REMAGE Project — Building Rem 700 with Pre-Fit Barrel

Barrel nut system allows “Pre-Fit” barrel installation on a Remington action. CLICK photo to zoom.

REMAGE Project Report by Bill, Rifleshooter.com Editor
Installing a new barrel on your Remington 700 (especially without a lathe) may seem like a daunting task, but thanks to companies like McGowen Precision Barrels and Criterion Barrels there are easier alternatives. By adopting a Savage-style barrel nut on a 1 1/16″ thread for a Remington 700 receiver, pre-chambered (aka “pre-fit”) barrels can be easily swapped with just a few hand tools. This system is sometimes called a REMAGE conversion (for “REMington savAGE”). With simple tools a “Pre-fit” 6mmBR-chambered barrel was installed on the author’s Remington action — no machining or lathe-work required.

Using a few tools from Brownells: Remington 700 Action Wrench, Barrel Vise, Go and No-Go Gauges, Recoil Lug Alignment Tool, and a Savage Barrel Nut Wrench, I was able to swap the .308 Winchester barrel off of my Remington 700 short action and install the new McGowen pre-fit, pre-chambered barrel, converting it to a tack-driving 6BR (aka 6mmBR Norma).

The existing barrel is simply removed from the action (normally the hardest part) and the new barrel is screwed on with the Go Gauge in place. After headspace is verified with the Go Gauge, the barrel nut is tightened against the action and you are off to the range. It takes all of the machine work out of the barreling process.

Note: Because barrel nut has a slightly larger diameter, some stocks may require minor inletting. Also, if you are shooting fired brass from another rifle with the same chambering, you should FL-size the brass before loading it for your new pre-fit barrel. And always check the set-up with a dummy round loaded to normal cartridge length BEFORE you head to the range. With Pre-Fits, the freebore should be adequate for your cartridge, but always check and adjust your seating depth as needed.

My McGowen Remage barrel looks and shoots great. I’ve written two longer articles that provide greater detail about this project. To learn more about how the barrel was installed, read: Rebarrel a Remington 700 without a lathe: McGowen’s Remage barrel conversion. To see how the rifle performed at the range, read: McGowen Remage Barrel Review: Spoiler Alert — It Shoots!.

Bill has been a serious shooter for over 20 years. A former Marine Corps Sergeant, he’s competed and placed in High Power Rifle, ISPC, USPSA, IDPA, 3-Gun, F-Class, and precision rifle disciplines. In addition to being an NRA-certified firearms instructor and range officer, Bill has hunted big game in North America, South America, and Africa. Bill writes extensively about gunsmithing, precision rifles, and the shooting sports on his blog, Rifleshooter.com.

Similar Posts:

• 6mmBR “REMAGE” Conversion by Rifleshooter.com
• “REMAGE” Remake — Converting Remington to Barrel Nut System
• REMAGE Pre-Fit 6mmBR Conversion — How to Do It
• McRee’s Pre-Fit Barrel Option for Rems and Rem Clones — $412.50
• 40% Off Savings on Savage Barrel Nut Wrench

Tags: Barrel nut, McGowen Barrel, Remage, Rifleshooter.com, Savage Remington Barrel