Load Winning Ammo With Progressive — Whidden Shows How
After the Berger Southwest Nationals, we had a long chat with John Whidden, five-time NRA Long-Range National Champion, and a past SWN Sling Division winner. When the subject turned to reloading techniques, John reminded us that he uses a Dillon progressive presss to load much of his match ammo — with a system for much more precise control over powder charge weight. Yes John loaded his national-championship winning .243 Win ammo on a progressive. That may not work for the benchrest game, but John proved this method works well for his discipline — long range sling shooting.
John full-length sizes his match brass every time using a Whidden click-adjustable sizing die. The powder charge is dispensed with single-kernel precision using an Auto-Trickler and lab-grade force restoration scale. The process is completed on a Dillon XL 650 to produce more ammo in less time.
Whidden’s .243 Win Ammo is Loaded on a Dillon
John Whidden of Whidden Gunworks used the .243 Winchester cartridge to win the 2017 NRA Long Range Championship, his FIFTH LR title. John loaded his .243 Win ammo using a Dillon: “My loading process is different than many people expect. I load my ammo on a Dillon 650 progressive press using our own Whidden Gunworks dies. However powder charges are individually weighed with a stand-alone automated scale/trickler system from AutoTrickler.com (see below). Employing a high-end force restoration scale, this micro-processor controlled system offers single-kernel precision. The weighed charges are then dropped into the cases with a funnel mounted to the Dillon head.”
John Whidden Explains His Ammo-Loading Process
The Lapua .243 Win brass is full-length sized every time, and I run one of our custom-sized expanders in my sizer die. The expander measures .243″ which yields the desired .001″ neck tension. In my experience, the best way to get consistent neck tension is to run an expander in the case neck at some point. When sizing the case neck by a minimal amount such as is the case here, I don’t find any negative points in using an expander in the sizer die.
Championship-Winning Load: Berger Bullets, Lapua Brass, and Vihtavuori N160
For a load, currently I’m shooting Lapua brass, PMC primers (Russian, similar to Wolf), VihtaVuori N160 single-base powder, and Berger 105 grain Hybrid bullets. I switched to the Hybrid bullets at the beginning of the 2015 season. Previously I shot the 105gr Berger hunting VLDs, and in testing I found that the Hybrids were just as accurate without having to seat the bullet into the lands. The velocity of this combination when shot through the excellent Bartlein 5R barrels (32” length) is around 3275 FPS.
For my match ammo, I seat the Berger 105 Hybrids well off the lands — my bullets are “jumping” from .035″-.060″. I only use one seating depth for ammunition for multiple guns (I know some benchrest shooters will stop reading right here!) and the bullets jump further in the worn barrels than in the fresh barrels. The bullets are pointed up in our Bullet Pointing Die System and are moly-coated. The moly (molybdenum disulfide) does extend the cleaning interval a little bit, probably 20% or so. The Lapua .243 Win brass is all neck-turned to .0125″ thickness.
In my experience, the keys to accurate long range ammo are top quality bullets and the most consistent neck tension you can produce. From these starting points, the use of quality components and accurate powder measurement will finish out the magic.
Great Ballistics with 6mm 105s at 3275 FPS
Running at an impressive 3275 FPS, Berger 6mm 105 grain Hybrids deliver ballistics that are hard to beat, according to John Whidden:“My .243 Win shoots inside a 6.5-284 with 142-grainers. Nothing out there is really ahead of [the .243], in 1000-yard ballistics unless you get into the short magnums or .284s and those carry a very significant recoil penalty. In the past I did shoot the 6.5-284. I went to the .243 Win because it had similar ballistics but had much less recoil. It doesn’t beat me up as much and is not as fatiguing.
With the .243 Win, there’s no tensing-up, no anticipating. With the reduced recoil (compared to a 7mm or big .308), I can break and shoot very good quality shots. I find I just shoot better shots with the .243 than I ever did with the 6.5-284.”
Similar Posts:
- Whidden on Winning at Long Range: Part 2 — The Cartridge
- .243 Winchester — The Forgotten Long-Range Cartridge
- More Details on Berger Bullets Joining Nammo Group
- Record-Setting 7mm RSAUM Ammo from Berger SW Nationals
- Whidden Shares Secrets of Championship Long-Range Rifles
Share the post "Load Winning Ammo With Progressive — Whidden Shows How"
Tags: .243 Winchester, Auto Trickler, Dillon, John Whidden, National Championship, Progressive, Whidden Gunworks
Stay tuned if you’re interested in this topic. It’s on our To-Do list to make a video of the loading process on the Dillon. I suspect a lot of PRS shooters will like this system.
Also, we haven’t advertised it yet but the Click Adjustable dies can be combined with the Floating Die Toolheads for the Dillons.
I thought he was using a Dillon 550 and not a 650