Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









June 24th, 2014

Litz Dominates His First-Ever F-TR Match with Pierce-Built Rifle

Bryan Litz shot his first F-TR match recently, and he came up a winner — a big winner. Competing at the Midwest Palma event, Bryan topped the F-TR field, winning by 15 points. In fact Bryan ended up finishing within 10 points of F-Open winner Alex Lipworth. In the 20-shot, 1000-yard matches, Bryan averaged an impressive 195-7X, with a stunning 196-11X score in one match. (Consider that the 1000-yard X-Ring is just five inches in diameter!) Not bad for Bryan’s first attempt at the F-TR game.

We all know Bryan has serious long-range shooting skills. But he also had a secret weapon — a wickedly accurate, wood/carbon-stocked, low-profile F-TR rifle built by John Pierce. With this Pierce rifle, Bryan had to abandon the hard-holding style he uses in sling-shooting competition. Instead he adopted a “less is more”, almost-free-recoil method — and it worked. Is this the future of F-TR? Read on and learn what Bryan has to say about F-TR shooting, “belly benchrest” style.

Bryan Litz F-TR John Pierce Midwest Palma

Sling Shooter Tries F-TR

by Bryan Litz
I’ve been coaching the Michigan F-TR team for a while and finally decided to participate in the competition. F-TR is more rifle-centric than Palma, meaning the precision demands are greater due to the smaller scoring rings. After seeing Eric Stecker’s results with his Pierce rifle at the 2014 Berger Southwest Nationals, I asked my good friend and Michigan team-mate John Pierce to “build me one like Eric’s”. This is the same basic set up as John’s own F-TR rifle as well. It’s a Pierce F-TR action with a 30″ long, 1:9″ twist Bartlein Barrel chambered for the Berger 215gr Hybrids. The barreled action is bedded into a light-weight, BR-style stock built by Bob Scoville. A Phoenix bipod underneath and a Nightforce 15-55X Competition scope complete the package.

Click Image to Zoom
Bryan Litz F-TR John Pierce Midwest Palma

Loading the .308 Winchester with Berger 215gr Hybrids
I received the rifle just one week before the Midwest Palma match. During that week prior to the match, I put over 700 rounds on the rifle. I did some load development but was mostly learning to shoot a new rifle in a new discipline. I settled on 215gr Berger Hybrids seated 0.015″ off the riflings over a stout charge of Varget in Lapua Palma (small primer) brass with CCI BR4 primers. The only brass prep was mandreling the necks of the new brass for consistent neck tension. Bullets were slightly pointed, but nothing was segregated by weight, base-to-ogive, or anything. All the ammo I shot in Lodi was loaded in brand-new Lapua brass.

Check Out Bryan’s Set-up with the Rifle (Click Photo to Zoom)
Bryan Litz F-TR John Pierce Midwest Palma

Learning the F-TR Game — Adapting to a New Shooting Style
Coming over from sling shooting, I knew there would be unique challenges to F-TR which I wanted to learn prior to (not during) a major tournament. I learned a new shooting position which doesn’t involve drawing the right knee up. For F-TR I get more straight behind the gun rather than at an angle. I found that the rifle shoots best with very light cheek, shoulder and grip pressure, approaching free recoil. This is how Eric Stecker shot his similar rifle into second place in the SW Nationals. I learned the rifle’s sensitivity to different bipod and rear bag supports, and found the best buttplate position to allow the rifle to track and stay on target after recoil. This set-up shot best with a mostly free-recoil approach, that means “hovering” over the comb, rather than resting your head on the stock. This took some “getting used to” in terms of neck and back muscle tone. These are the kind of details I think it’s important to focus on when entering a new dicipline.

“I love the way this Pierce F-TR rifle flings brass, and wins tournaments. None of my sling guns ever had an ejector. With this rig, it’s become one of my favorite things to eject the brass and just let it fly!”
Bryan Litz F-TR John Pierce Midwest Palma

I think many shooters consider themselves ‘ready for a match’ the first time the rifle shows them a couple 1/3 or 1/4 MOA 5-shot groups from a bench at 100 yards. While making the rifle shoot precisely is certainly a prerequisite for successful match shooting, it’s certainly not the whole story. So as soon as I got the load and rifle shooting 1/2 MOA from the bench, I proceeded to shoot many 10- and 20-shot strings from the ground at 300 and 1000 yards. I shot more than 500 rounds this way, studying the rifles character, and learning to shoot it. It’s amazing how much the precision (grouping) is affected by subtle variables in the set-up, especially when shooting heavy bullets. I truly believe that many F-TR rifles are hindered in their precision potential by something in the way they are set up and shot.

Advice on Shooting the Heavy Bullets in a .308 Win
I believe F-TR set-ups are way more forgiving with light- to medium-weight bullets (155 to 185 grains). By this I mean that it’s easier to shoot good groups with a variety of bipods, rear bags, etc. But as you get into the 200 – 215 grain bullet weights, the precision of the rifle (i.e. group size) becomes very sensitive to set-up and shot execution. I was able to find a good set-up which let the rifle shoot very well on a variety of surfaces (hard gravel, soft grass, sand, etc.). In Lodi, the rifle shot well all week.

Having done so much preparation and training with the rifle the week prior to the match, I felt very prepared and confident. The results were actually better than expected. There were no problems at all with equipment, and I just shot the rifle the way it liked to be shot. In the end, I won the F-TR Division. I can say there were many shooters interested in the Pierce rifle!

Impressive Performance
Bryan observes that this rifle held 1/2 MOA of vertical at 1000 yards for 17 out of 20 shots. That’s impressive accuracy. Bryan was in first place each day of the match, including the 3×1000 on Friday where he averaged over 195-7X. Remarkably, Bryan finished just 10 points behind the F-Open winner, with the next closest F-TR competitor 15 points behind Bryan. In fact, with his .308 Win, Bryan out-scored 75% of the F-Open shooters. CLICK for match results.

Bryan Litz F-TR John Pierce Midwest Palma

Bryan gave credit to his smiths and his team-mates: “I’d like to thank John Pierce for building a great F-TR rifle and thank my dad, Bill Litz, for loading the best ammo on the planet. Finally, I’d like to thank the Michigan F-TR team for helping me learn how to shoot F-TR.”

Bryan writes: “Here I am with ‘The Man’, John Pierce, and the epic F-TR rifle he built for me. This thing shoots ‘No S***’ 1/2 MOA Vertical at 1000 yards.”
Bryan Litz F-TR John Pierce Midwest Palma

Permalink Competition, Gunsmithing 15 Comments »
June 24th, 2014

Not Bad for a Grand-Dad — Bryant’s Still Got His “A-Game”

gene bukys benchrestTexan Mike Bryant is a superb gunsmith and a very successful benchrest competitor. And though he is getting up in years, he hasn’t lost any of his talent as a trigger-puller. In fact, if recent results are any indication, Mike Bryant isn’t getting older, he’s getting better.

Check out this set of targets Mike recently shot, which represent the best 100-Yard Aggregate of Mike’s shooting career. Maybe being a grandfather has improved his skill set.

Mike reports: “Here’s the set of targets I shot at the East-West HV100. Needless to say, I was tickled to death. This is the best 100-yard Agg I’ve ever shot [in benchrest competition]: 0.1744″ average.”

Click Photo for Full-Size Version
Mike Bryant Agg

Mike is a great gunsmith, but he’s retired for the most part now: “I’ve closed up my shop and won’t be gunsmithing for the general public. I want to help my son on the ranch and shoot more benchrest.”

As far as the “shoot more benchrest” part, it looks like Grandfather Bryant is doing well indeed. Mike credits his recent success to other shooters:

gene bukys benchrest“I owe a lot of what I was able to accomplish with this Agg to Gene Bukys. Gene is currently one of the hottest-shooting benchrest competitors in the United States, and a member of the Benchrest Hall of Fame. After the Cactus Classic this year, Gene shared with us the make, twist rate, and contour of the barrels that he had been using to win everything in sight. He also told me which of his reamers that Dave Kiff had made him that he had been using and which one to order from Kiff to shoot the same chamber.”

“Gene had already matched a die to my previous chamber that [eliminated] the click at the top of the bolt stroke to insure smooth bolt operation. After the Cactus I ordered some of the same barrels that Gene was using and ordered a reamer from Kiff. I chambered two of the barrels with the reamer that Gene was using on Monday and fire-formed brass for them on Tuesday and spent a little time at home trying to get the rifles tuned up for the East-West.”

“On Saturday morning I started with one of the rifles and shot it through the LV 100. Not doing particularly well. So, switched rifles to the other one for the HV 100. It seemed to be working better and seemed to get better as the day went along. After the match, I was out pulling up my flags and Wade Hull walks up to me and holds out his hand and says ‘Congratulations, you won the Heavy 100′.”

Hall of Famers Helping Other Benchresters
Mike concludes: “If there is a story in my experience, it is really about benchresters helping other benchresters. People like Gene Bukys, Jack Neary, and Bart Sauter, all Hall of Fame members, are giving back to other benchrest shooters to help them become better. Jack Neary has been giving Vihtavuori tuning classes for many years, passing on the info that helped him get into the Hall of Fame. Bart Sauter posts on Benchrest.com, passing on key secrets of his success. And let’s not forget Tony Boyer who has helped others in many ways, including one-on-one private benchrest lessons. So, if there is a story here, it’s about these guys, not about me.”

Between benchrest matches, Mike Bryant likes to spend “quality time” with his children and grandchildren. Here is Mike on a playground slide with his grandson. Mike’s philosophy is to enjoy life and stay young at heart. We think that’s a good approach to life.

Mike Bryant Agg

Permalink Gunsmithing 5 Comments »
June 24th, 2014

Save 7.5% on All Products at Brownells — Even Sale Items

In today’s economy, saving money is a good thing. And here’s a way you can save 7.5% on anything and everything that Brownells sells. To celebrate its 75th year in business, Brownells is offering a special 7.5% discount on all products. Yes, this 7.5% savings applies to everything Brownells carries, including current sale items. To get your 7.5% savings, be sure to use Discount Code FRK during checkout while shopping at Brownells.com. This is a limited time offer.

Brownells 75th anniversary discount sale
Brownells 75th anniversary discount sale

Sale tip by EdLongrange. We welcome reader submissions.
Permalink Hot Deals 1 Comment »