Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









January 12th, 2020

TECH Tip: Reduce Electronic Scale Drift with Static Guard Spray

Digital Scale Static Guard Static Electricity

Digital Scale Static Guard Static ElectricityApparently reducing static charges on and around electronic scales can reduce their propensity to drift, lessening the problem of “wandering zero”. Just how and why static charges interfere with scale performance is unclear, but many shooters have noticed that static electricity can cause electronic scales to behave strangely. So how do you reduce static charges around your digital balance? GS Arizona, creator of the Rifleman’s Journal Blog, has found a very simple solution — an anti-static aerosol spray — that, by all indications, actually works. When this “spray-can solution” was suggested to GS by a fellow shooter, GS was skeptical. However, he tried the stuff and he says that it really does help the scale maintain zero over time, with much less observed drift.

Static Guard Reduced Scale Drift
GS Arizona explains that the use of “Static Guard” spray helped mitigate the problem of a drifting zero on his Ohaus Navigator electronic scale. He writes: “My electronic scale… suffers from drifting zero (as they all seem to). I’ve read dozens of forum posts about drift and how to minimize its occurrence, so I know this problem isn’t limited to my scale or my workshop. Sometime last year, John Lowther mentioned the use of anti-static spray as a solution to the drift problem. John stated that the spray had virtually eliminated drift for him.”

GS Arizona found that the Static Guard actually worked: “The spray works great, just as John said it would. I spray all surfaces that I touch with my hands and arms as well as the pan (top and bottom), the metal tray on which the pan rests and the table under the scale. In six months or so of using the spray I’ve re-applied it about two or three times; it certainly isn’t something that you need to do each time you sit down to load. Before using the spray, it was not uncommon for me to re-zero the scale 10 times in the course of loading 72 rounds; now it might need it once during a session.”

Permalink Gear Review, Reloading, Tech Tip 6 Comments »
January 11th, 2020

SHOT Shot 2020 Preview — Variety Pack

Shot show leggings products accessories 2020
Concealed Carry Yoga Pants? Yes these Alexo Athletica Leggings will securely hold a small carry pistol or taser. There are 4 holster pockets front/rear and 6 other pockets for phone, keys, or other items.

CLICK HERE for ALL 357 New-for-2020 SHOT Show Products »

2018 SHOT Show Planner new productsThousands of new products will be on display at SHOT Show 2020, the huge gun industry trade show held each January in Las Vegas. Some of the most highly-anticipated products have not yet been revealed, including new rifles, chassis systems, handguns, reloading tools, and state-of-the-art optics.

However, the official SHOT Show Product Planner offers a “sneak peak” at 357 new-for-2020 products. More will come in the weeks ahead. For the time being, however, here are six interesting accessory products and tools. There is a very interesting Universal Bullet Seating Die, plus new products from Lyman and Accu-Shot.

1. FAB Defense — RAPS Adjustable AR Stock

Shot show2020 RAPS adjustable ar ar15 buttstock stock

We like this Rapid Adjustable Precision Stock (RAPS) AR buttstock because the LOP and cheek height is very easy to adjust. In addition, the lower rear section (toe) of the buttstock is straight and smooth so it can function as a bag-rider. Too many “tactical style” buttstocks put a rail or notches on the bottom that grab in a bag. The RAPS from FAB Defense has a patent-pending 1Latch system with a memory feature that returns the adjustable LOP to its pre-set position. The integrated cheek rest has a height adjustment of up to 42mm and a non-slip rubber buttpad with 10mm of height adjustment.

2. Frankford Arsenal — Universal Bullet Seating Die

Shot show 2020 Frankford Arsenal Universal Bullet Seating Die

We like this concept. Now you can seat a variety of bullet calibers with a single die. Spend less money on your dies and save (storage) space on your reloading bench. Frankford Arsenal’s new Universal Bullet Seating Die holds .224 to .338 caliber bullets in place while seating, including a built-in micrometer allowing for precise micro-adjustments to the seating depth of the bullet. The die has a standard 7/8×14 thread for standard reloading presses. This Universal Seating die comes in a handy plastic case that holds all the caliber inserts plus die body.

3. Lakewood Products — Toaster-Style Rifle Carry Case

Shot show 2020 Lakewood Rifle Carry case B141L vertical

We like vertical drop-in, “toaster-style” rifle carry cases. These are easy to deploy and they don’t side-load your expensive optics when you clamp a hard case-lid shut. The new Lakewood B141L Scoped Rifle Case (Long) is a top-loading, soft-sided hard case that fits rifles up to 52″ overall length (OAL). That will fit most hunting and varmint rifles, and many competition rifles. Note — this is NOT just a foam and fabric case. Inside the ballistic nylon exterior is a case constructed of ABS plastic enveloped in foam padding. The case’s exterior dimensions are: 55″ L x 6″ D x 13″ W. Choose black (as shown) or True Timber Kanati camo.

4. Accu-Shot — Atlas CAL Cant and Loc Bipod without PAN

Shot show 2020 Atlas Bipod Cant Lock Super CAL

Since the Atlas Bipod was introduced in 2005, maker Accu-Shot has been asked for a no-pan model. The new Atlas CAL (Cant and Loc) model is a stable, adjustable bipod that dispenses with the PAN feature of older models. Many shooters thought the pan simply wasn’t necessary (or helpful) when shooting show-fire at bullseye-type targets. The new Atlas Super CAL (S-CAL) has the same features with 45° of Cant and larger leg spread.

5. Lyman Products — New Torque Wrench for Rifles and Pistols

Shot show 2020 Lyman Torque Wrench

The Lyman Torque Wrench allows the user to safely and correctly attach scope bases, scope rings, action screws and other fasteners to firearms. The Lyman kit comes with a variety of bits to fit various screw/bolt types. The orange ring allows the user to precisely set correct screw torque. This is very important for proper mounting of optics.

6. Hoppes — New Gun Vise

Shot show 2020 hoppes rifle cradle caddy vise tipton

You’ll probably seen the Tipton Gun Vises, both basic and deluxe. Here’s a new competitor offering good functionality for the price. Hoppeā€™s Gun Vise ($44.99 on Amazon) easily accommodates all styles of long guns, shotguns and other popular modern sporting rifles. We like the adjustable front cradle which will fit both narrow and wide fore-ends. There are multiple slots on the base for tools, solvents, and other gear. The Gun Vise also includes rubber over-molded feet for extra security.

Permalink Gear Review, New Product, News, Tactical No Comments »
January 11th, 2020

New and Revised CMP Rules for 2020 Released

2020 CMP Civilian Marksmanship program rules Highpower High Power mandatory eye protection

The Civilian Marksmanship Program (CMP) has issued important rule changes for 2020. These cover Highpower Rifle (Centerfire), Smallbore Rifle (Rimfire), and Pistol. In addition, there are CMP Games rules changes. READ RULE CHANGES HERE.

The big news is that Eye and Hearing Protection are now MANDATORY for Highpower Rifle competitors and Pistol shooters in all CMP-affiliated matches. The 2020 CMP Highpower Rifle, Pistol, and CMP Games Rulebooks all contain the following rule:

“All competitors and competition officials are required to wear appropriate eye and hearing protection when on shooting range firing lines during highpower rifle or pistol firing. All competitors must comply with this requirement before they can participate in a CMP sponsored or sanctioned competition. Competitors are responsible for selecting their eyewear and hearing protection.”

2020 CMP Civilian Marksmanship program rules Highpower High Power mandatory eye protection

Let there be no confusion, the CMP’s rule change notice adds: “The CMP and its sanctioned match sponsors will actively enforce this rule in 2020″.

CMP Safety Eye protection glasses rule change
In 2020, all CMP centerfire rifle and pistol shooters must employ Eye Protection and Hearing Protection.

Other important Rules Changes include:
1. Expansion of CMP Pistol Program rules for 3-Gun Match Pistol events.
2. Establishment of Smallbore Rifle Distinguished Badges.
3. Substantial reworking of rules for electronic scoring targets.
4. Rule Regarding “Resting” Magazine on Arm during Prone.

No More Mag Resting in Prone Position
Of note to Service Rifle and M1A shooters is a new rule that attempts to restrict a common practice of using the rifle magazine to support the gun on the arm while shooting prone. A few competitors were resting M1A or M16/AR magazines on their sling arms or shooting jacket sleeves. The prone position rule has been strengthened to state that while “a magazine may touch the shooting jacket sleeve … it may not rest on the jacket sleeve, jacket elbow pad, arm or ground. Competitors must control their prone positions to make they are not using the magazine to support the rifle in prone. Competitors can make sure their prone positions are not questioned by keeping the bottoms of rifle magazines visibly clear of sleeves or arms.

2020 CMP Civilian Marksmanship program rules Highpower High Power mandatory eye protection

Smallbore Rifle Distinguished Badges
The Distinguished Rifleman Badge has been a treasured honor among highpower rifle shooters. Now this important award will be available to smallbore shooters as well. The Distinguished Badge Program, which dates back to the first Distinguished Marksman Badges awarded by the Army in 1884, is being expanded in 2020 to award two new badges for excellence in Smallbore Rifle competitions.

CMP 2020 Rules: Highpower, Smallbore, Pistol, CMP Games

Report based on article by Gary Anderson, DCM Emeritus
The CMP Competition Rulebooks that will govern CMP sponsored and sanctioned Highpower Rifle, Pistol, CMP Games and Smallbore Rifle competitions in 2020 have been approved by the CMP Rules Committee and are now posted on the CMP website. The 2020 rulebooks went into effect on the 1st of January. All four rulebooks can be downloaded from the CMP Competition Rulebooks webpage.

The most important changes in the 2020 Rules include a major expansion of CMP Pistol Program rules that now provide for 3-Gun Match Pistol events, the establishment of Smallbore Rifle Distinguished Badges, a change in eye and hearing protection use in Highpower Rifle and Pistol Matches from “strongly urged” to “required”, a substantial reworking of rules for electronic scoring targets and several rule clarifications in each of the four disciplines. All changes from the 2019 Rules can easily be identified in the new rulebooks because they are shown in underlined, red text (printed Rulebooks will have underlined text). A detailed summary of 2020 Rule Changes is presented at the end of this article.

Here are some 2020 CMP Rulebook changes that merit further explanation:

(more…)

Permalink Competition, News, Shooting Skills No Comments »
January 11th, 2020

Custom-Honed Full-Length Dies — Better than Bushings?

Honed FL Forster Whidden Full-length dies
For some applications, we prefer a non-bushing FL die over a bushing die. Shown here are three Forster full-length sizing dies, with necks honed to three different dimensions: 0.265″, 0.266″, and 0.267″.

The Honed Full-Length Sizing Die Option

There are many good options in full-length (FL) sizing dies. Most precision hand-loaders prefer FL dies with neck bushings. These let you adjust the “grip” on your bullet by using larger or smaller bushings. FL bushing dies are available from Whidden Gunworks, Forster, Redding and other makers.

Conventional, non-bushing full-length sizing dies can create ultra-accurate ammo with very low run-out. But many conventional non-bushing FL dies have an undersized neck diameter so you end up with excess neck tension, and you work the brass excessively.

There is another effective option, one that promises extremely low run-out. The honed FL die is a full-length sizing die that has the necked honed to provide a precise fit to the case-neck. When done right, honed FL dies produce extremely straight ammo — as there are no issues with bushing alignment (or bushings that are not perfectly concentric). This Editor owns honed dies from Forster, Redding, and Whidden. They all perform extremely well, delivering match ammunition with extremely low run-out measured with a 21st Century Concentricity Gauge.

In one of the most popular articles we’ve ever published, Bugholes from Bipod, California shooter “Froggy” explained why he prefers honed dies for his tactical ammo.

Q: Do you FL size every time? Do you use custom dies?

Absolutely, I full length resize all of my brass every time I reload. And guess what? I’ve never had a feeding problem.

I do use a modified sizing die, without bushings. My FL resizing die has been custom-honed in the neck area to give .0015″ press fit on the bullet. I also put a slightly larger radius at the neck shoulder junction. I feel that this helps to seal the chamber. With this die, I get consistent neck tension every time–without bushings. Bushings are useful when you’re fishing around for a good load. But once you find the right amount of sizing for ideal neck tension, you can do this better with a customized FL die.

6.5 Guys Review Forster Honed Full-length Dies
The 6.5 Guys have reviewed honed FL sizing dies from Forster, explaining the pros and cons of this type of reloading die. They explained that, if you load a wide variety of bullets from different manufacturers, you many want to stick with a Bushing FL die. However, if you have settled on a particular bullet and found the “ideal” neck tension, then a honed die may make sense.

In this Gear Update, the 6.5 Guys discuss a service offered by Forster Products to custom hone the neck diameter of its full-length sizing dies to the customer’s specifications (to the thousandth). Whidden Gunworks also offers custom-honed FL dies.

Permalink Gear Review, Reloading, Tech Tip 1 Comment »
January 10th, 2020

New Berger 7mm 190 Grain Long Range Hybrid Target Bullet

Berger 7mm F-Open Hybrid Long Range Target Bullet new high bc

Just in time for the Berger SW Nationals, Berger has released a class-leading new 7mm bullet — the 190 Grain Long Range Hybrid Target (LRHT). The new 190-grainer boasts a “jump-tolerant” hybrid ogive profile along with formed meplat (bullet tip) for more consistent Ballistic Coefficient (BC). In fact, with its new MRT (Meplat Reduction Technology) nose, Doppler Radar testing confirms less than 1% BC variation from bullet to bullet. While a high BC is of course desirable for competitive shooting, shot-to-shot BC consistency is most critical when engaging targets to 600 yards and beyond. The new 7mm 190gr LRHT’s BC numbers are very impressive: 0.751 G1 and 0.384 G7.

Designed for F-Open competition, the 7mm 190gr LRHTs are optimized for cartridges such as .284 Winchester, 7mm WSM, 7mm SAUM, and 7mm Remington Magnum among others.

No you don’t need a new barrel to shoot the 190s. If you are running Berger 184s in a 1:9″ or faster twist you should be fine. Berger states: “The 190gr LRHT is complementary to the industry-leading Berger 184gr F-Open Target bullet with an identical stability factor and improved ballistics when launched from 1:9″-twist barrels.”

Berger 7mm F-Open Hybrid Long Range Target Bullet new high bc

Meplat Reduction Technology for More Consistent BCs
Utilizing advanced and proprietary manufacturing processes, Bergerā€™s innovative Meplat Reduction Technology (MRT) applies controlled pressure along the nose of each LRHT bullet. Berger states this delivers ” a homogeneous and repeatable profile for the industryā€™s most consistent Ballistic Coefficients”.

“With improved MRT consistency contributing to its superior ballistic coefficient and form factor, the 190 is one of our highest performance projectiles to date. They provide minimal dispersion and more hits on target for F-Open competitors, long range shooters and larger capacity 7mm enthusiasts.” said Garett Stoddard, Bergerā€™s Lead Production Engineer.

The new Berger 7mm 190 Grain Long Range Hybrid Target Bullets are shipping now to Berger authorized retailers.

Permalink Bullets, Brass, Ammo, Competition, New Product, News 1 Comment »
January 10th, 2020

Getting the Most Out of Your Progressive Press — PowerUser Tips

Ultimate Reloader Progressive Press Hornady
Blue, Red, Green — There are many Progressive Press options on the market…

When you need ammo fast — lots of ammo, it’s hard to beat a progressive reloading press for output. We use progressive presses to load handgun ammo and .223 Rem cartridges for varmint safaris. With good dies, and proper press set-up, today’s progressive presses can produce surprisingly uniform and accurate ammo. No, you won’t see Benchrest Hall-of-Famers loading PPC cartridges on progressives. However, if you need 1000 rounds for your next prairie dog adventure, you should consider getting a progressive. Below you can see a Hornady Lock-N-Load AP configured to load .308 Winchester in bulk.

Hornady .308 winchester lock-n-load progressive press

CLICK HERE to Read Full Article

ultimate reloader progressive

UltimateReloader.com has published helpful Tips to Optimize Progressive Rifle Loading. No matter whether you have a Red (Hornady), Green (RCBS), or Blue (Dillon) progressive, this article can help you load more efficiently and produce better results. Here are some highlights:

Proper Brass Prep
Just like a good paint job requires good prep work, great rifle ammo requires good brass prep. In order to make sure your rifle loading goes smoothly, make sure to perform the following brass prep steps:

  • Clean the brass (tumble, ultrasonic, etc.)
  • Inspect brass for cracks, deep dents, etc.
  • For military brass: de-prime, ream/swage primer pockets, size with small-base sizer die (small base usually optional).
  • Measure brass length — if too long, size and then trim.
  • Final inspection before loading.
  • Cleaning primer pockets may be something youā€™ll consider (I donā€™t clean primer pockets except for rare cases or match ammo).

Smooth and Steady Pace
Since youā€™re loading rifle ammunition on a progressive, youā€™re already saving a load of time, so thereā€™s no need to rush things! Attention to detail is super-important for safety and for good results. Always keep an eye on powder level (goes down FAST) and whatā€™s happening at each station.

The Right Press and Press Setup
Look for a heavy-duty, well-built press that will stand up to rifle loading. Youā€™ll also want to make sure your powder measure will have the proper capacity (~25 grains for .223, ~50 grains for 308). If you are bulk reloading, ensure you have enough stations for sizing, charging, powder check, bullet feed, bullet seating, and (optional) bullet crimp. Compare the powder measuring systems, and give careful consideration to the priming process. You want case priming to be 100% reliable. This video reviews the differences between the Dillon XL-650 and the new XL-750 Progressive presses.

More Ultimate Reloader Resources for Users of Progressive Presses:

Permalink Bullets, Brass, Ammo, Gear Review, Reloading No Comments »
January 10th, 2020

Firearms Fashion — T-Shirts for Gun Guys and Gals

Some of our Shooters’ Forum members have asked for t-shirts with AccurateShooter.com logos. Sorry folks, we don’t offer those for sale, but we have searched the internet and found ten great t-shirts for gun guys and gun gals. Most of these shirts are available is multiple sizes, and many offer color choices. You’ll find over 100 more gun-themed shirts at the Etsy.com online store.

Click on each shirt image for more specs and purchase options:

Here’s one for 1911 fans…

This may offend your golfing buddies.

Yes, shooting can be therapeutic…

All too true these days…

Here is one for the Ladies…

Beware the gal wearing pink.

Daily routine of dedicated shooters.

Two Firing Pins say “I’d hit that”.

Look carefully, that’s not a steer’s skull.

This is certain to annoy Starbucks liberals.

Permalink New Product No Comments »
January 9th, 2020

New Wind-Mapping Technology in Trijicon Ventus Rangefinder

Ventus X collimated laser rangefinder wind reading Ballistics app LIDAR Doppler

To be honest, when we read the description of Trijicon’s new Ventus device, we thought it sounded like science fiction. This quad-collimated laser rangefinder/wind-reading gizmo seems like something Captain Kirk would use on Star Trek. According to Trijicon, the Ventus is “the worldā€™s first advanced wind-mapping and range-detecting handheld device.” That’s right folks, this is a rangefinder that also “measures three-dimensional wind velocities at multiple distances out to 500 yards”. Combined with a claimed 5000-yard ranging ability (on reflective objects), Trijicon says its new Ventus gives “shooters and hunters previously unattainable data about their environment for long-range accuracy.”

The Ventus unit is designed with a Doppler LIDAR engine that can measure headwind, tailwind, crosswind and vertical wind components at six different distances, in any weather condition. The higher-end Ventus X Model also includes an onboard ballistics solver which communicates, via Bluetooth, with the Trijicon Ballistics App. This allows Ventus-X users to store shooter and target geographic locations, calculate ballistic solutions, and display wind maps.

Ventus X collimated laser rangefinder wind reading Ballistics app LIDAR Doppler
The Ventus utilizes an advanced Doppler LIDAR engine and four collimated lasers sent out in a cone to measure wavelength interaction with dust particles at up to six different distances.

Four Collimated Lasers Read the Wind via Doppler LIDAR
How does the wind-reading work? Trijicon states: “Thanks to a fiber optic collimated laser capable of returns through dust, fog, sleet, and snow, the Ventus offers extreme, all-weather performance. Four collimated lasers [are] sent out in a cone to measure wavelength interaction with dust particles at up to six different distances. This technology allows the Ventus to calculate for head, tail, cross and vertical wind, giving shooters an incredibly accurate wind reading.”

Ventus X collimated laser rangefinder wind reading Ballistics app LIDAR Doppler

Ventus X Model Includes Advanced Ballistics Solver
The Ventus comes in two models: Ventus and Ventus X. The basic Ventus handles ranging duties. The upgraded Ventus X adds a state-of-the-art, onboard ballistics solver. An onboard sensor suite captures all necessary data — range, wind, atmospheric temperature, stratospheric pressure, and incline angle — to provide a very advanced ballistic solution.

Ventus X collimated laser rangefinder wind reading Ballistics app LIDAR Doppler

The Ventus X also communicates via Bluetooth to the advanced Trijicon Ballistic application, soon to be available for both iOS and Android. The Ballistic App stores shooter and target geographic locations, provides a ballistic solution, and displays a wind map overlay of readings.

DISCUSS HERE in our Shooters’ Forum Ventus Thread »

Price and Availability
Trijicon says both Ventus and Ventus X units should be available in the “Second Half of 2020″. MSRP unknown at this time.

Permalink - Videos, Hunting/Varminting, New Product, News, Optics 6 Comments »
January 9th, 2020

GUN INFO 101 — Headspace Defined and Illustrated

Ultimate Reloader Brownells headspacing go gage gauge barrel gunsmithing
This illustration shows headspace measurement for the popular .308 Winchester cartridge, which headspaces on the shoulder. Image copyright 2015 Ultimate Reloader.

In this Brownells Tech Tip, Brownells gun tech Steve Ostrem explains what headspace is and why it’s one of the most critical measurements for nearly all firearms. Even if you’re an experienced rifle shooter, it’s worth watching this video to refresh your understanding of headspace measurements, and the correct use of “GO” and “NO-GO” gauges.

Headspace Definition
In firearms, headspace is the distance measured from the part of the chamber that stops forward motion of the cartridge (the datum reference) to the face of the bolt. Used as a verb, headspace refers to the interference created between this part of the chamber and the feature of the cartridge that achieves the correct positioning. Different cartridges have their datum lines in different positions in relation to the cartridge. For example, 5.56x45mm NATO ammunition headspaces off the shoulder of the cartridge, whereas .303 British headspaces off the forward rim of the cartridge.

If the headspace is too short, ammunition that is in specification may not chamber correctly. If headspace is too large, the ammunition may not fit as intended or designed and the cartridge case may rupture, possibly damaging the firearm and injuring the shooter. (Source: Wikipedia)

Forster Headspace diagram belted magnum rimfire

Go gauge gage NOGO no-go field gaugesHeadspace Gauges
Headspace is measured with a set of two headspace gauges: a “Go” gauge, and a “No-Go” gauge. Headspace gauges resemble the cartridges for the chambers they are designed to headspace, and are typically made of heat-treated tool steel. Both a “Go” and a “No-Go” gauge are required for a gunsmith to headspace a firearm properly. A third gauge, the “Field” gauge, is used (as the name implies) in the field to indicate the absolute maximum safe headspace. This gauge is used because, over time, the bolt and receiver will wear, the bolt and lugs compress, and the receiver may stretch, all causing the headspace to gradually increase from the “factory specs” measured by the “Go” and “No-Go” gauges. A bolt that closes on “No-Go” but not on “Field” is close to being unsafe to fire, and may malfunction on cartridges that are slightly out of spec. (Source: Wikipedia)

To learn more, read Brownell’s longer article Headspace Gauges and How to Use Them. Among other things, this explains the relative lengths of “Go”, “No-Go”, and “Field” gauges. The “Field” is actually the longest: “The GO gauge corresponds to the SAAMI (Sporting Arms & Ammunition Manufacturerā€™s Institute) minimum chamber length, while the FIELD gauge usually matches the maximum chamber depth, or slightly less. NO-GO gauges are an intermediate length between minimum and maximum, that, technically, is a voluntary dimension. A firearm that closes on a NO-GO gauge and does not close on a FIELD gauge may not give good accuracy and may have very short cartridge case life from the ammunition re-loaderā€™s standpoint.”

Permalink - Videos, Bullets, Brass, Ammo, Gunsmithing, Tech Tip No Comments »
January 9th, 2020

Comfortable, Low-Profile 27dB NRR Muffs for $6.99

ear muff earmuff 27 nrr db kryptek highlander passive deal $6.99
Note: You get one set of muffs (either gray or camo, NOT both) for $6.99 plus S/H.

Good muffs that offer 27 db Noise Reduction and won’t spoil your cheekweld — for under seven bucks? Can’t argue with that. Right now CDNN is offering a killer deal on Kryptek Sound Soldier 27 NRR muffs that sell elsewhere for around $21.00. Get these in Highlander Camo or Typhon Grey for just $6.99. That’s right, comfortable 27 NRR muffs for seven bucks a set.

These passive muffs have low profile shells engineered to stay out of the way when shouldering your weapon. The ergonomic headband keeps the muffs aligned, in their proper position. Purchasers report the soft leatherette ear seals are surprisingly comfortable. These muffs provide a pretty high NRR considering the low profile design. And the price, just $6.99 on sale, is hard to beat! NOTE: Other vendors have a more conservative 25 NRR for these type of muffs. That’s still quite good.

These affordable Kryptec Muffs are a good “back-up” item to keep in your vehicle or in your range kit. Though there are certainly higher-quality muffs, these Kryptecs function adequately for most shooting and hunting purposes. However, for maximum hearing protection, we do recommend running quality ear-plugs UNDER the muffs for double protection. Some government studies suggest that properly inserted ear plugs under muffs can improve the effective NRR by 3 dB. The top-rated plugs have a 32 dB NRR by themselves.


Why You Should Always Protect Your Hearing

“Science tells us that exposure to continuous noise of 85 dB for eight hours is enough to cause permanent hearing loss, and worse, spikes of 130 dB and more can result in permanent hearing damage instantly.”
Source: NRA Blog.

The Risk of Hearing Loss
Hearing loss can be progressive and irreversible. If you are a shooter, this is serious business. As the NRA Blog cautions: “You may not even realize youā€™re harming your hearing. Hearing loss occurs gradually, and can go effectively unnoticed until symptoms become severe. By then, the damage is done.”

Nobody wants to go deaf. But we often see shooters without effective hearing protection when they are walking around a few yards behind the firing line. That’s bad — even if you are away from the firing line, gunshot noises can damage your hearing. You MUST use effective hearing protection every time you go to the range. Good foam earplugs costs mere pennies but they can prevent deafness in your later years. Many folks also wear muffs over plugs.

Sound Levels for Common Noises:

9mm Luger pistol: 160 dB

Jet aircraft engine (near): 140 dB

.22 LR pistol: 134 dB

Normal human pain threshold: 120 dB

Noisy Nightclub: 110 db

Riding Motorcycle at 65 mph: 103 db

Power Lawnmower: 95 dB

Hearing damage possible: 85 dB (sustained for 8+ hours)

Ringing Telephone: 80 dB

Normal conversation: 60 dB

Permalink Gear Review, Hot Deals No Comments »
January 8th, 2020

New-for-2020 Handguns — SHOT Show Pick Six Preview

new 2020 shot show pistol handgun revolver wheelgun colt python kimber korth Smith wesson

When covering SHOT Show 2020 our reporters will focus primarily on rifles, optics, and reloading equipment, because this website is dedicated to rifle accuracy. However we know many of our readers are interested in semi-auto pistols and revolvers, and we bet the majority of our Forum members own handguns. This Editor has competed in various pistol disciplines and I still love my semi-autos and wheelguns. So, for you fellow pistoleros out there, here’s our “Pick Six” — a half-dozen new handguns (both semi-auto pistols and revolvers) — all new for 2020.

1. Korth (Nighthawk Custom) — Korth Ranger

nighthawk custom Korth Ranger .357 Magnum Germany wheelgun pistol handgun

The new German-made Korth Ranger revolver is one of the most impressive wheelguns you can buy — at any price. Sold in the USA by Nighthawk Custom, Korth revolvers feature best-in-the-world workmanship, superb triggers, and outstanding accuracy. Designed for revolver match shooting, the Korth Ranger features a top Picatinny rail for Red Dot optics. The barrel shroud has lightening cuts which reveal a Lothar Walther match barrel with target crown.

2. Ruger 57 — New Competition Pistol for 5.7×28 Cartridge

new ruger high-velocity 5.7x28 mm FNH pistol handgun

The all-new Ruger 57 is an impressive full-size pistol with 4.94″ barrel. This looks like it will be a hoot to shoot. The 5.7×28 cartridge is a high-velocity, low recoil round — sort of a 22 WMR on steroids. Expect to get close to 1700 fps from a 40gr cartridge. We expect this long-slide pistol will be used mostly for gun games, but with a 20-round magazine, it certainly can handle self-defense duties too. According to a recent VIDEO REVIEW by 22Plinkster, the new Ruger 57 performs well. READ Ruger 57 Field Test.

3. Colt Python for 2020 — Stainless with 4.25″ or 6″ Barrels

New Colt Python stainless steel revolver wheelgun .357 Magnum dirty harry
The 4.25″ barrel Python is 9.75″ long and 42 ounces. The 6″ model is 11.5″ long and 46 ounces.

The Snake is back baby! For 2020, Colt’s Manufacturing Co. LLC will offer a refined and upgraded Colt Python with a hefty $1499.00 MSRP. The legendary double-action revolver, which originally debuted in 1955, returns in stainless steel in 4.25″ and 6″ barrel lengths. It is designed to be stronger than before. Numerous improvements were made to reinforce the revolver, including the use of stronger stainless steel alloys and a re-designed rear sight which allows for a 30% increase in the cross-sectional area of the top strap ā€” meaning more steel for a stronger revolver.

4. Keltec P17 — New Compact, Budget-Priced .22 LR Pistol

Keltec p17 .22 LR 22LR rimfire pistol handgun

Keltec’s new P17 rimfire pistol is lightweight, easy to handle, and features a fiber optic front sight and an adjustable rear. Priced at just $199.95 MSRP, the .22 LR P17 has 16+1 round capacity and ships with three, 16-round magazines. This is a small pistol — it weight just 14 ounces and OAL is 6.65ā€³. Keltec states: “The new, affordable P17 pistol makes range days a lot less expensive and far more fun.” With low cost .22 LR ammo and a 16+1 capacity, this should be fun to shoot.

5. Ruger Super GP100 Revolver in 9mm Luger (9x19mm)

Ruger 9mm 9x19mm luger Revolver GP100 Super GP 100 competition pistol

The 9Ɨ19mm Parabellum (aka 9mm Luger) cartridge was introduced in 1902 by German weapons manufacturer Deutsche Waffen und Munitionsfabriken (DWM) for the Luger semi-auto pistol. Now 118 years later, Ruger is bringing us a sturdy, 6″-barrel revolver for this popular cartridge. Ruger adapted its existing Super Redhawk frame for this Super GP100 9mm revolver, which features a rather short 8-round PVD-coated cylinder to better fit the 9x19mm round. According to Guns.com the 9mm GP100 “uses a cylinder and extractor cut for moon clips to speed up reloading [and] sports a 6-inch half-lug sleeved and shrouded barrel with an 11-degree target crown[.]”

6. Wilson Combat — Experior Series 1911 Pistols

Wilson Combat’s new Experior handguns feature match-grade components, sweet triggers, and accuracy guarantees. Wilson states that “The Experior lineup [is] the most fully-loaded package we offer, showcasing nearly every tactical, functional and cosmetic option as a standard feature. They are a unique blend of classic 1911 design, paired with modern-day reliability and ergonomic enhancements[.]” Experiors will be offered in both 9mm and .45 ACP in a variety of barrel lengths. There will be both single-stack and double-stack Experior models.

MORE HANDGUNS HERE: You’ll find 18 other new-for-2020 pistols featured on the Guns Holsters & Gear (GHG), Shot Show 2020 Preview Page

BONUS — Upgraded for 2020
Smith & Wesson M&P M2.0 C.O.R.E. Pro Series Pistols

Smith & Wesson M&P 2.0 pistols were introduced back in 2017, so they aren’t new. But for 2020, S&W is offering Performance Center variants with cool new features. The New M&P M2.0 Performance Center pistols include porting and Competition Optics Ready (C.O.R.E.) slides. Chambered in 9mm and .40 S&W, the new Performance Center M&P M2.0 pistols are available with either a 4.25″ or 5″ barrel. Features may include ported barrels and slides and fiber optic sights. For those looking to mount an optic without custom work, the new C.O.R.E. pistols have slides cut for optics straight from the factory. These will support the majority of popular pistol reflex sights.

Smith Wesson Performance center M&P M2.0 competition

Permalink - Articles, Gear Review, Handguns, New Product 1 Comment »
January 8th, 2020

Primer Pocket Rocket — Another Reason to Use Eye Protection

Primer Blown Gas defect winchester casehead

A few years back, Our friend Grant Guess had a “close encounter” with a bad primer. An apparently defective primer caused part of the casehead on one of his rounds to blow out. This, in turn, allowed high pressure gas to vent through the damaged primer pocket. Take a good look, boys and girls. This is yet another very good reason to wear safety glasses. The cartridge was a 6.5-06, handloaded in necked-down Winchester-headstamp .270 Win brass. Grant reports:

“I had a blow through between the primer and the primer pocket today. The action was really smoking and I got a face full of gas. This was a reasonably light charge. Thank God for safety glasses.

I should also mention that it appears there is a 3/64 hole that is halfway between the primer and the primer pocket. Like it burned a small jet hole through both of them.”

Could this happen to you? It just might. On seeing this damaged case, one of Grant’s Facebook friends, Chris D., observed: “Search the internet, you will see a lot of these pin hole ‘in the corner’ failures. Obviously Winchester has some issues with the LR primers.”

Careful Examination Reveals Apparent Primer Defect
After this incident, Grant examined the damaged case: “I pinned the flash hole and it is not over-sized or under-sized. The primer clearly has an area where it had a defect. At [50,000 CUP], it doesn’t take much of a defect to cause issues. There was a slight bit of pucker-factor on the next shot….”

Primer Blown Gas defect winchester casehead

Permalink Bullets, Brass, Ammo, Tech Tip 8 Comments »