benches to accommodate 50 BMGs and other big rifles. CLICK HERE for more details.
Here’s our friend Jim See, who won the 2015 Heatstroke Open, topping 120 other shooters.
The 2019 Heatstroke Open will be held July 19-21 near Camargo in NW Oklahoma. This major PRS match should attract 120+ competitors. The event schedule includes check-in and sight-in beginning at noon on Friday, July 19, followed by side matches. The two-day match begins on Saturday and concludes at the end of the shooting session on Sunday. An awards ceremony in town will conclude the event.
The Heatstroke Open is one of the longest-running Practical Precision matches in the country. This match venue is a natural terrain field with just a few man-made props. Many targets are tough while other are more-than-generous. Stage time-limits are enough to get all rounds off on each stage. No matter what the shooter’s experience level, this match should be challenging and rewarding. But note, wind reading is critical — conditions have been known to be pretty brutal. Here are three videos covering the last three Heatstroke Open Events in Oklahoma:
2017 Heatstroke Open
2016 Heatstroke Open
2015 Heatstroke Open
McMillan — Heatstroke Open Key Sponsor McMillan Fiberglass Stocks is sponsoring this year’s Heatstroke Open as well as other events on the National Rifle League’s event roster. Through sponsorship, McMillan works to promote the NRL’s mission to encourage the growth and education of precision rifle shooting. CLICK HERE for complete listing of 2019 NRL-sanctioned matches.
Remaining Major 2019 NRL matches, and Match Directors: Heatstroke Open – Camargo, Oklahoma, July 20-21, 2019 | Matt Clem, B.J. Bailey Rock Lake NRL Steel Challenge – Cheney, Washington. Aug. 31-Sept. 1, 2019 | Doug Glorfield Monster Lake Mayhem – Cody, Wyoming, September 27-28, 2019 | Phillip Velayo, Caylen Wojcik West Coast Showdown – Pala, California, October 19-20, 2019 | Jorge Ortiz, Scott Satterlee 2019 NRL Championship – Navasota, Texas December 6 – 8, 2019 | Dave Ferguson, Prentice Wink
Look carefully at this Colorado double rainbow. Note that the color spectra are reversed — sort of a mirror image. This is true of ALL double rainbows.
A great practical/tactical shooting match is happening this weekend in scenic Colorado. The High Country Precison Mile-High Shootout will be held July 12-14 at the Rio Ro Mo Ranch outside of Craig, Colorado. The match will include a mix of long-range and positional shooting on natural terrain. A 200- to 250-round course of fire can be expected for the competition.
The Mile-High Shootout starts on Friday, July 12 with check-in and open targets out to 1,300 yards. Saturday will be an all-day match. Sunday, the competition shooting will conclude mid-day, followed by an awards ceremony after lunch.
McMillan Fiberglass Stocks will co-sponsor the Mile-High Shootout, the 12th match of the 2019 National Rifle League series. McMillan supports the National Rifle League in the goal of expanding practical rifle competition. McMillan notes: “Events such as these are important to help bring new shooters into the long-range shooting sports and are activities that are enjoyed by the entire family.”
This 2018 Mile-High Shootout Teaser Is Really Worth Watching — Plenty of Action!
South Dakota Steel Classic, August 16-18
Another great NRL Match is set for mid-August in South Dakota. The 2-day South Dakota Steel Classic will take place August 16-18, 2019 in St. Orient, South Dakota. This is a very popular match, and all 110 competitor slots have sold out. But check with Match Director Michael Kane for last-minute openings.
The South Dakota Steel Classic features multi-position precision shooting with targets from 25-1300 yards. Nearly all of the shots are practical in nature having a hunting or military-type application. CLICK HERE to learn more about this major NRL match in August.
The National Rifle League (NRL) started off sponsoring major centerfire tactical matches, similar to PRS competitions. That proved successful and the NRL added a .22 LR Rimfire series, called NRL22. The NRL22 rimfire discipline has been a success, as rimfire guns are fun to shoot and ammo is very affordable. The most popular NRL22 matches have drawn up to 150 rimfire competitors.
With the success of the NRL22 series, the NRL is adding an Air Rifle class to NRL22 matches in the upcoming 2019/2010 competition season. NRL President Travis Ishida stated: “We are proud to now offer an Air Rifle classification to the monthly NRL22 matches that take place nationwide, and in several other countries.” The accuracy and performance of modern air rifles are impressive, so Ishida says it makes sense to “include them in the same Course of Fire” along with other NRL 22 Classes.
If the NRL’s Airgun class catches on, there may be a stand-alone NRL Airgun series in the future. Tyler Frehner, NRL’s Director of Match Operations stated. “If this class of shooters grows… the Air Rifle class will become a stand-alone entity; a future division of NRL.” Justin Jacobson of Utah Airguns added, “This is going to open the door for Airguns like never before. Finally, Airgun hobbyists everywhere can compete near their hometown in a similar format to rimfires with the NRL.”
About NRL22 Tactical/Practical Competition The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 currently has four classifications: Open, Base, Ladies, and Young Guns (8-16 age). Air Rifle will be the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significanct growth and is excited to welcome new members and clubs.
The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
George Gardner was kind enough to send us 50 pieces of Pre-Production Alpha 6GT brass for preliminary testing. Like the cases I formed from 6.5×47 Lapua brass, the Alpha 6GT brass will use a small rifle primer. Price from 
