In our Shooters’ Forum, there’s an interesting thread about a very light hunting rifle. Featuring a Defiance ultra-light all-steel action, this 6.5×57 Lapua lightweight tips the scales at just 4.93 pounds including scope and rings! For reference, a half-gallon of milk weighs 4.3 pounds, so this rifle is LIGHT! Here’s a report from the proud owner who built the rifle for a future Kodiak Island Alaska mountain goat hunt.
Ultralight Rifle Report by Forum Member Dave
I decided I wanted the challenge of a Mountain Goat hunt after I turn 60. It was the perfect excuse to put together an ultralight, something I had wanted to do for years. I wanted to see how light a bolt action rifle could actually be. My goal was to stay under 5 pounds, without going to a Titanium action, including rings and scope. I knew this would be difficult but I did manage to achieve the goal.
I started with a Defiance anTi model Rem Model 7 short action. This is an extremely smooth action that weighs just 19.2 ounces in this size. I had Carson Lilja of Lilja Barrels program a barrel taper to my dimensions for a 6.5mm 1:8″-twist stainless, 3-groove 22″ barrel. As fitted in the rifle, the barrel is free-floated except for the first inch or so forward of the action.
Other rifle components are: Bix n Andy Dakota trigger, aluminum trigger guard, blind magazine with an aluminum follower, titanium action screws, and a Leupold 3-9X lightweight optic in Talley rings. I also had an aluminum adapter installed in the for-end to accept a magnetic mount Javelin carbon fiber bipod.
The rifle was chambered up in 6.5×47 Lapua by my friends at Sportsman’s Outfitters in Knox, Pennsylvania. Then I sent the barreled action to Wayne at Oregunsmithing (Pendleton, OR) to have a Kevlar stock built. The stock weighs a whopping 14 ounces! When it came back I had everything Cerakoted (see bottom photo before coating). This stock was a full custom, built around my barreled action. Wayne’s work was reasonably priced with a 3-month turn around.
Excellent Accuracy — 5/8″ Three-Shot Groups at 100 Yards
Now it was time to shoot the rifle and I was not disappointed. It shoots both Barnes TTSX 100s or Swift Scirocco II 130s into 5/8″ at 100 yards. Off a bipod at 400 yards, three go into 3″ or so. This thing is crazy light even though it wears a 22″ barrel.
Without scope and rings, before Cerakoting the action and barrel, this 6.5×47 rifle tipped the scales at a mere 4.20 pounds (67.2 ounces). Check it out:
Do you ever use military-style brass with swaged primer pockets? Then you can really benefit from the new LEE Ram Swage tool. This innovative swaging tool provides a fast, simple, and efficient method of removing the primer pocket crimp on milsurp brass.
Primer pocket swaging is necessary when reloading brass with crimped primer pockets. Many brands of brass for military (and some law enforcement) applications have this crimp. You may find such primer pocket crimps on a variety of milsurp brass types including: 9mm Luger, LEO .40 S&W, .45 ACP, .223 Rem (5.56×45), .308 Win (7.62×51), and .30-06 Springfield, as well as older European cartridge types such as 6.5×55. If you use a progressive press, this new LEE Ram Swage is a boon. Nothing reduces priming problems on a progressive press more than properly swaged primer pockets.
Why use milsurp brass? Surplus military and police department brass is a great low cost source of cases. It is typically very strong, long-lasting, and can often be acquired for a fraction of the cost of new commercial brass. For example, Lake City 7.62×51 (.308 Win) brass is excellent.
Note: This tool is designed for Boxer-primed cases only, not cases with Berdan Primers.
The Lee Ram Swage works on all single stage presses with 7/8″-14 frame threads, and rams which take common “universal” shell-holders. This new tool features spring-assisted case extraction, and an all-steel case guide. This ensures that your cases will be positively centered on the push rod. The swage holder, large or small, installs in seconds into your press ram with no adjustments required.
LEE’s engineers devised a clever “Shell-holderless design” for the LEE Ram Swage. This allows you to swage any small or large primer pocket, without swapping to a different size shell-holder. The hardened steel swage punch is automatically extracted from the primer pocket by five disc springs. The complete LEE Ram Swage set includes one guided 7/8″-14 threaded swage push die, with both large and small ram swage holder assemblies.
Popular Powders In Stock at Brownells at Reasonable Prices
We all know that reloading powders have been hard to find. And when you do find an appropriate powder, some vendors are asking crazy high prices. Well we’re pleased to report that Brownells has a number of popular powders IN STOCK today (11/20/2021), and the prices are quite fair, starting at $24.99 per pound for Ramshot Competition. Grab some excellent Hodgdon H380 for $33.99 per pound, or IMR 4198 for $38.99 per pound. CLICK HERE to see all available in-stock powders at Brownells today.
Save Money with Brownells Discount Codes
While you’re shopping at Brownells, don’t forget to use one of the current Discount Codes to save money. There are many current codes that can save you up to 10% on your purchase. And with special Pre-Black Friday Code RTC you get $30 off $300 PLUS FREE Shipping and handling through November 23rd at midnight. Fill in the applicable Code during checkout.
Current Brownells Discount Codes:
Code FR6: $85 off $875
Expiration date November 30, 2021
Code FR5: $55 off $575
Expiration date November 30, 2021
Code RTC: $30 off $300 and FREE Shipping/Handling
Expiration Date November 23, 2021 at 11:59pm
Code FR4: $25 off $275
Expiration Date November 30, 2021
Code TAG: $15 off $150
Expiration Date Unknown
Code SAE: $15 off $150
Expiration Date Unknown
Code PTT: $10 off $100
Expiration Date Unknown
Code Q63: Free Shipping/Handling over $99
Expiration Date Unknown
Our friend and colleague F-Class John tests some of the finest reloading and shooting equipment you can buy. Recently he added the impressive Henderson Gen 3 Powered Trimmer to his inventory of tools. John is now a Henderson fan. He likes the speed, precision, and repeatability of the $779.00 Henderson machine, which trims-to-length and chamfers the case mouth all in one pass. Unlike some other trimming tools, the Henderson indexes off the overall case length NOT the shoulder. John found this worked just fine for his .284 Winchester brass, which has all been full-length sized prior to trimming.
John liked the precision of the Henderson trimmer and the overall design of the machine, which offers good ergonomics and very precise alignment of the cases. Cycling is smooth and positive, as you can see from the videos. Fit over the pilot was fine for John’s .284 Win brass, but he notes that other users may need to expand their case necks appropriately to fit their pilot.
Watch the video to see the Henderson trimmer in action. The dual, parallel horizontal support shafts provide precise alignment of the case as it moves inward toward the cutter blade. The Taper-Lock cutter provides a 14-degree inside chamfer and 30-degree outside chamfer. The trimming process is very consistent case after case, and the Henderson’s design captures brass shavings effectively.
Testing Trim Length Consistency — Henderson Shows Superb Repeatability
John did a separate quick test to demonstrate the trim length consistency of the Henderson unit. Measuring with digital calipers, John found that he could easily hold case overall trim lengths within .001″ (one-thousandth). The consistency was excellent even when trimming cases very quickly. When trimming .003″ off his cases, John said the Henderson showed superb repeatability. Henderson promises the trimmer “will repeat to within 0.002″ with same brand brass”, and John was able to hold 0.001″ length consistency.
Another Henderson owner posted: “I love mine. I like [the] consistent trim length with the positive stop. [Doing] the trim, chamfer, and debur all in one step sure makes the process nice and easy! I also immediately noticed the problem with the pilot on the cutting head with my sized cases. I just polished the pilots on my cutting heads with some fine grit sand paper a little at a time till I got it perfect for my preferred neck tension setting! I’m very pleased with my purchase of the Henderson precision trimmer.”
Henderson Power Trimmer vs. Giraud Power Trimmer
After he tested his new Henderson trimmer, F-Class John compared the pros and cons of the Henderson vs. his other high-volume power trimmer, a Giraud. He likes both machines, but now favors the Henderson for trimming his .284 Winchester match brass. He found that his ES/SD dropped a bit for brass trimmed with the Henderson vs. brass trimmed with the Giraud. With the Henderson-trimmed brass, John achieved an ES of 15 fps for 49 shots. That’s mighty impressive (see photo at right).
But the Giraud does have it’s advantages. It can work with calibers above .338, and it is very fast. One viewer of this video commented: “The Giraud is insanely fast if you aren’t only loading insane precision ammo. I borrowed one when I first started reloading and immediately ordered one. I’ve trimmed somewhere between 40-50k .223 cases. You can just rip through them while watching TV or listening to a podcast. It trims to length consistently less than +/-.001 all day.” The Giraud also indexes off the shoulder while the Henderson trims based on Cartridge Overall Length (OAL).
Henderson Gen 3 Trimmer Details
The Henderson Trimmer is available from HendersonPrecision.com for $779.00. When ordering, you must select a caliber and a collet size. Expect to wait a bit for delivery, depending on the cartridge type(s) you load. Available calibers are: .223, .243 (6mm), .25, .264 (6.5mm), .277, .284 (7mm), .308, and .338.
Product Description: The Gen 3 powered case trimmer uses a powerful, single-speed DC motor. The DC motor is extremely smooth and quiet and powers the spindle at around 1700 rpm. The enclosed aluminum motor mount shroud bolts directly to the bearing housing. The 90-volt DC motor offers maximum torque at 1700 rpm where you need it most. The motor has an in-line on/off switch for easy control. The Tri-Trim case trimmer includes one Henderson Precision Taper-Lock cutting head with Forster pilots as well as one Forster collet. The Taper-Lock cutter provides a 14 degree inside chamfer and 30 degree outside chamfer. The following cutter heads are available: 224, 243, 25, 264, 277, 284, 308, 338.
Need a simple, easy-to-use drop chart for your rifle? Something you can tape right to the buttstock? Then check out Hornady’s handy Online Ballistics Calculator. This user-friendly calculator will compute your drops accurately, and output a handy “Cheat Sheet” you can print and attach to your rifle.
Here’s how it works. From the Ballistics Calculator Page, first select 4DOF or Standard. Then simply input G1 or G7 BC values, muzzle velocity, bullet weight, zero range, and a few other variables.
Click “Calculate” to view the full chart (shown below). Then click “View Cheatsheet” and the simpler, 4-line Drop Chart (shown above) appears. Click “Print” and you’re done!
The online ballistics caculator is easy to use. You can select the basic version, or an advanced version with more data fields for environmental variables (altitude, temperature, air pressure, and humidity). You can also get wind drift numbers by inputing wind speed and wind angle.
Conveniently, on the trajectory output, come-ups are listed in both MOA and Mils — so this will work with either MOA clicks or Mil-based clicks. There are more sophisticated ballistics solvers available on the web (such as the outstanding Applied Ballistics Online Calculator), but the Hornady Calculator is very simple and easy to use. If you just want a basic drop chart, you may want to check this out.
Nosler now offers the Nosler Reloading Guide #9, the latest in a respected series of hardback Nosler load manuals. This 800-page guide covers 101 cartridge types. New in this edition you’ll find the popular 6mm Creedmoor, 6mm XC, 6.5 PRC, and 7.62×39, along with 20 Nosler, 22 Nosler, 24 Nosler, 27 Nosler and 33 Nosler. This new guide draws from thousands of hours in the Nosler Ballistic Lab, along with the experience of many respected experts.
The book is available now for $27.99 at Grafs.com. In addition, much of the book’s latest load data is available for free on the Nosler.com online LOAD DATA Center. But to get ALL the data, PLUS the technical articles, you’ll need to buy the book.
The Nosler Reloading Guide 9 Reloading Manual provides load data for 101 rifle and handgun cartridges with hundreds of new powder additions. A comprehensive data set for today’s reloader, this manual is current with every bullet that Nosler offers through 2020 from 17 caliber up to 458 caliber in the rifle section and 9mm up to 45 caliber in the handgun section. Nine new cartridges were added to this manual. These include: 20 Nosler, 22 Nosler, 24 Nosler, 6mm Creedmoor, 6mm XC, 6.5 PRC, 27 Nosler, 7.62×39 and 33 Nosler. Also new for the Nosler Reloading Guide #9 are cartridge introductions written by veteran outdoor writers and industry tech experts. The 800-page book also has helpful “how-to” sections such as “Getting Ready to Reload”.
Q. Why Buy a Book when Load Data is Available Online from Powder Makers?
There are good, solid reasons to buy print-format loading guides produced by bullet-makers. If you go to the Hodgdon online Reloading Data Center you’ll only find loads with Hodgdon, IMR, and Winchester powders — the key brands they sell. In a book such as this Nosler #9 or the Sierra Reloading Manual, you will find loads with a much wider selection of powders including Vihtavuori, Alliant, Accurate, Norma, Ramshot, and other brands. You won’t find a Reloder 16 or VV N140 load on Hodgdon’s website.
In addition, it is handy to have loads in a print edition which is easy to access on your load bench. You don’t need a computer or an internet connection. And using a book is often faster than a web interface when quickly scanning through a variety of bullet choices for a cartridge.
Along with the Nosler #9 Manual, here are four other recommended Reloading Manuals:
Report by NRA-ILA
In recent weeks, Americans have rightly become concerned over a somewhat obscure ATF recordkeeping regulation that has a profound impact on gun rights. If gun control advocates get their way in changing this federal regulation for the worse, altering how ATF maintains these records… American gun owners would find themselves subject to what amounts to a backdoor gun registry.
The type of electronically searchable database the ATF is seeking to develop would amount to a partial firearm registry. Firearm registries facilitate firearm confiscation.
Federal law requires those who purchase a firearm at a Federal Firearms Licensee (gun dealer or FFL) to fill out a form 4473. This record of the firearm transfer is then stored by the dealer on their premises. This creates a system whereby if a gun is found at a crime scene ATF can trace the firearm to the last retail purchase. However, since the records are stored with each FFL, the system is decentralized in a manner that protects against government abuse of gun owner data.
Gun dealers are required to maintain 4473s for 20 years. When a dealer goes out of business they must send their last 20 years of records to ATF’s National Tracing Center to facilitate firearm traces. Some of ATF’s materials appear to deliberately omit the 20-year requirement, seemingly in the hopes that FFLs will send all of their records to the National Tracing Center, regardless of age.
Under this system, over a million out-of-business dealer records are sent to ATF each month. Records obtained by gun rights advocates show that in 2021 ATF processed a staggering 54.7 million of these records.
ATF proposed rule 2021R-05 would make this record-keeping requirement more burdensome for FFLs and diminish gun owner privacy. Under the proposed rule, FFLs would be required to maintain 4473s indefinitely and relinquish all such data to ATF upon going out of business. NRA-ILA is opposed to this rule change.
The type of electronically searchable database the ATF is seeking to develop would amount to a partial firearm registry. And as all gun rights supporters and gun control advocates know, firearm registries facilitate firearm confiscation.
This understanding was at the heart of the debate over the Gun Control Act of 1968 and the development of the current recordkeeping system. In 1985, Sen. James McClure (R-Idaho) explained, “The central compromise of the Gun Control Act of 1968 — the sine qua non for the entry of the Federal Government into any form of firearms regulation was this: Records concerning gun ownership would be maintained by dealers, not by the Federal Government and not by State and local governments.”
—————–
The National Tracing Center could take another step towards a firearm registry if anti-gun lawmakers criminalize the private transfer of firearms — sometimes referred to as universal background check legislation. By funneling more firearm transfers through FFLs, lawmakers would create additional opportunities for recordkeeping on firearms and gun owners that could end up in the National Tracing Center database.
Gun owners have every reason to jealously guard information pertaining to firearm transfers. NRA-ILA will continue to work to help ensure gun owner privacy and to keep gun owners apprised of the ongoing attempts to cobble together a backdoor firearm registry.
Thanksgiving is just one week away. What better way to celebrate the Thanksgiving season than to practice your marksmanship shooting some bearded gobblers (of the paper variety). Here’s our custom Turkey Target, ready for family fun. This special Turkey Bullseye Target was created by our friend and Forum member Pascal (aka “DesertFrog”). CLICK HERE for FREE Turkey Target.
If you prefer color targets, here’s another turkey target, courtesy of the NRA. Hone your skills on a trio of turkeys. The target features three red bullseyes, centered on the gobblers. You can print the target in black and white, but they look best in color. Click the image below to download a FREE printable PDF file.
Get a Full Set of Animal Targets
For your convenience, we’ve packaged the Turkey Target along with five (5) other varmint/animal-themed targets. These are all offered in .pdf (Adobe Acrobat) format for easy printing.
The popular Talladega 600 Match is running this week (November 15-21, 2021) at the CMP’s Talladega Marksmanship Park in Alabama. Our friend Paula Crenshaw is at Talladega this week, shooting the match both as an individual and as a member of a Women’s Team. Paula says there are quite a few lady shooters at the event. Here are some images from the match. Paula, who holds the Distinguished Badge, is a member of the CMP Board of Directors.
The 4-member women’s team included Paula Crenshaw, Meredith Grant, Ashley Kennedy-Foster, and Jeannie Redicker. Ashley and Jeannie are in the photo above shooting prone. This foursome finished 4th in the team match.
Notably, in the Congressional 30 match, five women made the top 30: Haley Robinson (4th); Paula Crenshaw (15th); Ashley Kennedy-Foster (24th); Jeannie Redicker (26th); and Rachael Miller-Lansdown (29th). The Congressional 30 Overall Winner was James Fox while the High Junior was Anton Van Hoven.
The Talladega 600 includes a wide variety of popular CMP Matches:
BENCHREST GARAND MATCH
RIFLE MARKSMANSHIP 101/M16 MATCH
PISTOL MARKSMANSHIP 101/M9 MATCH
GARAND/SPRINGFIELD/VINTAGE/MODMIL MATCH
CONGRESSIONAL 30
RIFLE EIC MATCH
4-MAN TEAM MATCH
CARBINE MATCH
RIMFIRE SPORTER BENCHREST MATCH
HIGH POWER DIXIE DOUBLE MATCH
VINTAGE SNIPER TEAM MATCH
RIMFIRE SPORTER MATCH
M1A MATCH
CMP MATCH PISTOL 2700
CMP AS-ISSUED 1911 PISTOL MATCH
MILITARY & POLICE PISTOL MATCH
CMP .22 RIMFIRE PISTOL EIC MATCH
EIC PISTOL MATCH
Additional events include versions of prestigious National Trophy Matches, such as the Congressional 30 (with the same Course of Fire as the President’s 100 Match) and the Dixie Double High Power Match (mirrored off of the Hearst Doubles Match).
Electronic Targets Speed Up Matches at Talladega
Kongsberg target systems are used at the Talladega Marksmanship Park. Each firing point of the 500-acre facility is equipped with a state-of-the-art KTS electronic target and scoring monitor. This speeds up relays and eliminates the need for competitors to do pit duty to pull and mark targets. Located beside the shooter on the firing line, each monitor allows the competitor to see his/her shot location and score immediately.
CZ has just introduced the new CZ 600 line of centerfire rifles. The series includes four unique models, with a variety of stock types, barrel profiles, action lengths, and chamberings. User-friendly CZ 600 features include 60-degree bolt throw, adjustable triggers, and the ability to swap barrels/chamberings using optional conversion kits. The CZ 600 Series includes four brand new models: Alpha, Lux, Trail, and Range.* These are designed for accuracy, modularity, and smooth cycling. Expect CZ 600s at dealers in early 2022.
Controlled-Feed Action with 60° Throw: CZ 600 Rifles have a 60-degree bolt throw. This cycles faster than a 90-degree bolt, with more clearance between bolt and optic, allowing for larger scopes. All CZ 600 models boast an oversized bolt knob for improved control with gloved hands. And the actions have controlled-round-feed. The 2-position safety allows bolt cycling with the safety engaged.
CZ USA offers Alpha, Range, Trail, and Lux CZ 600 versions. In Europe CZ offers a fifth model, the “Ergo” model, which is mentioned in this video.
Barrel Conversion Kits: Optional barrel conversion kits offer the ability to change cartridges (within the same-sized action) by swapping barrels, bolt face, and magazines, without the need of a gunsmith. This lets shooters use one rifle for a multiple shooting disciplines. A detachable magazine allows quick mag changes and secure magazine retention, with an optional locking feature. On most CZ 600 models, magazines can be topped off through the ejection port for convenience.
User-Adjustable Trigger: The Alpha, Range, and Lux have a user-adjustable, single-stage trigger, while the Trail model utilizes a two-stage trigger. Trigger pull can be adjusted without removing the chassis from the stock. A 4-position dial sets trigger weights from 1.3 to 3 lbs., moving over just 1/2 lb. per click.
CZ 600 Series Rifles Features:
Steel and Alloy Actions, 3 sizes
60-Degree Bolt throw
Vertical two-position safety
Controlled round feed with short extractor
Three barrel profiles: Light, Semi-Heavy, and Heavy
Adjustable trigger – no disassembly needed, 4 weights
Picatinny Rail or Remington 700 scope bases
Detachable magazine with optional lock
Caliber conversion kits (sold separately)
Accuracy guarantees: 3/4 MOA (Range), 1 MOA (Alpha, Lux), and 2 MOA (Trail)
CZ 600 Models — Alpha, Lux, Range, and Trail
CZ 600 Alpha — CZ designed the Alpha as a “do it all” rifle with guaranteed sub-MOA accuracy for a modest $749.00 MSRP. A light-weight aluminum receiver balances the semi-heavy barrel for a 7.3-lb overall weight (before optic). The CZ 600 Alpha is designed to be versatile, durable, and reliable. Available chamberings include .223 Rem, .224 Valkyrie, 6mm Creedmoor, 6.5 Creedmoor, 6.5 PRC, 7.62×39, .308 Win, .300 Win Mag, and .30-06 SPRG.
This Petersen’s video features the CZ Alpha model on a hunt in Central California
CZ 600 Lux — The refined lines and traditional style of the CZ 600 Lux reflect a long, proud legacy. The Lux features a steel action and oil-finished select-grade walnut stock. The steel receiver is drilled and tapped for Rem 700-pattern bases. The Lux model comes with a sub-MOA guarantee. Weight is 8.2 lbs. in 308 Win without scope.
CZ 600 Range — The Range model, with its cold hammer-forged heavy barrel, was designed to give precision shooters outstanding accuracy. The CZ 600 Range features the best accuracy guarantee ever offered by CZ: Sub-3/4 MOA guaranteed at 100 meters, for 5-shot groups with match-grade factory ammo. This accuracy is verified by CZ.
CZ 600 Trail — The CZ 600 Trail is a very light-weight, compact rifle, weighing just 6.1 lbs. before optics. The Trail uses AR-15 compatible mags for .223 Rem with CZ Bren 2 magazines for the other chambering, 7.62×39. The lightweight Trail model offers AR ergonomics along with ambidextrous mag release and safety lever similar to AR-platform rifles.
CZ 600 Trail Model — Initial Field Test
*In Europe CZ offers a fifth CZ 600 model, the “Ergo” model. See the first video linked above.
The 
After he tested his new Henderson trimmer, F-Class John compared the pros and cons of the Henderson vs. his other high-volume power trimmer, a Giraud. He likes both machines, but now favors the Henderson for trimming his .284 Winchester match brass. He found that his ES/SD dropped a bit for brass trimmed with the Henderson vs. brass trimmed with the Giraud. With the Henderson-trimmed brass, John achieved an ES of 15 fps for 49 shots. That’s mighty impressive (see photo at right).
Federal law requires those who purchase a firearm at a Federal Firearms Licensee (gun dealer or FFL) to fill out a form 4473. This record of the firearm transfer is then stored by the dealer on their premises. This creates a system whereby if a gun is found at a crime scene ATF can trace the firearm to the last retail purchase. However, since the records are stored with each FFL, the system is decentralized in a manner that protects against government abuse of gun owner data.
