|
|
January 18th, 2010
One gun, many calibers. That’s the concept behind Gary Eliseo’s new modular long action tube gun. By offering two different lower assemblies, along with swappable bolts and barrels, Gary’s versatile new RTM (Remington Tactical Modular) chassis can shoot a wide range of chamberings, from the midsize cartridges (such as 6XC) all the way up to the .338 Lapua Magnum. Eliseo’s RTM provides the tactical shooter with unrivaled versatility in a single package with consistent ergonomics and control function. You’ve heard the old adage, “beware the man with one gun.” Well that’s especially true if the one gun is built on the Eliseo RTM platform. To our knowledge, the RTM is first tube gun that can shoot everything from a 22-250 up to the .338 Lapua Mag. It’s a remarkable feat of engineering.
Gary provided this initial report: “I wanted to give Daily Bulletin readers a peek at the new RTM chassis I’ve been working on. Designed to accept the Remington 700 long actions or custom long action Rem clones, it will be available with two lower units. With the shorter lower, users can run short action cartridges like the 6-6.5×47, 6XC, 6.5 Creedmoor, 6.5×47 Lapua and .308 using AICS 5- or 10-round magazine. Or, with the longer lower (and a different barrel and bolt), you can shoot the .300 Win Mag up to the .338 Lapua Mag using AI 5-round single stack magazines.” Gary adds: “I’ve been working with John Pierce on this project — he’ll offer an action ‘package’ which will include a long action, two bolts, and even two barrels for those who want all the options.” Eliseo’s new RTM chassis comes equipped with an improved ambidextrous cheek piece, Gary’s new folding VRGS (vertical rear grip system), and a pair of quick detach sling swivel cups. For more information, visit CompetitionShootingStuff.com, or call Gary Eliseo at (714) 630-5734.
January 5th, 2010
New Remington Arms product videos, prepared for SHOT Show, have hit the internet. Featured in the videos are the Remington/Bushmaster Adaptive Combat Rifle (ACR) and the new Modular Sniper Rifle (MSR). Remington is hoping the U.S. Military will purchase large numbers of the new firearms, and Remington plans to sell, in the civilian market, a semi-auto version of the innovative ACR.
The ACR is based on the MagPul Masada prototype. It features a gas-piston upper, and quick-change barrel system. Initial tests demonstrated that the ACR offers a much higher MTBF (mean time between failure) rate than the M16-family of direct-gas-impingement rifles currently used by the military. The ACR also runs cleaner and cooler. Watch the video and you’ll see some amazing cut-away animations that show how the ACR’s internals work and how the barrel can be changed in seconds.
In the video below, Remington demonstrates the features of its new Modular Sniper Rifle (MSR). This rifle is Remington’s entry into the competition for the new SOCOM Precision Sniper Rifle (PSR). Big bucks are at stake. The SOCOM PSR contract is potentially a seven-figure deal for Remington.
The MSR features a beefy new titanium receiver with the ability to handle multiple chamberings up to .338 Lapua Magnum. The MSR was designed from the ground up as a switch-barrel rig, with a floating handguard, and folding, adjustable buttstock. The whole system is modular. By exchanging bolt-face, barrel, and magazine, the gun can switch from .308 Win (7.62×51), to 300 Win Mag, to .338 Norma Mag, and to .338 Lapua Mag.
January 1st, 2010
We know many readers took advantage of the recent CMP sales of Remington 40X rifles and barreled actions. And now many proud new 40X owners are looking for upgrades. A brand new, precision-machined bolt can improve both the accuracy and the reliability of rimfire rifles. For a limited time, Pacific Tool & Gauge (PT&G) is going to offer complete 40X rimfire bolt assemblies for under two hundred bucks.
Dave Kiff of PT&G recently told us: “After all the feedback we’ve received regarding the 40X Rimfire bolts, Pacific Tool & Gauge is going to run 250 pieces and is currently taking orders. To place your order, please give us a call at (541) 826-5808. If you place your order during the first run, the price for the complete bolt assembly (handle installed) is $199, but if you miss the first run, the price will be going up to $225.”
If you’re interested in adding a new, high-quality bolt to your 40X rimfire action, now’s the time to buy. We suspect PT&G will sell out on the initial order quickly.
December 18th, 2009
What may be the very first production, civilian Bushmaster Adaptive Combat Rifle (ACR) was presented to Florida shooter J. James, who was the winner of an Advanced Armament Corp. (AAC) silent auction for the rifle (with AAC silencer). AAC was recently acquired by Remington Arms Co. as a Cerberus Freedom group company, along with Bushmaster. That’s how AAC got its hands on the first civilian ACR. The upper receiver is stamped S/N GR00100 and “MODEL – BACR”. Interestingly, the rifle is also stamped “CALIBER – MULTI”. Everybody has been clamoring for photos of the actual production version of the ACR. Well, here they are.
James had the weapon professionally photographed, and posted the images on Photobucket.com and AR15.com.
Links to other photos:
Left Side | Right Side | Grip | Stocks | Gas Block | Lower with Fixed Stock | Lower and Fire Control Group | Barrel with Piston Kit
The new ACR features a 16″ barrel with m4 profile. A 4th Generation rail system offers removable Picatinny rails. James’ gun came with two (2) stocks, both the new-style, spring-lock folder and the fixed stock. The charging handle is ambi-dextrous and can be flipped left or right, as well as up and down. James reports that the ACR exhibits good fit and function. He says the trigger is “100% better than the SCAR” and is very crisp.
December 16th, 2009
 Here’s a nice early Christmas present for precision shooters. Quantities of CCI small and large rifle primers (including BR2 and BR4) have arrived at many of the more popular vendors. Wolf primers are in decent supply and we’re starting to see Remington primers on the shelves. Federal primers are still very hard to find. Shown below are some available rifle primer inventories as of December 16, 2009.
NOTE: Product availability and pricing subject to immediate change. If you need primers, act quickly — this stuff may all be gone in a couple days.
Powder Valley
CCI BR4 SMALL RIFLE BENCHREST primers — IN STOCK at $37.00 per 1000 primers
CCI 400 SMALL RIFLE primers — IN STOCK at $24.00 per 1000 primers
CCI 450 SMALL RIFLE primers — IN STOCK at $24.00 per 1000 primers
CCI BR2 LRG RIFLE BENCHREST primers — IN STOCK at $37.00 per 1000 primers
WOLF SMALL RIFLE MAGNUM primers — IN STOCK at $25.50 per 1000 primers
WOLF LARGE RIFLE PRIMERS — IN STOCK at $25.50 per 1000 primers
Grafs.com
CCI BR2 LRG RIFLE BENCHREST primers — IN STOCK at $202.00 per 5000 primers
Bruno Shooters Supply
CCI BR4 SMALL RIFLE BENCHREST primers — IN STOCK at $59.95 per 1000 primers
CCI 400 SMALL RIFLE primers — IN STOCK at $44.95 per 1000 primers
CCI 5.56 SMALL RIFLE primers — IN STOCK at $44.95 per 10000 primers
REM 9.5 LARGE RIFLE primers — IN STOCK at $44.96 per 1000 primers.
WOLF SMALL RIFLE MAGNUM primers — IN STOCK at $26.95 per 1000 primers
WOLF LARGE RIFLE PRIMERS are IN STOCK at $26.95 per 1000 primers
December 5th, 2009
 We have confirmed that Lapua will produce and distribute 22-250 cartridge brass starting in early 2010. The official product release will be at SHOT Show in Las Vegas (Jan. 19-22). We don’t have production samples yet, but there are about 1000 pieces of brass in the hands of testers in the United States at this time. This stuff is for real — CLICK THIS LINK for PHOTOS.
 One of the folks lucky enough to get his hands on the new Lapua 22-250 brass is writer/shooter Steven Boelter, author of the Rifleman’s Guide to Rimfire Ammunition. Steven has measured and inspected the new brass and he says it appears to be “on a par, quality-wise, with Lapua’s 220 Russian and 6BR brass”, which is saying a lot. Steve adds that: “[what I have] is in fact part of a pre-production run, and the main stuff will be ready for second quarter, 2010″. Steven is working on an article for Precision Shooting magazine that will include exact dimensions for the new brass, as well as initial load testing results. An exact release date for Steven’s article has not yet been set, but Boelter hopes the story will come out in January or February.
Boelter can’t say much more about the brass prior to publication of the article. But we can confirm that it has a large primer pocket, standard 22-250 rim size, and it is annealed like other premium Lapua brass. Steven has posted a couple photos of the brass on the Saubier.com web site.
We’re always excited when Lapua decides to expand its line of cartridge brass. For 22-250 shooters, who will now have a new ultra-high-quality brass option, the news of Lapua 22-250 brass must be like an early Christmas present.
Link to Lapua 22-250 Brass Photo
Above is a QuickDESIGN diagram of the 22-250 Remington cartridge based on CIP Metrics converted to English units. This is NOT the official print for the new Lapua 22-250 brass, which may vary slightly in dimensions. We suggest you get the actual production brass in hand before ordering new chamber reamers or dies.
December 3rd, 2009
The CMP (Civilian Marksmanship Program) Sales division has secured a limited supply of Remington Model 40X target rifles and 40X barreled actions. The rifles are single shot, bolt-action rifles returned to Army inventory by ROTC and JROTC units. What remains for sale are heavy-barreled target rifles with standard stocks (item R22M40XHB), plus 40X models with shortened stocks for juniors (item R22M40XHBSS). These rifles are missing the front and rear sights, handstops, slings, and the intermediate bases for mounting scopes. Otherwise, these rifles are complete and do function. Bases are present for the front and rear sights. The stocks have the typical dings, dents, gouges, and scratches, and may not be the original style with stocks possibly having aftermarket adjustable buttpads. In addition to the rifles, two kinds of 40X barreled actions are offered — either heavy barrel version or standard barrel. Prices start at $275.00 for item R22M40XBR, a stripped receiver and standard barrel (no other parts).
The Remington Model 40X is a single-shot, .22LR bolt-action rifle. Overall length is 46.5″, with a 28″, six-groove barrel (standard or heavy contour). The heavy barrel model has a barrel diameter at the muzzle of 7/8″ while the sporter model measures 3/4″ at the muzzle. All of these rifles are returns from JROTC and have been in use for decades. NOTE: Rifles are sold without sights. A limited number of sights are available (while quantities last) on the CMP Estore; click on the Part Surplus tab.
Estore Reservation Required Prior to Purchase
To order a surplus Remington 40X rifle or barreled receiver you must first reserve the item through the CMP’s Estore. Once you place this order your rifle will be reserved for the next 14 days — pending CMP receipt of your hard copy order and CMP eligibility verification. If you satisfy the eligibility requirements, you will receive a confirmation email. The Rem 40X rifles are listed under the Rifles Surplus tab. To place a reservation you must login with your CMP Estore ID or otherwise create a new account at https://estore.odcmp.com/Store/login/login.aspx.
Credit Forum Member Gary Wood for finding this Rem 40X sale opportunity. Thanks Gary!
November 21st, 2009
 Remington Arms Co. plans to start selling handguns, perhaps as early as the first quarter of 2010. In his Shooting Wire website, Jim Shepherd has confirmed that Remington is planning to build and market handguns, including a 1911 type semi-auto pistol. Remington recently named Tom Taylor as its new Senior VP for Handgun Marketing and Products. Taylor, formerly Vice-President of Marketing for Smith & Wesson, was hired for his handgun industry expertise.
Remington May Acquire Handgun Maker
Shepherd reports that Remington is seeking to acquire an existing handgun manufacturer, although it appears that Remington’s first new pistols will be developed and produced in-house. Shepherd writes: “it has been no secret in the industry that Remington has been ‘shopping’ for a handgun company. Several names have been mentioned, but it appears the first product will be ‘organic’ coming from inside Remington, rather than via acquisition. A 1911 is in first-production testing, and may be ready for introduction at SHOT Show in January”. Shepherd cautions, however, that Remington may move back the launch of its 1911 pistol to ensure all the bugs are worked out, and that the product is 100% reliable.
Will Remington Revive Older Designs?
Though Remington is now best known for its long-guns, it does have a rich heritage of pistol-making, going all the way back to the early 1800s. In the Civil War, Remington & Son percussion revolvers were often used by Union calvarymen, many of whom preferred the Remingtons over the standard issue Model 1860 Colt revolver. Remington also produced popular semi-auto pistols in the first half of the twentieth century. Shepherd speculates that “the small, reliable Model 51 might be a candidate for a revival”. A thin, sleek design by John Pederson, the Model 51 (shown below) was offered in .32 ACP and .380 ACP calibers. With some updates — such as improved sights and a shorter, more compact slide and barrel — a modernized m51 design could prove a popular carry piece. No doubt Remington hopes to emulate the commercial success Ruger has achieved with its recently introduced LCP™ compact .380 ACP.
History Lesson — How Remington Arms started
Legend has it that a young Eliphalet Remington II believed he could build a better gun than he could buy, and he set out to craft such a gun on his father’s forge located at Ilion Gulch, New York. In the autumn of 1816, Eliphalet entered a shooting match with his new flintlock rifle, and while he only finished second, his handmade rifle was a success. Orders for new Remington-made rifles and barrels began to accumulate from the many other contestants, and before Eliphalet left the shooting field, he was in the gun business.
Remington Model 51 photo courtesy Mob Guns Inc..
November 8th, 2009
This gear review is by respected prone shooter German Salazar. German recently received the first production version (Serial No. 0001) of the NEW Borden Action espressly designed for Tubeguns. German reports this is “really a great piece of equipment” and it’s affordable at $800 for the single-shot version or $850.00 for the repeater.
NEW Action for the Tubegun Revolution by German Salazar
If you’re a High Power shooter then you know that the Tubegun Revolution is in full swing both in across-the-course and prone matches. For many reasons, including accuracy, availability, cost, delivery time, ergonomics, familiar feel (for AR15 shooters) and more, the Tubeguns are becoming the norm in High Power. I recently built a 30-06 Tubegun for prone matches and have been extremely satisfied with the results, but I had a desire for a better action for it, now that desire is a reality.
While most Tubegun stocks are made to take Remington 700 actions or clone, it has become difficult to get bare Remington actions and bargain priced 700s are non-existent these days. Buying a complete rifle to strip, then blueprinting the action leaves you with about the cost of a custom action invested in the Remington — not the most economically sensible outcome.
Seeing the need for a custom action to fit the Tubeguns at a moderate price, Jim Borden of Borden Rifles is now making a Tubegun Special (TGS) action –- actually six variants of it. The TGS action is made to fit the Tubegun stocks without alteration and has been designed in cooperation with Gary Eliseo (Competition Shooting Stuff) to ensure compatibility and functionality.
Special Features Optimized for Tubegun Installations
The TGS is a full round action, without the scallops of the Borden Alpine/Timberline series and without the flattened rear bridge of the Remington 700. This full round surface presents a much larger surface area for epoxy if you intend to glue-in the action, and simply a better fit if you intend to bolt the action into the tube. Additionally, the TGS has no scope mounting holes or bolt stop since these are not required in a Tubegun stock and their elimination reduces machining costs, helping to keep the retail price competitive with a blueprinted Remington.
Beyond the action profile, there are a few choices in the TGS. You can order it right-handed or left-handed, long action or short action, single-shot or repeater. The single-shot models have a coned bolt as shown in the photos, which helps feeding from the action trough, whereas the repeaters have a flat-faced bolt like a Remington to ensure reliable feeding from a magazine.
The TGS has the familiar Remington-type plunger ejector and a claw extractor similar to the Sako. I have put over 4,000 rounds through my 6BR Borden Alpine with 100% reliability from the extractor. It’s a solid, reliable design. The bolt is nicely fluted in a spiral pattern and the fit and finish of every bit of the action and bolt are first class. It’s almost a shame to epoxy it into the tube, but that’s what it’s meant for!
Borden Accuracy is now a distributor for the CG triggers (X-tremeshooting.com) and can time the action to the trigger before delivery. Other triggers are available from Borden as well and the action takes any Remington-type trigger. Finally, Gary and Jim have standardized locations for the serial number and manufacturer information and the CSS stocks have small windows in the main sleeve to allow those to be seen at all times.
If you’re planning to build a Tubegun, you should take a close look at the Borden Tubegun Special action, it’s a very practical and cost-effective approach with the single-shot actions priced at $800 and the repeaters at $850 as of this writing.
October 20th, 2009
If you had purchased Ruger (RGR) or Smith & Wesson (SWHC) stock after the November election, you would have seen your investment grow almost three-fold. Ruger stock now trades at over $13.00 after hitting $4.52 last fall. If Remington, Bushmaster, Marlin and other Freedom Group companies “went public”, could they ride the coat-tails of Ruger and S&W, and succeed collectively as a publicly traded stock? Cerberus, a private holding company that controls the Freedom Group, apparently thinks so.
Cerberus Plans IPO for Remington and Freedom Group
A surge in gun sales has pushed the stock prices of major firearms manufacturers upwards. Will that trend continue? We can’t say. However, the money men at Cerberus Capital Management, which owns Remington, Bushmaster, Marlin, and other Freedom Group companies, have decided that the time is ripe to “go public” and start selling stock. According to a 10/19 report in the Wall Street Journal Blog, Cerberus plans an initial public offering (IPO) for its Freedom Group companies. The Freedom Group is comprised of Advanced Armament Corp., Bushmaster, Dakota Arms, DPMS, Eotac, H&R, L.C. Smith, NEF, Parker Gun, Remington Arms Company. Advanced Armament Corp. (AAC) is the latest addition to the Freedom Group collection, having been acquired just this month and placed under the Remington Military Products Division.
In its report on the pending Freedom Group IPO, the Wall Street Journal Blog cited AccurateShooter.com. When Cerberus acquired riflemaker DPMS in 2007, we wrote: “One positive aspect to Cerberus’ involvement in the gun industry is that the huge political clout Cerberus commands as the ‘rescuer’ of Chrysler Corp. should undermine efforts to ban AR-platform rifles. Cerberus is big enough to make waves in Washington. Money talks in politics and Cerberus has lots of it.”
Is the timing right for a gun-company IPO? The stock-market continues to move upward, and gun and ammunition sales remain very strong. On the other hand, the panic buying of black rifles has tapered off and AR-platform gun prices are now dropping back to “pre-panic” levels. Morever, at the end of each calendar year there are usually major stock sell-offs. That could drive down prices of Ruger and Smith & Wesson, which could dampen enthusiasm for a Freedom Group IPO. On the other hand Remington is an historic brand with a strong customer base, and Remington/Bushmaster are poised to take an increasing share of lucrative military contracts. With its new ACR (Adaptive Combat Rifle), Remington could well win the contract for the AR15’s replacement. And, even if the US military sticks with Stoner’s 50-year-old AR design, Bushmaster can fill that need, though it has strong competition from Colt and FN Herstal.
A cynical observer might say that Cerberus is simply looking to grab easy profits by “flipping” arms companies it acquired at fire-sale prices. Given the huge run-up in Ruger and S&W stock prices over the past 12 months, Cerberus may figure that investors will be hungry for Freedom Group shares. Right now may be the best time to take the Freedom Group public while gunmakers are still considered a “hot property” on Wall Street. In six months that could change.
|
