Today, September 26, 2020, is National Hunting and Fishing Day (NHFD). On this day we recommend you take new shooters afield and introduce them to shooting or hunting. The NFHD website has helpful resources for hunters.
Getting the right introduction to hunting ensures a quality experience and the start to a lifetime of enjoyment. Many hunters receive their first introduction to hunting from family or friends as a tradition passed down from generation to generation.
For all hunters, whether they have mentors to guide them or not, the most important first step into the woods begins with a state-certified hunter education course.
Game Resources — To learn more about different game species, click these NSSF links:
FREE Printable Deer Hunting Target
To help you prepare for a fall hunt, here is a free, printable Deer Practice target. Hone your skills on a trio of bucks with a red bullseye centered on the animals. You can print the targets in black and white, but they look best in color. Right-click the image below to download a FREE printable PDF file.
This is heartening — folks are shooting at Camp Perry again. Some normalcy has returned to the world (despite the ongoing pandemic). Though the CMP National Matches were cancelled in summer 2020, shooting returned, on a smaller scale, in the fall. The CMP hosted a Garand-Springfield-Modern and Vintage Military (GSMM) Rifle Match on Camp Perry’s Petrarca Range on September 14th.
Competitors on the line greeted each other with warm smiles and swapped stories of missed competition over the last few months – some traveling from as far as Virginia with the hopes of enjoying Camp Perry after the cancellation of the National Matches (typically an annual tradition for marksmen). Others admitted the Petrarca Match was their first time in competition since last year’s National Matches. So, for those in attendance, this event did represent a positive return to normalcy during this challenging year.
The GSMM Match was subject to strict health and safety guidelines. Participants practiced social distancing and wore masks when not firing. The CMP team also employed sanitation procedures for the facility.
The morning started off soggy as rain moved through the range area along the shores of Lake Erie, clearing off before the first relay to leave a gray backdrop. The weather quickly improved through early afternoon as the sun appeared and warmed the air, making for a pleasant return to the firing line for later relays.
Winning overall in the Garand competition was Jeffrey Cramer, 66, with a 266-3X Aggregate. Jace Diezman, 59, led the Springfield category with 266-2X, as SFC Charles Novak, 55, won the Vintage Military class, with a score of 254-1X. Joe Rondon, 53, won Modern Military with a score of 281-5X over the day.
Modern Kongsberg Electronic Targets for Rapid Scoring
Petrarca Range is home to CMP Targets, powered by the Kongsberg Target Systems (KTS) of Norway. The lineup of electronic targets utilized on the range allows competitors to watch their shots on monitors located at each firing point eliminating the need for pit duty and dead range time.
With hunting season underway (or coming up soon), we know that many readers will be out in the field — with a set of binoculars. On most game hunts, you’ll speed a lot more time glassing with binocs than looking through your riflescope. With wide field of view and extended low-light capability, a good set of binoculars will be your most important game-finder. And with premium LRF binoculars, such as the new Vortex Fury, one tool serves both for spotting and laser ranging.
“Without the stabilization of your binoculars [provided by] a tripod … you will be missing a majority of the game you are glassing for.” — Outdoorsmans.com
In this article, Vortex Optics’ Mark Boardman, an experienced hunter, explains the benefits of using a tripod with high-magnification binoculars. Everybody knows that powerful spotting scopes work best when mounted to a stable tripod or otherwise secured to a steady mount. Yet when most folks use binoculars, they never even think of using a tripod, despite the fact that tripod adapters are available for many premium binoculars.
Outdoorsmans Tripod Adapters Outdoorsmans.com sells tripod adapters for various kinds of binoculars. These really work: “Mounting your binoculars to a quality tripod is a must for the serious western hunter. Without the stabilization of your binoculars [by] mounting them to a tripod … you will be missing a majority of the game you are glassing for.”
A serious hunter should learn how to glass with tripod support, using methods outlined here. With binoculars offering more that 8X magnification, you can really benefit from a steady mount. You’ll be amazed at the difference the tripod will make.
Story tip by EdLongrange. We welcome reader submissions.
True Velocity is a Texas-based ammo-maker with 145 issued patents on its products and technologies. More than 1 million rounds of True Velocity composite-cased cartridges will be delivered through 2020-2021 to the U.S. Army. This revolutionary new ammo will be tested by the U.S. Army’s Next Generation Squad Weapons program. The advantage of the composite cases, which employ various polymers, is primarily weight savings. True Velocity-made ammo is 30% lighter than conventional ammunition. That means that a typical soldier’s load-out can be reduced by many POUNDS with this innovative ammo. And the military can transport much more ammo with existing vehicles and aircraft.
The company claims: “True Velocity’s precision engineering and manufacturing capabilities allow for substantial improvements in consistency over brass. Our proprietary technology and manufacturing process, combined with progressive process and quality control standards … yields a cartridge of unparalleled performance.” In addition, True Velocity can produce ammo in smaller facilities than a typical large ammo plant. The company states: “The company’s manufacturing capabilities can power customizable and highly-portable ‘cells’, allowing for decentralized and automated ammunition production.”
True Velocity’s modern composite cases withstand temperature changes very well and can function well even in sub-zero environments (however you still may have issues with the powder inside at super-low temps). In addition, the composite cases are 100% recyclable. This can make a difference for shooting ranges and training facilities. One question we have, however, is long-term durability. Brass cartridges can remain strong and functional for decades. Some plastics degrade in just a few years. It will be interesting to see how the True Velocity composite cases hold up over time.
True Velocity is an advanced technology and composite manufacturing company based in Garland, Texas. Founded in 2010, True Velocity has more than 250 patents pending or issued on its products, technology, and manufacturing processes. True Velocity products are manufactured in the U.S. in a state-of-the-art, 66,000-square-foot facility and are currently available to public agencies, with consumer products available soon. For more information, visit TVammo.com.
Ever wondered what caused a particular bulge or marking on a case? And more importantly, does the issue make the case unsafe for further use? Sierra Bullets Ballistic Technician Duane Siercks offers some insight into various issues and their causes in two Case Diagnostic articles from the Sierra Blog.
Incipient Case-Head Separation
This is a Winchester .308 Win case that has a real issue. This case has a very obvious incipient case head separation in the process of becoming a complete failure.
This is most commonly caused by over-sizing the case causing there to be excess headspace on the case. After a few firings and subsequent re-sizing, this case is just about ready to come completely apart. Proper die adjustment is certainly a requirement here. Of course this case is not safe to reuse.
Excessive Pressure (Load Too Hot)
If you will notice in the picture of the case rim, there are two pressure signs to notice. First, look at the primer. It is basically flattened to about the max of what could be considered safe. If this was the only pressure sign noted, I would probably be fine with this load, but would constantly keep an eye on it especially if I was going to use this load in warmer temperatures. This load could easily cross into the “excess pressure” realm very quickly.
There is another sign of pressure that we cannot ignore. If you’ll notice, there is an ejector mark apparent that is located over the “R” of the R-P headstamp. This absolutely tells us that this load would not have been in the safe pressure range. If there were any of these rounds loaded, they should not be fired and should be dis-assembled. This case should not be reloaded.
Split Case-Neck
Here we have an R-P .22-250 case that has died the death. Everything looks fine with this case except the neck is split. This case must be tossed.
A split neck is a normal occurrence that you must watch for. It is caused by work-hardening of the brass. Brass cases get harder with age and use. Brand new cases that are stored for a period of time can become hard enough that they will split like this case within one to two firings. I have had new factory loads do the same thing. Then as we resize and fire these cases repeatedly, they tend to get harder and harder. Eventually they will split. The life of the case can be extended by careful annealing practices. This is an issue that would need to be addressed in an article by itself. Of course this case is no longer usable.
In the classes that I teach, I try to use examples like this to let the students see what they should be looking for. As always, if we can assist you, whether you are new to reloading or very experienced, contact us here at Sierra Bullets by phone at 1-800-223-8799 or by email at sierra@sierrabullets.com.
Dented Case Body
Here we have a Lake City 7.62×51 (.308 Win.) case with two heavy marks/dents in the case body.
This one may be a bit of a mystery. It appears as if this case may have been caught in the action of a semi-auto rifle when the firearm jammed or the case failed to clear during the cycling process. I probably would not reload this case just to prevent any feeding problems. This also appeared to be a factory loaded round and I don’t really see any pressure issues or damage to the case.
Multiple Problems — Lake City 5.56×45 unknown year.
This case has suffered multiple failures and cannot be re-used. First its has have a very rounded shoulder that is split. Upon first look it was obvious that this round had been a victim of excess pressure. The firearm (perhaps an AR?) was apparently not in full battery, or there was possibly a headspace issue also. While taking a closer look, the primer was very flat and the outside radius of the primer cup had been lost. High pressure! Then I also noticed that there was an ejector mark on the case rim. This is most certainly an incident of excessive pressure. This case is ruined and should be discarded.
It is very important to observe and inspect your cases before each reloading. After awhile it becomes second nature to notice the little things. Never get complacent as you become more familiar with the reloading process. If ever in doubt, call Sierra’s Techs at 1-800-223-8799.
MagnetoSpeed’s technology has completely changed the market for firearms chronographs. With a MagnetoSpeed barrel-mounted chrono you can quickly and easily record muzzle velocity (MV) without having to set up tripods or walk down-range. The compact MagnetoSpeed chronos are easy to set up and transport. With the full-featured V3 model, everything you need comes in a small fitted case. In the top photo are the components used with the MagnetoSpeed V3 Kit:
1. V3 Bayonet sensor
2. Display and control unit
3. Bayonet spacers (plastic and rubber)
4. Cords and mounting hardware (left), suppressor heat shield (right)
5. Alignment rod (square cross-section)
6. Rail adapter (sold separately)
Our friend Gavin Gear of UltimateReloader.com reviewed the MagnetoSpeed V3 and came away impressed. Gavin explains that a good chrono is essential: “If you want to load and shoot precision ammunition, you need the tools that will produce and validate the precision of your loads. A good chronograph is one of those tools! In this post I’m going to introduce you to the MagnetoSpeed V3 chonograph, the high-end electromagnetic chronograph which fills out the top slot in MagnetoSpeed’s equipment portfolio.”
In this 11-minute video Gavin reviews MagnetoSpeed’s top-of-the-line V3 Chronograph. He shows what ships with the unit, how to set it up for both rifles and pistols, and then he puts it through its paces showing how it captures velocity data. Gavin says he will follow-up with future videos showing how to link the MagnetoSpeed V3 to your mobile phone and how to log velocity data for future reference. To learn more about this high-tech chrono, visit UltimateReloader.com.
We’ve done some bullet casting in the past, both for handgun bullets, and the large, heavy (400gr+) projectiles used with Black Powder Cartridge Rifles. We can say, unequivocally, that newbies should seek out the assistance of a skilled, experienced mentor, who is familiar with the important safety procedures that must be employed. Working with molten lead can be dangerous. And it also takes some skill to get good results (without visible casting flaws), particularly with very large bullets.
There are valuable resources that can help you get started with the casting process. Wolfe Publishing offers two DVDs that cover the bullet casting process from start to finish. Bullet Casting 101 takes you through the basics: showing you how to choose the correct alloy for your application, prep molds, maintain the optimal temperatures, and lube and size bullets. The important steps are laid out clearly. In addition, Bullet Casting 101 helps you select the right equipment and preferred molds for your particular application. (To create uniform rifle bullets that shoot accurately, you really do need high-quality molds.)
Wolfe Publishing offers a companion DVD, Casting Premium Bullets for Handguns, that covers more advanced techniques for high-volume pistol bullet production. This DVD covers both single-cavity molds and multiple-cavity “gang” molds. (Gang molds can be frustrating at first; it is harder to maintain perfect temp control and mold separation is more complex). The DVD also reveals the sources of most common casting flaws, and explains how to detect cracks, voids and other common problems.
You’ll save considerable time and effort if you really understand how to avoid common mistakes before you start pouring lead. And you’ll get the best results if you learn how to “blend” the optimal alloy for the job. Maintaining the right mold temperature is also critical for good results. These topics and more are covered in these two DVDs, priced at $20.00 each on Amazon.
Good Books about Bullet Casting
Along with these DVDs, there are some excellent print resources about bullet casting. Here are two good bullet casting books we recommend. Every serious bullet caster should own Lyman’s Cast Bullet Handbook, now in its 4th Edition. We also like Casting Premium Bullets for the Black Powder Cartridge Rifle by Paul Matthews (Wolfe Publishing).
We used the Matthews book to improve our cast bullets for a Pedersoli 45/70. Notably, with factory-made cast bullets, that rifle shot about 3″ groups at 100 yards. With custom cast bullets, accuracy was nearly twice as good. We were also able to choose a custom mold that produced bullets with a much higher BC, which helped with long-range matches.
Looking for a good load for a new rifle? Or perhaps you want to try a new powder and bullet combo for an existing rig. One of the best places to start for load data is Hodgdon’s online Reloading Data Center for pistol, rifle, and shotgun reloaders. Check out the Reloading Data Center at www.HodgdonReloading.com.
In the Data Center, you’ll find thousands of load recipes for pistol, rifle, and shotgun. Rifle shooters will find dozens of loads for their favorite Hodgdon, IMR, and Winchester powders such as H4198, H4895, Varget, H4350, and IMR 8208 XBR. And Hodgdon’s Reloading Center is “mobile-friendly” so it works well with smartphones and tables. Navigation is easy, and you can set the search criteria easily choosing your favorite powder or bullets. After choosing a cartridge, you can pre-select specific bullet weights and powder types. That quickly delivers just the information you want and need. You won’t have to scroll through scores of entries for bullets or powders you don’t use.
Mobile users will notice that the current Hodgdon Reloading Center is much more “user-friendly” for smart-phone and tablet users. Controls have been optimized for touch-screens, and buttons are large and easy to use. Likewise the results are displayed in a large, easy-to read format.
How to Get Started with Handloading
Getting started in Reloading? Ultimate Reloader offers a helpful introductory video that covers the basics. In addition, a recent Ultimate Reloader article reviews the types of reloading presses, plus the other gear you’ll need, from dies to powder dispensers.
If you want to stay current with trends in the firearms industry, and see important new product releases before they hit dealers’ shelves, you should check out Shooting Industry magazine. While tailored for firearms/outdoor gear retailers and industry professionals, this monthly journal also provides valuable information for all gun owners. We read Shooting Industry to learn about sales trends, new products, and current gun laws issues.
READ for FREE — Shooting Industry is now available in a digital format for FREE. There are free archives going back 13 years to December 2007.
Get FREE Digital Shooting Industry Magazines for the Past 13 Years
You can access, for free, nearly 13 years of Shooting Industry back issues, plus all the recent 2020 issues. CLICK HERE for the current issue along with all issues for the last three years: 2018, 2019, 2020. IMPORTANT — To access older issues, you much first launch a recent digital edition. That will give you access to the full 13-year archive, as explained below.
Here are links for the last three issues — July, August, and September 2020. Simply click each cover to read full issue for FREE:
SEPTEMBER 2020
Top Stories:
Gun Storage in Pandemic
Tracking Big-Game Hunters
AUGUST 2020
Top Stories:
Self-Defense Long Guns
Pandemic Spurs Hunting
JULY 2020
Top Stories:
First-Time Gun Buyers
U.S. Firearms Industry Today
How to Access Magazine Archives Back to December 2007
Once you have launched the digital version of a recent issue, you can access the past 13 years of Shooting Industry back issues by using the ARCHIVE Button. First click on the MENU icon (three horizontal lines). Then click on the link for ARCHIVE. When you click on “Archive”, a list appears on the right. Scroll down to select any issue from September 2020 back to December 2007.
BONUS! FREE Back Issues of GUNS Magazine and American Handgunner
In the Shooting Industry Archives, you will also find free digital editions of GUNS Magazine and American Handgunner. These will be found in the archive tables on the right. Just look for GUNSxxxx in the list entry for GUNS Magazine back issues, or AHxxxx for American Handgunner back issues.
Next Saturday, September 26, 2020, is National Hunting & Fishing Day. The annual celebration takes place on the the 4th Saturday of September every year. National, regional, state and local organizations will run thousands of “open house” hunting- and fishing-related events around the country. Events will include Fishing Derbys, Hunting Expos, Wing-shooting tournaments, and much more.
Hunting Safety Checklist
A good hunt begins with preparation. And during the hunt, safety is a key priority. To help hunters, the National Shooting Sports Foundation (NSSF) has created a Safety Checklist for hunters. This Hunting Safety Checklist, produced as part of the NSSF’s “Hunt S.A.F.E.” campaign, helps hunters follow good, safe practices in the field and at home.
Outdoorsmans Tripod Adapters
