Some years ago, the folks at TargetWorkz published a a handy set of plans for a 48-inch tall self-supporting target stand. This makes a great do-it-yourself project. To create a sturdy, self-supporting target frame, all you need are some 2x4s, 1x2x48 furring strips, plus fasteners. The target holder, which supports an 18×24 inch cardboard target backer, separates from the base for easy transport.
Note: There is no cross-piece shown in the plan, but we do recommend putting wood crosspieces at the top of the target stand and about 18″ up from the bottom. This will make the frame more rigid, and will allow the frame to work even if the cardboard is badly “shot up”. Use a T-square to set the crosspieces before attaching them with screws.
Alternative Target Stand May from ABS or PVC Pipe
If you like this kind of project, but want to build a frame that is taller, yet can break down into sections, we also have an article showing you how to build a nice frame with inexpensive ABS or PVC tubing. VIEW ABS/PVC Tubing Target Frame Plans.
Share the post "Make Your Own Target Stand with This FREE Set of Plans"
The new .224 Valkyrie for AR15-platform rifles has garnered lots of attention lately. That new cartridge has gotten people thinking about the options for an AR shooter beyond the venerable .223 Remington (and 5.56x39mm NATO). While the .224 Valkyrie is good for shooting long heavy bullets (such as Sierra’s new 95gr SMK), there is a simpler, cheaper option for folks who favor “fast and light” — smaller, lower-mass bullets traveling at very high velocities. That option is the 20 Practical, which is simply a .223 Remington necked down to 20 caliber. This little cartridge can launch 40-grainers at over 3900 fps. That’s bookin’. This makes the 20 Practical a great choice for an AR-based varmint rifle.
20 Practical Ultimate Varminter
A decade ago, as a “proof-of-concept”, AccurateShooter.com created a 20 Practical AR15 Ultimate Varminter with a custom 20-caliber upper from Robert Whitley of AR-X Enterprises, LLC. That project rifle was ultra-accurate — every 5-shot group out of the gun was less than the size of a dime. That gun was auctioned off, but Robert Whitley continues to produce custom 20 Practical AR15 uppers. (The 20 Practical cartridge is simply the .223 Rem necked down to 20 caliber — you can use standard .223 brass and load with standard.223 Rem dies. Just swap in a smaller expander and use smaller neck bushings.)
Robert reports that the accuracy of the first 20 Practical AR15 was no fluke. After building six (6) more 20 Practical uppers, he tested them for accuracy and they all shot great. These uppers feature DPMS low-pro receivers with side charging handles. They are fitted with PacNor 1:11″ twist, three-groove stainless barrels.
Robert reports: “We have been making more 20 Practical AR15 uppers and I have to say I am astounded by the accuracy of these things. For shooting little tiny groups out of an AR15 with bullets going 3500+ fps, it’s hard to beat the 20 Practical. Today I test-fired six more uppers, all with 11-twist barrels. Three of the uppers had 24″ barrels, two had 20″ barrels, and one had an 18″ barrel (we call it ‘Stubby’).
In four of these uppers I shot re-sized Winchester brass using 25.3 grains of WC844 powder with Berger 40gr BTHP bullets loaded at 2.225″ OAL (about .015″ off the lands). WC844 is inexpensive military surplus powder that is nearly identical to H335. I tried three different primers and the choice did not seem to matter (CCI BR4, Rem 7 1/2s and Win Small Rifle — the old silver ones). All these four uppers shot great. Here is an animated GIF with targets from uppers #6, 10, and 11. All groups are mag-fed, 5-shot groups shot at 100 yards using a front rest and rear bag.”
Targets Shot with Three Different 20 Practical AR Uppers
For more information visit www.6mmAR.com, or contact Robert Whitley via email: rcw3 [at] erols.com.
Share the post "The .20 Practical AR — Wicked Accuracy, Low Recoil"
How well can the little 6mm Dasher perform at 1000 yards when the conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ ten-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under three inches.
Video Demonstrates Amazing 1000-Yard Accuracy
Watch the video. You can see the group form up, shot by shot. It’s pretty amazing. Scott’s first shot (at the 45-second mark of the video) was right in the X-Ring, and four of Scott’s first five shots were Xs. That’s drilling them! This video was recorded from the pits at the 1000-yard line, during record fire.
Share the post "Amazing 1K Video: 10 Shots in 4.554″ at 1000 Yards (100-6X)"
Next time you have a barrel fitted, consider having your gunsmith create a “stub gauge” from a left-over piece of barrel steel (ideally taken from your new barrel blank). The outside diameter isn’t important — the key thing is that the stub gauge is created with the same reamer used to chamber your current barrel, and the stub must have the same bore diameter, with the same land/groove configuration, as the barrel on your rifle. When properly made, a stub gauge gives you an accurate three-dimensional model of the upper section of your chamber and throat. This comes in handy when you need to bump your case shoulders. Just slide a fired case (with spent primer removed) in the stub gauge and measure from base of case to the end of the gauge. Then, after bumping, re-measure to confirm how much you’ve moved the shoulder.
In addition, the stub gauge lets you measure the original length to lands and freebore when your barrel was new. This gives you a baseline to accurately assess how far your throat erodes with use. Of course, as the throat wears, to get true length-to-lands dimension, you need take your measurement using your actual barrel. The barrel stub gauge helps you set the initial bullet seating depth. Seating depth is then adjusted accordingly, based on observed throat erosion, or your preferred seating depth.
Forum member RussT explains: “My gunsmith [makes a stub gauge] for me on every barrel now. I order a barrel an inch longer and that gives him enough material when he cuts off the end to give me a nice case gauge. Though I don’t have him cut that nice-looking window in the side (as shown in photos). That’s a neat option. You can tell how much throat erosion you are getting from when it was new as well. For measuring initial seating depths, this is the most useful item on my loading bench next to calipers. Everyone should have a case gauge made by their smith if you have a new barrel put on.”
Forum member Lawrence H. has stub gauges made with his chamber reamers for each new barrel He has his smith cut a port in the stub steel so Lawrence can actually see how the bullet engages the rifling in a newly-cut chamber. With this “view port”, one can also see how the case-neck fits in the chamber. Lawrence tells us: “My stub gauges are made from my barrels and cut with my chamber reamers. With them I can measure where my bullets are ‘touching the lands’ and shoulder bump dimensions. This is a very simple tool that provides accurate information.” The photos in this article show the stub gauges made for Lawrence by his gunsmith.
Share the post "Stub Gauges — Cool Tools That Perform Important Functions"
There’s a formidable new option for PRS Production Class. MasterPiece Arms (MPA) is bringing out a new tactical/practicalcompetition rig, officially called the MPA BA PMR Competition Rifle. This new rifle has a $1999.99 price tag, making it suitable for Production Class. It will be offered with Curtis Action fitted to an X-Caliber, hand-lapped 26″ match barrel. Three chamberings will be available: 6mm Creedmoor, 6.5 Creedmoor and .308 Winchester.
This rifle is designed specifically for the Production Class requirements of the Precision Rifle Series (PRS) and has been approved for use within this division. It includes many competition-related features while staying under the $2,000 price limit for this class. It is available in either a Black or Tungsten Cerakote® finish. Accuracy is helped with a very good barrel — an X-Caliber, hand-lapped 416R Stainless premium barrel with a polished finish. The chamber is indicated within 0.0001” or less to the bore of the rifle.
The MPA BA PMR Competition Rifle utilizes the MPA BA Ultra Lite Chassis, CNC-machined from 6061 aluminum. The V-bedding system provides additional clearance for glass bedding action and straight section of the barrel. The chassis also includes a built-in inclinometer, thumb notch, lower mounted Picatinny Rail, 20 MOA Scope Rail, A2 Style Pistol Grip and is R.A.T. System compatible. The MPA Buttstock comes with an adjustable cheek riser and length of pull that are locked in position with a series of set screws that are embedded into the buttstock body. This is the same system MPA uses on its Standard BA Chassis, but without the thumb wheels.
Share the post "New PRS Production Class Rifle from MasterPiece Arms"
Here’s a “must-read” article for .22 LR rimfire shooters. The recently-released October 2018 issue of Shooting Sports USA (SSUSA) includes a great article with data on thirty-one (31) different types of popular .22 LR rimfire ammunition. The line-up includes low-speed, standard, and Hi-Velocity types, plus choices for plinking, varminting, and target applications. Brands tested include: Aguila, American Eagle, CCI, Federal, Fiocchi, Lapua, Remington, and Winchester. The slowest ammo, CCI Quiet-22 Lead RN, clocked 727 FPS. The fastest ammo, CCI Short-Range Green Lead-Free HP, ran 1735 FPS, more than twice as fast as the Quiet-22.
For each ammo type, SSUSA lists the bullet weight, velocity (FPS), and average of two, 5-shot groups at fifty yards. The most accurate ammo was Lapua Center-X LRN, with a 0.37″ average 50-yard group size. Second best was Lapua X-ACT LRN at 0.42″. Ammo was tested from a bench with a Cooper Model 57-M rifle fitted with 3-9x33mm Leupold VX-2 scope. The ammo offerings were grouped into three categories: (1) Varmints/Small Game; (2) Target; and (3) Plinking. (See ammo tables below.)
Click for larger page-view.
Different types of .22 LR (Long Rifle) rimfire ammo have different applications. Subsonic ammo, typically, is best for 25m to 50m target work with precision rimfire rigs. Hi-Velocity .22 LR ammo provides a flatter trajectory for longer ranges. SSUSA explains: “The array of .22 LR loads… turns a person’s head every which way. Subsonic target loads are the key to decisive accuracy on targets, while hyper-velocity cartridges provide striking bullet expansion on small varmints. In between, standard and high-velocity .22 LRs are loadrf with a variety of bullet weights and styles for everything from small-game hunting to plinking[.]” READ Full SSUSA .22 LR Rimfire Ammo Story.
Rimfire Ammo Article tip from EdLongrange.
Share the post ".22 LR Ammo Smackdown — 31 Rimfire Ammo Types Tested"
2019 will be a big year for Lyman. This company is rolling out a number of new products, including three unveiled today: a variable-speed case trimmer, a universal press stand, and a really nice shooting mat. We think all three products offer some very cool features and a lot of performance for the price.
For 2019, Lyman offers the Case Trim Xpress, a new, affordable variable-speed case trimmer with a razor-sharp CARBIDE CUTTER. Available in either 115V or 230V, the Case Trim Xpress can quickly and accurately trim brass at a rate of approximately 15 cases a minute. The unit has its own power source, and a strong variable-speed motor, so there is no need to use power drills. Using the 10 provided bushings, the unit indexes off the case shoulder — that’s simple, fast and reliable. Plus a precision trim adjustment wheel allows case lengths to be easily “dialed in” to 0.001″ increments. To trim your brass, simply push the case against the carbide cutter until the shoulder stops on the bushing (with precise case OAL set by the wheel). The Case Trim Xpress comes with 10 bushings that fit the most popular bottleneck rifle cartridges, so no pilots are needed. Expected retail price is around $140.00.
Fast and accurate — trims approximately 15 cases per minute
Variable speed motor and ultra-sharp, long-lasting carbide cutter
Utilizes case shoulders for centering and indexing cases (not for straight-walled cases)
Comes with 10 bushings fitting the most popular bottleneck rifle cartridges — no pilots needed.
Compact, low-profile design uses minimal bench space
Lyman says that its new Lyman Press Stand is the only press stand on the market that will accept most current single station, turret and progressive presses of any brand. The stand is heavy-duty steel for strength, pre-drilled for common presses. It will elevate your press 9 ¼” above the bench, providing a clear view of all reloading operations while keeping the operator in an upright, back-healthy position. Raising your press can reduce fatigue while giving you extra room (below) to hold bullet boxes and dies.
Press Stand Fits All these Presses and More:
Lyman: All-American 8 Turret, Crusher, Ideal C-Frame, T-Mag, Victory
RCBS: Rock Chucker, Rock Chucker Supreme, RCBS 6 Turret, Pro 2000
Lee: Load Master, Pro 1000, Classic, Value Turret
Hornady: AP, Iron, Lock-N-Load Classic
Dillon: 550, 650, Square Deal
Redding: T7 Turret
Tac-Mat Long Range Shooting Mats
For 2019 Lyman will offer new Tac-Mat Long Range Shooting mats — in both standard and HD padded versions. These mats are long enough for tall shooters, but they still can be rolled into a compact, easy to transport size. The Tac-Mat will be offered in two versions: a basic design in 600D construction with a carry handle and shoulder strap, or the heavy-duty version (HD) in 1000D construction with elbow pads, a built-in bipod stop, carry handle and shoulder strap. We like these new mats — a lot of smart thinking went into their designs and features.
Who doesn’t want to save money? If you can get a significant discount, you should really take advantage of that opportunity. Guys, we’ve been tracking prices on shooting sports products at vendors around the country. Sad to say, we’ve seen price increases across the board in 2019. Reloading components, loading tools, stocks, targets, electronic gadgets — you name it, the price trend is moving upwards. Thankfully our friends at Precision Reloading are holding the line. Even better, Precision Reloading is running a really significant promotion right now.
Take Note! For today and tomorrow, January 16 and January 17, you can get 15% OFF All ORDERS over $100.00. That’s right, save 15% on your purchases at Precision Reloading with Code 15OFF. If you buy a $400.00 item that could save you $60.00. Yes, this applies to pretty much everything in stock at Precision Reloading, including all major brands below (and dozens more including Lapua, Berger, Forster, Hodgdon, Nosler, RCBS, Redding, Sierra etc.).
If you need bullets, brass, powder, dies, presses, powder dispensers, check out this sale. It’s a very good deal. Use Code 15OFF at check-out to save 15% on your orders over $100.00.
Share the post "Save 15% NOW on Reloading Components, Tools, and Gear"
CMP Competition Rulebooks that will govern all CMP sponsored and sanctioned competitions in 2019 have now been approved by the CMP Board’s Rules Committee and posted on the CMP website. Significant changes in this year’s rulebooks include dividing the former Service Rifle and Pistol Rulebook into two separate rulebooks, the establishment of a new program to give persons with disabilities an opportunity to earn Distinguished Badges, and the creation of separate unlimited classes for Modern Military Rifles and Rimfire Sporter Rifles. 2019 CMP Competition Rulebooks are effective immediately and can be downloaded from the CMP website by using the following links:
CMP Games Competition Rules, governs As-Issued Military Rifle, Modern Military Rifle, Vintage Sniper Rifle Team Match, Rimfire Sporter Rifle and As-Issued Pistol
LINK: http://thecmp.org/wp-content/uploads/CMPGamesRules.pdf
Here are key 2019 CMP Rule Change Highlights. For a more complete list of important changes, read the official CMP 2019 Rule Change Summary.
New Distinguished Marksman Program For Shooters with Disabilities
A major new CMP program being introduced in 2019 is the Distinguished Marksman Badge Program for competitors with medical or physical limitations or disabilities. To implement this program, the CMP is establishing a new Distinguished Badge called the Distinguished Marksman Badge. Any rifle or pistol competitor with a disability or limitation that previously prevented them from fully meeting rules requirements for earning EIC credit points is invited to apply to the CMP for a “Distinguished Marksman Authorization” (contact acantu@thecmp.org or phone 419-635-2141, ext. 602).
Electronic Scoring Target Rules
New electronic target (EST) installations at the Talladega Marksmanship Park and CMP Travel Games necessitated special rules to govern irregular shot entries that may appear on electronic targets. CMP EST rules were updated this year, based on EST experiences. CMP Rules now define EST complaint resolution processes for: 1) a protested shot value; 2) a missing slow-fire shot; 3) a missing rapid-fire shot; 4) an extra slow-fire shot and 5) an extra rapid-fire shot.
Highpower Rifle Rule Changes
Separate Highpower Rifle Rulebook
Until this year Service Rifle and Pistol events all had the same rulebook. As a result, rules frequently skipped from rifle to pistol and back and this often caused confusion. Now there are two separate rulebooks, one for Highpower Rifle and a separate rulebook for Pistol.
Long Range Rifle Classification System
The CMP brought Long Range Rifle competitions at 800, 900 and 1000 years back to Camp Perry and the National Matches in 2018. This successful new program attracted 182 competitors who made 454 event entries. This year’s change features the introduction of a Long Range Rifle classification system that will expand the CMP Highpower Rifle classification system implemented in 2018 (HP Rule 3.11.4).
National Matches Program
The 2018 National Matches Program that introduced CMP Cup Matches, Long Range Rifle Matches and the Roosevelt Match (for U.S. Krag and M1903 rifles) will be unchanged in 2019. All of the highpower rifle events that were on the 2018 National Matches Program are already in this year’s National Matches Schedule. If you have not done so already, download the 2019 National Matches Calendar.
In 2019, the “Standard Modern Military Rifle” will return to its original rules for AR-type rifles that featured a 7.5 lbs maximum weight and metallic sights only. In 2019, AR-type rifles that weigh more than 7.5 lbs or that have optical sights will compete in a separate Unlimited Class. In addition, Modern Military Rifles with optical sights will now all be in the Unlimited Modern Military Rifle Class. Free-floating handguards will be allowed in both the Unlimited and Standard Modern Military Rifle Classes.
CMP Games Rule Changes
The CMP Games Rulebook that governs As-Issued Military Rifle and Pistol events as well as Rimfire Sporter Matches has some of the most significant 2019 rule changes. These include the establishment of an Unlimited Modern Military Rifle Class and the expansion of the Rimfire Sporter Tactical Class to become a combined Tactical and Unlimited Class (TU-Class). Changes in this rulebook are.
Modern Military Rifle
For 2019, after much debate and inputs from many, the CMP decided to return the first Modern Military Rifle Class to its original rules as a Standard Modern Military Rifle and to establish a separate Unlimited Modern Military Rifle Class. The Standard Modern Military Rifle will go back to its original 7.5 lbs. weight limit for AR-type rifles and 9.0 lbs. for M1As. Standard Modern Military Rifles will be restricted to metallic sights only. Rifles that weigh more than 7.5 lbs. or 9.0 lbs. or that have optical sights will now be in the Unlimited Modern Military Rifle Class. Restrictions against float tubes or metallic sights with finer adjustments were removed for both classes.
As-Issued Military Rifle Events
The core of the CMP As-Issued Military Rifle program is the ever-popular Garand-Springfield-Vintage Military Rifle triad. Those events and the Carbine Match, which accompanies them on many match programs, remain unchanged.
Last week, lame duck U.S. Senator Dianne Feinstein (D-CA) revived her crusade to ban semi-automatic rifles along with all magazines holding more than ten (10) rounds. Feinstein’s new legislation, the “Assault Weapons Ban of 2019″, would ban “the sale, manufacture, transfer and importation of 205 military-style assault weapons by name.” Also included would be certain firearms that accept “a detachable ammunition magazine and [have] one or more military characteristics including a pistol grip, a forward grip, a barrel shroud, a threaded barrel or a folding or telescoping stock.” The federal legislation would also outlaw a variety of adjustable stocks plus stabilizing braces for pistols. Magazines would be banned if they “hold more than 10 rounds of ammunition”.
Feinstein and lead co-sponsors Chris Murphy (D-CT) and Richard Blumenthal (D-CT) say their legislation is needed to end mass shootings and “rid the streets” of “military grade weaponry”.
However, it is unclear that this sweeping gun ban would have any significant effects, other than restricting the rights of law-abiding gun owners. According to the NRA-ILA: “The firearms the bill targets are … the most popular class of centerfire rifles in America, with some 16 million having entered then stream of commerce in the U.S. since the previous national ban expired in 2004. Law-abiding Americans use them for every type of lawful purpose, including personal and home defense, hunting, marksmanship competitions, and recreational target practice.”
Semi-Auto Rifles Are Rarely Used in Crimes
The NRA-ILA states: “While law-abiding Americans have adopted semiautomatic rifles in droves, they are not the firearm of choice for violent criminals. Year after year, the FBI’s statistics tell a consistent story: rifles of any sort are used less often as a murder weapon than other types of common firearms, as well as knives and cutting instruments, clubs and other blunt objects, and even hands, fists, and feet. Feinstein’s bill would ban firearms that are actually under-represented in nationwide violent crime trends.
The NSSF Opposes Sen. Feinstein’s Latest Gun Control Bill:
The National Shooting Sports Foundation (NSSF), the trade association for the firearms and ammunition, today announced that it opposes the Assault Weapons Ban of 2019 introduced in the U.S. Senate[.]
The legislation introduced by Sen. Dianne Feinstein, like earlier versions, relies on wrongfully defining commonly-owned semi-automatic rifles based on certain cosmetic features. The new version of this legislation, however, expands ways to ban the most-popular center-fire rifle in America. Since the original Assault Weapons Ban expired in 2004, more than 16 million of these rifles have been legally purchased for lawful purposes.
“It is disappointing to see politicians continue to pursue a failed policy agenda that has proven ineffective in improving public safety and will deny law-abiding citizens their Constitutional right,” said Lawrence G. Keane, NSSF Senior Vice President of Government and Public Affairs and General Counsel. “Despite what proponents may say, the record shows that Sen. Feinstein’s original 1994 Federal Assault Weapons Ban had no demonstrable impact on reducing crime and this one would be equally ineffective.”
Since the original ban, firearms ownership has increased while the criminal misuse of firearms has steadily dropped. FBI crime statistics demonstrate there is no justification for banning modern sporting rifles. Senator Feinstein continues to mislead the American public by demonizing semi-automatic rifles based on external, cosmetic features that have no bearing on the function of a firearm[.]
Share the post "New “Assault Weapons” Ban Introduced in Congress"
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Field & Cave Outfitters – AR500 Gong 5-Pack, $69.99
Field & Cave Outfitters is now running a great SALE on its 3/8″ AR500 Gong Combo Packs. These 5-Packs include 4″, 6″, 8″, 10″ & 12″ laser-cut steel round gongs with two hanging “ears”. For the rest of January, or while supplies last, Field & Cave is offering these for $69.99 DELIVERED! Grab one of these packs of AR500 targets before they run out. This super-low price won’t last long. These are not seconds or imports and are laser-cut in Texas from prime domestic NuCor AR500 plate. Gongs ship USPS Flat Rate Priority Mail, so customers are getting them in as few as two days after ordering (USA addresses only).
2. Bruno Shooters Supply – Krieger Barrel Sale, $25 Off
Krieger produces some of the finest cut-rifled barrels on the planet. They are in high demand, but thankfully Bruno’s always stocks a large selection of Krieger barrels in a variety of calibers and contours. Right now you can save $25 on super-premium Krieger barrels with Bruno’s barrel bargain days. All Krieger Barrels are now $25 off. Bruno’s has a great selection right now including some of the hard-to-find 6.5mm and .284 barrels.
We like Kahr pistols for self-defense. They are slim, the grips are comfortable, and the DAO triggers are pretty smooth. Kahr pistols are also an excellent value. Right now, the hard-hitting .40 S&W Kahr CT40 is on sale at Brownells. The CT40 features a polymer frame, stainless steel slide, 4″ barrel, and white bar-dot sight configuration. This pistol is just 0.94″ thick and weighs just 21.8 oz. with empty magazine. This is a slim, relatively light-weight carry option. Right now the CT40 is on sale at Brownells for $279.99 with a $10 FFL fee. Use Code M8Y to save $20 with free shipping. That lowers your net cost to $269.99 delivered — a heck of a bargain. Inset image from Guns America CT40 Review.
We see more people storing their guns and valuable in multiple safes. This way you can have rapid access to home-defense weapons, while still keeping your main collection in a big heavy safe. You may also want a secondary safe for a separate work-room or storage area. The Barska Biometric Safe is a great size for small rooms, yet it still holds full-size long guns. This safe features instant access with a Biometric scanner that reads the owner’s fingerprint. This Barska provides a very high-tech storage solution for $299.49 — a reasonable cost. Get one now and they’ll even throw in a FREE $25 value dehumidifier!
5. EuroOptic — Leica CRF 2000-B, $399.00
This may be the best deal we’ve seen on the vaunted Leica 2000-B Laser Rangefinder (LRF) with 7-power optic. This unit is rated out to 2000 yards on reflective objects (in real-world use it will laze a deer well past 800 if you can hold steady). The Leica 2000-B features air pressure and temperature sensors, plus on-board inclinometer. Angle correction works out to 1200 horizontal yards equivalent, with the true hold-over displayed in both MILs and MOA. The compact Leica CRF 2000-B weighs just 6.5 ounces and measures 4.5″ L x 2.25″ H x 1.25″ W. It has a waterproof outer shell.
6. Various Retailers – Springfield Gear Up Giveaway, $265 value
The Springfield M1A rifle, descended from the military’s M14 battle rifle, has an impressive pedigree. If you’d like to add an M1A to your gun collection, now’s a great time to buy. When you purchase a qualifying M1A rifle, Springfield Armory will give you two (2) additional magazines plus a scope mount for FREE. Those mags and the mount represent a $265.00 value! In addition, you can buy Vortex scopes at significant savings — up to 57% off MSRP. Below are the Vortex scopes you can buy at a huge discount:
For more details on the M1A promotion, CLICK HERE. You’ll find qualifying M1A rifles at Cabelas.com and other large retailers. If an M1A has been on your wish list, this is an attractive offer.
7. Stocky’s — LR Stocks with Aluminum Bedding Block, $199.99
Here’s a good deal on a versatile Stocky’s Long Range Stock with aluminum V-block bedding system. For just $199.99, order this for Rem/Rem Clone long actions or short actions, with either narrow or wide (varmint/tactical) barrel channel. This would be a good choice for a varmint rifle. This is also offered with handsome hydrographic or web-pattern baked-on textured finishes for $219.99.
8. Creedmoor Sports – MTM Tactical Range Box, $44.95
When you head to range do you always seem to leave something behind? Pick up this MTM Tactical Range Box and you’ll be able to fit everything you need inside — ammo, cleaning supplies, tools, target stickers, Kestrel and even a set of earmuffs. This range box include multiple small parts trays, plus two padded stirrups that anchor into the base so you can use the range box as a field cleaning stand. The MTM Range Box also has a vertical support bracket that fits in the magazine well of AR-platform rifles. On sale now at Creedmoor Sports for $44.95, this is an versatile item that can tote your ammo, accessories, and serve as a cleaning station at the range.
9. Amazon – Proster Wind Meter, $16.99
Wish you had a modern impeller-style wind meter but only shoot a couple matches a year and can’t justify spending $150 (or more) on one? This Proster wind meter has a very impressive 4.5 star overall rating (with hundreds of reviews), so buy with confidence. Now on sale for just $16.99, this is a very useful tool for a bargain basement price. Get this affordable Wind Meter to ensure you have reliable wind readings for ballistics calculations. And unlike a costly Kestrel, with this low-priced wind meter, you won’t feel too bad if it gets lost or misplaced some time.
Most Weekly Deals Sourced by F-Class John.
Share the post "Bargain Finder 173: AccurateShooter’s Deals of the Week"
PRS and NRL shooters, as well as game hunters, now have new ultra-accurate Berger and Lapua factory ammo for the popular 6mm Creedmoor and 6.5 Creedmoor chamberings. For shooters who do not have the time or equipment to hand-load, these new factory ammo options promise outstanding performance. We fully expect that these new offerings from Berger and Lapua will set new standards for accuracy and ballistic uniformity among commercial ammunition for the 6mm Creedmoor and 6.5 Creedmoor. Lapua’s match ammo for the similar 6.5×47 Lapua cartridge has shown outstanding accuracy with ES/SD numbers rivaling high-quality hand-loads. (SEE 6.5x47L Test Results).
New Lapua 6.5 Creedmoor Target and Lead-Free Hunting Ammunition
Lapua has added the popular 6.5 Creedmoor cartridge to its line of Scenar-L Target ammo and its Naturalis Hunting ammunition offerings. The 6.5m Creedmoor 136 grain Scenar-L offers a high ballistic coefficient (BC) for long-range competitive target shooting, yet maintains SAAMI configuration for flawless function through all factory or custom rifle magazines. Lapua ammo will also be loaded with the excellent 123 grain OTM Scenar. One of our favorite bullets, the 123-grainer offers faster velocities (and less recoil) than its bigger brother, and may be the best choice for many PRS stages.
6.5 Creedmoor ammo loaded with the 140 grain Lapua Naturalis provides hunters a lead-free option for hunting in areas that ban lead bullets. Designed and manufactured from pure copper, Naturalis bullets will reliably retain 90-100% of their original weight. Lapua’s Naturalis projectiles produce consistent, controlled expansion at the widest velocity range on the market.
New Berger 6mm Creedmoor Target and Hunting Ammo
New 6mm Creedmoor Target Ammunition is loaded with Berger 105 grain Hybrid Target bullets, the “go-to” for PRS shooters and long-range accuracy enthusiasts alike. Built using premium-grade Lapua cartridge cases, Berger’s 6mm Creedmoor Target Ammunition provides the discriminating shooter the highest quality components and sub-MOA accuracy “off-the-shelf”, unequaled by the competition.
New Berger 6mm Creedmoor Hunting Ammunition is loaded with 95 grain Hybrid Classic Hunter bullets in premium Lapua brass. These top-flight components deliver lethal precision and sub-MOA accuracy — impressive for hunting ammo. The hybrid ogive design of the Classic Hunter projectile is the same as Berger Hybrid Target bullets, while allowing for SAAMI length configurations for efficiency in the field and reliable functioning through magazines.
Share the post "Creedmoor Heaven — New Factory Ammo from Berger and Lapua"
20 Practical Ultimate Varminter
How well can the little 6mm Dasher perform at 1000 yards when the conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ ten-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under three inches.
