Litz Dominates His First-Ever F-TR Match with Pierce-Built Rifle
Bryan Litz shot his first F-TR match recently, and he came up a winner — a big winner. Competing at the Midwest Palma event, Bryan topped the F-TR field, winning by 15 points. In fact Bryan ended up finishing within 10 points of F-Open winner Alex Lipworth. In the 20-shot, 1000-yard matches, Bryan averaged an impressive 195-7X, with a stunning 196-11X score in one match. (Consider that the 1000-yard X-Ring is just five inches in diameter!) Not bad for Bryan’s first attempt at the F-TR game.
We all know Bryan has serious long-range shooting skills. But he also had a secret weapon — a wickedly accurate, wood/carbon-stocked, low-profile F-TR rifle built by John Pierce. With this Pierce rifle, Bryan had to abandon the hard-holding style he uses in sling-shooting competition. Instead he adopted a “less is more”, almost-free-recoil method — and it worked. Is this the future of F-TR? Read on and learn what Bryan has to say about F-TR shooting, “belly benchrest” style.
Sling Shooter Tries F-TR
by Bryan Litz
I’ve been coaching the Michigan F-TR team for a while and finally decided to participate in the competition. F-TR is more rifle-centric than Palma, meaning the precision demands are greater due to the smaller scoring rings. After seeing Eric Stecker’s results with his Pierce rifle at the 2014 Berger Southwest Nationals, I asked my good friend and Michigan team-mate John Pierce to “build me one like Eric’s”. This is the same basic set up as John’s own F-TR rifle as well. It’s a Pierce F-TR action with a 30″ long, 1:9″ twist Bartlein Barrel chambered for the Berger 215gr Hybrids. The barreled action is bedded into a light-weight, BR-style stock built by Bob Scoville. A Phoenix bipod underneath and a Nightforce 15-55X Competition scope complete the package.
Loading the .308 Winchester with Berger 215gr Hybrids
I received the rifle just one week before the Midwest Palma match. During that week prior to the match, I put over 700 rounds on the rifle. I did some load development but was mostly learning to shoot a new rifle in a new discipline. I settled on 215gr Berger Hybrids seated 0.015″ off the riflings over a stout charge of Varget in Lapua Palma (small primer) brass with CCI BR4 primers. The only brass prep was mandreling the necks of the new brass for consistent neck tension. Bullets were slightly pointed, but nothing was segregated by weight, base-to-ogive, or anything. All the ammo I shot in Lodi was loaded in brand-new Lapua brass.
Check Out Bryan’s Set-up with the Rifle (Click Photo to Zoom)
Learning the F-TR Game — Adapting to a New Shooting Style
Coming over from sling shooting, I knew there would be unique challenges to F-TR which I wanted to learn prior to (not during) a major tournament. I learned a new shooting position which doesn’t involve drawing the right knee up. For F-TR I get more straight behind the gun rather than at an angle. I found that the rifle shoots best with very light cheek, shoulder and grip pressure, approaching free recoil. This is how Eric Stecker shot his similar rifle into second place in the SW Nationals. I learned the rifle’s sensitivity to different bipod and rear bag supports, and found the best buttplate position to allow the rifle to track and stay on target after recoil. This set-up shot best with a mostly free-recoil approach, that means “hovering” over the comb, rather than resting your head on the stock. This took some “getting used to” in terms of neck and back muscle tone. These are the kind of details I think it’s important to focus on when entering a new dicipline.
“I love the way this Pierce F-TR rifle flings brass, and wins tournaments. None of my sling guns ever had an ejector. With this rig, it’s become one of my favorite things to eject the brass and just let it fly!”
I think many shooters consider themselves ‘ready for a match’ the first time the rifle shows them a couple 1/3 or 1/4 MOA 5-shot groups from a bench at 100 yards. While making the rifle shoot precisely is certainly a prerequisite for successful match shooting, it’s certainly not the whole story. So as soon as I got the load and rifle shooting 1/2 MOA from the bench, I proceeded to shoot many 10- and 20-shot strings from the ground at 300 and 1000 yards. I shot more than 500 rounds this way, studying the rifles character, and learning to shoot it. It’s amazing how much the precision (grouping) is affected by subtle variables in the set-up, especially when shooting heavy bullets. I truly believe that many F-TR rifles are hindered in their precision potential by something in the way they are set up and shot.
Advice on Shooting the Heavy Bullets in a .308 Win
I believe F-TR set-ups are way more forgiving with light- to medium-weight bullets (155 to 185 grains). By this I mean that it’s easier to shoot good groups with a variety of bipods, rear bags, etc. But as you get into the 200 – 215 grain bullet weights, the precision of the rifle (i.e. group size) becomes very sensitive to set-up and shot execution. I was able to find a good set-up which let the rifle shoot very well on a variety of surfaces (hard gravel, soft grass, sand, etc.). In Lodi, the rifle shot well all week.
Having done so much preparation and training with the rifle the week prior to the match, I felt very prepared and confident. The results were actually better than expected. There were no problems at all with equipment, and I just shot the rifle the way it liked to be shot. In the end, I won the F-TR Division. I can say there were many shooters interested in the Pierce rifle!
Impressive Performance
Bryan observes that this rifle held 1/2 MOA of vertical at 1000 yards for 17 out of 20 shots. That’s impressive accuracy. Bryan was in first place each day of the match, including the 3×1000 on Friday where he averaged over 195-7X. Remarkably, Bryan finished just 10 points behind the F-Open winner, with the next closest F-TR competitor 15 points behind Bryan. In fact, with his .308 Win, Bryan out-scored 75% of the F-Open shooters. CLICK for match results.Bryan gave credit to his smiths and his team-mates: “I’d like to thank John Pierce for building a great F-TR rifle and thank my dad, Bill Litz, for loading the best ammo on the planet. Finally, I’d like to thank the Michigan F-TR team for helping me learn how to shoot F-TR.”
Bryan writes: “Here I am with ‘The Man’, John Pierce, and the epic F-TR rifle he built for me. This thing shoots ‘No S***’ 1/2 MOA Vertical at 1000 yards.”
Similar Posts:
- Litz Wins F-TR Mid-Range National Championship
- Berger SW Nationals: Litz Wins Overall, Biggs Breaks F-Open Record, Spindle Shooters Excel
- A Birthday Shout-Out to Bryan Litz of Applied Ballistics
- Palma Competition with Bryan Litz on Video
- Sherri Gallagher Wins NRA Long Range Championship
Share the post "Litz Dominates His First-Ever F-TR Match with Pierce-Built Rifle"
Tags: Berger Bullets, Bryan Litz, John Pierce, Midwest Palma, Scoville Stock
Nothing like a nice gun, a good load and an incredible wind reader/shooter behind it. Good job Bryan!
Nice, now go make some dern bullets!!!
Very fine performance Bryan. Congrats!!!
That was a nice article. John Pierce is a man of integrity and a wonderful person to have endorsing any shooting sport. You are a very lucky person to have him as a partner and team mate. I’m sure he feels the same.
Derek Rodgers
I’ve seen mirage shields on BR rifles but not the black cloth device your rifle has on it. Is this an anti-glare device? Also what is the purpose of the blue & white cloth on the cheek piece?
Well done Bryan – and great to see you’ve made the move to ‘the Dark Side’ joining us deviant FTR and F-Class types on at least occasions!
That looks a great rifle, and it obvioulsy works! I’d agree with everything you say on bullet choice and gun handling. I gave up on the ‘heavies’ eventually and use the 155.5 Fullbore or 168 Hybrid now for all important matches as I can shoot with greater consistency allied to a light hold.
My only recommendation – not that you need one – is if possible beg, borrow, or steal one of Dan Pahlobel’s FLEX-Pods. It’s a boon to those shooting with a light hold, just use it with a very heavy and fully packed rear bag as all the elevation fine-tuning in the aim is done at the front-end. It’s particularly useful when the rifle has a very long forend so a conventional bipod’s adjusters are out of easy reach.
Great shooting Bryan! You should’ve taken some time out and stopped by the shop while you were in WI!
Later, Frank
Bartlein Barrels
Thanks for all the comments guys!
Carl, the black band is a mirage shade. I prefer the elastic cloth band because it’s maintenance free. Unlike the plastic kind you have to velcro on and get bent/loose, etc., the cloth one stays on all the time. I’ve not seen many cloth bands in F-class, but they’re quite common on the sling end of the line.
Bob,
Production is double what it was this time last year. Bullets are pouring out, hopefully you’re next in the que!
Laurie,
I’m familiar with Dan’s Flex Pod, we (MI FTR Team) have one and have been passing it around for everyone to try. I think it could work on my rifle if my set-up were higher, but as it is, the FlexPod doesn’t lower enough. For now I think I’ll stick with the Phoenix, I’ve got very good control over it. I put the left ski between my left fingers and use it to steer the rifle, sort of like a joy-stick. Just have to remember to back hand off prior to shooting.
Frank,
Maybe next time. I know there are many great barrel makers in WI but I’ve not made it into anyone’s shop yet. The MI FTR team would like to thank you and Bartlein Barrels for your support of our team.
-Bryan
Bryan – – clearly some great work on your part.
One observation of the rifle set up:
Very straight line stock and Bryan has the rear butt plate adjusted up high so that when it is in the shoulder, the barreled action is straight in line with its recoil into the shoulder – – no doubt that helps keep that .5 MOA elevation at 1000 with the big recoil of the 215’s.
Be well Bryan – – Robert
Bryan – nice shooting, obviously a very nice rifle – but nice shooting.
Out of curiosity what does the combination weigh? It looks light. Being from NZ I am always looking for components that would work with Barnards in particular the Barnard P.
The article states “almost free recoil technique”. The Eric Stecker range report /article mentions free recoil as well. To my knowledge free recoil technique is prohibited by ftr rules. Has anyone been disqualfied for using the technique. Ive heard it talked about at the range how is that rule typically enforced, so one doesnt get disqualfied.
Great shooting Brian.
Editor: It’s worth digging deeper into the rules and reading what they actually say. There are some misconceptions. Also, these guys are shooting with slight contact on the shoulder. The method is not “pure” free recoil, i.e. with no contact except the trigger finger.
Bryan – are you a clicker or a holder?
Great job Bryan!
I got a question about the gun. Does your action have any recoil lug?
Great job Bryan!
I’ve got to talk with John Pierce at Raton in 2012 and 2013, and at the BSWN in 2014. Only a few minutes each time, but he always impressed me as being both really knowledgeable and a pretty nice guy. If ever I’m in the market for a new gun, pretty sure I know where my first stop will be!
I would love to know a few things if I may ask:
1. Why small BR4 instead of BR2?
2. What was the muzzle velocity and SD?
3. Was the Varget load 43.00grains?