Forum member Danny Reever and this Editor recently discussed how novice reloaders can struggle with the fine points of reloading, making errors in seating depth, bushing choice, or sizing their cases. We agreed that a good resource covering more than “Reloading Basics” is sorely needed. Danny reminded me that Glen Zediker’s excellent Handloading for Competition book has been available since 2002. Danny says this may still be the best guide in print for those getting started in precision reloading, though the book is not without flaws.
Danny observed: “I consider this still the best book out there on the subject. I’ve bought a lot of other books only to be sorely disappointed after spending $30-$40 of my hard-earned cash. This book is not one of those! I’ve read and re-read Zediker’s treatise at least four times and refer to it often for advice while reloading. My number one suggestion for those who buy the book is to sit down with a highlighter and read it cover to cover. It’s well-written with a bit of humor and it is not boring.”
Extremely comprehensive, Zediker’s book covers nearly all of the key factors involved in accurate reloading: case sorting, brass prep, load development, neck-sizing, full-length sizing, bushing selection/use, tool selection, priming, powder measurement, and bullet seating. The book also explains how to test and evaluate your ammo, and how to monitor and interpret pressure signs.
There are many “must-read” sections in Zediker’s book, according to Danny: “The section beginning on page 161 dealing with concentricity (and how to achieve it) is excellent. Likewise the Load Limits section discussing pressures offers very valuable advice and info. You should also read Zediker’s commentaries about load testing, powders (burn characterics etc.), and the effects of temperature.”
Zediker has conveniently provided a detailed summary of his book on the web, complete with table of contents, sample pages (PDF format), and dozens of illustrations. Shown above is just one small section that covers ejectors.
Overall, we recommend Glen Zediker’s Handloading for Competition, though the book definitely could use some updating. Danny says: “Plunk down the [money] and buy this book, you won’t be sorry.” Zediker’s book is available from Amazon.com ($30.25), Sinclair Int’l ($28.99), and Zediker Publishing ($34.95).
You can never be too safe when hand-loading your own ammunition. This helpful Brownells video outlines the Seven Fundamental Reloading Safety Tips. This is important information for novice hand-loaders and a good refresher for those with reloading experience!
Summary of the Seven Safety Tips:
1. Store your reloading supplies in a safe and dry location, away from children and away from any possible source of ignition. This includes keeping your powder and primers separate.
2. Get and use respected reloading manuals, especially for new cartridges. Start low and work up slowly while watching for warning signs of pressure and/or case fatigue.
3. Locate your reloading activity where you will not be distracted. If you get interrupted, stop. (Distractions will eventually lead to mistakes.)
4. Do NOT mix powders. Keep your powders clearly marked and dated. You can use masking tape to write the date on the container.
5. If you load the same cartridge type for different firearms, make sure your ammo headspaces properly in each gun.
6. Check cases frequently. Look for split necks, case head separation or other signs of fatigue and excessive pressure.
7. If reloading military brass, be aware that case capacity is usually reduced, and initial loads should be at least 10-15% lower than published data.
Here are some other tips that will help your avoid making costly mistakes (such as using the wrong powder, or undercharging a case):
Powder Type — Always double-check the label on your powder containers. After placing powder in the powder measure, put a piece of tape on the measure with the powder type written on it. Some guys write the powder type on a card and place that right in the hopper.
Scale Drift — Electronic balances can drift. If you are using a digital powder scale, calibrate the scale with a test weight every 50 rounds or so.
Case Fill — If you throw more than one charge at a time, look INSIDE every case before seating a bullet. Squib charges can be dangerous if you don’t notice them before firing the next round.
Progressive Presses — When using a progressive press, consider using an RCBS Lock-Out Die. This will detect a low charge and stop the machine. These dies will work with RCBS, Hornady, and Dillon progressives.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
The RCBS Rock Chucker remains a classic — a big, strong, versatile press that can handle most reloading chores with ease. And now you can get a genuine Rock Chucker Supreme for $126.99 — a very good deal. The Rock Chucker offers plenty of leverage for case-sizing and the “O” is tall enough for long cartridges. The Rock Chucker has a very strong base and should last a lifetime. We’re not fans of the Rock Chucker’s priming system but most serious reloaders use a separate priming tool.
2. Midsouth — 17 HMR V-Max Ammo, $10.45 for 50 rds
Need 17 HMR ammo for your varmint safaris? Then grab this Hornady V-Max ammo while you can at $10.45 for a 50-round box. This is a great price. Other vendors are selling the same Hornady ammo for as much as $15.00 per box. We’ve used this ammo and it was very accurate out of both semi-auto (Savage A17) and bolt-action (CZ 455) 17 HMR rifles.
3. Aero Precision — Upper and Lower Stripped Receivers, $189.99
If you want to build your own AR for varminting, self-defense, or competition, here is a great value for the basics. Right now Aero Precision is offering a combo set of AR15 Stripped Upper Receiver PLUS AR15 Gen 2 Stripped Lower Receiver all for $189.99 with free shipping. The upper and lower are both machined from from 7075-T6 aluminum forgings and have a tough, Cerakote finish. This upper/lower set features 0.250″ takedown pin holes and M4-style feedramps. Both upper and lower take standard AR15 components so you can choose from a wide selection of trigger groups.
The Jewell trigger is still probably the most commonly-used trigger in benchrest competition. Right now at Grafs.com you can get a Remington 700-compatible Jewell benchrest trigger for $179.99 — that’s $20.00 of the regular price. This single-stage trigger adjusts from 1 ounce to 3 ounces pull-weight, and has a crisp, precise release. This will fit Rem 700 actions as well as Rem-compatible custom actions. This trigger does NOT have a safety and it is NOT recommended for hunting applications. (Sale tip from EdLongrange.)
5. Cabelas — Howa 1500 Mini-Action in .223 Rem, $349.99
Here’s a good deal on a great little rifle. Right now at Cabela’s you can get the Howa 1500 Mini-Action in .223 Rem for just $349.99. That’s a bargain — other vendors are charging $500.00 or more for this rifle. The Howa 1500 Mini Action is nearly an inch shorter than a Rem 700 short action, making for a nice, compact carry-around varminter. Your Editor checked out the Howa Mini Action Rifle at SHOT Show. The bolt opens and closes VERY smoothly (way better than most mass-produced bolt guns). The two-stage HACT trigger is excellent — it’s plenty light, with a crisp release and no annoying spring-loaded blade in the middle.
If you shoot long range, you need a scope level. This Discovery scope level is fully CNC-machined to close tolerances for a good fit. It is available with three inner diameters to fit scopes with 1″, 30mm, or 34mm main tubes. The 1″ version is just $11.99 while the 30mm model is $13.95 and the large 34mm version is $15.95. You could easily pay $35.00 or more for a 30mm scope level. Purchasers have praised this product: 89% of verified buyers rated this five stars.
7. Eabco.com — Pillar-Bedded Laminated Stock for Savage
For a Savage-based general purpose rifle, this Laminated Thumbhole Savage Stock is a good choice, and a fine value at just $175.00 including installed pillars. (Most bargain-priced laminated stocks do NOT include pillars). This stock fits Savage actions with detachable magazines. There are four color options: Camo laminate (shown in photo), Brown Laminate, Gray Laminate, and walnut color.
8. RCBS — Buy Green, Get Green Rebate
RCBS is running a very attractive Rebate Program currently. If you spend $300.00 on qualifying products you get a $75.00 rebate. Spend $50 and get a $10.00 Rebate. This program is limited to one (1) rebate redemption per calendar year, with a maximum of $75.00. CLICK HERE for more information. NOTE: To qualify, you must supply completed RCBS rebate coupon, original UPC barcodes from package, and original cash register receipt and/or dated, itemized sales invoice.
Ever wondered what caused a particular bulge or marking on a case? And more importantly, does the issue make the case unsafe for further use? Sierra Bullets Ballistic Technician Duane Siercks offers some insight into various issues and their causes in this article from the Sierra Blog.
Diagnosing Problems with Cartridge Brass
by Duane Siercks, Sierra Bullets
I was handed a small sample of .223 Rem cases the other day and was asked if I could comment on some marks and appearances that had been noticed as they were sorting through the cases. I will share what was observed and give you what would seem to be a cause for them. These were from an unknown source, so I have no way of knowing what type of firearm they were fired in or if they were factory loaded or reloaded ammunition.
Example ONE: Lake City 5.56, Unknown Year
Case #1 was seen to have a very rounded shoulder and split. Upon first look it was obvious that this round had been a victim of excess pressure. The firearm (perhaps an AR?) was apparently not in full battery, or there was possibly a headspace issue also. While taking a closer look, the primer was very flat and the outside radius of the primer cup had been lost. High pressure! Then I also noticed that there was an ejector mark on the case rim. This is most certainly an incident of excessive pressure. This case is ruined and should be discarded. See photo below.
Example TWO: Lake City Match 1993
Case #2 appears very normal. There was some question about marks seen on the primer. The primer is not overly flattened and is typical for a safe maximum load. There is a small amount of cratering seen here. This can be caused by a couple of situations.
Cratering is often referred to as a sign of excess pressure. With safety in mind, this is probably something that should make one stop and really assess the situation. Being as there are no other signs of pressure seen with this case, I doubt that pressure was unsafe. That leads us to the next possibility. This can also be caused by the firing-pin hole in the bolt-face being a bit larger than the firing-pin, and allowing the primer to flow back into the firing-pin hole causing the crater seen here. This can happen even with less-than-max pressures, in fact it has been noted even at starting loads. Always question whether pressure is involved when you see a crater. In this situation, I lean toward a large firing-pin hole. This case should be safe to reload.
Example THREE: R-P .223 Remington
Case #3 appears normal with one exception. There are two rings seen about one half inch below the base of the shoulder. These rings are around the circumference of the case, one being quite pronounced, and the other being noticeably less.
As we do not know the origin of the firearm in which this case was fired, it does seem apparent that the chamber of the firearm possibly had a slight defect. It could have been that the reamer was damaged during the cutting of this chamber. I would suggest that the chamber did have a couple of grooves that imprinted onto the case upon firing. This firearm, while maybe not dangerous should be looked at by a competent gunsmith. In all likelihood, this case is still safe to use.
Example FOUR: R-P .223 Remington
Case #4 has no signs of excess pressure. There is a bulge in the case just ahead of the case head that some might be alarmed by. This bulge is more than likely caused by this case being fired in a firearm that had a chamber on the maximum side of S.A.A.M.I. specifications. There is actually no real issue with the case. Note that the primer would indicate this load was relatively mild on pressure.
If this case was reloaded and used in the same firearm numerous times there might be a concern about case head separation. If you were going to use this case to load in an AR, be sure to completely full-length re-size to avoid chambering difficulties. This case would be safe to reload.
It is very important to observe and inspect your cases before each reloading. After awhile it becomes second nature to notice the little things. Never get complacent as you become more familiar with the reloading process. If ever in doubt, call Sierra’s Techs at 1-800-223-8799.
Guys — honestly, if you do anything today on this site, watch this video. You won’t be disappointed. Guaranteed. This is a very informative (and surprisingly entertaining) video. Every serious hand-loader should watch this video to see how cartridge cases are made. Your Editor has watched the video 5 times now and I still find it fascinating. The camera work and editing are excellent — there are many close-ups revealing key processes such as annealing and head-stamping.
VERY Informative Video Show Cartridge Brass and Ammunition Production:
Norma has released a fascinating video showing how bullet, brass, and ammunition are produced at the Norma Precision AB factory which first opened in 1902. You can see how cartridges are made starting with brass disks, then formed into shape through a series of processes, including “hitting [the cup] with a 30-ton hammer”. After annealing (shown at 0:08″), samples from every batch of brass are analyzed (at multiple points along the case length) to check metal grain structure and hardness. Before packing, each case is visually inspected by a human being (3:27″ time-mark).
The video also shows how bullets are made from jackets and lead cores. Finally, you can watch the loading machines that fill cases with powder, seat the bullets, and then transport the loaded rounds to the packing system. In his enthusiasm, the reporter/narrator does sometimes confuse the term “bullets” and “rounds” (5:00″), but you can figure out what he means. We definitely recommend watching this video. It’s fascinating to see 110-year-old sorting devices on the assembly line right next to state-of-the art, digitally-controlled production machinery.
Video suggestions by Boyd Allen and EdLongrange. We welcome reader submissions.
The new 15th Edition of Cartridges of the World is slated for release on October 24th, 2016, but you can pre-order now via Amazon.com. This massive 680-page reference contains illustrations and basic load data for over 1500 cartridges. If you load for a wide variety of cartridges, or are a cartridge collector, this book is a “must-have” resource. The latest edition (release date 10/24/2016) includes 50 new cartridges and boasts 1500+ photos. This important reference guide can be pre-ordered now through Amazon.com for $21.20. Order now and you’ll get the new 15th Edition hot off the press.
Cartridges of the World, the most widely-read cartridge reference book, has been totally updated, with a newly expanded, full-color 64-page color section featuring essays from some of today’s most prominent gun writers. The 15th Edition of Cartridges of the World includes updated cartridge specs, plus essays by leading writers on the topics of SAAMI guidelines, wildcatting, and new cartridge design trends. In scope and level of detail, Cartridges of the World is the most complete cartridge reference guide in print.
Cartridges of the World by author Frank C. Barnes was first published in 1965. The 15th Edition is edited by W. Todd Woodard, Editor of Gun Tests magazine and author of several firearms reference books. Frank Barnes (1918-1992) began collecting information on handgun cartridges at the early age of 12, thanks to his father, a police officer. Frank Barnes was an innovative cartridge designer, who invented the original 308 x 1.5″ Barnes, predecessor of the 30BR case.
Before Frank began a law enforcement career, he was a college professor. Frank was also a pilot, and a race-car driver. Learn more about Cartridges of the World (15th Ed.) at www.gundigest.com.
Vihtavuori has updated and enhanced its reloading information, adding VV powder load recipes for many more cartridge types. Data is now online for 64 rifle cartridge types and 26 pistol cartridge types. You’ll find the updated reloading data on the Vihtavuori Website. Bookmark this link: www.vihtavuori.com/en/reloading-data/about-reloading.html.
The updated online information supplements the Vihtavuori Reloading Guide (2016 Edition) available in PDF format. The online Reloading Database has dedicated sections for Rifle Cartridges, Pistol Cartridges, and Cowboy Action. There is also a handy, FREE Reload Mobile App for iOS and Android.
Vihtavuori’s Rifle Reloading Database is now very comprehensive. Many of the popular modern match cartridges such as the 6.5×47 Lapua and 6.5 Creedmoor are now included, and of course you’ll find the 6mm PPC, 6mmBR, and 6XC. (There is no .284 Win or 7mm RSAUM data unfortunately.) You will find recommended load recipes for all the following cartridges:
.204 Ruger
.221 Remington Fireball
.222 Remington
.22 Hornet
.22 PPC-USA
.223 Remington
.22-250 Remington
.223 WSSM
.243 Winchester
.243 WSSM
6mm PPC-USA
6mmBR Norma
6 XC
6mm Remington
.240 Weatherby Magnum
6.5 Grendel
6.5 x 47 Lapua
6.5 Creedmoor
6,5 x 55 Swedish Mauser
6,5 x 55 Swedish Mauser/ SKAN
6.5-284 Norma
.25-06 Remington
.260 Remington
.270 Winchester
.270 WSM
.270 Weatherby Magnum
7 mm-08 Remington
7 x 57
7 x 64
7 mm Remington Magnum
7 mm WSM
7 mm RUM
7 x 57R
7 mm Weatherby Magnum
7,5 x 55 Swiss GP31
.30 Carbine
.30-30 Winchester
.300 AAC Blackout
7,62 x 39
.300 Savage
7,62 x 53R (7,62 Russian)
.308 Winchester
.30-06 Springfield
.300 Lapua Magnum
.300 Remington Ultra Magnum
.300 Winchester Magnum
.300 Weatherby Magnum
.30-.378 Weatherby Magnum
.300 H&H Magnum
.300 WSM
.303 British
8 x 57 IRS
8 x 57 IS (8 mm Mauser)
.338 Winchester Magnum
.338 Lapua Magnum
9,3 x 62
9,3 x 66 Sako
9,3 x 74R
.375 H&H Magnum
.416 Rigby
.444 Marlin
.45-70 Government
.458 Winchester Magnum
.50 Browning
.32 S&W Long N.P.
.32 S&W Long Wadcutter
.357 Remington Maximum
.357 Magnum
.357 SIG
.38 Super Lapua
.38 Super Auto
.38 Special
7 mm GJW
7 mm TCU
7 mm BR Remington
7,62 x 25 Tokarev
9 mm Luger
9 x 21
9 x 23 Winchester
.40 S&W
10 mm AUTO
.41 Remington Magnum
.44 S&W Special
.44 Remington Magnum
.45 ACP
.45 Colt
.45 Winchester Magnum
.454 Casull
.500 S&W Magnum
.50 AE
Story Tip by EdLongrange. We welcome reader submissions.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Stocky’s Stocks — Composite Stock with Bedding Block, $199.99
Here’s a killer deal on a versatile Stocky’s Long Range Stock with aluminum V-block bedding system. For just $199.99, order this for Rem/Rem Clone long actions or short actions, with either narrow or wide (varmint/tactical) barrel channel. This would be a good choice for a varmint rifle. This is also offered with a matte black, tan, or olive baked-on textured finish for $239.99.
2. Sportsmans — .45 ACP Ammo, 300 Rds $84.95 with Rebate
The .45 ACP is probably our favorite centerfire pistol cartridge. It is reliable, inherently accurate, and makes big, easy-to-see holes in paper. Here’s a good deal for .45 ACP shooters. Sportsmans Outdoor Superstore is selling 300 rounds of American Eagle .45 ACP 230gr FMJ ammo for $114.95 in a handy plastic ammo can. And with factory rebate, you can knock thirty bucks off that price. Through the end of 2016, Federal Ammunition is offering $30.00 cash back on this ammo. CLICK HERE for Rebate Form.
Fine Print: Maximum of $30.00 rebate. Purchase must be made before December 31, 2016. Coupon must be received by January 31, 2017. Consumer submits coupon with UPCs written and original cash register receipt and/or dated itemized sales invoice (photocopies not accepted). Please allow 6-8 weeks for delivery. Total redemptions limited to five (5) of each product per name, address and household.
3. Natchez — Special 5 Reloading Press Kit, $199.99
This is an excellent entry-level reloading kit, which is on sale for $199.99 at Natchez Shooters Supplies. We like the relatively compact Special 5 press for most reloading duties. Eventually you may want to add an additional, large heavy press, but this will get the job done. This kit includes an RCBS Powder Measure, Digital Scale, Powder Trickler, Hand Priming Tool, Load Manual, Loading Tray, and more. It’s hard to beat this combination of tools for under $200.00.
4. Southern Shooters — 17 HMR Ruger American Rimfire. $252.63
With ballistics far superior to a .22 LR, the 17 HMR is ideal for Prairie Dogs and small varmints out to 180 yards or so. Now you can get a reliable, name brand 17 HMR rifle for a very attractive price. That’s right, Southern Shooters is selling the 17 HMR Ruger American Rimfire, with 22″ barrel, for just $252.63. FFL required. For other vendors with this rifle, CLICK HERE.
5. Amazon — Lyman Case Prep Xpress $94.99
The Lyman Case Prep Xpress lets you chamfer inside and out, brush your necks, clean/uniform primer pockets, and ream military crimps. On sale at Amazon.com with $94.99 Prime pricing, this is a good deal. Lyman’s Case Prep Xpress sells elsewhere for $130.00 or more. Here is a review from a Verified Purchaser: “The unit is quiet, sturdy, and the attachments do what they are supposed to do. It already has made a difference in my reloading speed, and most importantly, my comfort. I highly recommend this unit.” (Strafer, 4/7/14)
6. Natchez Shooters Supply — 325 Rounds .22 LR Ammo, $22.99
This Federal .22 LR ammo is just 7 cents per round — the kind of pricing on bulk rimfire ammo we used to see in the “good old days”. Act quickly, this $22.99 Federal .22 LR Ammo deal won’t last long. Each box contains 325 rounds — enough ammo for many sessions at the range. The bullets are 40 grains, solid lead.
7. Sportsman’s Guide — Frankford Arsenal Case Tumbler Kit
For just $69.99, this Frankford Arsenal Kit provides everything you need to clean brass: Vibratory Tumbler, Rotary Media Separator, Bucket, Corn Cob Media (3 lbs.), and Brass Polish. The Case Tumbler holds up to 600 9mm cases or 350 .223 Rem cases. The separator system is generous, with a 3.5-gallon bucket. NOTE: Sportsman’s Guide Buyers Club members can purchase for $62.99.
8. Amazon — Neiko Digital Calipers, $17.74
Even if you have a good set of calipers, you may want to get one of these Neiko 01407A Digital Calipers. The #1 best-selling digital caliper on Amazon.com, this Neiko tool features a large LCD Screen and measures up to 6.0 inches. With over 2300 customer reviews, this product has earned an overall rating of 4.4 out of 5 stars. It’s hard to go wrong for $17.74, even if you just use these as a spare set for measuring group sizes and case trim lengths.
Coating bullets with a friction-reducing compound such as Molybdenum Disulfide (Moly) offers potential benefits, including reduced barrel heat, and being able to shoot longer strings of fire between bore cleanings. One of the effects of reduced friction can be the lessening of internal barrel pressures. This, in turn, means that coated bullets may run slower than naked bullets (with charges held equal). To restore velocities, shooters running coated bullets are inclined to “bump up” the load — but you need to be cautious.
Be Careful When Increasing Loads for Coated Bullets
We caution shooters that when your start out with coated bullets in a “fresh barrel” you should NOT immediately raise the charge weight. It may take a couple dozen coated rounds before the anti-friction coating is distributed through the bore, and you really start to see the reduced pressures. Some guys will automatically add a grain or so to recommended “naked” bullet charge weights when they shoot coated bullets. That’s a risky undertaking.
Instead we recommend that you use “naked” bullet loads for the first dozen coated rounds through a new barrel. Use a chronograph and monitor velocities. It may take up to 30 rounds before you see a reduction in velocity of 30-50 fps that indicates that your anti-friction coating is fully effective.
We have a friend who was recently testing moly-coated 6mm bullets in a 6-6.5×47. Moly had not been used in the barrel before. Our friend had added a grain to his “naked” bullet load, thinking that would compensate for the predicted lower pressures. What he found instead was that his loads were WAY too hot initially. It took 30+ moly-coated rounds through the bore before he saw his velocities drop — a sign that the pressure had lowered due to the moly. For the rounds fired before that point his pressures were too high, and he ended up tossing some expensive Lapua brass into the trash because the primer pockets had expanded excessively.
LESSON: Start low, even with coated bullets. Don’t increase your charge weights (over naked bullet loads) until you have clear evidence of lower pressure and reduced velocity.
Procedure After Barrel Cleaning
If you shoot Moly, and clean the barrel aggressively after a match, you may want to shoot a dozen coated “foulers” before starting your record string. Robert Whitley, who has used Moly in some of his rifles, tells us he liked to have 10-15 coated rounds through the bore before commencing record fire. In a “squeaky-clean” bore, you won’t get the full “benefits” of moly immediately.
To learn more about the properties of dry lubricants for bullets, read our Guide to Coating Bullets. This covers the three most popular bullet coatings: Molybdenum Disulfide (Moly), Tungsten Disulfide (WS2 or ‘Danzac’), and Hexagonal Boron Nitride (HBN). The article discusses the pros and cons of the different bullet coatings and offers step-by-step, illustrated instructions on how to coat your bullets using a tumbler.
At the request of our readers, we provide select “Deals of the Week”. Each week we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
LABOR DAY HOLIDAY SPECIALS
We are publishing our Deals on Sunday this week because many of the best bargains are Labor Day Weekend Specials. There are also Special 10% OFF PROMOTIONS running this weekend. We want readers to be able to take advantage of these holiday specials before the discount codes “time out”.
1. Brownells — Labor Day Weekend Sale & Free Shipping ($99+)
Brownells is offering great pricing on a host of products this weekend. You’ll find bargains on Berger Bullets, RCBS Rockchuckers, AR components, Timney Triggers, Magpul Stocks, Rimfire Ammo, Centerfire Ammo, Range Bags, and more. Plus all Geissele products are on sale this holiday weekend. In addition, with CODE L27 you can FREE Ground Shipping on orders over $99.00. This free shipping offer expires on 9/5/2016 at 11:59 PM CST. CLICK HERE for Labor Day Specials.
2. Amazon — Vortex 4-12x50mm AO Scope, $174.00
The NRA is introducing a new Mid-Range Tactical Prone Match for AR platform rifles with bipods. Optics up to 12X will be allowed. If you’re considering participating in this new Mid-Range competition, here’s a fine Vortex 4-12x50mm AO Crossfire II scope for under $175.00. That’s a steal. This second-focal-plane scope features front parallax adjustment and a BDC reticle. Put the money you save on optics into a premium barrel and quality match trigger.
3. Ammomen — Winchester .22 LR Ammo $15.50 for 235 Rounds
We are finally starting to see .22 LR rimfire ammo come down to very affordable levels. With this Winchester bulk pack special you get 235 rounds for just $15.50. That works out to just 6.6 cents per round (or $3.30 for 50 rounds). This .22 LR ammo is loaded with 36 grain copper-plated lead HP bullets. The ammo is rated at 1280 fps in rifles, 1085 fps in pistol.
4. Savage Arms — Rifle Rebates up to $75.00
With the Save on a Savage Rebate, you can get $75.00 on Savage Trophy Hunter, DOA Hunter, Model 14/114 or Model 16/116; or get $30.00 back on any AXIS or A17™ synthetic stock rifle. Shooters who purchase any bolt-action Savage rimfire, including the B.MAG and Rascal, will be eligible for a $25 mail-in rebate. Firearms must be purchased between August 11, 2016 and September 25, 2016. NOTE: This program also includes the popular semi-auto A17 17 HMR which was voted ‘Rifle of the Year’ by both NRA American Hunter and Guns & Ammo magazines. CLICK HERE for Rebate Coupon.
5. Cabelas — 10% Off Labor Day Special with Free Shipping
Act quickly guys, this Cabelas.com offer expires 9/5/16, at 11:59 pm Eastern Time. Throughout the Labor Day Weekend you can get 10% off most online merchandise, plus FREE Shipping for orders over $99.00. This includes ammo purchases, but not firearms. This is an online-only promotion, not valid at Cabela’s retail stores. Use Code 6TENOFF during online checkout. Some heavy or oversized items will require paid shipping and handling.
6. Amazon — Leight MAX NRR33 Earplugs, $7.50 for 50 Pairs
These Howard Leight NRR33 Max plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling and mowing lawns, I probably have Max plugs in my ears 2-3 days a week. This is a very good price for a bulk pack of 50 pairs. And if you act soon, you can get free shipping to boot.
7. Beretta USA — Labor Day Sale, Up to 60% Off
Beretta is offering big discounts — up to 60% Off — during its Labor Day Outlet Store Sale. You can save on shooting accessories, clothing, gun cases, holsters, gunstocks, choke tubes, barrels, scope rings, grips and much more. You’ll also find great deals on Tikka and Sako stocks (Beretta is the distributor for Tikka and Sako). For example, a high-grade Sako 75 Hunter DLX stock is marked down from $878.00 to $439.00. In addition, Beretta is offering Free Shipping on Orders over $89.00.
8. Precision Reloading — $15 Hazmat Fees on Powder and Primers
If you’re purchasing powder, primers and other Hazmat items, you can save up to $25.00 per order with this offer from our friends at Precision Reloading. Some vendors charge as much as $40.00 for Hazmat fees (on top of regular shipping). This fall Precision Reloading is lowering its Hazmat charge to just $15.00 per order. And yes, you can combine powder and primers in the same order. NOTE: Normal shipping charges apply, and total package weight may not exceed 70 pounds.
Forum member Danny Reever and this Editor recently discussed how novice reloaders can struggle with the fine points of reloading, making errors in seating depth, bushing choice, or sizing their cases. We agreed that a good resource covering more than “Reloading Basics” is sorely needed. Danny reminded me that Glen Zediker’s excellent Handloading for Competition book has been available since 2002. Danny says this may still be the best guide in print for those getting started in precision reloading, though the book is not without flaws.
Norma has released a fascinating video showing how bullet, brass, and ammunition are produced at the 
