Spotting Scope Stand « Daily Bulletin

teslong borescope digital camera barrel monitor

As an Amazon Associate, this site earns a commission from Amazon sales.

December 6th, 2021

Spotting Scope Bench Mount — Smart Solution

Probably 95% of all civilian rifle shooting is done from the bench — if you include fun shooting, load development, sight-in sessions, practice days, youth training, as well as actual benchrest and club competitions. If you shoot with iron sights, or a low-power optic, you’ll definitely need a spotting scope to see your shots on target. And if you’re shooting long-range, that spotting scope will help you see mirage, as well as hits on far targets.

It’s not always easy to place a spotting scope near your bench. There are short benchtop tripods, but they take up precious bench-top space and can interfere with your non-favored arm placement/functions. Or you can deploy a complete separate tall tripod, next to the bench, but, frankly, that’s inconvenient, and with some bench structures it’s difficult to get the scope close enough to the shooter’s eye.

Here is a smart solution from Creedmoor Sports — a specialized, clamp-on Spotting Scope Support that mounts directly to the side of your bench. This will work with heavy, thick range benchtops as well as thinner-top portable shooting benches.

Creedmoor Spotting Scope Bench Mount

This mounting system clamps to the bench, allowing your spotting scope to be suspended near your face, with nothing below it to get bumped. If your buddy wants to look through the scope, simply spin the horizontal boom piece away from the bench. This system adjusts up and down and left and right. Set the scope head in any configuration you prefer. The $219.95 kit has everything you need, including all clamps AND the blue adjustable scope head. Select either 3/4″ rod diameter or 1″ rod diameter. (Bigger is better for heavier spotting scopes).

Creedmoor Bench Mount Spotting Scope Stand Features:

1″ or 3/4″ aluminum rods for vertical and horizontal support (18″ in length)
Anti-pivot pins to keep the mount from twisting on the edge of the bench
Includes high-grade Blue anodized adjustable scope head
Durable anti-slip rubber on the clamp
Micro-adjustment clamping stopper

Permalink - Videos, Gear Review, Reloading No Comments »

January 25th, 2021

Bench Mount for Spotting Scopes from Creedmoor Sports

Creedmoor Spotting Scope Bench Mount

Creedmoor Bench Mount Spotting Scope Stand Features:

Permalink Gear Review, New Product, Optics No Comments »

October 17th, 2020

Spotlight — Creedmoor Sports Polecat V2 Spotting Scope Stand

Every serious competitor needs a good spotting scope support. Spotting scopes are not just for iron sights shooters. Even if you have a powerful riflescope, the spotting scope, typically set at 15-25X magnification, lets you observe wind flags, mirage, and other shooters’ targets. If you are looking for a high-quality, made-in-USA support for your spotter, consider the Polecat V2 system from Creedmoor Sports. Our friend Gavin Gear of UltimateReloader.com recently posted this video review:

Creedmoor Sports has offered excellent products for competitive shooters for decades. The Made-in-USA Polecat V2 system is updated version of Creedmoor’s best-selling spotting scope stand. After collecting feedback from shooters across many disciplines for several years, the designers brought some major advances to this scope stand. First, no pretension are adjustments needed. Horizontal and vertical resistance is controlled by the knurled tightening knob. Second, the Polecat boasts a pre-aligned Delrin clamp so you don’t have to spin the clamp to align with the rods during stand assembly. You can order a Polecat V2 with 3/4″-diameter rod for $296.95 or get the 1″-diameter rod version for $364.95.

Either version can be used for both left-handed and right-handed shooters, with about 5″ standoff from the center of the stand to the scope’s centerline. Polecat V2 packages include head, stop collar, one extension rod, and base. Additional aluminum rods are available to extend height.

Polecat V2 Key Features
— Adjustable head (spotting scope mounts to head)
— Bump stop (protects spotting scope from accidental knock if dropped)
— Base with three fold-out legs
— Leveling adjustment for uneven ground (one leg can be adjusted downward, faced in downhill direction)
— Zero play (slop), giving you the ability to quickly and easily make adjustments
— One-handed operation/adjustment
— 1/4″-20 standard spotting scope thread
— The scope may be positioned above or below the scope head

Shop Polecat V2 here (5% Off with Code UR5) | Read Full Story HERE