Dave Miller, shotgun product manager for CZ-USA, recently set a Guinness World Record by hitting 3,653 clay targets in one hour. That’s one bird every 0.985 seconds for 60 minutes straight! Miller rotated through 30 shotguns, prepped by a team of assistants. In setting the new record at the first-ever Clays for Kids event, Miller raised more than $80,000 for Pheasants Forever and Quail Forever’s youth shooting programs.
Miller maintained an astonishing rate of sixty clays busted every minute. To achieve that rate of fire, Miller developed a special style of shooting, firing from the hip rather from the shoulder. He also had 24 helpers loading his arsenal of CZ semi-auto shotguns (which held up to 16 shells each). Miller told reporters: “I had 30 shotguns that I was using. There [were] 60 feet of tables with 5,000 shotgun shells on top of them. They would load them, and just pass them up here, I’d empty them and they’d go back in the assembly line”.
Sinclair Internationalhas released an interesting article about Case Concentricity* and bullet “run-out”. This instructional article by Bob Kohl explains the reasons brass can exhibit poor concentricity, and why high bullet run-out can be detrimental to accuracy.
Concentricity, Bullet Alignment, and Accuracyby Bob Kohl
The purpose of loading your own ammo is to minimize all the variables that can affect accuracy and can be controlled with proper and conscientious handloading. Concentricity and bullet run-out are important when you’re loading for accuracy. Ideally, it’s important to strive to make each round the same as the one before it and the one after it. It’s a simple issue of uniformity.
Bullets.com has released a new, advanced handle-actuated primer seating device. Bullets.com President Shiraz Balolia tells us: “We have designed a new bench-mounted Bald Eagle Primer Press. It seats primers very consistently and you can adjust the depth of the primer in .002″ increments. I have been using one for months. In fact, I used it for the Canada win and also during the Nationals last year where our Team won the National Championships.”
Note that Erik has fitted a cartridge tip on his RCBS ChargeMaster’s dispensing tube.
Erik Cortina has been fiddling around with his RCBS ChargeMaster and he discovered something interesting. Through a series of tests he determined that the ChargeMaster dispensed slightly more precise charges when he trickled the last few 10ths of a grain on to the RCBS pan. Erik wasn’t expecting this result, but he confirmed there may be a slight benefit to this trickling method (as opposed to allowing the ChargeMaster to dispense the full charge).
We should note that Erik’s preferred method of weighing powder is to first dispense a slightly lower charge with the RCBS, transfer the pan to a laboratory-class Sartorius magnetic force restoration scale, then trickle up with his Omega (Dandy Products) Powder Trickler. However, if you don’t have a $800+ laboratory-grade scale, you might just try trickling on to the ChargeMaster pan. You can see Erik’s test procedure in this video:
This 2010 story is reprinted at readers’ request.
In the past few years, tubeguns have really taken over in high power circles. At many matches you’ll see more tubeguns than conventional prone rifles, and a high percentage of those tubeguns will have been built using an Eliseo (Competition Machine) CSS chassis kit.
Step-By-Step Guide to Stock Set-Up
If you are a new tubegun shooter, or if you are planning a tubegun build this winter, our friend “GS Arizona” has prepared a comprehensive set-up guide for Eliseo tubeguns. Eliseo’s CSS chassis system affords a myriad of adjustments. Initially, one can be overwhelmed by all the variables: Length of Pull, Length to Sights, Length to Handstop, Cheekpad Height, Buttstock Offset, Buttstock Cant Angle, Handstop Angle, and Forearm Rotation.
You have to admire someone with serious do-it-yourself skills. Not just hammer and nail skills, but formidable design and fabrication skills. Well Forum Member Dave D. (aka “AKShooter”) has a DIY skill set that might put some trained machinists to shame. You see, “DIY Dave” crafted his own pedestal front rest from scratch, using his own design and about $100.00 in materials (not counting the Edgewood front bag). Dave estimates he put 20 hours of labor into the project, but the end result was worth it: “This Do-It-Yourself rest drives like a dream. I’ve played with the Caldwell and a Sinclair, they have nothing on this one.”
Dave tells us: “Here is my Do-It-Yourself front rest. I wanted to show other folks who are handy that a solid front rest is doable with a bit of time — and you don’t need to spend $1000.00. (You could say this is a design for shooters with more time than money.) This is for F-Class. I was originally overwhelmed by the equipment needed, so I decided to make my own rest. I didn’t have the money for a SEB or Farley Coaxial. This is what I’ll run this season (my second as an F-Class competitor).”
Earlier this month, U.S. Representative Bonnie Coleman (D-N.J.) introduced a new bill, H.R. 2283, that would restrict online ammo sales. Coleman’s legislation, dubbed the “Stop Online Ammunition Sales Act of 2015″, would not ban online sales outright, but it would impose many restrictions and set up a Federal tracking system to “watch” ammo buyers. While H.R. 2283 would not cap the quantity of ammo someone could purchase, the legislation would impose numerous barriers to sale. Most notably, buyers would have to supply identification in person before the product could be shipped.
This Texas Rifle Association (TXRA) Long Range Championship was a match to remember. Despite rain threats, organizers decided to hold the match. On Friday, against the advice of the weather forecasters, the team match was held. The weather held out long enough to complete the match but over four inches of rain fell Friday night. This made for an interesting weekend as competitors had to park at the 300-yard line and shooters and gear had to be trailered to the 1,000-yard line.
Flags placed in Arlington National Cemetery by members of the 3rd Infantry Regiment, the “Old Guard”.
Today, Memorial Day, Americans will honor the sacrifices of military men and women who paid the ultimate price in their service to our nation. More than one million American men and women have died in military service during wartime, including more than 664,000 battle deaths.
Starting June 1, 2015, Bullets.com will take over distribution of March Optics scopes in North America, replacing Kelbly’s. You will soon be able to order March scopes from Bullets.com, which now has exclusive March Scopes importing and distribution rights for the USA, Canada, Mexico, Central and South America. For a limited time, Bullets.com will offer March scopes at 15% below regular list pricing.
Bullets.com President Shiraz Balolia is excited about the March scope deal. He himself uses March scopes on his target rifles, and he knows their quality: “We are very fortunate to have been appointed to be the exclusive distributors for the American continent of a very high end scope line like March. I have been a user of March scopes almost since they were first offered. Many major matches have been won with them.”
You have to admire someone with serious do-it-yourself skills. Not just hammer and nail skills, but formidable design and fabrication skills. Well Forum Member Dave D. (aka “AKShooter”) has a DIY skill set that might put some trained machinists to shame. You see, “DIY Dave” crafted his own pedestal front rest from scratch, using his own design and about $100.00 in materials (not counting the Edgewood front bag). Dave estimates he put 20 hours of labor into the project, but the end result was worth it: “This Do-It-Yourself rest drives like a dream. I’ve played with the Caldwell and a Sinclair, they have nothing on this one.”
