De-Gunking a Jewell Trigger — Speedy Shows How

Gunsmiths often have to serve as gun “doctors” as well as gun builders. Gunsmith (and Hall-of-Fame shooter) Thomas “Speedy” Gonzalez was recently asked to fix a trigger problem. A customer was complaining about a trigger that was erratic and “mushy”. Speedy quickly diagnosed the problem. The Jewell trigger was clogged with gunk and sludge — left-over solvents and lubricants had gummed up the mechanisms. Here’s how the cleaning process unfolded…

Speedy: “Gee why would I want to blueprint my Jewell trigger….it has just got a little mushy lately. It may just need some adjustment. Yeah right — take a look at this”:

Speedy: “Should I go get a tetanus shot now?”

Gunsmith Mike Bryant comments: “I’ve seen a lot of Remington 700 triggers that were gummed up like [that] Jewell was. Also have seen lots of 700 triggers that had the weight-of-pull screw adjusted [by the owner] to where it had no compression on the spring. I wonder how many of the Remington accidental discharges involved triggers with one or the other of these conditions.”

Speedy: “What?! Powder in trigger as well… hmmmmmm.”

Clean up done with Iosso Lubricant/Cleaner. Speedy says this is the “Best parts cleaner I have ever found if you don’t have an ultra sonic cleaning tank. I just melted that crud off with a Q-Tip”.

Same Jewell trigger all happy now — clean as a whistle.

Trigger ready for final re-assembly, looking better than new. Thanks Speedy!

Similar Posts:

• Jewell Trigger Tips — Take-Down and Re-Assembly Procedures
• Jewell Trigger Tips — Take-Down, Cleaning, and Re-Assembly
• Jewell Trigger Disassembly and Reassembly by 6.5 Guys
• How to Disassemble, Clean, and Re-Assemble Jewell Triggers
• Jewell AR15 Trigger at MidwayUSA

Tags: Benchrest, Fire Control, Gunsmith, Gunsmithing, Jewell Trigger, Speedy Gonzalez, Thomas Gonzalez