Fancy Hardwood Sources for Gunstocks
Virginia Gunsmith Richard Franklin sold his stock-making business to Greg West, but Richard is still making stunning, one-off custom rifles using laminated fancy woods such as Crotch Claro Walnut, Turkish Walnut, Curly Maple, Bloodwood, and burls. One of Richard’s favorite sources for fancy woods is Northwest Timber, based in Oregon. NW Timber has one of the largest collections of highly-figured Claro Walnut and fancy Maple blanks in the country, including many “book-matched” sets that are ideal for a three-layer laminated stock. The two, mirror-image, book-matched pieces form the outer layers, with a central spine of contrasting wood.
When shopping for fancy wood for a laminated stock application, be sure to consider the length and thickness required. For a tri-laminated benchrest stock with a 3″ forearm, you’ll need a block at least 2.5″ wide and 32″ to 35″ long (depending on overall stock length). After sawing that will give you two 1 1/8″-wide slabs, so that a contrasting 3/4″-wide section of wood can be placed in the middle. Thinner blocks of fancy wood can be used in a 5-layer laminate. If you can’t find a block at least 32″ long, a contrasting end cap could be placed on the fore-end. However, Richard prefers to work with blanks that are long enough for the whole stock.
Above is a book-matched set from Northwest Timber in Crotch Claro Walnut. Note how there are two matching pieces, top and bottom.
This above photo shows how spectacular Quilted Maple can look when stained and finished with contrasting highlights. A popular material for fine musical instruments, Quilted Maple can look just as good on a gunstock (below).
For more information, contact:
Northwest Timber
3229 Jefferson-Scio Drive
Jefferson, OR 97352
(541) 327-1000
