Smith & Wesson Recalls Two Performance Center Revolvers

Two S&W Performance Center revolvers have been recalled by Smith & Wesson due to potentially dangerous manufacturing defects. The model 460PC is being recalled due to potential barrel failure, while the Model 329PC has been recalled due to possible frame damage during manufacturing.

Performance Center Model 460 Revolver Recall
Smith & Wesson has received four (4) reports of barrel failures involving its Performance Center Model 460 revolvers. These barrels were manufactured by an outside supplier. S&W found that the quality of steel in some of these barrels was sub-standard and may have contributed to failure of the barrel. Model 460PC owners should stop using the revolvers and return them immediately to Smith & Wesson.

This recall applies to Performance Center Model 460 revolvers shipped by the Smith & Wesson Performance Center prior to September 18, 2006. This recall does NOT apply to Smith & Wesson standard production Model 460 revolvers. The affected revolvers can be identified by the following Serial Number Range: EBD0001 – EBD0524, EBF0002 – EBF0251, LHZ0000 – LHZ0511, LLL0000 – LLL0702, LRR0001 – LRR0552, MMM0001 – MMM1809, XMC0001 – XMC0109

Performance Center Model 329 Revolver Recall
Smith & Wesson has issued a recall for the limited edition model 329 revolver. This safety recall notice applies to 270 revolvers manufactured at the Performance Center bearing serial numbers ranging from BVA0004 to BVA0210 and DEW0001 to DEW0099.

S&W states: “It has been determined that damage to the frame may have occurred during assembly of the single-piece barrel. As a result, there exists the possibility that the revolver may rupture during firing, causing a failure of the firearm and creating a risk of personal injury.” NOTE: This safety recall notice does not apply to the model 329 PD. The model 329 PD is designed with a two-piece barrel.