Another Lubrication Option for Neck-Turning
If you want to get started with turning case necks, check out our article on Neck Turning Basics, authored by German Salazar. As German explains, one of the keys to achieving a smooth, consistent cut on your case-necks is to use quality lube and lubricate both the inside of the case necks and the neck-turning mandrel. German uses Imperial Die Wax, the old standby. This works very well, as German demonstrates, but we know that many reloaders prefer to use a liquid lube, as they find that it is easier to apply and remove.
Dozens of different liquid neck-turning lubes have been used successfully, including blends of Mobil 1 motor oil and STP, as well as various “secret recipes”. This Editor’s preferred lube for “skim” neck-turning, where only a single light pass is required, is Prolix Xtra-T lube. This is a thick, blue-colored lubricant that contains a bit of paraffin. It is VERY slippery, yet because of the paraffin it stays in place on the mandrel (arbor). It comes in a 1.25 oz. plastic bottle with a handy extended “needle-nose” applicator tip. The long-nosed tip makes it easy to apply lube inside a case neck, or to very precisely add a small drop right ahead of the cutter tip on the neck-turning tool. Xtra-T lube is also a good general purpose lubricant that nicely fills the gap between a grease and a typical oil, and it works well on pistols too. In consistency, Xtra-T lube is similar to molasses. It flows like a thick oil, but it has good adhesion because of the paraffin component in the blend.
I’m not suggesting Xtra-T is the ultimate “miracle” neck-turning lube. There are many other good options. But Xtra-T applies easily, stands up to heat, stays where you put it, and works great as a general-purpose lube as well. You’ll find Prolix Xtra-T lube in many shooting supply stores or you can order directly from www.ProlixLubricant.com. The small bottle with applicator tip costs $6.99.
