April 12th, 2014

Remington Recalls Model 700 and Model Seven Rifles with X-Mark Pro Triggers

Remington Arms Company, LLC (Remington) is recalling Model 700 and Model Seven rifles with X-Mark Pro® (XMP) triggers, manufactured from May 1, 2006 to April 9, 2014. The reason for the recall is that “Remington engineers determined that some Model 700 and Model Seven rifles with XMP triggers could, under certain circumstances, unintentionally discharge.” READ Recall Notice.

Remington X-Mark Pro trigger model 700 seven recall

Remington’s investigation determined that some XMP triggers might have excess bonding agent used in the assembly process, which could cause an unintentional discharge. Therefore, Remington is recalling ALL affected products to fully inspect and clean the XMP triggers with a specialized process. Remington has advised customers to immediately cease use of recalled rifles and return them to Remington free of charge. The rifles will be inspected, specialty cleaned, tested, and returned as soon as possible. Remington advises: “Do not attempt to diagnose or repair recalled rifles”.

Remington X-Mark Pro trigger model 700 seven recall

Remington now offers a dedicated website and toll-free hotline to help consumers determine whether their Model 700 or Model Seven rifle(s) are subject to recall.

  • Remington Recall Website: http://xmprecall.remington.com
    On this website you can enter rifle serial number(s) to determine, in seconds, if a particular rifle is subject to recall.
  • Toll-Free Recall Hotline: 1-800-243-9700
    (Prompt #3 then Prompt #1) Monday through Friday, 9 am to 5 pm EDT.

The Remington Recall Notice also says that a visual inspection can reveal if a rifle is subject to recall. You may determine if your rifle is subject to the recall by visually inspecting the face of the trigger.

1) If the face of the trigger is ribbed (see Photo (1) below), your rifle does not have an XMP trigger and is NOT subject to this recall.

2) If the face of the trigger is smooth (see Photo (2) below), your rifle has an XMP trigger and IS subject to this recall. You should immediately seek further assistance by calling 1-800-243-9700 or visiting XMPrecall.remington.com.

Remington X-Mark Pro trigger model 700 seven recall

If You Have A Rifle Subject to Recall
STOP USING YOUR RIFLE. Any unintended discharge has the potential to cause injury or death. Immediately cease use of recalled rifles and return them to Remington free of charge. Rifles will be inspected, specialty cleaned, tested, and returned as soon as possible, at no cost to you. DO NOT attempt to diagnose or repair recalled rifles.

“Remington takes safety extremely seriously,” said Teddy Novin, Director of Public Affairs and Communications. “While we have the utmost confidence in the design of the XMP trigger, we are undertaking this recall in the interest of customer safety, to remove any potential excess bonding agent applied in the assembly process. We have established significant safety and technical resources to determine which rifles are affected and to minimize any risks. Our goal is to have every recalled firearm inspected, specialty cleaned, tested and returned as soon as possible.”

If you have a Model 700 or Model Seven rifle subject to recall, contact Remington right away. Provide the rifle’s serial number and your addresss. Remington will send you pre-paid shipping tags, boxes and written instructions. Remington will cover all related shipping, inspection, and cleaning charges.

Story Tip from EdLongrange. We welcome reader submissions.

Similar Posts: